Need to reboot every power on

Hi,
(for system info see sig)
This system is working fine except for an annoying problem. Every time I power it on, it freezes at the initial BIOS screen that shows the hard drives, etc. (I have the graphical booting screen turned off.) CTRL-ALT-DEL doesn't work, but if I press the hardware reset button, it restarts, and then boots normally. It always freezes, and it always works fine after resetting.
I have no idea what could be causing this so I don't even know where to start troubleshooting. Any suggestions would be appreciated. Thank you.

Quote from: xmad on 07-November-13, 02:44:11
Had a similar issue with one of our workstations that had an SSD. Updated the firmware and repaired the boot partition and all was well.
I checked and the firmware is the latest version.
Quote
Are there any checkpoint codes showing?
There is this message that flashes briefly right at the start of the first boot attempt:
https://www.dropbox.com/sh/3555wwlqqsepzqh/3nY27Kb9SK/msg.PNG

Similar Messages

  • Cisco switches 3560 need manual reboot after power outages

    Hi everyone,
    In africa we have lot of power outages.
    Working at a very big company with more than 300 switches can be challenging if you have to bring them up by manually rebooting few of them on the property.
    The switches are directly connect via fiber using LH/LX SFP connector to a 4500 Core switch which is on a UPS and does not go down during the outage; only the access layer switches will then need manual reboot....
    Please assist in having a permanent fix on this issue.
    Thank you very much in advance.

    @hdussa:
    Here is the output :
    sh boot
    BOOT path-list      : flash:c3560-ipbase-mz.122-35.SE5/c3560-ipbase-mz.122-35.SE5.bin
    Config file         : flash:/config.text
    Private Config file : flash:/private-config.text
    Enable Break        : no
    Manual Boot         : no
    HELPER path-list    :
    Auto upgrade        : yes
    Auto upgrade path   :
    ===================================================================================================
    SW1#sh  dir flash:
    Directory of flash:/
        2  -rwx        5436  Nov 21 2013 13:08:49 +00:00  vlan.dat
        3  -rwx        4749  Oct 10 2013 09:08:45 +00:00  config.text
        4  -rwx           5  Oct 10 2013 09:08:45 +00:00  private-config.text
        5  drwx         512   Mar 1 1993 00:10:16 +00:00  c3560-ipbase-mz.122-35.SE5
    27998208 bytes total (18636800 bytes free)
    ===================================================================================================
    SW1#sh ver
    Cisco IOS Software, C3560 Software (C3560-IPBASE-M), Version 12.2(35)SE5, RELEASE SOFTWARE (fc1)
    Copyright (c) 1986-2007 by Cisco Systems, Inc.
    Compiled Thu 19-Jul-07 18:15 by nachen
    Image text-base: 0x00003000, data-base: 0x01100000
    ROM: Bootstrap program is C3560 boot loader
    BOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(35r)SE2, RELEASE SOFTWARE (fc1)
    SW1 uptime is 1 week, 1 day, 8 hours, 42 minutes
    System returned to ROM by power-on
    System restarted at 09:58:40 UTC Mon Feb 10 2014
    System image file is "flash:c3560-ipbase-mz.122-35.SE5/c3560-ipbase-mz.122-35.SE5.bin"
    cisco WS-C3560-8PC (PowerPC405) processor (revision A0) with 122880K/8184K bytes of memory.
    Processor board ID FOC1315V4LS
    Last reset from power-on
    3 Virtual Ethernet interfaces
    8 FastEthernet interfaces
    1 Gigabit Ethernet interface
    The password-recovery mechanism is enabled.
    512K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address       : 00:25:46:DE:1F:00
    Motherboard assembly number     : 73-10612-07
    Power supply part number        : 341-0207-01
    Motherboard serial number       : FOC13152YLK
    Power supply serial number      : LIT13060H65
    Model revision number           : A0
    Motherboard revision number     : C0
    Model number                    : WS-C3560-8PC-S
    System serial number            : FOC1315V4LS
    Top Assembly Part Number        : 800-28131-01
    Top Assembly Revision Number    : E0
    Version ID                      : V01
    CLEI Code Number                : COM8C00ARA
    Hardware Board Revision Number  : 0x01
    Switch   Ports  Model              SW Version              SW Image           
    *    1   9      WS-C3560-8PC       12.2(35)SE5             C3560-IPBASE-M     
    Configuration register is 0xF
    SW1#
    Please let me know if you need same output for another switch posing the same problem.
    Thank you very much.

