Need to re work project saved in Adobe Premiere 5.1 (PC) on CS6 (MAC)

I need to re work project saved in Adobe Premiere 5.1 (PC) on CS6 (MAC). Thanks for any advice

You will probably need a PC version of Premiere Pro newer than CS3 in order to open the file, and then save it again as the newer version. From there you could possibly open that new version in CS6 on the Mac.

Similar Messages

Error message: previous version saved in adobe premiere pro

Greetings all,
PrEl 7 shut down unexpectedly when I tried to save a portion of my timeline as an avi. When I re-opened it, I got the error message previous version of this project saved in adobe premiere pro and it would not allow me to open it.
What can I do to restore the project; I'm in the finishing stages.
Thanks,
Antoinette

There have been a couple of similar threads, and some are fairly recent. I do not recall if there was ever a resolution. It also seems that people have looked at the XML code in the PREL files, and their header info clearly stated PrElements, and not PrPro, yet something is not being read correctly by PrE.
Now, do you have any AutoSave versions of the PREL? Note: the default is five AutoSaves, and these are overwritten, once one has gotten the five. Check the Time/Date of each, as 003 might be later than 005.
If I can find some of those threads, I will post links to them, and also refresh my memory on any solutions.
Good luck,
Hunt

Importing Cyberlink Power Director project files to Adobe Premiere

I am trying to switch from Powerdirector to Adobe Premiere because I felt like a needed a more powerful video editor. I already have a project that I started in PowerDirector and I don't really want to start it over from scratch or just export what I have into a rendered video file. Is there any way to import these sort of project files to Adobe Premiere, or some sort of converter?

No, you have to start from scratch, or better, finish in Powerdirector and only start new projects in PR.

Graphics card Quadro K4200 don't work with cuda in Adobe Premiere CS 6 version 6.0.5. Maybe they are bad drivers for graphics card? How to solve this problem?

I have purchased graphics card Quadro K4200, but graphics card don't work with cuda in Adobe Premiere CS 6 version 6.0.5. Maybe they are bad drivers for graphics card? How to solve this problem?

Did you use the nVidia Hack http://forums.adobe.com/thread/629557

Adobe Premiere Elements 11 and AAMEE on Mac

I am trying to distribute Adobe Premiere Elements 11 serialized on a Mac and when I attempt to do this via AAMEE 3.1.X, I receive a message that the media is not recognized. Can Adobe Premiere Elements 11 be distributed in this fashion?
Thanks

Yes, you can package PSE/PRE 11 using AAMEE but not 3.1 version. You need to use AAMEE 2.1 to do so. Check the below link, it should give what you need here.
http://helpx.adobe.com/photoshop-elements/kb/silent-install-instructions-photoshop-element s.html

I need to install InDesign CS5 but my Adobe Application Manager is only showing CS6

I need to install InDesign CS5 but my Adobe Application Manager is only showing CS6

If it is only possible to download and install the most current version please let me know as well. We need to get this out to our client ASAP.
Or please let me know if I am asking this in the wrong place

Do I need to uninstall pinnacle studio before installing adobe premiere elements 12

I'm thinking of changing from Pinnacle Studio and switch to adobe premiere elements 12, but want to try adobe. Do I have to uninstall Pinnacle, or can both programs exist together?

you do not need to uninstall pinnacle studio before installing premiere elements.

Motion blur track not working with me on adobe premiere cc update

i've updated my adobe premiere cc on my imac. i can't see the shape button or the play button on my effects if i want to use motion track blur or mosaic or any of effects on adobe premiere cc.
help me please!!!

i have adobe premiere cc v7.2.2
updated yesterday. still i can't see the play and shape button in my effects. as fast blur.

