Need to recover mailbox and address data from a G4 PB OS 10.3.9 to 10.4.4

My powerbook G4 HD just crashed. I am generally very dilligent about backing it up. However, I didn't really understand that I needed to export my address book and mailboxes in order back those up. To make matters worse I have been traveling extensively and haven't backed up my drive in a few months. Was able to easily mount the G4 PB drive in target disk mode from a G5. I am able to copy files and and can see the entire volume. I can even launch both the Mail and Address book apps from the G4 drive. How can I effectively rescue my address book and my email data files?

Copy the whole Library folder from your user account, but do not replace the whole folder in your new system. Just for backup reasons it will house a lot of your old settings.
Mails are in /Library/Mail/Mailboxes
Addresses are in Library/Application support/AddressBook

Similar Messages

Need help migrating Mail/iCal/Address data from 10.3 to 10.7

Hi, I'm helping a relative migrate from an 8-year old iMac (10.3.9) to a new one running Lion. Mostly it's going to be a clean sweep app-wise, but we need to move iCal, Mail and Address Book data across. Of course, these apps have changed a fair bit in across the last 4 'full' versions of OS X, and the folder structures within the user library no longer match between machines. Can anyone advise me what to copy and what to junk? I appreciate this is a bit of a vague question, but that's the situation. Any help much appreciated. Thanks.

The webtogo was dropped in 11.x. so the URL has changed. This is one of those situations which needs to be handled by support. Have you filed a request with support yet?
thanks
mike

Need to pre-populate and Extract data from static PDF form

Hi Jasmin or Jayan or anyone else that can answer.
I have a requirement to use Digital Signatures. Because of that, the forms must be static PDFs and the form variables will be “document form”. I want to pre-populate the form via an SQL query and custom render process and render it as PDF so that the submitter can apply a digital signature when he/she is done and ready to submit for approvalSubsequent approvers will also digitally sign the form. I know that I will specify the custom render to render only once and thereby preserve the signature(s) on the form. I do, however, need to extract data from the form to control the business process. I cannot access the data in the form the same way I do with an xdp and I also cannot pre-populate the same way I do with an xdp.
Any suggestions on how to attack this?

Parth, one problem with your approach is he will submit PDF and therefore you won't be able to put the PDF in a variable that's suppose to contain just xml.
The prepopulation should be the same. If you start off with an xdp, then you will call a render service that merges data with your xdp to create a PDF.
Now when you submit, you will submit the entire PDF back in the Document Form variable. In Workbench, you can use the FormDataIntegration service to extract data from that PDF that's being stored under Document Form var/object/document and put it in an xml variable. Then you can just use xPath to do your condition.
I'm assuming you'll just pass that same Document Form variable to the next step, because if you do any change to the PDF it'll brake the signature.
Let me know if I missed anything.
Jasmin

Recovering Rescue and Recovery data from a T61p with the GPU failure problem

My t61p has the GPU (1 long 2 short beeps) problem described in another thread. Apart from getting the laptop fixed, which will take several weeks, I have a more pressing problem getting my data back from this laptop.
I have been using Lenovo Rescue and Recovery religiously for the last two years to create monthly incremental backups on a USB drive. While I am trying to get my laptop repaired, I would like to at least recover my files from the backup and start working on a different machine.
I was told by Lenovo support that the only way to get to the data is to connect the drive to another T61p, running the exact same version of Rescue and Recovery I had on my original T61p. For one, I have to idea what version of R&R I had on my laptop. Secondly, I am in no position to get another T61p just to recover the data.
I would have thought that there would be a version of R&R that I could run on any Windows machine, and recover the data, but apparently that's not so.
Does anyone have any suggestions about how I can recover my data?
Thanks.

Hi,
the basic and most importatnt information, in this case is, that RnR can detect/read backups that have been captured using the very same version as you are using right now.
So in case you captured your backup using version xx.xx.xxx1 you cannot restore, or recover your backup using the version xx.xx.xxx2. You need to us the very same version.
As Win7 uses different version of RnR, this is the root cause.
Hope this helps.
Cheers

Help with writing and retrieving data from a table field with type "LCHR"

Hi Experts,
I need help with writing and reading data from a database table field which has a type of "LCHR". I have given an example of the original code but don't know what to change it to in order to fix it and still read in the original data that's stored in the LCHR field.
Basically we have two Function modules, one that saves list data to a database table and one that reads in this data. Both Function modules have an identicle table which has an array of fields from type INT4, CHAR, and type P. The INT4 field is the first one.
Incidentally this worked in the 4.7 non-unicode system but is now dumping in the new ECC6 Unicode system.
Thanks in advance,
C
SAVING THE LIST DATA TO DB
DATA: L_WA(800).
LOOP AT T_TAB into L_WA.
ZDBTAB-DATALEN = STRLEN( L_WA ).
MOVE: L_WA to ZDBTAB-RAWDATA.
ZDBTAB-LINENUM = SY-TABIX.
INSERT ZDBTAB.
READING THE DATA FROM DB
DATA: BEGIN OF T_DATA,
             SEQNR type ZDBTAB-LINENUM,
             DATA type ZDBTAB-RAWDATA,
           END OF T_TAB.
Select the data.
SELECT linenum rawdata from ZDBTAB into table T_DATA
     WHERE repid = w_repname
     AND rundate = w_rundate
     ORDER BY linenum.
Populate calling Internal Table.
LOOP AT T-DATA.
APPEND T_DATA to T_TAB.
ENDLOOP.