  • IPAD MINI RETINA SCREEN VERSION IOS 7.1.2 can't success download apps , need to reboot every times only can download apps. Is iOS problem or hardware issue.? Local agent switch sale and tech support can't fix my problem.

    I Purchase iPad mini retina screen on July 7 2014 at Malaysia local apple sale agent switch store somehow now my iPad did restore to latest iOS 7.1.2, before that and after also facing 1new issue is my iPad mini cant success download apps and error message show can't download at this time, either retry or click done. My internet is good condition no line down, I reboot my iPad only can download but sometime can't need to reboot twice only can download. Very sad local sale and tech support can't help to solve my problem...

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, tap Settings > General > Reset > Reset Network Settings
    You will have to re enter your Wi-Fi password.
    No data is lost due to a reset.
    If nothing above helped, try here >  iOS: Troubleshooting Wi-Fi networks and connections

  • I upgraded to Maverick and now my mouse pad works sporadically.  I need to reboot every 3-4 minutes.  How can I fix this?

    Has anyone had the problem of their mouse pad working sporadically after downloading Maverick?  I need to "sleep" mine every 2-3 min to get it to work again.  Help

    By "mouse pad" do you mean trackpad?
    Try a SMC reset: Intel-based Macs: Resetting the System Management Controller (SMC)

  • Linksys WRT54GS Ver 5 needs reboot every 10-12 hours after wiring it to LG BD590 Blu-Ray

    Had this router hard wired to a desktop - everything has been fine forever.  Moved it so I could hard wire it to the Blu-Ray player for watching Netflix, etc.  Everything works.  Except the Router needs to be rebooted every 10-12 hours.  Unplugging it for 30 seconds works.  The router seems to be working, but the wireless signal to the other computers in the house, although showing strong, will not connect to the internet, Router is getting its internet straight from the Comcast modem. I have the latest firmware installed in the router.  Any ideas greatly appreciated before I throw this thing out.

    Try to re-flash the firmware on your router.
    Connect the computer with the Ethernet cable to the router.
    Download the latest firmware from Linksys website and save it on your computer. Open the setup page of the router. Click on Administration tab and go to Firmware upgrade sub tab. Browse the firmware file that you have already downloaded and upgrade it on your router.
    After upgrading the firmware on the router, it is recommended that you should reset the router and reconfigure it. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router and reconfigure it.
    Also try to change some advanced wireless settings on the router. Click on Wireless tab and go to Advanced wireless settings. Change the Beacon interval to 75, RTS threshold to 2307 and fragmentation threshold to 2306. Save the settings.

  • I need to reboot my AppleTv every time I use it to get Airplay working

    Hello, I hope that someone there can help me! I just got my brand new Apple Tv 2, but every time I would like to play music or whatever with airplay from my Iphone or my Mac Book, I need to restart it.
    They are all connected to the same wireless router, but I don't see the airplay icon until I plugo off and plugin again the power cable of the Apple Tv.
    It is correctly connected to the wifi, I can use youtube and so on... but the other devices cannot see it...
    If I need to reboot it everytime.. I think I will get bored of use it in a couple of days!
    Greetings from Italy!

    But every single item is correctly connected with the wi-fi, and is working fine in internet.
    The iphone is surfing, the mac book is serfing... the apple tv is sirfing as well!
    But not the mac nor the iphone see the apple tv, and the airplay icon is not showing until I reboot everything...