Adobe premiere elements 10 install error on mac

I have tried to install the Premiere elements 10 on mac and fails every time with the following error
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 8 error(s), 7 warning(s)
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
----------- Payload: {68FE2517-2E45-4B03-8241-D0634F43878B} Smartsound1 1.0.0.0 -----------
ERROR: DW006: Apple Package failed to install successfully.
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Smartsound3: Install failed
ERROR: DW050: - Photoshop Camera Raw for Elements 10: Install failed
ERROR: DW050: - Smartsound1: Install failed
ERROR: DW050: - Adobe Premiere Elements 10: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Premiere Elements 10_LangPacken_US: Install failed
ERROR: DW050: - Smartsound2: Install failed
I have downloaded and installed the Adobe support Advisor and it reported the following ,.
Trying to select the link in the report above takes me to the following ..
http://helpx.adobe.com/creative-suite/kb/installation-error-dw050-dw020-cs5.html
Which reports an error in a Windows environment ? and advices we ignore this error. However the installation does not go any further.. it quits and does not ask for the other disks to be installed.
Its been several times I have already tried to install and in between every install a restart of my mac pro
Any help would be appreciated.
Thanks
Murali Vallath

You will find best advice over on the video forum. Most of us here are photographers.
Click on the link below and copy and paste your question again. Good luck.
Video questions: Click here for Premiere Elements Forum

Need to print worked hours saved with notes

i saved my timesheet with notes and now i need to print it.
Thanks
Art

With a note selected, at the bottom are the following options.
Email the note, delete the note, or forward to the next note available.
Select the envelope icon which will create an email for the note.
Address the email to an email address that you access with an email client on your computer.

Does anyone know what the cost of upgrading a mac book pro (2008) to multicore intel processor with 64 bit support and 4 to 8 GB? I need to do some mobile editing on Adobe Premiere CC but my current laptop says it can't support it.

cost of upgrading mac book to mutilcore intel prcessor with 64 bit support and 4 gb

Processors can not be upgraded. Therefore youa re looking at upgrading to a new machine.
http://store.apple.com/us/mac

Re: Adobe Premiere Pro Help | Trimming clips (CS6)

How do we access just the P Pro CS6 Help Reference instead of all this community content?

Regarding changes to Help, please read this document first: http://helpx.adobe.com/x-productkb/global/community-help.html
[Jeff Sengstack]
How do we access just the P Pro CS6 Help Reference instead of all this community content? When will Help arrive?
Jeff, this is the Help reference. It arrived the moment we shipped CS6. There is tons of new writing here for the CS6 trimming features here on this page. The documentation covers all the new features. I also have some tutorials plugged in. What is your specific complaint about the page for trimming in CS6? If there is a problem with the content being incorrect, or missing info, I can fix it. I cannot fix the way that the new Help system is designed, however, I can provide feedback to my superiors.
Also, we've been plugging in supporting community content into Help along with reference content for quite some time so that should be no surprise. We hope it is a help, rather than a hindrance. These articles and tutorials are from authors I worked with during prerelease, so tutorials are vetted, and the content is valid.
[Jim Simon]
Can't yet.
You can access the entire Help system for Premiere Pro here: http://helpx.adobe.com/premiere-pro/topics.html or just press F1. This page (called the "Topics Page"), although different in appearance, has very similar chapter topics that were found in the CS5/CS5.5 Help table of contents.
The only thing you cannot yet do is download the entire Help system as a PDF. That feature is coming next month: http://helpx.adobe.com/content/help/en/x-productkb/global/cs6-help-pdf-available-june.html
[shooternz]
I am kind of staggered that Adobe launched and released without Help Files for these CS6 products. Particularly in the case of SpeedGrade where I needed most Help. New and unfamiliar applications need Help Files for Users to get up to speed! Adobe are now relying on the cool Tutorial Videos (which have great value) but are hopeless in terms of such basics as "Setting Up" and trouble shooting. "RTFM"...What FM? I have put SpeedGrade on the backburner because of this. (I simply can not resolve some set up issues due to lack of available goto info.) May not get back to it for sometime actually.
That's not true, shooternz. Help files are available for every Adobe product. Just press F1. For Premiere Pro, the list of topics (table of contents) is here: http://helpx.adobe.com/premiere-pro/topics.html Keep in mind that this is a brand new Help system, and it took extra effort to complete the content and make sure that the system functioned properly. If there are any problems with the system, please let me know. For example, search needs to be improved and that is something we know about and are working on.
SpeedGrade Help is sparse because we just got the product 6 months ago. Given our time constraints, there simply was not enough time to develop a full Help system. On behalf of Adobe, I apologize for not being able to provide full documentation for SpeedGrade. I assure you, though, that a full set of Help documentation for SpeedGrade will be available later this year. In the mean time, if you have questions about SpeedGrade, check out the user-to-user forum here: http://forums.adobe.com/community/speedgrade
[Jeff Sengstack]
The issue is not how to access Help (pressing F1), it's how to access the old Help reference. The new Help system is community-oriented and does not include access to the old Help reference file.
Do you mean you want the CS5/CS5.5 Help without the CS6 content? It's available here on PDF: http://helpx.adobe.com/premiere-pro/archive.html
The "new community-oriented" Help is not new. We've been adding community content along with the reference content for some time now. If you mean to say the Help is only created by the community, that is totally incorrect. I am the writer for Premiere Pro, I include all the details of the new features, and I cull content to support the writing.
If one noodles around in community help, one will find bits and pieces of the old Help reference but no single source.
The previous Help content is included verbatim into current Help. It just has CS6 content added to it. It also "looks different" and is more search based. Again, search the PDF if you need to see the CS5/CS5.5 Help without CS6 content.
That is unfortunate, because Community Help is a cobbled-together, clumsy means to find solutions. Wheras, when using the old Help reference, it was a lot easier to quickly track down answers to basic questions.
I would really like to pinpoint what you are missing from CS5/CS5.5 Help. Why is it harder now to find what you need? The main differences I see is that there are no "next page" buttons, or hierarchy links. Is this what is bothering you? By the way, you can return to the topics page by clicking "Adobe Premere Pro Help" in the upper left of the page.
[Wodehouse]
I thought something had gone wrong with Master Collection installation because not a single product has any HELP guide!!!!
Help systems are no longer managed by the Community Help Client and are now handled by the Adobe Help Manager. There may be edge cases where Help might not appear in previous systems. Check the Adobe Help Manager and see if you can have access to the Help that you want. More on the Adobe Help Manager in this thread: http://forums.adobe.com/thread/1000134

