Need to receive via Multiple Partners

We are trading X12 850 documents through an FTP listening channel. In our files there are multiple receiver ID's (ISA08) that we need to seperate in B2B. Currently all documents regardless of ID is being recognized as the Host partner.
In this case the Host is acting as a Distributor of the documents so they are being forwarded to seperate processes.

Thanks for the link regarding the Hub. We were able to set that up with no issues. To confirm we must always have the two occurences in the DB for the same transaction ? If so how can we correlate them ?

Similar Messages

Sending EDI To Multiple Partners Using Single Send Port in Orchestration

Hi Guys,
I am having a scenario where i am receiving a Xml(which can be in between 11-15). I am having 150 Trading Partners with whom these datsets have to be shared. Now every Trading partner is having there own character Sets and unique numbers so i have created 150
party agreements for all the Trading partners. I am interested to use a single port. I have created an orchestration to achieve this. Below are the steps i used to create orchestration :-
1) Receiving 11 XML from receive shape.
2) Extracting the value of Node TSP(this value is used to know the trading partners unique number on which i am deciding to which party agreement this Xml needs to go) using xpath.
3) I am constructing the message in construct.
3.1) Mapping from XML To EDI.
3.2) As all 11 datasets are having different version. So i am overidding the value ISA and GS in Message Assignment(SourceName).
4) Decide shape to decide on the value of TSP to which port it has to be send.
But according to me this is not an optimized solution. Below are reasons:-
1) I have to create 150 branch into decide shape. As i am receiving 11 different Xml messages i need to create decide shape for all the different Xml messages.
2) I have to create 150 different ports which are having 15 operation(depanding upon Xml we received).
Note:- I have to create 150 different Send Ports only because of Party Agreement. So is there any solution? i only want Single Send port and i can select the party Agreement in the orchestrations.

Duplicate thread. See:
http://social.msdn.microsoft.com/Forums/en-US/c12a377e-ccf6-4fbe-9986-14da63d72282/sending-edi-to-multiple-partners-using-single-send-port-in-orchestration?forum=biztalkgeneral

Is there a way to open a zip file received via email on the iPad? I tried and a message popped up saying mail cannot open the attachment.

Is there a way to open a zip file received via email on the iPad? I tried and a message popped up saying mail cannot open the attachment.

You need a third party app. Take a look at some of these on this Google page.
Open zip files on iPad

Can I use an external GPS Receiver via Bluetooth?

Great phone. I used a Galaxy Nexus for over a year until I got this phone, but once I started using the Z10, I never looked back. The "Hub" is a GREAT feature, exactly what I use most of the time. Oddly enough, I was never much of a BB fan until the Z10.
Anyhow, I have bought several apps and accessories for the Z10. I rely on my Z10 a lot.
I still have (from my old Windows Mobile 6 phone days back several years ago) a perfectly working external GPS receiver that has Bluetooth (Holux GPSlim236). Great little receiver.
Since I often use my Z10 for GPS nagigation (I am using Mireo DON"T PANIC) for directions whilst riding my motorcycle all day long, with Bluetooth enabled to my helmet, having the GPS radio on as well as Mobile (aka phone) and Bluetooth does drain the battery faster than if I could avoid using the internal GPS at this time (I still want to use the internal GPS at other times). I do have a data plan, so I could use the internal maps, however, I often ride through places with no data access (back country).
I was able to pair the Bluetooth GPS Receiver to the Z10 (easy enough), however, there is no option in the "Network Connections" settings area to be able to disable the internal GPS radio, or anywhere else, so I can't tell for sure that this is working (that is, not using internal GPS but using external GPS). I suspect it is not using the external GPS Receiver, though, since Bluetooth settings indicate "no services" for the external Bluetooth device.
Is there a way to sometimes use the external Bluetooth Receiver on the Z10 (in order to save battery on long trips)?
It is also not just for battery power savings, but also when I ride there is no air conditioning, so the phone does get hot, and I suspect would be cooler if I used an external GPS receiver via already-enabled-anyways Bluetooth.
Thanks