  • WRVS4400N needs to be rebooted every 24 hours

    I have the latest firmware and I have reset to factory defaults but I still need to reboot the router every 24 hours. Can anyone help?

    Useful info.. Is it possible to change the MTU size on the WRVS4400N?  I rolled back from 1.01.03 to firmware 1.00.16 to see if it makes a difference, however I don't see any MTU settings.  It's possible there are MTU settings in 1.01.03.  There is major difference in the web admin screen between the two.  1.01.03 introduces a more detailed way of seeing what's connected to the WRVS4400N as well as handling Diffserv instead of just ToS/CoS.  There are a few other things to..
    Anyway, if 1.00.16 doesn't resolve my issue then I'll jump back to 1.01.03 and see if there are MTU settings.  BTW, I just disabled UPnP after reading your message.  Hopefully that helps too.
    The odd ting is, I have a Buffalo Wiress N router and never had a single issue.  I got the Linksys for my "lab" environment where I'm doing a lot of VoIP testing.  The other Linksys products (PoE switches, WET200 wireless bridge, SPA-9000 and SPA phones) all work great. The router is the only one giving me odd behaviour.
    Thanks,
    -d
    EDIT: It looks like I found the MTU.  It's not labeled MTU though.  On the "L2Switch" tab there is a selection for "Port Settings" and there is a default entry for "MaxFrame" of 1518.  If my hosts get locked up from the Internet again, I'll change the MaxFrame to your suggested size.  Since I just rolled back to 1.00.16 I want to see if the issue occurs before making the MaxFrame change.
    Message Edited by dfusion on 01-27-2008 08:25 AM

  • Every time I try to uninstall firefox a window pops up and says that a previous upgrade was unsuccessful and I need to reboot. I have rebooted several times, I

    every time I try to uninstall firefox a window pops up and says that a previous upgrade was unsuccessful and I need to reboot. I have rebooted several times, I have downloaded a "fresh version" and installed it. It won't uninstall. Someone please help!!

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
    ''(If you're using an added theme, switch to the Default theme.)''
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
    [[Image:FirefoxSafeMode|width=520]]<br><br>
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.
    Thank you.

  • Need to reboot WRT54G2 every morning

    Need to reboot WRT54G2 every morning but only for my wireless printer. Everything else works great. Print job sits in spooler until router is reset then it will go through

    I think it must be the issue with the printer settings on the computer.
    Go to Printer properties. Click on Advanced tab. You will find the option print directly to the printer. Select that option and see if that works.

  • Anyone having Bluetooth syncing issues w VW Tiquan11... and iPhone4? Essentially the pairing craps out every other time when you connect to the cars bluetooth. Requires rebooting iPhone, power off/on and then connects..

    Anyone having Bluetooth syncing issues w VW Tiquan11... and iPhone4? Essentially the pairing craps out every other time when you connect to the cars bluetooth. Requires rebooting iPhone, power off/on and then connects..

    Many people are finding their Iphone 4S drops connection with their VW (Passat etc) integrated bluetooth hands free system after working fine for 5, 10, 20 minutes. The only way to reconnect is to switch the car off or turn the Iphone bluetooth off & back on.
    This is a dangerous fault and it appears that both Apple & VW have no solution (or are ignoring as they have already sold you a phone & a car).
    iPhone 4S, iOS 5.1.1, VW bluetooth

  • Ea3500 linksys smart wifi reboots every 5 secs

    can not connect my ea3500 (v1.1.39....) with linksys smart wifi from iphone 5s iOS 7.1.2 it reboots every 2-5 secs endlessly
    also can not connect it from the web via latest firefox and IE after input in my login and password the circle spins endlessly
    reboot doesnt help, only restore
    tired of restoring it
    does anyone have this problem? maybe new sw is needed?