Hi Anuj,
The unicode flag is active.
When I run our report and then to try and save the list data a dump is happening at the following point
LOOP AT T_TAB into L_WA.
As I say, T_TAB consists of different fields and field types whereas L_WA is CHAR 800. The dump mentions UC_OBJECTS_NOT_CONVERTIBLE
When I try to load a saved list the dump is happening at the following point
APPEND T_DATA-RAWDATA to T_TAB.
T_DATA-RAWDATA is type LCHR and T_TAB consists of different fields and field types.
In both examples the dumps mention UC_OBJECTS_NOT_CONVERTIBLE
Regards
C

I need to back up and sync multiple iPhones to a single iMac. Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others. How can I do this without getting all of the contacts, etc. mixed? Tnx

I need to back up and sync multiple iPhones to a single iMac. Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others. How can I do this without getting all of the contacts, etc. mixed? Tnx

This might help: http://support.apple.com/kb/HT1495.

NEED THE LOGIC TO RETRIVE THE DATA FROM IT2001 SUBTY 0910 AND 0100

HI ALL,
ITS URGENT
NEED THE LOGIC TO RETRIEVE THE DATA FROM IT2001(P2001) SUBTY 0910 AND 0100.
BEST REGARDS
SUNIL

Hi,
Please find the logic to retrieve the data from IT2001.
<b>Infotypes : 2001 mode n."Declare the infotype in the infotypes declaration.
Get pernr.
RP-READ-ALL-TIME-ITY PN-BEGDA PN-ENDDA."Retrieves all the records of absence
LOOP AT P2001 WHERE SUBTY = XYZ.
Write the logic.
ENDLOOP.</b>
Regards,
Pavan Kattamuri.

HT2486 How do I export a mailbox to address book from Mail

How do I export a mailbox to address book from mail?

Unless you are willing to continually do an export of one contacts database and import of the other, switching back and forth, you'll either need to use some third-party contacts application or maintain two separate user accounts in Mac OS X. The built-in Address Book/Contacts application does not allow multiple address books.
Regards.

Best way to export and import data from an iPhone app?

How do people here prefer to export and import data from an iPhone app?
For example, suppose your app creates or modifies a plist. It might be nice to provide that plist to the user for separate backup and later allow them to re-import it.
How do people do that? Email the plist to an address? If so, how would one later get it back in?
Is there a common way people do this kind of thing?
Thanks,
doug

Or maybe the best approach for this is some sort of file synchronization feature? Is there a way of having files from the app's filesystem automatically get stored on the computer's filesystem when synchronizing and vice-versa?
doug

What are the settings master data and transaction data from r/3 to in APO.

Hi all,
Can u suggest me ,I need to conform in apo what are the setting when transfering master data and transaction data from r/3 to APO.
frm
babu

Hi
The data get transfered from R3 to APO via CIF which is SAP standard.
Please find enclosed herewith the link which will provide you detail information regarding it.
http://help.sap.com/saphelp_scm41/helpdata/en/9b/954d3baf755b67e10000000a114084/frameset.htm
Please let us know if it helps you. Please also let us know if you have any more specific question.
Thanks
Amol

Retrieving calendar and contacts data from OSX Server Time Machine

Due to a system failure I went out an brought a Macbook Air. My other Mac is away being assessed by a repair shop.
By plugging in the Time Machine drive from the other Mac I have managed to recover my files, videos, photos etc. Contacts and Calendars however are proving to to more difficult.
The old Mac was setup using Mavericks Server as a workaround for the removal of Calendar and Contacts iTunes sync in Mavericks.
The Contacts and Calendars are currectly synced with an iPad and an iPhone.
Is there anyway of recovering the Contacts and Calendars data from the Time Machine backup drive, My iPad or iPhone?
Any help appreciated with this complicated problem.
John

It sounds as if it is the same, or closely related, to this thread Time Machine Service Page in Server App says "Error Reading Settings"

How do I hide my mailbox and mail contents from other users, leaving other functions of my iMac accessible?

How do I hide my mailbox and mail contents from other users, leaving other functions of my iMac accessible?

