Need to remove Authentication Source Category from login name

We are synchronizing with an LDAP and need the loginname to NOT include the auth source category, but cannot find an option to do this. The LDAP is called passport. After synch the user's login name is passport\jtokeeffe. We have a script to remove the passport prefix but every time we run the LDAP job to only bring in NEW users, it resets all the existing user's loginnames. The problem is, the username that is available in the Request object from the JSR168 container has "passport\jtokeeffe" as the username. Our portlets interact with many different databases and other applications that we are passing user login info to, so we would have to change tons of code to strip of the prepended "passport\". Do we have any other option???

One option would be to write a simple PWS that is run after the AWS that sets a user property called, say, "shortlogin". Then you can pass that property to your remote tier and use it in your portlets. Unless you are sending credentials to your portlets via Basic Auth. Are you?

Similar Messages

  • TS1702 I need to remove one unwanted application from my account totally ( iCloud & Ipad). As my ipad will be handled by my kids Ido not want them to see. Please help me to remove my purchase. thanks.

    I need to remove one purchased app from my iCloud and ipad. Needs  solution
    immediately.

    You cannot delete past purchases from your iTunes account. You should delete it from your iPad and then use Restrictions to stop kids from downloading without the pass code. See http://support.apple.com/kb/ht4213
    You can also hide things from your iTunes account by following these steps http://support.apple.com/kb/HT4919

  • How can I remove the " Source.vi" from long Express VI Names?

    I am in the Moment working on the Development of an Express VI
    library for test purposes.
    How can I remove the " Source.vi" from long Express VI Names?
    This happens when the Express VI is inserted in the blockdiagram
    and listed in LabVIEW and TestStand Palettes.
    By short names like "DAQ-Assistent" or "EasyCalc" the string " Source.vi"
    is not shown at the end of the Express VI names.
    I used The Express VI Dev Toolkit 1.0 to create the Express VIs.
    Labview Version: 7.1 Base
    TestStand: 3.1
    It would be great to get the expert advice from the Forum for this issue!
    Thanks a lot.
    Andre

    I think I understand what you are asking for. If I am wrong, please try to explain it a bit more.
    The name shown may be different than the name of the vi file. To do this, your source VI and popup on its icon. From the short menu that comes up, select VI properties. In the top ring, select Window Appearance. The page that comes up lets you set various things that can affect the appearance of the VI. What you want to change is the window title. Uncheck the Same as VI name checkbox and change the string to whatever you want it to be.
    I hope that this helps,
    Bob
    Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
    DISTek Integration, Inc. - NI Alliance Member
    mailto:[email protected]

  • I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

    I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

    Yes, gladly. I am trying to install on a 13" MacBook Pro with OS X 10.8.3. I insert the disk into the SuperDrive. The I work '09 window pops up with two icons: one Tim install and one that says "Read before you install iWork." I double-click on the "Install iWork '09" icon, and a window appears that says, "This package will run a program to determine if the software can be installed." I click "continue" and see "Welcome to the iWork '09 installer." I click on "Continue." The "read me" bullet on the left lights up, and I see "Read before you install. . . ." I click "Continue," then see the software license agreement. When I click on "Continue" again, I am asked to agree, and I do. The window then says, "Standard Install on 'Mackintosh HD" and indicates how much space the program will take.
    I click "Install," enter my password, and the installation begins. It goes through a validating phase and begins "writing files." It indicates that installation will take about 30 minutes (although that number fluctuates). After about four minutes it goes to "cleaning up." Then after just a few seconds, the "Summary" bullet on the left lights up and this message appears: "There were errors with the installation. You may want to try installing again." There is a large yellow triangle with an exclamation point in it, and a bold "The installation failed." Below that appears "The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."
    At that point, a "Close" button is pulsating blue at the bottom of the window.
    Sorry for the tedious detail. Anything revealing there?
    Thanks!

