Need to reinstall FC Studio?
I had to re install Tiger because of some read/write issues discovered during a tech tools scan. I didi "archive and install" and most things are ok. FCP and Compressor and soundtrack pro and motion will not open. FCE, DVDSP4, live type and soundtrack are ok.
do I need to reinstall FC studio apps, or is there something I'm missing that's faster?
thankx
BBP/BR
Probably better to just bite the bullet and reinstall. I had exactly this problem. I had done a reinstall of the OS to allow itunes to manage my ipod correctly and had to reinstall a few of the fcstudio components.
Similar Messages
-
Do I need to reinstall DVD STudio Pro 4?
I have two problems with DVD Studio Pro 4 that apparently have no answers in the manual:
1) Some (many) of the Apple menu templates lose all of their graphics when I drag them onto the menu window. I might choose, say, "Frames Cover" and drag it onto the menu window, but instead of the graphics in the thumbnail on the palette, what I get is a box with a gray arrow where the drop zone is supposed to be, a white background, no colors, nothing. Some of the templates come over normally, but I am really limited in my choices - about 50% or more have no graphics when dragged or applied onto the menu window. Is there some configuration setting I don't know about to fix this?
2) Assuming I have one that comes into the menu window OK, the buttons do not display the active/selected/resting states when I click on the three little icons at the bottom of the menu window to see the display in each state. The buttons become "active" only when I click on them with the mouse, but I am unable to check their "state."
I burned a finished project to a DVD only to find that the buttons would not show a selected state with the remote control and so, of course, I was unable to select anything.
Very frustrating. I wasn't expecting stuff like this with the Mac which is new for me, it's reminiscent of Windows when I often had to reinstall software that was somehow corrupted.
Please help.
BarryThanks for the rapid reply. I went ahead anyway and deleted DVD Studio Pro 4 and reinstalled it. When I clicked on a template, the same thing happened. I tried every one of the templates and suddenly realized that the images in the thumbnails in the palette are just samples (including the color in some cases). I assumed that I would get an identical set of images that would then have to be changed. Pretty dumb, huh? I think what threw me is that the very first template I used is the one with the theatre curtain opening and closing, with the heads of the audience at the bottom - it's pretty detailed. I assumed that all of the others would be similarly detailed. OK, lesson learned.
The buttons are another matter. I just cannot get them to display their state. To answer your question about my "built" project burned onto a DVD, yes, if I press the "enter" button on my DVD remote, it begins playing a selection. I have a special problem with this particular DVD, as it contains the same movie four times: I was trying to determine the differences between an HDV movie exported as a 1920 X1080 format, secondly as a 720 X 480 format, thirdly as a 1440 X 720 format, and finally as a 720 X 480 anamorphic format. So in this case, I have no idea which of my four "results" is being shown on the TV as I don't know which is the default if that is the correct term. But yes, one of them plays, except I cannot choose it.
I have watched the tutorial included with the software countless times, it appears that all I have to do is select a button and then click on whichever of the three little "state" icons at the bottom, but it doesn't do anything. Only the mouse clicking on the button highlights the button, that doesn't help on a TV set. And it doesn't matter which template I choose, the "state" buttons do not work.
Barry -
I need to reinstall logic 8 but lost serial number
I have had to wipe my hard drive and now need to reinstall logic 8 before i install Logic 9 upgrade, but I have lost the serial number for 8. What should I do?
Hi
If you intend to upgrade to Logic 9, you should not need to actually install Logic 8 (unless you want to).
You will need the 8 Serial number in either case if you are using an upgrade installation disk set for Logic Studio (2).
Apple may be able to help regarding lost serials:
http://support.apple.com/kb/HT1861
CCT -
Adobe Bridge is not fuctiong correctly, I need to reinstall CS2
I have Adobe CS2, I recently took a ton of pictures in Large and Raw with my Canon Camera. When I upladed then to my computer and wanted to work on the .RAW images my Bridge will not allow me to adjust the .RAW images. I am assuming I need to reinstall my CS2. How do I do this with out losing my activation codes.
Thank youNo, do not uninstall/reinstall. What you need to do is reset preferences. Hold down the Crtl key and start Bridge. You will get a reset window, choose all 3 options. That should get you back to normal.