I am not sure my original message was clear.
I have th Z10, it has GPS software and a built-in GPS radio receiver. I also have an external GPS radio receiver, not a GPS device. It is strictly a radio receiver. I used to use it years ago on my Windows Mobile device - the software with maps was on Windows Mobile, and the GPS receiver hooked up via Bluetooth.
The GPS receiver in the Z10 uses the Z10 battery. I have the Bluetooth on anyhow to connect to my helmet headset. Since Bluetooth is on already, I could save Z10 battery by using the external GPS radio receiver (disable the internal GPS radio receiver), thought the map software would still run on the Z10.
So, the previous response says "does have GPS profile" but also says "external GPS will not work:".
I am not sure the statement was respect to my setup.
What I really need is for the Z10 Bluetooth to see the external GPS receiver, perhaps as a serial device or as a GPS device, howsoever such things work, and for the GPS map software to use the external rather than try to use the internal (the map software should not really care, it should be the OS that virtualises the GPS port).

Problem in J1IFQ -Reconciling the Qty -Received in Multiple Batches- reg

Dear Sir/ Madam,
We are encountering the Problem During Reconcilation of Quantity in Subcontracting cycle Received in Multiple Batches.
The Following steps are followed,
1. We have created a Subcontract PO with BOM Explosion.
2. The Required Components are issued through MB1B.
3. Subcontract Challan Raised in J1IF01.
4. We created the Goods Receipt for the Processed MAterial Which has come in Two Batches.Hence we have used Distribute Quantity and split the Qty and Entered the Batch Numbers.Document Posted.
5. In Transation J1IFQ, We have entered Material Document Number and Challan Number and Executed.
6. Top of the Screen Material Document Details with Open Quantity are Displayed.There were two Line items displayed with Movement type 101.Since it is Received in Two Batches.The Consumed Quantities were shown in Movement type 543.
7. Bottom of the Screen the Challan details were displayed with Challan Quantity.
8.The Open Input quantities are assigned cumulatively against DC Quantity for both the Batches.
9. When we check the Allocation it gives an Message saying that"Material XXXXXXXXXX is not assigned fully, short by XX.XXX KG".
Note: We are not facing any problem If the Goods Receipt is made for the Single Batch.
Kindly Give us Your Valuable Input In order to Solve the Problem.
Regards,
M.Murugesan

Hi,
You don't need to create 10 process orders to split for 10 batches, In one process order itself you can do batch splitting in CO11N (auto GR) or MB31.
Pl check the below link
Process order with multiple batches of finished product
thanks,
JK

Mail is no longer deleted on ISP's server once received via mac mail- why is this happening?

Why is mail no longer deleted on ISP's server once received via mac mail?
The box to delete message from ISP's server once it is downloaded is ticked in Mac Mail account's prefrences and this option in the past did delete it from the ISP's server. It no longer does this, it only moved the copy from the ISP's in box to the trash so now the recived message has to be manually removed from the ISP's trash.
Does Apple need to supply a patch to put this right?

Hi Log into your account via Webmail in a browser & see if you have a setting like this...

Airplay does not recognise my Pioneer vsx-1122-k on my iPad, I can control my receiver via the pioneer app on my iPad so it is just airplay not a connetivity issue. My Panasonic Stereo is recognised on Airplay.

Since upgrading to the latest IOS, Airplay does not recognise my Pioneer vsx-1122-k on my iPad, I can control my receiver via the pioneer app on my iPad so it is just airplay not a connectivity issue. My Panasonic Stereo is recognised on Airplay.