  • BW3.5 : Busness content == Need to find the source cube from an web item

    Hi,
      While executing( preview) an iview  of the predelivered CRM business package( com.sap.pct.crm.slsAnalyt.spa.Customer iview for Sales manager), in Enterprise Portal, I get an error " Error loading template 0TPL_0CRM_SM_CUSTOMER".
      I can see this perticular web template in BW and when trying to activate this by tranferring into the content windows it brought thousands of other objects( even when I selected 'Only necessary object'). I am not sure whether I should go ahead with the activation.
      I would like to know what is the relationship between a cube and a web template and how to findout the related cube from the template?
      Also is it possible to activate only certain webtemplates only for queries of a perticular cube?
      Thanks
    Arunava

    Thanks Dinesh,
    \ BW3.5 : Busness content ==>Need to find the source cube from an web item
    Posted: Nov 2, 2005 10:00 PM        Reply      E-mail this post 
    Thanks Dinesh
    I would still like to know the relationship between a cube and a web template and how to find out the related cube( or query etc) from the template?
    Please let me know,
    Thanks
    Arunava

  • I need to remove a rig/wires from my final cut pro 7 project.  Can Apple Motion 4 remove wires/rig?  Are there any rig removal plugins for final cut pro?   Thanks!

    I need to remove a rig/wires from my final cut pro 7 project.  Can Apple Motion 4 remove them?  If not can anyone recomment any plugins for Final Cut Pro or Motion that can remove them.  Thanks!!

    In Motion 5 there is a plugin from CoreMelt called "SliceX" that does this.  But I don't know anything in Motion 4 that will do it.  You may get more help posting in the appropriate "Final Cut Studio" section of this forum.

  • TS4268 I just traded in my iPhone for a Samsung and I am not recieving messages from other iPhone users. I think I need to remove my phone number from iMessaging but I am not sure how to.

    just traded in my iPhone for a Samsung and I am not recieving messages from other iPhone users. I think I need to remove my phone number from iMessaging but I am not sure how to.

    as http://support.apple.com/kb/ts5185 says to sign out and if not working to contact apple. you can contact apple by phone/chat. number U.S. iPhone technical support:
    (800) MY-IPHONE (800-694-7466)

  • Need to REMOVE Apple ID account from previously owned iMac

    I recently purchased a previously owned iMac and need to REMOVE its previous Apple ID account to remove apps that they obviously purchased. Can this be done? I am being prompted to update these apps and when I try, I am asked to enter this OLD account. I actually want to REMOVE these apps for I have zero interest in them. The system was supposedly wiped of all previous info from previous owner but I guess they over-looked the apps.
    Can someone advise and give me a step by step break down on how to do this? Remember, I have my own Apple ID but the apps were downloaded from a previous Apple ID account that is NOT mine but was on this system.
    Thanks

    And thanks to you, HW.
    I see you got one quick answer.  But you need more.  
    Leave it until your post sinks near the bottom of the list then revive it by writing to your own post ... say, 'can anyone add to these answers?'   It's Sunday morning!

  • HT4865 i need to remove my iphone 5 from my apple account. how to do it?

    I need to remove my iphone from my apple account but when I sign into the account I am only able to edit personal info. Please help!!!

    I'm not sure which you were trying to do, but if you want to unregister it with Apple, you can:
    Go to: https://supportprofile.apple.com/MySupportProfile.do
    Log in with your Apple ID.
    Click on ">" to the right of the phone listing
    Click "unregister"
    If, on the other hand, you are trying to change the Apple ID on the phone, to do this:
    For iMessage, go to Settings>Messages>Send & Receive, tap the ID sign out, sign back in using the other ID.
    For FaceTime, do the same thing in Settings>FaceTime.
    For Purchasing, do this in Settings>iTunes & App Stores.
    For iCloud, you'll have to first save any photos in your my photo stream album that are not in your camera roll or backed up somewhere else or you will lose them.  To do this, open the photo stream album in the thumbnail view, tap Edit, tap all the photos you want to save, tap Share, then tap Save to Camera Roll. You then have to go to Settings>iCloud, tap Delete Account, then sign back in with your updated credentials.  This will delete the account and iCloud data from your phone but not from iCloud.  Provided you are signing back into the same account and not changing to a new account, your data will be synced back to your phone when you sign back in.  However, if you are setting up a new account with a new ID, when you delete the account be sure to choose Keep on My iDevice, and choose Merge when you turn on your data syncing with the new account to upload your data.