Adobe Premiere CC play delay with newest Mac Pro.

Anyone have issues hitting play on the timeline (out of a multicam edit) and there is a few second delay (or more) when the head starts to react?
I have a late 2013 Mac Pro, six core, 6gig dual v-ram, 64GB ram and six disk array partitioned to two, via a Thunderbolt 1 interface where the assets are held.
Needless to say, this adds a lot of time to the editng. FCPX has no delay but I couldn't get the multicam to sync up, even going through Pluraleyes.
Thanks!

Hi Molo342,
molo342 wrote:
I have iMac with system up to date, my Adoebe Premiere CC crashes every 10 minutes when working on the project. Any ideas?
Usually, it's this: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later). It's caused by some methods of updating OS X.
BTW, most people are operating 8.1 with no issues, myself included.
A majority of the issues people are having are updating complex project files from 8.0.1 to 8.1. Please don't update project files or your OS when in the middle of a project. This rule of thumb is very important to safeguarding your project file.
If you must go back to the previous version, please check out my blog post here: Install a previous version of any Creative Cloud application
Thanks,
Kevin

Adobe Premiere Pro Help | Adjustment Layers (CS6)

This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/help-tutorials-adjustment-layers.html

Why the circle effect does not work while using the new adjustment layer in Premiere Pro CS6? I have tried to animate circle with its changing radius. Everything is working fine on the screen but the effect itself, it takes the first value and stays with it even if the circle radius value changes up and down. I have placed a circle at the specified coordinates on the adjustment layer and changed its radius every three second several times. The adjustment layer is placed no the video track two above the still image of a map sitting on the main video track.
Christophe

Adobe Premiere Elements 0.9 project crash, HELP!

