Need to reconfigure UCM

Hi, If anyone knows what values needs to be inputed in config.cfg for reconfiguring UCM.
"Is New Content Server Instance". It don't know the exact variable to set. Any help appreciated.

My crystal ball (we shouldn't need that to understand question) tells me that you want to change jdbc parameters after initial configuration was performed. The easiest way to achieve this is:
Log to the WebLogic Administration Console (http://servername:7001/console/)
Go to Services -> Data Sources -> CSDS -> Connection Pool -> you are at the right place.
Regards,
Boris

Similar Messages

Do i need to reconfigure OEM Database Control when change ip address?

Hi all.
Do i need to reconfigure OEM Database Control after a change of ip address?
I mean, i have an OEL5 box with 10g Rel2. I have configure the server with a static ip address.
This server will be sent to another location and it's possible the ip address will be changed. It will remain a static ip, but may change. Since i plan to deliver this server with rman jobs within OEM Database Control. I'd like to know if this will continue working after an eventual ip address change ....
Regards....!

myluism wrote:
Hi all.
Do i need to reconfigure OEM Database Control after a change of ip address?
I mean, i have an OEL5 box with 10g Rel2. I have configure the server with a static ip address.
This server will be sent to another location and it's possible the ip address will be changed. It will remain a static ip, but may change. Since i plan to deliver this server with rman jobs within OEM Database Control. I'd like to know if this will continue working after an eventual ip address change ....
Regards....!It depends.
When you created the dbcontrol, the configuration was put in a directory in ORACLE_HOME named something like 'hostname_sid' and there are also files under that where the hostname is baked into either the file name or a property of a configration defined within a file. If it is truly hostname, you might be ok, but if it is actually IP address instead of host name (I have seen that) then you obviously have a problem.
Over the years (and across several versions) I've found the OEM repository to be rather "brittle", and Oracle to have a rather cavalier attitude about rebuilding it. As a result, I specifically DO NOT have anything important - and very specifically my backup jobs - in the repository. I still schedule my backups through rman, though I know many people use dbms_scheduler. But even that appears to not be the same as an oem controlled schedule.

Do i need to reconfigure my cRIO after updating into 8.5

Hi all,
I used to run my program with 8.2 LabView software . Now i m updating into 8.5 version .
Do i need to change anything or reconfigure my cRIO controller ?
Thank you
Best regards ,
roxy

Hi Roxylat,
For just a LabView upgrade, you do not need to reconfigure your cRIO. However, for future information, you do need to reconfigure the cRIO in any of the following circumstances:
1. You change the versions of either NI-RIO, NI-VISA or Real Time.
2. The NI-RIO versions on your controller and your PC are not the same.
Hope this helps.
Ipshita C.
National Instruments
Applications Engineer

The access to our new chess hall may be blocked by your local firewall. You would need to reconfigure your firewall to open port 15010 for TCP traffic.

How do I do the following so I can get into my chess program??
The access to our new chess hall may be blocked by your
local firewall. You would need to reconfigure your firewall to open port 15010
for TCP traffic.

This is not really Firefox related.
What you need to do here is to read the firewall manual which usually explains how to create a rule for what you want to do.
If you're using the Windows XP firewall, see this Microsoft article: http://windows.microsoft.com/en-US/windows-vista/Firewall-frequently-asked-questions

I just bought a new Motorola modem. Do I need to reconfigure my Airport Express? For some reason we have WiFi even though the amber light is blinking.

I just bought a new Motorola modem. Do I need to reconfigure my Airport Express? For some reason we have WiFi even though the amber light is blinking.

Typically, when changing out networking hardware, it is always a good idea to perform a complete power reset of all of your networking equipment.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

Need to Reconfigure DNS Setting on My AirPort

Comcast is making changes that require a reconfiguration of the DNS setting on my AirPort (Extreme). Without the reconfiguration, I am unable to connect to the internet. How do I change the DNS setting to "Dynamic DNS" so that any settings can be made automatically by Comcast? I'm clueless.
Any help is appreciated. Thanks.

If you're referring to Microsoft Remote Desktop Connection then you need to post your question on a Microsoft forum as this forum is for troubleshooting Apple Remote Desktop...apples software for managing Mac on your network.
Please clarify which software you're referring to.

Do I need to reconfigure my Time Capsule when I get a new modem?

