Need to remove 32SL410U Toshiba Television Receiver case

I need to replace antenna/cable plug on 32SL410U Toshiba, but first step is to remove the case. I have removed each of the screws marked on the back and have also removed the base and screws hidden under the base.
The cover is still attached somewhere that I cannot locate. Is there a special tool needed to get the cover off? What are the pair of unmarked fittings that are also through the cover - they do not appear to be hex keyed or torx.
Any tips or tricks to get this open without breaking something?
I have scoured the web for this info with no success.

Manny:
Your iBook has a 2.5" Parallel ATA/IDE HDD. Place it in a firewire enclosure like this one connect it to another Mac via firewire and retrieve your data.
cornelius

Similar Messages

If I requested to erase a stolen device on find my iphone but did not receive a confirmation, do I need to remove the device before restoring the replacement (new) iphone? Can my stolen iphone still be erased if I restore my new iphone?

if I requested to erase a stolen device on find my iphone but did not receive a confirmation, do I need to remove the device before restoring the replacement (new) iphone? Can my stolen iphone still be erased if I restore my new iphone? I am just concerned with someone accessing all my content.

1. No.
2. Yes if it's still on online

My Macbook Pro wont play sound through Mini DisplayPort to HDMI adapter on toshiba television anymore. The sound plays through sony or samsung television, but not toshiba television.

I have a Macbook Pro early 2011 running on mountain lion version 10.8.2. A while back, i purchased a mini display port thru HDMI port so i could watch dvds on my toshiba television. it all worked great for a while, then the sound just stopped working. At first, I thought the mini display port connector must have broke, until I plugged it into a sony television and it worked. I also tried using it through a samsung television and it worked just fine. Why does it not work through the toshiba television anymore? The picture works fine, but the sound does not come thru the television anymore. My mac is set to play sound thru the HDMI port and it doesnt. When i switch it to built in internal speakers, the sound comes thru my mac, but when i switch it, no sound comes out. Any help would be greatly appriciated. Thank you!

I am still waiting to receive a response from them, but i dont think they'll be much help. the television still works fine and all of the ports on the back, including both HDMI ports, work perfectly.

How do you remove a device off of an Apple ID? I have an I pod and an I phone hooked up to the same account need to remove the I pod and start up his own apple account.

I have an iPod and iPhone connected to my apple account. I need to remove the iPod as it receives all my text messages. I want to sign him up with his own account and not use mine.

Yes, that erases everything from the iPod.
He can redownload his purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I need to remove an AOL email account that is not attached to my Apple ID. This is on an iPAD. It is not showing in Accounts. However, I cannot delete the mailbox,. Please advise

I need to remove an AOL email account that is not attached to my Apple ID.
I am receiving email and I cannot delete the mailbox. Please advise.
the account is not viewable in settings.

I am assuming that this mail is coming into the Mail App, not another third party app, correct?
Is the AOL account showing up as its own mailbox in the mail app? (e.g. I see "All inboxes", "iCloud", and a third mailbox that is my second email address.)
Every "mailbox" except the "all inboxes" are going to be in the settings under mail, Contacts and calendars.
If the mail is coming into a mailbox that isnt the AOL mailbox, then it sounds like you have your AOL mail being forwarded to another email adress.

[JS] Need Help Removing File extension (in CS2 and CS3)

Hello All.
I have a menu in a dialog that needs to list some file names, but without their file extensions (which will always be .txt in my case). The following is some code that successfully does this in CS3, but I also need it to work in CS2. Do you have any other ways to do this? One code that works in both versions (CS2 and CS3) is ideal.
myNameWithoutExtensionFunction = function( myNameWithExtention ) {
myNameWithoutExtension = myNameWithExtention
myEndOfFileName = myNameWithoutExtension.lastIndexOf( "." ) // get the last period (.) in the filename
if ( myEndOfFileName > -1 ) {
myNameWithoutExtension = myNameWithoutExtension.substr( 0, myEndOfFileName )
return myNameWithoutExtension
Thanks in advance.
Dan

I realized my mistake. The above code works just fine in CS2. My mistake was elsewhere. The name I was sending to this function wasn't being recognized by CS2. Once I corrected that and sent a valid name to this function it worked. So in case someone needs to remove file extensions, feel free to use the above function!