This is the first time I am using these forums, so I hope I posted this in the right sektions.
I need help and solutions for a Project which constantly crashes on my Adobe Premiere Elements 0.9. This program has been awesome and helped me create some projects and videos successfully, up until.... well for about 3 days ago when my latest project crashed when I had just antered and checking the storyboard etc, triggering a "Serious Error" message and then it shuts down. I try again and again, but everytime I try to put something (any sound or video etc) on the storyboard and start working etc the same damn "Serious Error" message and then allways shuts down. It's allways this same and only project (which has worked fine before) that crashes like this...
In an attempt to first solve the problem myself I went through the Premiere Elements 9 files and deleted finnished projects and automatic saved process on projects etc, but still won't work even better... The funny thing is that when I open another project (a finnished project I left saved just in case) and go through the storyboard there and messes around a little and such, it won't crash nor trigger the same message as my latest project. And that program even has some effects on every footageclip on it too, but still it works fine. Haven't touched the program or the program until and since yesterday night to give it some rest but it still won't work, the project just keeps crashing like when and since it first started a few days ago.
I have also read through and tried some things from this Help/Troubleshoot page:
http://helpx.adobe.com/premiere-elements/kb/troubleshoot-damaged-projects-premiere-element s.html
I have so far been doing 1 and 2 of the "Beginning Troubleshooting", otherwise I have been reading it all and such. I am also kinda afraid to do the 3 of the first quests because I worked so hard on this project and even tough it just keeps crushing, I'm afraid to lose it. Other, I have deleted audios and such from my filegallery on my Adobe Premiere Eements, stuff I don't need anymore because its projects are already done. After I did that I also tried to create a new project just for testing. The amazing this about this is that this the new created project I created works just fine, I could do all kinds of the stuff, effects and advanced editing which I did on the same project before it started crushing. Tough I didn't save that test-project since I didn't find a reason to since it worked so good. And so the thing is that I can start and create a new project and start working and do usual stuff on it with no problem, same when I open up another project and do stuff, it all works just fine! It is just this one and only project that keeps crushing with this "Serious Error" message, all the time... Does anybody else have, or has had the same problem? What could the problem and error be and how to fix it?
This crushing project do has some effects on every footageclip/videoclip on it, to set the right mood for the musicvideo I'm making. I am making a musicvideo, and I haven't even done the half of the project/video. The song I am making this musicvideo with is about 00:07:32 in length, and (tough this detail may have no influence or meaning) the music is Symphonic Metal. The actual file of the song is 6,96 MB in size. This is also not the first time I've done such projects with such long songs on this same program either, one of my last videos I managed to successfully make and create a musicvideo with a song which was about 13 minutes and 30 seconds in length, and I also used effects on pretty much every videoclip on that project too.
The current filesize so far on the actual project.prel-file of my project that keeps crushing is 9.73 MB.
I am also using Adobe Premiere Elements and doing this troubleing, crashing project on a PC, a Fujitsu Windows (I believe Windows 7, or even updated to a newer version?). It has a regular ATI-card. The computer also has 2 modems and there's still some pretty GB amount free on them. The PC's main system also has a RAM in 6.00 GB and the operative system is the 64-bites.
In short, the PC should just fine be able to handle Adobe Premiere Elements 0.9 and all its projects, just as it has handled it all before plus all my PC games at that. So it must be something with my Adobe Premiere Elements and that specific project which is the problem, but what is the problem and the serious error and how to fix it?
Could it help to save and create the actual video in this crashing project, delete that project then start a new project, upload and put in the videofile of the crashing project in that new project and then continue from there?
In either cases, I need help with this. Please, help!