I have recently upgraded to AT&T Uverse internet; since then I have had experienced frequent slow speeds from my Time Capsule router. I have disconnected the router built into the AT&T modem, and AT&T has come out several times to ensure that the issue is not with the phone line nor the modem itself--when we connect the modem to the computer via and Ethernet cable, everthing works fine.
My question is, is there some sort of reconfiguration process I need to go through to make the Time Capsule router work faster with the AT&T Uverse modem?

No problem.
You can factory reset from the airport utility. Just select the TC in the airport utility.. it must be highlighted to work.. go to the top menu area and use Restore Default Settings.
Or do it manually.. I prefer this method.
The Factory Reset TC Gen1-4. Or AE Gen1-5
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec.
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Factory reset TC Gen 5 or AE Gen 6
Hold in reset for about 5sec until the status light flashes quickly.
If your AirPort AE or TC still doesn’t respond, do a similar reset to the Gen1-4.
Unplug your AE/TC .. hold in reset and power the TC/AE back on.. without releasing the reset.. wait until status led flashes rapidly.

Do I need to reconfigure airport extreme with a new modem?

I looking into buying a new modem (Motorola SB6120) to take advantage of Comcast's DOCSIS 3.0 speeds. Just wondering if I will have to reconfigure my airport extreme?

You shouldn't have to reconfigure the AirPort Extreme, but it is always a good idea to perform a complete power recycle of your networking equipment when replacing any one of them.
Power-down the modem, AirPort base station, and computer(s).
(OPTIONAL) While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Power-up the modem; wait at least 10-15 minutes.
Power-up the base station; wait at least 5-10 minutes.
Power-up your computer(s).
In this basic configuration, computers connected to the base station, either by wire or wireless (as appropriate for the base station type), should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options.

Why do i need to reconfigure a network each time i boot up ? (G5, airport)

I am using a G5 with a built in airport extreme card and a mini antenna. Each time I boot up I have to reconfigure a network. I could not locate any info from Apple regarding this problem. Any one know how to solve this problem?
Thanks in advance.
Richard
G5 Mac OS X (10.4.3)

It sounds as if you have an ad-hoc network, that is a computer-to-computer network without a base station. A by product of ad-hoc networking is that you have to re-establish the network each time the computer that establishes the network is booted. This disadvantage is overcome by having a dedicated router in your network.

Need to reconfigure the VM after vm deployment

Hi All,
I am having a script to deploy a VM from an CSV file . I need to change the vm ( CPU & Memory) configuration after vm deployment. where the name of the vm should be taken from csv.So any help is much appreciated.
Attaching the script used . ( downloaded and works fine)
$vms = Import-CSV D:\vm-deploy\vm-deploy.csv
foreach ($vm in $vms){
      $Template = Get-Template $vm.template
      $VMHost = Get-VMHost $vm.host
      $Datastore = Get-Datastore $vm.datastore
      $OSCustomization = Get-OSCustomizationSpec $vm.customization
      New-VM -Name $vm.name -OSCustomizationSpec $OSCustomization -Template $Template -VMHost $VMHost -Datastore $Datastore -RunAsync
## This cmd need to execute after the vm deployment completed. The VM name should come from the 1 colum of CSV file
Set-VM $vmname -NumCpu 2 -MemoryGB 5 -Confirm:$false
Write-Host "All vms deployed, " -ForegroundColor Green
Disconnect-VIServer -Confirm:$false
CSV file looks like this
Name,Template,host,datastore,customization
Test-VM,vm-dep-test,ESX02,P5-vm-stage,vm-deploy
Thanks in advance.....

A simpler, but not optimal, solution is to use the Wait-Task cmdlet.
Something like this
$vms = Import-CSV D:\vm-deploy\vm-deploy.csv
$tasks = @()
foreach ($vm in $vms){
      $Template = Get-Template $vm.template
      $VMHost = Get-VMHost $vm.host
      $Datastore = Get-Datastore $vm.datastore
      $OSCustomization = Get-OSCustomizationSpec $vm.customization
      $tasks += New-VM -Name $vm.name -OSCustomizationSpec $OSCustomization -Template $Template -VMHost $VMHost `
          -Datastore $Datastore -RunAsync
Wait-Task -Task $tasks
foreach($vm in $vms){
Set-VM $vm.name -NumCpu 2 -MemoryGB 5 -Confirm:$false

I need to reconfigure my E4200...Help!

I have been set out to pasture by the Linksys support staff as I have passed my 90 free tech asstistance period. Now I guess they think I am a cash cow....sorry this cow is unemployed
I had a power outage and now I have a solid Cisco light on the top of the router but I can not get any port light activity on the router. I don't see how I can reconfigure it if the system can not even access it? I feel like a moron right now.....please help me..