Need help removing Creative Audio Control Panel

So I've been trying to get the Creative Consol Launcher to work with my soundcard again and found that in my "Programs and Features" list in windows 7 there is one item of Creative labs software that I can not remove. It is called "Creative Audio Control Panel" and when I attempt to uninstall it it tells me "C:\Program Files (x86)\InstallSheild Installation Information\{7E96A7F-AFE3-47-87B-583E37639E8}\SUPPORT.Cab not found."
Whenever I try to use the Creative Console Launcher it tells me "There are no supported audio device[sic] available. You need to close the application. Click OK to close the application now."? I assume it's trying to launch Creative Audio Control Panel which for some reason or other is no longer present on my system but was never properly uninstalled. Also, great work on that error message - seems like Creative needs more proof readers.
In other words it seems the file I need in order to uninstall this broken program is missing - any idea what I should do? I've tried seeing if I can reinstall the program but I can't find any setup file for it online - all I can find is "Creative Console Launcher" which seems to intigrate a launcher feature into volpannel, but since it doesn't have the Creative Audio Control Panel to actualy launch it just gives me error messages if I want to get into my EAX settings or mixer or anything like that. If anyone knows how I can uninstall/reinstlal this program (in windows 7) I'ld be very greatful.

Well I believe I have found a solution to my problem and it is manyfold so here goes.
First off, Creative Customer Support Americas corresponded with me via e-mail and notified me that there are known issues with all PCI cards and Creative Audio Consol in Windows 7 (which is to say they don't work together at all).
After getting this info I removed my SB 0790 card and plugged in another one I had handy - it's still a SB X-FI Xtreme Audio but this one is has a PCIe interface and a digital audio in/out jack on the back to boot - this card is manufactured not by Creative but by MSI (licenced I assume) and came with my motherboard (good thing I had it laying around).
Initialy I had the same issue - even uninstalling everything related to creative and re-installing the hotest newest drivers from the site simply wouldn't resolve the issue. Finaly I downloaded a 3rd party program called CCleaner - a freeware utility that can clean up registry errors and delete items off the program list by force if need be (and it was in this case). I used that to completely eradicate Creative Audio Console and Creative Console Launcher, re-installed the latest drivers and audio pack for the PCIe card, and then even had windows update the driver again after that (the result of which was not a new driver version but it did seem to download and install something - no clue what). After all of that I once again had a functioning version of Creative Audio Consol back on my computer - and now it recognizes that I have a valid card installed and I've got access to all the features I was missing. The interface for Creative Audio Console looks a bit different than it used to (no longer a fake looking stero but instead a fairly plane interface) but whatever it's working and that's what I care about.
Oddly enough with all those installs it never put Volume Panel or Creative Consol Launcher back on my computer, I wound up having to install those off of the MSI card's driver disk to get easy access to the Creative Audio Panel again (otherwise I'd have to either make a shortcut or go straight into the install directory any time I want to launch it - now though I can launch it right through the Volum Panel).
One persistant issue still remains: In my recording audio device list I am still missing: "What U Hear" but it has been this way since I installed Windows 7 for the first time in October when it releaed, and I have given up hope on ever seeing What U hear again - If I want to record from my soundcard I have a 3rd party freeware utility called "Virtual Audio Cables" that are a bit clunky but get the job done.
Conclusion:
Though it may claim on Creative's support page for the SB0790 (Sound Blaster X-FI Xtreme Audio) soundcard that the latest drivers support Windows 7 it is abundantly clear that this is NOT the case. You will manage to get audio out of it, but almost no other creative aplication is going to work with your card or even detect that a valid working SB card is installed. It seems the only aplication I could get working relyably was the auto updator (which was able to see I had the card installed) and Volume Panel. By the admission of Creative Customer Support America, however Creative Audio Panel will not work, and I have observed that Creative Consol Launcher does not function properly either. Indeed even plowing through the file system you'll find support only for XP and Vista versions of the drivers - there is no Win7 specific driver for either this card or it's PCIe counterpart.
Also don't expect to have access to the "What U Hear" utility - this goes for the PCIe version of the card as well. As ever, it seems the marketing guys are making claims about the card that can't actualy be backed up, sure it's techincaly illegal, but only if your customers are willing to start a class action lawsuit over a 50 dollar soundcard that sort-of works anyway.
Issue resolved for now - and I am no longer pulling my hair out in frustration.
Links to the Utilities I used to make my card functional:
CCleaner
http://www.ccleaner.com/
Virtual Audio Cables
http://software.muzychenko.net/eng/vac.html

Do I need to remove the application?