Thanks so much for your reply, Steve!
Even tough I trust you guys enough here on the official Adobe site/forums to answer those questions as best I can, I am at the same time not very fond of giving away too much information because of safety. I understand I have to If I'm to recieve the accurate answers and solution, but as this is the internet you can never know. But again, I trust you guys enough on here and thus I'll try to answer those questions as best I can, even tough I am not very good with such stuff about computers. The PC I am using is also not only mine, it is the family computer also which me and my whole family uses.
The operating system on my computer (according to the computer propotions etc) is a 64-bites operating system and the computer/PC is also a Windows 7 Home Premium.
The processor the computer/PC have is a Intel(R) Core(TM) i5 CPU and the RAM is 6.00 GB. However, (and I hope I make this understandable because the computer/PC is in swedish)the subscore of RAM in the computer's Performance-Classification/Ranking is 7,5. The processor subscore is 7,3 per second. And the free space? Well, we have two modems, let's say a modem A and a modem B. Adobe Premiere Elements 0.9 is set to save all its stuff etc on modem B, while modem A is the main modem and spaces all main stuff and other things of the computer/PC. Modem A has about 314 GB of free space, while modem B has 207 GB of free space. Modem A's capacity is a total of 489 GB in which 175 GB has been used, the modems filesystem is a NTFS. Modem B is also a NTFS filesystem and its capacity is a total of 439 GB in which 232 GB has been used. And the Disk Cleanup? I believe my that latest ran it for about a few weeks ago. We also have a CCleaner also. But about the Disk Defragmenter, I have no idea. What exactly does a Disk Defragmenter do?
You mean, entering my project that keeps crushing and simply rename it by using "Save As"? If that is what you mean, I dunnow If that actually worked. When I still tried to do stuff and edit the crashing project (tough as said, it hardly took any changes and process before it triggered that message) and then crashed and shut down, and I opened up the program again (trying to open the same project that way), it asked me If I wanted to re-create the missing process from the last crash of the same project. I tried it and it automaticly was renamed to a for example Project.copy. But when I tried to work with that it was to no futher success, the project kept crashing. I haven't renamed the project by "Save As" tough, but I doubt it'll work, I even tried to rename the actual project file in the Adobe Premiere Elements files but nope... the project keeps crashing. But also about the same question, "Save As" under a new name but in its own folder? You mean the actual project folder or Adobe Premiere Elements preview folder of the projects?
My camcorder is pretty old by now, have had it since I turned 15, it has worked pretty good since then. Its model is a Sony Handycam, Carl Zeiss Vario-Tessar OPTICAL 20x. Even tough the last thing maybe doesn't say anything, this is all I know about my camcorder, except that it is a model no. DCR-HC17E PAL. But in that Project which keeps crashing, there are only a few actual camcorder clips used as I am making a Game-MusicVideo and most of the footage of the Video-game (actually a PC game) I'm making a musicvideo of is downloaded from Youtube mostly from a guy I asked permission for to download his recorded footage of the game. I used a Youtube downloader called ClipConverter. As I don't have a SD card I cannot make this footage myself. But some footage I recorded on my camcorder, but If I can find high quality clips and get them, I will. The other footages is actual official trailers of the PC games which also was downloaded from the net. But I can give you the stuffs filetypes and hoping that may help. The downloaded footage which was downloaded by this ClipConverter, are MP4 files. The other stuff (which were official trailers) and most of them are also MP4 files, the others are QuickTime-film files. Many of these downloaded footages and trailers are also in HD quality, at least some of them I think.
The actual filetype ofthe footage I myself recorded with my camcorder are, well.... it says Videoclip in the file. Maybe it is AVI?
The project settings? You mean the settings you set at first when starting as a new project? The general settings are, in editingsettings it is AVCHD 270p square pixel. This is kinda hard for me to tell since everything is in swedish in my program. But these settings has worked perfectly before, same with all files, footages and videoclips I have been using, also all the soundfiles etc. Even the actual crashing project worked perfectly before it started crashing... So why does it so suddenly start crashing now?
The audio is a song I copied directly from its album and CD into the computer/PC and it seems to be in WMA format in filetype.
And lastly, no I haven't rendered the timeline of the project ever, not even on my other projects. What does the rendering do and is useful for? I have very little knowledge of it. Other, I keep the Timeline mode open all the time because I can edit my videos much better with it, but perhaps that editing method make little influence of the actual problem.
Other, yesterday when writing the post and topic, I forgot to mention that I restarded my computer right after I created a new project, that testing project. When finnished with the testing I restarted the computer. Since then I haven't touched the crashing project since now tonight, when checking its settings for this post. I am also right now trying to create and save the actual videofile of it, saving it on my computer. I'll soon see If it's successful without any crashing interruptions, plus that the video itself works and is smooth when I'll play it on Windows Media Player like all the rest of my other videos. I do this just in case I must create a new project to be able to continue with my musicvideo, as the first part of it I worked very hard on.
Other and again, I am still puzzled about why this is even happening, that this project which worked perfectly fine before, just suddenly starts triggering that "Serious Error" message and crashes. And in this program which worked so perfect before. Has this happened to anyone else before? Has anyone else experienced the same issue I have? Is this a knowledgable issue which has solutions and ways to fix it?... :/

Need to re work project saved in Adobe Premiere 5.1 (PC) on CS6 (MAC)

Similar Messages

Maybe you are looking for