Need to record tonight-Please Help!
I use to record with audition 1.5 and am now trying and testing out the 3.0 version.
My lyrics are typed in Word and what I usually do is hit record then minimize Audition 1.5 and load up word and start doing my vocals.
Well in 3.0 when I try to open up word after hitting record, the recording just stops, it wont let me record with another window open.
Please help how do I record with another window open?
Also is the Graphic Equalizer effect called 'Destination:Car Stereo" not in 3.0? I dont see it anywhere.
Thank you very much!!!
>Well this option was not in CEP2.1 . Honestly what is the value and use to check 'Release ASIO Driver in Background'??
That's because there was NO ASIO in CEP2.1 as it used MME and WDM - completely different engines for processing sound information. ASIO is much stricter on the requirements of the system, but the positive side of the trade-off is that it can achieve, in general, much lower latenceies and greater stability.
You could loosely compare ASIO to the NT kernel vs WDM or MME as the Win98 kernel. Remember how much controversy there was over that when XP came out?
--Dean
Similar Messages
-
I just bought a new iPhone and accidentally backed it up with my old iPhone backup, I do not want this. I lost everything on my new phone and I need it back. PLEASE HELP! This includes pictures and texts, etc.
So just to be clear, when you say "just bought" how long ago was that? Is it on this new iPhone that you had pictures, texts, etc that you want? Were you backing up to iCloud or onto iTunes?
This may not help for everything but if you go to iCloud.com and log in, are you able to find your pictures there? -
Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help . regards Cindy
Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
Some basic printer troubleshooting steps before worrying about a printer driver:
1. Have you tried turning the printer off and back on?
2A. Is the printer attached with a cable?
If yes, have you tried unplugging and re-plugging both ends of the printer cable?
If that does not help, can you test the printer with another cable?
2B. If your printer is not connected to the computer with a cable, have you tried restarting your printer (assuming wireless connection)?
Have you tried restarting your wireless router?
3. Have you tried restarting your MacBook? (Be sure to save your work first.)
4. Does the printer have ink? (Doesn't usually generate a 'communications error' though)
5. Have you updated OS X or the program you're trying to print from recently? -
I have QuickTime Player 7.6.8, I cannot update or remove it b/c I am missing QuickTime.msi file. It is gone and I need it back. Please help.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.) -
My ipad and mini pad won't update though it says several apps are in need of updates. Please help!
Try updating from here:
App Store>Purchased
Note: You'll have to look out for apps that need update. -
ToolTip_Text not working in multi - record block - Please Help!!
Dear Friends & Gurus,
I'm using Forms Version 6.0.8.21.3 (due to many reasons) in C/S mode. Now I have a multi record block in which I am showing the Employee No. My customer's requirement is when I place the mouse on this Emp no., the emp. name must be displayed. I thought of achieving this by ToolTip_text. For this I'm having a Database function which returns the name (as I use this functionality in many forms), in the When-New-Item-Instance block level trigger I'm calling that function with passing the emp code as below
SET_ITEM_PROPERTY(:SYSTEM.CURSOR_ITEM, TOOLTIP_TEXT, FUNC_DIS_EMP_NAME(:SYSTEM.CURSOR_VALUE));But it is working only when I point the mouse in the first record. When I click on 3 or 4 record and then point to the first record, I'm getting the 3 record's name but in the first record.
Please help me - I searched through the forum and I find no accurate answer. It is urgent - please help.
Thank you.
With Kind Regards,
Perumal Senthil Alagu.Dear Safwan Bhai,
As salaamo alaikum Rahamatulla hi burakathu!!
Actually I'm having a multi record block in which all the emp no., days of attendance, etc will be displayed when I click on the search button. My requirement is when point the mouse over the emp no, the emp name must be displayed as a Tool tip text. My fields are non-editable, so Post-Change is not working. I placed the coding in the When-new-item-instance - in this case the emp name is displayed, but only for the first field, when I move the mouse to second and third fields, the empname of that particulart field is displayed as a tool tip but in the first field only.
Any other suggestions?
Anyway I would appreciate your help.
Thank you.
With Kind Regards,
Perumal Senthil Alagu. -
I have a macbook 13in mid 2010, im trying to update it from 10.6.4... i update it and restart i but when it finishes restarting, it says its still 10.6.4 and i need to update? please help!
Try downloaded the Mac OS X 10.6.8 Update Combo v1.1 standalone updater and installing it.
-
I installed both 10.1.4 and 11.0.08 updates this week and now I can't use the Digital "Sign" document feature. It's been completely removed. Need it back. Please help.. Can't sign or add text to any pdf document. Even when security properties allow it.
I would remove Reader and repair or reinstall Acrobat.
Having different major versions can cause some users issues. Reader is not necessary if one has Acrobat installed. Even though Adobe has improved the capability of having both Reader and Acrobat with the same major version level there are still user configurations that have problems with this setup. -
yesterday I have purchased Ipad2 with 3G but did not able see in built aceTime on my scree do we need to Install? please Help, yesterday I have purchased Ipad2 with 3G but did not able see in built FaceTime on my scree do we need to Install? please Help.