I am working on iPlanet 6.0SP4.Do i need to remove the old application when I redeploy the new one. Because there is also an option called "override" when doing the deployment, what that mean?
If I didn't remove the application, and redeploy with override option, is it possible that two same classes will be stored in the ldap server with different id

Hi,
See when you deploy any ear application it first copy it in "<iAS-install-dir>/ias/JAR" dir and extract all the war/jar modules in it. And after it picks the modules from here and explode in respective directory under "<iAS-install-dir>/ias/APPS or .../APPS/modules". When you say Override modules, it replaces all the old modules having the same name with the new one and then explode them.
Moreover when you deploy any module it will make entries in LDAP under "Application server/6.0/J2EE-Modules/<war/jar-module-name>" and for each Servlet/JSP/EJB under "Application server/ClassDef/<GUID>".
So when you redeploy same application again and you don't change the module names then it will overwrite this registry information as the module names and GUID is same (in this case you have to restart iAS). But if you reassemble application using deploytool, then it will create new GUIDs for each components in your app and the second entry will be change in this case.
Now when ever plugin will send the request for the new app it will read GUID from the "J2EE-Modules/<war/jar-module-name>" node and will send it to the KXS and the KXS will see what class to load after looking at "ClassDef/<GUID>" node.
If the modules have the same name as original Application, then the old GUID entries in registry are of no use and will make iAS slow only as it reads the whole registry while starting.
Please feel free to ask further questions.
Sanjeev,
Developer Support, Sun ONE Application Server-India.

Do I need to remove Bootcamp Partition before restoring with Time Machine

Hello - anyone familiar with this scenario.
I have used TIME MACHINE from the very first day I had my iMac. So it was started almost immediately after the initial boot of a brand new iMac case I ever needed to restore my Mac to that initial Day 1 state.
That day has come, but it's now two years, and in that time I have installed BOOTCAMP, Parallels and Windows 7. That process created another partition, and created the required 'links' between my OSX and Windows via Parallels etc.
So my question is this - can I do a 'Restore from Time Machine' over the top of the new partioned set up of my iMac OR or will it be now totally confused because of the changes I have made to my system in that time, and do I firstly need to remove Windows, Bootcamp, and erase the partitions I created back to one.
So in summary - will Time Machine do this when it restores, or do I need to do it before I restore?
I also have a CARBON COPY CLONE from Day 1 too. Am I better using that instead - and if so, same question - will i need to remove Windows, and my Bootcamped partion first?
(My system is iMac late 2012 still running OSX Mountain Lion if that makes any difference)
Thanks

popsynic wrote:
Hi - thanks for responding
"Is Parallels using the BC partition as a VM, or is it a separate VM with its own virtual disk?"
I don't know - basically I have a BOOTCAMP partition and Windows is installed on that (using these instructions from the Parallels website) I can then either open up Windows from in OSX Moutain Lion while keeping my mac running (and windows will run in its own little window - but within OSX. OR I can also choose to boot dircetly wi windows when I tuen on my MAC - and then it runs independently of my OSX.
You are using the BC Windows and running it as VM. There is no separate VM with virtual disk.
"Are you planning to erase the internal drive(s)?"
I wasn't sure - I want to restore my iMac like it was on the day I had it, before I partitoned BOOTCAMP and installed windows. So my question is, will the TIME MACHINE restore get rid of WINDOWS and the BOOTCAMP partition for me as part of its restore - or do i have to that, and then restore using Time Machine
It is much simpler to run BC Assistant and use the last option - "Remove Windows". It is a bit cleaner.
"If the backup on TM which started on Day 1 has continued as you have made changes, including BC/Windows/Parallels, it has continued to backup OS X and partition information. I suggest you backup Windows using Windows Backup to a separate external drive formatted as NTFS, and also consider Winclone or CampTune for a OS X compatible BC backup, if you run into any issues."
As above, I am not bothered about keeping Windows or the BOOTCAMP partition, I want to resore my iMac to the DAY 1 status - when I did my first full Time Machine backup - which was before I created a Bootcamp partition or installed Windows.
I suggest removing Windows via BCA and backing up to Time Machine. You will keep you OS X intact and keep all your files on the OS X side.

Do I need to remove Bootcamp before Time Machine Restore?