Hi
I don't know if you're still having this issue but there is a way round it as I'm having the same troubles.
I've just spoken to Apple about it and found out:
– If you have a Mac made before Mid-2011, it doesn't have a piece of hardware needed to take advantage of the 'Airplay mirroring'
– So you can update to a later version 10.6.8+ but this won't help at all
The way round it:
– Download 'Airfoil' and install this
– You can then play music from any defined source (Spotify, Quicktime etc) through your Airplay connected speakers
So sadly, for those have a Mac from before Mid-2011 there's isn't an option that's as easy as Option-click on the sound icon to switch to Airplay speakers.
Hope that helps, I can now get on with the rest of my day now after sorting this out.
Adam

Apple TV to Receiver via OPTICAL AUDIO

I am trying to hook up apple TV. I reand the HDMI to a splitter and I have picture. I need to run audio to my Onkyo txsr501 receiver via the optical cable. I have tried 2 different cables and can not get audio.
any suggestions,
is there something in settings to use optical audio?

You would use optical when connecting to a DVI device for video or when not using the HDMI port at all. The latter is how I've always used my ATV, as an audio-only Airplay bridge that allows my bedroom stereo to stream from my iPod Touch and iTunes on my PC.
Interesting tidbit: It is possible to output audio over DVI, such that a DVI(device)->HDMI(TV, receiver, etc) cable or a plain HDMI cable attached to the device with a DVI/HDMI adapter carries audio, and the target HDMI device won't know the difference between this DVI->HDMI connection and a normal HDMI->HDMI connection. Many PC video cards can do this. This is possible because it's a straight-through connection using exactly the same wires. Most devices won't transmit or receive audio over DVI, and that's why DVI is mainly known as the video-only connection that is compatible with HDMI.

How do I remove my phone number from iMessage so that I could only send/receive via email?

I Need to do this because my postpaid line has recently been disconnected and after updating to IOS8, I couldn't activate iMessage anymore. I know that everytime we active iMessage and Facetime the carrier sends an international text to Apple for activation; so I'd like to temporarily delete my mobile number (since it won't activate yet) and only send / receive via email - so I can still use iMessage.
I Couldn't tick on the number because its greyed out.
Hope someone can help me. Thanks.

This article explains what to do:
http://support.apple.com/kb/HT5661

What is the absolute client permission needed to receive Unix commands?

The ARD error "This task is not authorized on (computerName)" is forcing me to allow almost all the privileges in the Remote Management section of client computer's Sharing System Preferences. I've already had to add:
"open and quit applications"
"change settings"
"delete and replace items"
"restart and shutdown" (see this Apple document's suggestion for Unix commands)
"copy items"
It makes no sense to my why 'Generate reports' must also be added, but clicking it off makes the error return. I'm just triggering a Unix command that goes something like "echo 1" and runs as root on the one test computer (and potentially dozens, so it wouldn't be pretty changing settings in that many) If it helps, the ARD host is 10.6.7 with ARD 3.4 (installed via the App Store a couple weeks ago) and the clients are 10.4.11 and 10.5.8.
I'm preparing documentation for ARD and some clients installing our software will not warm to the idea of widening up the permissions footprint. Potentially dozens of computers will need to be retweaked, even if they wouldn't have to leave their seat.
We also will need to deploy a pkg installer, so some of those may need to remain checked, but ...
What is the absolute client permission needed to receive Unix commands?
Thanks

Have you tried sending it as User: Root
To my knowledge with that setting you do not need any client permissions as a unix command used as Root overides any permission set. If this is something you need to do often I do know for a fact you can make the report task up use send as Root and tell it to save as template. After this you will be able use the templte to make things a bet quicker. I believe in oder to do this you must enable root user open Directory Utility in order to do this. Keep in mind root has full permissions and any command you enter with unix will be executed as such. This is a word around in the way that the normal client users do not need to have permissions enabled, also having root available at times is handy in stick situations.

I have three different e-mail addresses, and need to receive the incoming e-mails from the three sources. How do I enable my iPhone to do it? Tks in advance.

I have three different e-mail addresses, and need to receive the incoming e-mails from the three sources into my iPhone (it's presently receiving msgs from only one of them). How do I enable my iPhone to do it? Tks in advance.

Many thanks for your help!