-
I received an online gift card for Father's Day. When I tried to redeem the gift then I received a error message saying I had some itune files missing and I needed to reinstall/download itunes. Will I still have my previous purchase credits after downloading and reistalling itunes?
You will, because the credited funds are on your iTunes account, not the application. When you reinstall iTunes just configure it with your old iTunes account and your credits will be there waiting for you.
-
I need to reinstall my computer, how do I deal with Premiere pro and After effects?
Hello,
As my question states I need to reinstall my computer (laptop) and I'm not quite sure on how to deal with Premiere pro and After effects.
I am thinking that I need to do some sort of backup and save my projects and footage on a sepparate drive.
If I reinstall my computer, install my creative suit production premium, and move back all of my projects and footage, won't I have to re-link every single clip?
I am currently workning on several different projects and having to re-link everything is something I don't even want to think about, that would take me days if not weeks.
Another option on my mind would be to use Creative cloud. I do have the free version but I have never used it even once before and I'm not quite sure what the purpose of the cloud is and if this is a way to use it.
I have no idea how to go about this computer reinstalation without either loosing tons of work or having to re-link every single clip used.
I am videoediting only as a hobby so I have no experience working with other people and sharing projects or the like, wich is my understanding of what the cloud is for.
Any and all help would be grealty appreciated, I know this is probably really easy but ever since i got my Suit I haven't reinstalled, upgraded och changed my computer so I am just clueless as to how to go about this.
I have Creative suit production premium, I also have the free Creative cloud.
It is only Premiere pro and After effects that I am using and am worried about.
Thank you for any help.
-Lisa Kajupank
(and oh, I just notice my name - umustbejoking - I think I just wrote that cause they wouldn't let me use anything else, saying it was already taken. So nevermind that haha.)
Message was edited by: umustbejokingIf the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
(84620) -
all of a sudden my itunes wont come up when i hit the desktop icon. un and re installed many times, tried new users, it finally gave me "you need to reinstall sqmapi.dll " im a noob and i have know idea what that is or where i can get it. i cant open any file or library that has anything to do with itunes except safari and quicktime are fine. im about to pull out whats left of my hair.
Okay, that's got one thing ruled out at least.
Can you check something for me, big? I'd like to see if iTunes launches with the Bonjour Service disabled.
In your Start menu, right-click Computer and select "Manage".
Expand "Services & Applications".
Open "Services". (Perhaps maximise the screen to better see what's going on.)
Right-click the Bonjour Service and select "Properties".
In the General tab, set the Startup type to "Disabled":
... and click OK.
Restart the PC and try launching iTunes. Does it open this time? -
I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?
Hello,
That means it can find the Hard Drive, or can't find the things needed for booting.
See if DU even sees it.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?
I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?
-
Do I need to reinstall Lion because my iPhone stopped being recognized by...
Do I REALLY need to reinstall Lion because my iPhone stopped being recognized by Image Capture, Aperture and iPhoto but still shows up in iTunes?
I was on the phone with Apple Support with 5 different Advisors for more than 3 hrs today and we were not able to resolve the problem (yet). Although the problem is frustrating, it's always kind of a pleasure chatting with the Advisors. (I said kinda)
Approx 2 weeks ago, iPhoto, Aperture and Image Capture all stopped recognizing my iPhone. Oddly, iTunes has no problem recognizing the iPhone. Here are just a few of the things we tried but didn't get the apps to see the iPhone again:
- Removed and deleted all photos on camera roll using a windows machine
- Removed all other photos synced between my iMac and iPhone
- Made sure an image existed on the camera roll
- Recorded some video on iPhone and then tried to get iMovie to recognize device
- Restored (gulp) the device followed by a restore from back-up
- Restored again (double gulp) but this time to factory settings and kept the device as a "new iPhone"
- Logged on as different users
and on and on.
Also, after noting that my machine refused to send a systems report to my Sr Advisor (Jimmy) at Apple, he suggests we re-install Lion (ack). But when we went to access the Recovery Partition we realized it wasn't there.
No recovery partition?
Not sending system reports to Apple?