Hello - anyone familiar with this scenario.
I have used TIME MACHINE from the very first day I had my iMac. So it was started almost immediately after the initial boot of a brand new iMac case I ever needed to restore my Mac to that initial Day 1 state.
That day has come, but it's now two years, and in that time I have installed BOOTCAMP, Parallels and Windows 7. That process created another partition, and created the required 'links' between my OSX and Windows via Parallels etc.
So my question is this - can I do a 'Restore from Time Machine' over the top of the new partioned set up of my iMac OR or will it be now totally confused because of the changes I have made to my system in that time, and do I firstly need to remove Windows, Bootcamp, and erase the partitions I created back to one.
So in summary - will Time Machine do this when it restores, or do I need to do it before I restore?
I also have a CARBON COPY CLONE from Day 1 too. Am I better using that instead - and if so, same question - will i need to remove Windows, and my Bootcamped partion first?
(My system is iMac late 2012 still running OSX Mountain Lion if that makes any difference)
Thanks
OS X Mountain Lion (10.8.4), i7 / 3TB Fusion Drive / 24GB Ram

popsynic wrote:
Hi - thanks for responding
"Is Parallels using the BC partition as a VM, or is it a separate VM with its own virtual disk?"
I don't know - basically I have a BOOTCAMP partition and Windows is installed on that (using these instructions from the Parallels website) I can then either open up Windows from in OSX Moutain Lion while keeping my mac running (and windows will run in its own little window - but within OSX. OR I can also choose to boot dircetly wi windows when I tuen on my MAC - and then it runs independently of my OSX.
You are using the BC Windows and running it as VM. There is no separate VM with virtual disk.
"Are you planning to erase the internal drive(s)?"
I wasn't sure - I want to restore my iMac like it was on the day I had it, before I partitoned BOOTCAMP and installed windows. So my question is, will the TIME MACHINE restore get rid of WINDOWS and the BOOTCAMP partition for me as part of its restore - or do i have to that, and then restore using Time Machine
It is much simpler to run BC Assistant and use the last option - "Remove Windows". It is a bit cleaner.
"If the backup on TM which started on Day 1 has continued as you have made changes, including BC/Windows/Parallels, it has continued to backup OS X and partition information. I suggest you backup Windows using Windows Backup to a separate external drive formatted as NTFS, and also consider Winclone or CampTune for a OS X compatible BC backup, if you run into any issues."
As above, I am not bothered about keeping Windows or the BOOTCAMP partition, I want to resore my iMac to the DAY 1 status - when I did my first full Time Machine backup - which was before I created a Bootcamp partition or installed Windows.
I suggest removing Windows via BCA and backing up to Time Machine. You will keep you OS X intact and keep all your files on the OS X side.

My response is French has removed by Toshiba

My reponse is french has removed by Toshiba !!!
See the email receive this day :
"Dear Forum User,
As international most used language, we have defined English as standard language. On this way whole content will be understandable for all Toshiba Support Forum members and visitors. For this reason we have removed your posting.
Please consider that this forum is based on the English language only and we would appreciate when you post in English next time.
Thanks for understanding.
Toshiba Technical Support Forum
Forum Moderation "
So, I have one solution for install the video driver under Windows XP.
for the solution, write me on my mail. [email protected] because I write only in french language.
French language is censured by this Toshiba forum.
END
Message was edited by: Olivier_Paris

And why you dont write your solution in English language here in the forum?
The message says everything:
>As international most used language, we have defined English as standard language. On this way whole content will be understandable for all Toshiba Support Forum members and visitors. For this reason we have removed your posting.
There are many people who understand only the English language and therefore the English language is a standard here in the forum.
So it would be very useful for others if you would share your knowledge (like other users do) and post the solution in English.
PS: I see you have posted other messages in English so it shouldnt be a big problem for you.

HT4865 i need to remove my iphone 5 from my apple account. how to do it?

I need to remove my iphone from my apple account but when I sign into the account I am only able to edit personal info. Please help!!!