Tinytech wrote:
If I could communicate with the router I could upgrade the firmware or reconfigure....but as I stated the cables I am using all checkout fine....I can connect directly to the cable modem to my computer and access the internet with NO issues. The Router will not reset......No port lights.....can not bring up http://198.168.1.1 or http://198.168.2.1 to access the unit.
Ladys and Gentleman I believe we may have a BRICK!
How about checking the power adapter? Make sure it is the correct power adapter. It should have 12V 2A output. If it is correct and same thing is happening, then I can say that the router is defective.

Need Help | Oracle UCM 11g | Creation of new layout

Hi All,
This is regarding the problem we are facing to create a new layout and skin. We followed all the steps that were needed to create a new layout/skin but still we are getting errors after deploying the component. Since there were major changes in 11g, we are not able to proceed with debugging as well. (part of the reason being code clean-up is not done properly and we are going to wrong files while debugging.)
Having said, I need your help/advice in solving my problem. Below are the problems I am facing once I deploy the component.
1) Even though I am mentioning that skin.css and layout.js should be published from “publish/resources…” folder, different skin.css and layout.css files were getting deployed. Not sure from where the content server is picking those files from. I am placing the skin.css and layout.css from TopMenus/Trays to continue my testing.
<tr>
<td>publish/resources/layouts/NBNTrays/layout.js</td>
<td>resources/layouts/NBNTrays/layout.js</td>
<td>TRAYS_LAYOUT_JS</td>
<td>javascript:layout:NBNTrays</td>
<td>60</td>
<td><$if isLayoutEnabled("NBNTrays") and (not DisableNBNTraysPublishing)$><$doPublish = 1$><$endif$></td>
</tr>
2) After the component gets deployed and we publish all static files, I am able to change the layout/skin to my custom layout/skin. Top menus is working fine, but in Trays layout I am not able to see the left navigation.
3) Though I am saying to copy all the images from resources/trays folder, component is copying only some subset of images from the corresponding folders.
<tr>
<td>resources/layouts/Top Menus/Oracle</td>
<td>resources/layouts/NBNTopMenus/NBNSkin</td>
<td>resources:layout:NBNTopMenus</td>
<td>70</td>
<td><$if isLayoutEnabled("NBNTopMenus") and (not DisableNBNSkinSkinPublishing) and (not DisableNBNTopMenusPublishing)$><$doPublish = 1$><$endif$></td>
<td>1</td>
</tr>
Can you please tell me how can we associate new layout.js and skin.css to the new layout/skin.
Please note that all the above problems were coming in 11g.
Thanks in advance,
Regards:
Veera

Hi All,
This is regarding the problem we are facing to create a new layout and skin. We followed all the steps that were needed to create a new layout/skin but still we are getting errors after deploying the component. Since there were major changes in 11g, we are not able to proceed with debugging as well. (part of the reason being code clean-up is not done properly and we are going to wrong files while debugging.)
Having said, I need your help/advice in solving my problem. Below are the problems I am facing once I deploy the component.
1) Even though I am mentioning that skin.css and layout.js should be published from “publish/resources…” folder, different skin.css and layout.css files were getting deployed. Not sure from where the content server is picking those files from. I am placing the skin.css and layout.css from TopMenus/Trays to continue my testing.
<tr>
<td>publish/resources/layouts/NBNTrays/layout.js</td>
<td>resources/layouts/NBNTrays/layout.js</td>
<td>TRAYS_LAYOUT_JS</td>
<td>javascript:layout:NBNTrays</td>
<td>60</td>
<td><$if isLayoutEnabled("NBNTrays") and (not DisableNBNTraysPublishing)$><$doPublish = 1$><$endif$></td>
</tr>
2) After the component gets deployed and we publish all static files, I am able to change the layout/skin to my custom layout/skin. Top menus is working fine, but in Trays layout I am not able to see the left navigation.
3) Though I am saying to copy all the images from resources/trays folder, component is copying only some subset of images from the corresponding folders.
<tr>
<td>resources/layouts/Top Menus/Oracle</td>
<td>resources/layouts/NBNTopMenus/NBNSkin</td>
<td>resources:layout:NBNTopMenus</td>
<td>70</td>
<td><$if isLayoutEnabled("NBNTopMenus") and (not DisableNBNSkinSkinPublishing) and (not DisableNBNTopMenusPublishing)$><$doPublish = 1$><$endif$></td>
<td>1</td>
</tr>
Can you please tell me how can we associate new layout.js and skin.css to the new layout/skin.
Please note that all the above problems were coming in 11g.
Thanks in advance,
Regards:
Veera

Using Airplay with AppleTV to share my MacBook Pro desktop is very unstable since upgrading to Yosemite, are there any settings I need to reconfigure?