    Ok so the router is ok but the app on your iphone reboots? Have you done a full power off on your phone lately? If that doesnt work try a reboot on your iphone. 
    Begin by holding the sleep/wake button at the top right of the device and the Home button at the bottom center of the face at the same time.
    Hold them both until you see the screen go black. In some cases, you may need to keep holding them even after the red power-off slider appears. If it appears, just keep holding it
    Wait until the silver Apple logo appears.
    When this happens, you can let go - the iPhone is rebooting

  • TS1363 my iphone is locked and i need to delete every thing on it, and reinstall

    my iphone is locked and i need to delete every thing on it, and reinstall. how do i do it?

    You can restore the phone.
    Turn the phone off.
    Once the phone is off, hold the home button and don't let go.
    Press the power button while still holding the home button.
    You should see 'Connect to Itunes' on the screen.
    Connect to iTunes to Restore the phone

  • SRW2024 rebooting every 50 days

    HELLO WORLD
    We have two SRW2024 which has a strange behavior. both of them rebooting exactly every 50 days.we face everytime a short outage of the network traffic.
    Model Name   SRW2024 
    Hardware Version   00.03.00 
    Boot Version   1.0.1 
    Firmware Version   1.2.2
    Is this a known issue? In the support section I found a firmware 1.2.2b. I cant find any release notes and I'm asking myself, if this FW version would solve this automated reboot?

    Hello Ivor
    thank your asking back.
    I'll post the case number tomorrow. in the meantime I'd like to answer your questions :
    Issue 1 - reboot every 50 days issue
    - Based on the information that was provided it appears that you have a syslog server. Does the syslog server log every 50 days a startup syslog message (for example: %INIT-I-Startup: Cold Startup)?
    >>> After I figured out the issues for the first time I configured the Switch for sending the mesages to our log server. yesterday was day 25 as I posted my last message. the Issue 2 happens and I need to wait now another 50 days.
    - How is the system uptime measured (which tool, how does the tool measure it)?
    >>> the system uptime is measured with cacti.net monitoring by using the SNMP read community OID .1.3.6.1.2.1.1.3.0
    - Configuration of the device
    >>> the switch has no special configuration. just used as a plain (unmanaged) switch within a LAN. the switch is used in a audio streaming environment. we produce corporate webradio streams for our customer. therefore the switch is used 24/7 with a average load of 20 Mbit/s output on port g1 to the Firewall >>> WAN Switch >>> ISP Backbone
    - The content of the memory & flash logs
    >>>> I currently won't login again, because I fear of another reboot. the switch is in productive environment and another forced cold startup will cause streaming interrupts for our customers ! I try to access with a IE6 standalone installation from Multiple IE (http://tredosoft.com/Multiple_IE) and keep you posted on that
    - Is there some kind of automatic process in the network that occurs every 50 days?
    >>> no automatic processes within the LAN
    Issue 2 - fatal error
    - Which build of IE 8 is used?
    >>> the latest after updating from IE7 to IE8 (MS update function) : Version 8.0.6001.18702
    - Are there any plugins in IE 8?
    >>> just two plugins automaticly installed from Java are installed see below :
    Name:                   Java(tm) Plug-In 2 SSV Helper
    Publisher:              (Not verified) Sun Microsystems, Inc.
    Type:                   Browser Helper Object
    Version:                6.0.130.3
    File date:             
    Date last accessed:     Montag, 17. August 2009, 22:53
    Class ID:               {DBC80044-A445-435B-BC74-9C25C1C588A9}
    Use count:              27
    Block count:            0
    File:                   jp2ssv.dll
    Folder:                 C:\Program Files\Java\jre6\bin
    Name:                   JQSIEStartDetectorImpl Class
    Publisher:              (Not verified) Sun Microsystems, Inc.
    Type:                   Browser Helper Object
    Version:                6.0.130.3
    File date:             
    Date last accessed:     Montag, 17. August 2009, 22:53
    Class ID:               {E7E6F031-17CE-4C07-BC86-EABFE594F69C}
    Use count:              27
    Block count:            0
    File:                   jqs_plugin.dll
    Folder:                 C:\Program Files\Java\jre6\lib\deploy\jqs\ie
    - Was there any change in IE 8 from default configuration?
    >>> No
    - Does it always happen when logging in, or did it happen just once?
    >>> It happens just once. before sometimes I was not able to see something in the browser. the web management site stayed in blue. the same behavior as already reported here in the forum.
    - Did it happen immediately when logging in, or did it happen after navigating to a certain page / between pages?
    >>> I loged in and navigated to the System log site.
    My boss wants to replace the both switch by HP ProCurve switches if this happens frequently. So I cant promise that we keep this switches for another 50 days. I'll open a case number anyway and keep you informed
    Regards
    tom