You don't have to shut down the computer to switch accounts. All you do is click the Apple symbol in the upper left and choose Log Out and that's it. You can also set up Faster User Switching by:
1. Open System Preferences - Accounts
2. Click Login Options
3. Check the box called "Show fast user switching menu as" then choose from either icon, short name or name.
Then when someone wants to switch users they can. The advantage of this method is if you are have a document open and don't want to close it the document will remain open. If the other user attempts to shut down the computer they can't until you have logged out thereby saving all your data.
A very simple and elegant solution.

Upload material and contract data from file in CCM 2.0

Hi guys,
This might be a difficult one!
We have the following situation in a Client:
We are upgrading a Requisitite catalog (working with BBP 2.0)
to a CCM 2.0 catalog.
In Requisite, one can upload material- and contract data from a file (it is standard funcionality) into the database.
We need to have the same kind of funcionality in CCM 2.0 because our client does not prefer to work with XI (which is the standard SAP solution in these cases).
How can we accomplish this? maybe with some additional ABAP coding!
Our client is not working with Vendor Catalogs but I´m trying to see if we can use a dummy vendor catalog to accomplish material upload in CCM2 form a CSV file.
Anyone had to face this situation before?
If so, please provide some clues how to do it?
Thanks in advance,
Aart

SAP CATALOG CSV 2.0 <;>
Defaults;EN
Model
Catalog;All;;All Catalog
DataType;DATE;DATE;Date
Characteristic;Z_ACTION;/CCM/NAME;false;Action
Characteristic;/CCM/PRODUCT_ID;/CCM/ID;false;Part Number
Characteristic;/CCM/SHORT_DESCRIPTION;/CCM/DESCRIPTION;false;Description
Characteristic;Z_MATERIAL_TYPE;/CCM/ID;false;Material Type
Characteristic;/CCM/MINIMUM_QUANTITY;/CCM/MINIMUM_QUANTITY;false;Order Unit
Characteristic;Z_CONTENT;/CCM/MINIMUM_QUANTITY;false;Content
Characteristic;/CCM/LEAD_TIME;/CCM/LEAD_TIME;false;Lead Time
Characteristic;Z_SUPPLIER_ID;/CCM/ID;false;Supplier Number
Characteristic;Z_SUPPLIER_NAME;/CCM/NAME;false;Sup Name
Characteristic;Z_P_GROUP;/CCM/ID;false;Purchasing Group
Characteristic;Z_P_ORG;/CCM/ID;false;Purchasing Org
Characteristic;/CCM/CONTRACT_ID;/CCM/ID;false;Contract Number
Characteristic;/CCM/CONTRACT_ITEM_ID;/CCM/ID;false;Contract Item
Characteristic;/CCM/PRODUCT_GROUP;/CCM/ID;false;Product Category
Characteristic;/CCM/PRICE;/CCM/PRICE;true;Price
Characteristic;Z_DATE;DATE;false;Date
Characteristic;/CCM/LONG_DESCRIPTION;/CCM/LONG_DESCRIPTION;false;Long Description
Characteristic;/CCM/PICTURE;/CCM/ATTACHMENT;false;Picture
Schema;All;Z_ACTION;Z_MATERIAL_TYPE;Z_CONTENT;Z_SUPPLIER_ID;Z_SUPPLIER_NAME;Z_P_GROUP;Z_P_ORG;Z_DATE;All Schema
Category;10000300;;;ABC
Category;10000400;;;DEF

Drag and drop data from Numeric Control or Numeric Array to excel file

I have two inquirries about drag and drop:
1. How to drag and drop data from a Numeric Array or Numeric control to excel file
2. How to drag and drop data from a Numeric Array or Numeric control to an Numeric array Indicator?
The item 2, I tried it with the event structure, but it didnt work.
Please do reply.
mytestautomation.com
...unleashed the power, explore and share ideas on power supply testing
nissanskyline.org
...your alternative nissan skyline information site

There are very good drag and drop examples that ship with LabVIEW. Have you looked these over to see if they can be modified for your needs?
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

Downloading MA, Contract and Attachments data from CLM

Hi,
Can someone please let me know how to download MA, Contracts and attachment data from SAP CLM? Meaning, contracts created in CLM needs to be treated as legacy data and then uploaded into another system. I understand that the Search Master agreement report and Sub Agreement report can pull any field level data from the MA and SA. But how does one download data from Contracts UI and Attachments?
Any help is appreciated.
Thank you,
Vikram

Hi Vikram,
If I can get you exactly you are talking about downloading data,
You can go for 'search all Master agreements' or 'Search all MA and Contract Documents'click on excel/pdf icon mentioned at top right corner and download it.
To Download specific Contract you go for 'Search master Agreements and Contract doucuments' click on specific CD and it will be auto downloaded.
The other way is exporting oma files, which is done in setup>system setting>export, go for options, data set/single object and export it.
Other way you can do via Workbook process which is a bit lengthy one.
Regards,
Ravi

Need to recover mailbox and address data from a G4 PB OS 10.3.9 to 10.4.4

Similar Messages

Maybe you are looking for