I'm not sure which you were trying to do, but if you want to unregister it with Apple, you can:
Go to: https://supportprofile.apple.com/MySupportProfile.do
Log in with your Apple ID.
Click on ">" to the right of the phone listing
Click "unregister"
If, on the other hand, you are trying to change the Apple ID on the phone, to do this:
For iMessage, go to Settings>Messages>Send & Receive, tap the ID sign out, sign back in using the other ID.
For FaceTime, do the same thing in Settings>FaceTime.
For Purchasing, do this in Settings>iTunes & App Stores.
For iCloud, you'll have to first save any photos in your my photo stream album that are not in your camera roll or backed up somewhere else or you will lose them. To do this, open the photo stream album in the thumbnail view, tap Edit, tap all the photos you want to save, tap Share, then tap Save to Camera Roll. You then have to go to Settings>iCloud, tap Delete Account, then sign back in with your updated credentials. This will delete the account and iCloud data from your phone but not from iCloud. Provided you are signing back into the same account and not changing to a new account, your data will be synced back to your phone when you sign back in. However, if you are setting up a new account with a new ID, when you delete the account be sure to choose Keep on My iDevice, and choose Merge when you turn on your data syncing with the new account to upload your data.

HPE-270F PC - need to remove wireless card. Has wires attached to top of cage. Need to discuss

Need to remove wireless card but has three wires attached and two are cttahed to top of case.
Assume they are for receiption. Instatting TV tuner and need to slot.
Any issues cutting and removeing these wires. Can send photo if needed to resolve issue

As you guessed, those are antenna wires. Don't cut them just pull them off the card, wrap each in a piece of electrical tape and push them up and out of the way. You might want wireless again someday. The connectors can be removed by turning 90 degrees and just disconnecting from the nipple on the card. I do see this is a desktop. Maybe a picture would help.

G4 Ti4200-TD8X, need to remove fan + freezing

Hihi..
I need to remove the fan on my GFX, but I don't know how - since I can't find something which looks like a screw, only some black rubber thingies which appears to go through the fan and all the way onto the back plating.
But I want to know how to remove it.
I also have a problem with freezing up.
It appears like overheating - but after reading a few threads on this board, I'm not really sure. Also looking upon the amount of cooling within my case, I can't see how it possible can be overheating.
My system specs are :
ECS K7S5A ATX motherboard.
AMD Athlon XP 2.2Ghz
640 SD PC133 rams (Noname)
MSI Geforce 4 ti4200 agp 8x 128DDR's (Running with agp 4x
400Hz PSU
Thermal take Silent Viking II (80x80 Fan)
Thermal Take Technology ThermalCase MidiTower (4 80x80(Metric) Fans, two backside, two frontside)
IRQ : (Only listing PCI)
5. Creative AudioPCI (ES1371, ES1371) (WDM)
5. MSI MS-Starforce GeForce4 Ti 4200 with AGP8X (NVIDIA GeForce4 Ti 4200 with AGP8X)
5. Realtek RTL8139 Family PCI Fast Ethernet NIC
5. SiS 7001 PCI to USB Open Host Controller
11. Multimedia Audio Controller (It is disabled)
11. SiS 900-Based PCI Fast Ethernet Adapter
12 SiS 7001 PCI to USB Open Host Controller
Please help.
~x~ Janine ~x~

Well I changed my cards around abit and ended up with an IRQ setting like this :
5. MSI MS-Starforce GeForce 4 Ti 4200 with AGP8X
5. SIS 7001 PCI to USB Open Host Controller
11. Creative AudioPCI
11. Realtek RTL8139 Family PCI Fast ethernet NIC #2
11. SiS-900 PCI fast ethernet adapter
12. SIS 7001 PCI to USB Open Host Controller
Now the problem within #5 - is that "SIS 7001 PCI to USB Open Host Controller" appears to be my USB ports, which are onboard and I can't just move them around like my Netcard and soundcard - my GFX I can't move either, since I only have one AGP slot.
It still does the same freeze up however.
Also, I would really like to know how to remove the fan on the GFX, since I can't really clean it properly if I do not remove it. (It's a little dusty, and it will decrease heating if I get it cleaned properly)
~x~ Janine ~x~

I will give my laptop to someone else, how do I unlink my apple id? Do I need to remove the apps I downloaded with my id?

I will give my laptop to someone else, how do I unlink my apple id? Is it just the app store unlink? Do I need to remove the apps I downloaded with my id? Will they get removed when I unlink my apple id?
Are there any other procedures I need to take into account?
Thanks

You need to remove all software that you acquired from the Mac App Store, including newer versions of OS X. These are all registered to you and encoded with your Apple ID in the licensed copy. You cannot legally pass any of the software to the new owner, which is why Apple states to erase the Mac and return it to the version of OS X that shipped from the factory on the Mac. You must also remove any older Apple software that you installed by DVD or pass the DVD to the new owner with the Mac.

Need to remove 32SL410U Toshiba Television Receiver case

Similar Messages

Maybe you are looking for