Several Apps not seeing iPhone while others are recognizing the device?
So now I wait for Lion to arrive on one of those nifty Apple thumb drives for me to try re-installing ;-(
The following screen grab shows my iPhone in iTunes but not recognized by Image Capture. URGH!Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed. -
My ical is acting weird. When I click on week view ical disappears. When i click on month view it zooms in close i have to click it again to see the whole month. In day view if i scroll up or down...wait i can't. What's up
If i need to reinstall how do i do it and can i just reinstall ical, everything else is working great.
JesseJesse,
I hesitate to recommend a reinstallation of a specific application because I have not seen evidence that it is an effective troubleshooting procedure. On the other hand, I would be inclined to offer a reinstallation of the Mac OS X 10.4.6 Combo for PPC which is appropriate for your Powerbook.
For what it is worth, I have occasionally noticed the zoom behavior on my system. It has happened very rarely and I have not pursued an answer. The other behavior which you have observed may be related to the way you use Sync and iDisk.
Your new questions are valid and you would benefit from starting a new post in either the .Mac Sync or the iDisk forum.
Good Luck,
;~) -
I have replaced my faulty hard drive on my macbook air 1.1 with a new ssd, I need to reinstall the original software,where can I find this on the apple site?
There is no download for the software. The factory software that you are looking for is called ilife. It is all of the software that would have came preinstalled with your mac on your original hard drive when you first bought it. You will have to get new software on your computer. This might actually be a great opurtunity to upgrade to Lions. Search the Lions software in the mac store and it will come up. Click add to cart and check out. The price for it is $20. I defientely recomend Lions, it has alot of new great features. Then wate for the install disk to come in the mail. when it come just pop it in and follow the step by step instructions. If you dont want to upgrade to lions however you can download the ilife package from apple.com for a small price. Hope this helps.
-
I want to upgrade to Mavericks. Will I need to reinstall all of my apps and copy my files back to the hard drive? I have not installed an OS on a Mac before and I'm wondering whether it is as involved as on a PC.
Short answer: You do NOT have to reinstall all your apps and copy your files back.
Longer answer: Upgrading the OS does not touch any user files. Upgrading the OS should not interfere with any applications which are compatible with Mavericks. In my experience non-Apple apps are generally left unchanged by the upgrade. It is possible that some apps may need to be upgraded. One good resource for checking application compatibility is RoaringApps.
Finally, it is always wise to backup everything, just in case. -
Received a message today that iTunes needed to reinstalled but when attempting to do so I get a message 'Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services' ???
I am having this same problem. I took Kappy advice on restarting the Apple Mobile Device Service, however that did not work. I got this message in a pop up window that came up immediately.
Windows could not start the Apple Mobil Device Service on local computer.
Error 1053 The service did not respond to the start or control request in a timely fashion.
I have already uninstalled itunes, all the related programs and I cannot reinstall, this Apple Mobil Device message stops the install.
Can anyone please help? -
I had an error that said I need to reinstall Itunes. I uninstalled and attempted to reinstall and got a pop up "Serivce Apple Mobile Device failed to start. verify that you have sufficient privledges to start system services. Help!?!?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates
Maybe you are looking for
-
HT4061 my screen went black but it still makes sounds?
my phone out of no where the screen went black yet I still hear text notifications
-
ChaRM scenario for only one productive system
Hi CHaRM-experts! I would like to know whether or not is it possible to use the Change Request Management scenarion for only one productive system? It means we have systems and cases where we should apply the emergency correction only in productive s
-
Updated to iOS 7 and now car controls don't work
I recently updated my iPhone 5 to iOS 7, and now it no longer works properly with my vw golf sound system. I used to be able to plug it in and control it through the touch screen in my car, but now everything is jumbled and the controls don't work. P
-
Can't see navigationItem in the debugger
Hi All, In the expressions window I can't see the value of self.navigationItem when debugging inside the viewDidLoad method of a view controller. The code does not throw an error for my line of code, so why can't I see the value of this property? In
-
I wanted to install Norton AntiVirus software on my MAC last night because I work in a mixed environment and don't want to risk getting some crap on my MAC. I plan on installing Parallels to run Windows. Anyway, when I went to install it I was inform