Multiple Partners for the same customer in Message tracking of SEEBURGER

Hi,
This is for third party customers which use EDI messages. We have for one customer multiple partner numbers configured in Partner profile. I would like to know while configuring the trading partners in SEEBURGER Message Tracking, can we have multiple keys for the same customer for multiple partners for an INVOIC02. Like the following keys:
12345_INVOIC02
34567_INVOIC02
45678_INVOIC02

Hi Satya,
you can define for a vendor/customer several partner functions with different
adresses. You can create certain partner roles several times.
If you create a purchase order, than you can choose the wanted
address and partnerrole on the header level. In the standard system you
can use the patner role 'OA' ordering address and for the finance
the 'IP' Invoice presented by.
I hope I was able to help you.
Kind regards,
Zsuzsanna

Need help in creating multiple signature forms?

need help in creating multiple signature forms that can be digitally signed in adobe reader

Automator gets a bit unweildy when trying to vary things outside of what the actions provide. Since you are already using an AppeScript in your workflow, might as well do the whole thing:
set baseFolder to (path to desktop) -- the location to create the folder
display dialog "Please provide a new folder name:" default answer "test"
set folderName to text returned of the result
repeat -- keep repeating until a number is returned
display dialog "How many subfolders?" default answer "5"
set theNumber to text returned of the result
    try -- test the result
      set theNumber to theNumber as integer
      exit repeat -- success
    end try
end repeat
tell application "Finder"
try -- make new folder
    set newFolder to (make new folder at baseFolder with properties {name:folderName})
on error number -48 -- skip errors if the folder is already there
    set newFolder to ((baseFolder as text) & folderName) as alias
end try
repeat with X from 1 to theNumber
    try -- make new subfolder
      make new folder at newFolder with properties {name:folderName & X}
    on error number -48 -- skip errors if the folder is already there
    end try
end repeat
end tell

I just purchased a license for LR 5 (received via reseller, DVD in Box) and wanted to use the serial on the downloaded LR5 version through Creative Cloud. System sais "The serial number you entered is invalid. Please try again. If problem persists contac

I just purchased a license for LR 5 (received via reseller, DVD in Box) and wanted to use the serial on the downloaded LR5 version through Creative Cloud.
System sais "The serial number you entered is invalid. Please try again. If problem persists contact Customer support".
I have tried several times, without success. Internet connection is working.
Thanks for your help.

If you have a DVD version then you have to use the serial number that is associated with the DVD version. A Cloud subscription number has no relationship to a DVD serial number.

'12 Mini to Older Receiver via Optical - Can't get 5.1 Surround

Yet another "Can't get surround sound via Toslink" question...
System:
2012 Mac Mini
Video to Sharp HDTV via HDMI
Audio to Pioneer VX-D608 Receiver via Optical
I have the cables connected properly. Video is flawless. Audio is being transmitted to the receiver, which "sees" an AC-3 or DTS signal and automatically switches into those modes according to the format encoded with the files. But for some reason, I am only getting sound out of the front speakers.
I have tested the receiver and all (5.1) speakers are functional.
It is as if I am only sending the front right and front left signals via AC-3 or DTS.
I have spent about 40 hrs playing with various audio software arrangements, including Plex, VLC, Perian (AC-3/DTS passthrough), Soundflower and Soundflowerbed routing.
Currently, in Audio MIDI Setup I am using the "Built-In Output", set to Encoded Digital Audio. The Format appears to switch depending on the file I am playing. The speakers can only be configured to Stereo, none of the surround options present themselves, which I understand is OK because the AC-3 or DTS is passed to the receiver via an encoded stereo signal.
My VLC player is playing an AC-3 or DTS track, and the output is set to the Built-In Output (Encoded).
As I mentioned, the receiver "sees" DTS or AC-3, but the sound won't come out all 5.1 speakers even though I know they are functioning.
Any help is appreciated.
Thanks!!

If the receiver is seeing an AC-3 or DTS signal, it indicates
that the software is passing through the encoded audio.
These streams cannot be altered or manipulated, especially DTS
which is a very tightly licensed codec, by the software or the Mini.
So, if the receiver is seeing the digital audio as AC-3 or DTS, the problem is
not with the Mini.

Need to receive via Multiple Partners

Similar Messages

Maybe you are looking for