I used to use desktop sharing from my Macbook Pro (Late 2011, Intel Core i5) to watch videos on my TV. Since upgrading to Yosemite the stream has been unwatchable. Both visual and audio latency problems are very common. As streaming from my iOS devices is fine, I'm pretty sure it's not my WiFi setup. Has anyone had similar problems? Are there any settings I need to change to improve Airplay from Yosemite?
Thanks in advance.

Hey MasterAir,
If you are having an issue with AirPlay performance, I would suggest that you troubleshoot using the steps in this article -
Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L

AppleTV needs WIFI reconfigured too often

My AppleTV loses connection to my Airport Extreme base station (802.11n). Every couple of days I need to configure wireless again on the AppleTV.
The tv display shows that it still knows the Network Name and has an IP Address. However it does not know the Router address or the DNS address. As strong signal strength is displayed.
I don't broadcast the network name. It is a mixed config on the AEB (801.11n and 801.11g). I am using WPA password.
Generally I don't lose the connection overy night... but after two or more days of not using the AppleTV I will have to re-configure.
Any ideas on what is wrong?

Sure, provided you have an Apple Airport router. If you have some other brand you'll have to Google it
0) First, find out the MAC addresses for your iMac and AppleTV(s) (See separate procedures at end)
1) Open Airport Utility and double-click your router.
2) Click on the round 'Internet' icon.
3) Click on the DHCP tab.
4) You'll see a numeric DHCP beginning address of the form AAA.BBB.CCC.DDD where "AAA", etc are all numbers (on mine it is 10.0.1.2)
5) You'll also see a DHCP Ending Address like AAA.BBB.CCC.EEE (where EEE is a bigger number than DDD above (mine says 10.0.1.200)
6) Click on the [+] below the DHCP Reservations box.
7) Type in a meaningful description like "appleTV" or "iMac"
8) Make sure "Reserve address by MAC Address" is checked. (I don't know how to set it up the other way!)
9) Click Continue
10) Type in the MAC address of the device (it takes the form II:JJ:KK:LL:MM:NN)
11) Type in the final 1-3 digit(s) of the ipv4 address (the first digits, "AAA.BBB.CCC", should already be filled in for you. Just enter a unique number here.
12) Once you've entered a unique number, the Done key should un-grey automatically. Click it!
Repeat for the other device(es)
_To find the wireless or wired MAC address(es) of your iMac (depending on how it's connected):_
i) Click on the apple symbol in the top left hand corner of the screen.
ii) Click on "About This Mac"
iii) Click on "More info"
iv) In the left hand list, click on Network.
v) In the upper panel, click on either Airport, or Ethernet depending on how you connect.
vi) In the lower panel, look for "Ethernet:" and below it "MAC Address". It takes the form: XX:XX:XX:XX:XX:XX where 'X' can be any digit 0-9 or letter a-f. (Note that it reads "Ethernet" regardless of whether you're looking at wired or wireless. Seems odd, but there you go!)
_To find the wireless MAC address(es) of your AppleTV_
On the AppleTV: Settings --> General --> Network. It's labelled "Wireless ID"
You'll need to set up a separate ip address reservation for your iMac and each AppleTV (at least, that's what I did. I actually set up reservations for ALL my wireless devices now). If you mess up one, just highlight it in the listbox and click the '-' button (below the listbox) to delete it.
Good luck.

I need to reconfigure my network printer to a new ip address using the front control panel. how???

Please help! The printer is a color laserjet 3800. The ip address will not reset when I plug it into the wall drop.

Hi Dimon87,
The code interface node is very rarely used and therefore there isn't a lot of documentation about it. Since you already have your code written, I would really recommend compiling your code into a DLL and call it using the Call Library Function Node. For your reference I am attaching a few links that talk about using the Call Library Function Node.
http://zone.ni.com/reference/en-XX/help/371361D-01/glang/call_library_function/
http://zone.ni.com/reference/en-XX/help/371361D-01/lvexcodeconcepts/configuring_the_clf_node/
In addition please look in the example finder for an example called Call DLL.vi It gives a very extensive explanation about using this function.
Eli S.
National Instruments
Applications Engineer

Need to reconfigure UCM

Similar Messages

Maybe you are looking for