  • Can't Launch "Memo" Application ... Soft Reboots Every Time I Try

    Help. All of a sudden, my device no longer allows me to launch the Memo application. When I tap to launch the app my device soft reboots every time. I have a ton of critical information in my memos that I need to access every day (fortunately, all the info is backed up on my desktop - it syncs to MS Outlook). Anybody know how I can fix this? I've seen this behavior with other applications on my TX, but this is the first time I have seen it on one of the core applications. Thanks for any help.
    Post relates to: Palm TX

    Sounds like a corrupted Memo application that could be causing the reboot.
    Go to www.pimlicosoftware.com and download a trial of dbfixit scan your device and see if it finds any errors.

  • WRT54G reboots every 20 minutes

    I recently just switched from astound to comcast and astound worked fine 100% uptime no d/cs or anything...When we switched to comcast the router reboots every 20 minutes. I called comcast and they said everything is fine on their end. I tried power cycling everything and still no luck. When i connect directly to the modem I get no d/cs. Anyone have any ideas? Thanks in advance for any possible help, and sorry for my prolly horrible grammar. =]
    Message Edited by Hukepi on 08-08-2007 10:31 PM

    hi... connect the computer directly to the modem, go to www.linksys.com/download and download the latest firmware for the router, connect modem >> router >> pc, logon to router's setup page, open I.E. and in the address bar type 192.168.1.1 it would ask for username and password...put "admin" (default password) as a password and try reflashing/upgrading firmware on the router, after reflashing firmware on the router reset it and reconfigure it according to ISP settings and try reducing MTU to 1365 on the router...check whether it makes any difference or not and let me know the results.

Maybe you are looking for

  • How can reset/delet domain passwaord cache in local machine

    Dear concerns, I am using a windows 8 operating system, I am member of a domain. Also I am a local administrator of my laptop. I also have made image of my system drive. Yesterday my windows got stuck and its giving errors regarding  startup applicat

  • How Can I do it with to different ipod on the same computer ?

    I have and ipod(1GB) and my daughter has another ipod(4GB), how can we work with the same computer and itune for 2 different ipods ? iPod(1GB) and a second iPod(4GB)   Windows XP   2 different iPods on the same computer

  • What Oracle Table contains Partition Key Field Name?

    What Oracle table/view maintains the partition key field name? All_Tab_Partitions does not appear to maintain such information. When I use Toad -> Schema -> Tables -> Partitions, it lists the partition key field name that the partition is based. Than

  • What do i do if my iPod is not coming on

    Hello, I have had my iPod touch for about a year now and last night I locked it and it has not come on since then. I would like to know what I can do I have a blue iPod touch 5th generation 32 GB running iOS 8.0.2.

  • How to mark (psd) Images with the Circle Symbol without duplicating them

    I would like to import my layered images in Aperture. The problem is i would like to further adjust them in photoshop cs3 without creating a duplicate. Is there a possibility to mark this images with the Circle Symbol (for edited with external editor