See this support doc on how to use FT... http://support.apple.com/kb/HT4319
-
just updated itunes now menu bar has dissapeared no black and white box at top left and ctr b does not bring anything up. i need file view etc please help driving me crazy
Is the iTunes window in FullScreen mode?
If so, press esc key. -
I lost my iphone4 i need to block it please help me i live in dubai
i lost my iphone i need to block it
please help meYou could do that, if you had "Find my iPhone" installed prior to the loss:
Locate your missing iPhone with Find My iPhone.
There is no other way to do this, and Apple can't do this for you. -
Hi I need a password, CPNU94094BO please help asap much needed
Hi I need a password, CPNU94094BO please help asap much needed
Hi,
In that case, the only option left to try would be to remove the rtc cell - see Page 63 of your Maintenance & Service Guide - then hold down the power button for 30 seconds.
Leave the notebook like this for 20 minutes, then replace the rtc cell, reassemble and try booting again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
HT1918 i need to security questions please help me
i need to security questions please help me
<Email Edited by Host>Read this about how to change the security questions: http://support.apple.com/kb/HT5312
If you can't use these procedures because you don't have a rescue email address you will have to contact Apple. See http://support.apple.com/kb/HT5699 -
ITunes has encountered a problem and needs to close. PLEASE HELP ME!!!!!!!
I bought the Apple airport router I installed it with the provided disc and that same day my iTunes would not come up. For window users I get the box that reads iTunes has encountered a problem and needs to close. We are sorry for the inconvenience with a box that you click to Send Error Report. Here is the error……… AppName: itunes.exe AppVer: 7.6.2.9 ModName: unknown
ModVer: 0.0.0.0 Offset: 000a019a
I figured that my music files somehow were corrupt and that shi_ happens. Well a week later I was having troubles with the Apple router so I returned it and uninstalled it from my program files C drive. Then I gave iTunes another shot and it opened. Weird, I know. Well my next router was a Net gear it worked fine but it lagged on COD4 while online with my PC, so I returned it. Then I bought a Belkin - N1 Vision Wireless-N Wireless Router and it did not come with an install disc just plug and play. That very same day my iTunes gave me that **** error again. This time I can’t try to uninstall it from my program files because it was plug and play. I already tried to do a system restore and I shut down my PC and start it back up without the router plugged in and still no luck. I also tried to repair iTunes and that didn’t work. I went to the Geek Squad and they tell me the two issues can’t be related (a router not allowing my iTunes to run). My computer is running on Windows XP Pro. I’m now playing my music through Windows Media Player. I’m in ****!!!! Can someone please help me!!!!! I also tried a few things on iTunes support and they didn’t work. I will be more than happy finically facilitate someone for helping me get my iTunes up and running like usual. Dallas @ [email protected] I’ll be checking this thread every day. PLEASE HELP!!!!!!!!!!!!!!!!!,......"The enstaller encountered errors before the requested operations for Quicktime could not be completed. To retry these operations at a later time, please run the installer again."
Checking on things that can cause QuickTime launch errors and install/uninstall errors now.
Have you at any stage installed an ACE or K-Lite Mega Codec Pack, any copies of the programs QT Alternative, QT Lite or Storm Codec, or any media converter programs that can convert files into QuickTime readable formats?
(I'm checking on these things because depending on the versions of the programs/codec-packs, these can install earlier versions of QuickTime componentry on a PC, which can interfere with the running/installing of a higher version of QuickTime.) -
my iphone 3g is stuck on the connect to itunes mode and it wont show up on itunes. itunes hasnt even detected it on recovery mode. what do i do i really need my phone.. please help
Please stop altering the fonts, it makes reading postings extremely difficult. If help is desired, making postings difficult to read is not the way to get help.
Put the device in DFU mode (google it), then restore.
Maybe you are looking for
-
I need <b>ALL</b> the tables that are available in <b>PLANT MAINTANENCE (PM) .</b> Thanks and Regards Ashok.N
-
Hi, Everytime we post IR, there is always a difference (only in decimal) between the balance of the IR and the total PO amount. So what we do is we put the difference in the Unplanned del costs under details tab. The difference used to fall in the
-
HT1386 iPad or iPhone won't sync with iTunes
My iPad or iPhone will not sync with iTunes. I have googled it and none of those suggestions worked. I don't see the device listed in the sidebar or on the top. It doesn't recogonize the unit when I first plug it in as to what I want to do. I have sh
-
Cannot edit or post replies to threads via Google Chrome v39
To whom it may concern: The WYSIWYG reply text box does not appear when attempting to edit or reply on a thread in Google Chrome version 39. Respectfully, Eric Sternot This question was solved. View Solution.
-
Can't uncheck "connected servers" from Finder Preferences
I have two Airport disks shared from my Airport Extreme Base Station. When they are mounted the disk icons are on my desktop. Because I don't want them on my desktop I've tried to remove them using Finder > Preferences > Uncheck "Connected servers".