  • Remove the OBIEE version from login page

    My client asked me to remove the BIEE number from the login page. Its that possible? How do you go about it, your help is much appreciated. Thanks
    Chris.

    You can also change the css of the logon page, to hide the specific html.
    Re: How to change OBIEE version number in logon screen **** important *****
    Regards,
    Stijn

  • I need to remove my credit card from my account

    Please help me remove my credit card from my account.  I am going to buy my kids Itunes Cards instead.  Thanks, Laura

    On your computer's iTunes you should be able to edit your payment info by going into the Store > View Account menu option and logging into your account, and on your account's details page there should be a payment link.  If you are doing it on an iOS device (iPad, iPhone or iPod Touch) then tap on your id in Settings > iTunes & App Store (Settings > Store on iOS 5 and below) and tap on 'View Apple ID' on the popup and log into your account  - that should also give you a payments link on your account's page.
    Changing payment info : Change or remove your payment information from your iTunes Store account (Apple ID) - Apple Support
    If you don't get the 'none' option on the payment details screen : Why can’t I select None when I edit my Apple ID payment information? - Apple Support

  • I need to remove the hard drive from my old Imac before i recycle. how do I do that?

    How do I remove the hard drive from my old imac befor I recycle it?

    ifixit.com has picture-guides for most anything Mac.  Others say "not a user-capable operation", but ifixit does not hold back the guide for such reasons.

  • Deleting "student" from login name

    How do I delete the word "student" from next to my login name?  I see instructions on changing the avatar (which I did) but I do not know how "student" wound up there.  Anyway, how do I change that?
    This question was solved.
    View Solution.

    Hello jimbo4444,
    The word "student" is part of our ranking structure here on the board and is dependent upon your contributions to the community.  
    For more information please see the following:
    HP Support Forum Ranking Overview 
    Thanks
    SunshineF
    Clicking the "Kudos star" to the left is a great way to say thanks!
    When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
    Rules of Participation

  • Need to remove reverb/slight echo from source audio

    Hello all:
    And yes, yes, before I get the sanctimonious wiseguy quips about "should have recorded it right in the first place/can't get there from here" and other generally unhelpful remarks and platitudes.... "I KNOW ALREADY!"
    So down to the subject at hand. I have to edit source video that was recorded in a very live room. The sound guy did his best to kill the reverb with baffles and sound blankets. etc. but some reverb/slight echo remain. Does anyone know of a software application that can at least smooth it out or advise on how to EQ it so the ring is not so noticeable?
    Many thanks
    AS
    Message was edited by: Adrian Smith4
    Message was edited by: Adrian Smith4

    Thanks for all the responses. I've actually fixed it using a combination of eq and a super sensitive noisegate filter. It was pain to do but got the job done. Phew. < </div>
    I'm trying to figure out a response to this that would equal your original's presupposition but the best I can do is say thanks for offering up a helpful contribution to the "remove reverb" discussions. Future searches will find your thread and maybe you have given them some hope.
    Numerous threads on the same topic often end in frustration because, literally, nothing can be done to reduce echoic reverberation because the overlapping sounds are picked up by a single microphone.
    bogiesan

  • Invoking 'active directory external authentication plug-in'  from login.jsp

    Hi
    I am using the Oracle AS 10g on Unix. We have a web application in JAVA based on OC4J Framework.
    Currently user use application url for accessing the login page, enters credentials and then the authentication is done through LDAP.
    Now we have to remove the login page from application. i.e. once user is successfully logged in Windows on his pc, and tries to access our application through it's url, he must be automatically authenticated using the credentials entered in windows and display the welcome page of application. Same as any intranet application.
    For this requirement, we have 'active directory external authentication plug-in' installed on server.
    What we need to know is how this process will work and changes required in our jsp page to invoke this plug-in and authenticate user by accessing windows-credentials automatically.
    kindly let me know

    Hi
    I am currently using NTLM to fetch the windows username and then creating an anonymous connection with the LDAP Server.
    Then i serach using the user name in ldap directory.
    NTLM is no longer required , instead we have 'active directory external authentication plug-in' installed on LDAP.
    as far as i know the plug-in will process the kerberos ticket generated by windows to automatically authenticate.

Maybe you are looking for