Need to remove carriage returns, spaces, etc.
Hello,
I am trying to build a string that is on one line,
1,2,3,4,5,6,7,8,9
however, I wind up with each number on a separate line.
1,
2,
3,
4,
5,
6,
7,
8,
9
My code looks like this:
var xxx = "";
for (var i=1; i<= nNumWords; i++) {
global.srchVals[i].name = "Payor Mix";
global.srchVals[i].mode = 0;
xxx = i;
if (i < nNumWords) {
xxx = xxx + ",";
//xxx = xxx.replace(/\s+/g,"").trim();
} else {
xxx = xxx;
//xxx = xxx.replace(/\s+/g,"").trim();
var PMItms = [xxx];
//console.println(xxx);
I tried using the following line of code to remove carriage returns and spaces:
xxx = xxx.replace(/\s+/g,"").trim();
But it keeps on giving me the following error:
TypeError: xxx.replace(/\s+/g, "").trim is not a function
Any help is appreciated.
Thanks
Linda
I just want to make sure I'm approaching this problem the correct way.
I am trying to build a string that is on one line,
1,2,3,4,5,6,7,8,9
however, in the debugging console, I wind up with each number on a separate line.
1,
2,
3,
4,
5,
6,
7,
8,
9
Will "Trimming" the string correct the issue?
Thanks
Linda
Similar Messages
-
Remove carriage return between text two objects
How to remove carriage return between objects.
I have a text box and table I want to remove carriage return between them.
Also I have a table with two columns and I want to remove carriage return between these two columns.
Thank You in advance.Hi ,
Try like this ,
--To replace Carriage return
=REPLACE(Fields!Column.Value, CHAR(10), "" )
--To replace Line feed
=REPLACE(Fields!Column.Value, CHAR(13), "" )
--To replace Tab
=REPLACE(Fields!Column.Value, CHAR(9), "" )
And also , ConsumeContainerWhitespace property to remove blank space -
http://beyondrelational.com/modules/2/blogs/115/posts/11153/consumecontainerwhitespace-property-to-remove-blank-space-in-ssrs-2008-report.aspx
sathya - www.allaboutmssql.com ** Mark as answered if my post solved your problem and Vote as helpful if my post was useful **. -
Removing Carriage Returns within a Textarea
Hi,
Just wondering if someone could please let me know how to remove carriage returns from a Textarea after submitting the page?
Within my PL/SQL process, I have used both REPLACE and TRANSLATE on both CHR(10) and CHR(13) but unfortunately it stills comes out the other end as follows:
Description :this
is
a
testWould like it all on one line minus the carriage returns.
Thanks.
Tony.The code I showed works for me. Computations and processes work similarly except that in a process you have to save the value in session state whereas in a computation that's done for you. Show your code or put an example on apex.oracle.com if you can't get it to work and I'll check it.
Scott -
Remove carriage returns from a field in an oracle table
I have a field that is defined as a LONG in my oracle table; the data contained in this field has carriage returns/line feeds (it's free form text); as i'm selecting data from this field, i need the carriage returns removed so that the data from this field all appears on one line.
I tried using the TRANSLATE function to convert the carriage returns to something else, but that doesn't work.
Example:
Select comment from Notes:
COMMENT
the applicant called for an appointment;
an exam was scheduled for 4/1/05 at 9am;
called applicant to confirm app
this needs to be extracted as: "the applicant called for an appointment; an exam was scheduled for 4/1/05 at 9am; called applicant to confirm app"
How can i do this? Can the decode function be used to remove the carriage returns in this field?when i used translate its giving correctly,
SQL> ed
Wrote file afiedt.buf
1 select translate('the applicant called for an appointment;
2 an exam was scheduled for 4/1/05 at 9am;
3 called applicant to confirm app
4 this needs to be extracted as: "the applicant called for an appointment; an exam was scheduled
5 How can i do this? Can the decode function be used to remove the carriage returns in this field
6* ',' ') from dual
SQL> /
TRANSLATE('THEAPPLICANTCALLEDFORANAPPOINTMENT;ANEXAMWASSCHEDULEDFOR4/1/05AT9AM;CALLEDAPPLICANTTOCONF
the applicant called for an appointment; an exam was scheduled for 4/1/05 at 9am; called applicant t
SQL> ed
Wrote file afiedt.buf
1 select 'the applicant called for an appointment;
2 an exam was scheduled for 4/1/05 at 9am;
3 called applicant to confirm app
4 this needs to be extracted as: "the applicant called for an appointment; an exam was scheduled
5* How can i do this? Can the decode function be used to remove the carriage returns in this field
SQL> /
'THEAPPLICANTCALLEDFORANAPPOINTMENT;ANEXAMWASSCHEDULEDFOR4/1/05AT9AM;CALLEDAPPLICANTTOCONFIRMAPPTHIS
the applicant called for an appointment;
an exam was scheduled for 4/1/05 at 9am;
called applicant to confirm app
this needs to be extracted as: "the applicant called for an appointment; an exam was scheduled for 4
How can i do this? Can the decode function be used to remove the carriage returns in this field?
SQL> -
How to remove carriage returns in message mapping
Hi Experts,
I am getting carriage returns in one of the source field, i need to remove those carriage returns and i need to pass it to target field, can anyone suggest me how can i achieve this.Hello,
Are you getting only CR or CR+LF (line feed) ?
In this case - CRLF - you can use content conversion in your sender adapter:
<recordset_structure>.fieldSeparator = 'nl'
So in your receiver adapter you can replace any special char by 'nl' again.
Check these links.
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
http://help.sap.com/saphelp_nwpi711/helpdata/en/44/686e687f2a6d12e10000000a1553f6/content.htm
Regards,
Diego Estanguini Gabriel -
Remove Carriage Return from a TextEdit field
Hi All,
I have a tableview, of which the last field Description, is of type TextEdit. Not only this, when the data was migrated from a legacy system to SAP, either the last field with the value (If Description has value, Description field, else the field before Description) has 2 '##' at the end of it.
The 2nd # is EQ to
cl_abap_char_utilities=>newline
, which I can remove using
REPLACE ALL OCCURRENCES OF cl_abap_char_utilities=>newline IN <fs> WITH ''.
But the first # is having the Hex Value 0D00, which is EQ to Carriage Return. CR_LF is Carraige Return and Line Feed, but here, I need to remove only CR.
Can anyone give me the right solution?
I tried moving this data to a string field and then do a REPLACE All... IN BYTE MODE, but again, it didn't work.
Thanks and Regards
Gladson JacobHi Patrick,
The program's ending with a Short Dump. The code snippet is as below.
DATA: it_contract TYPE TABLE OF zbpa_bp_contract,
xstring_val TYPE x VALUE '0D00',
value2 TYPE x VALUE '2000',
string_value TYPE string,
xstring_value TYPE xstring,
stringtable TYPE TABLE OF string,
reply_value TYPE TABLE OF tline.
FIELD-SYMBOLS <fs> TYPE zbpa_bp_contract.
SELECT * FROM zbpa_bp_contract
INTO TABLE it_contract.
* WHERE id BETWEEN 2316 AND 2328.
LOOP AT it_contract ASSIGNING <fs>.
string_value = <fs>.
APPEND string_value TO stringtable.
CALL FUNCTION 'CONVERT_STREAM_TO_ITF_TEXT'
TABLES
text_stream = stringtable
itf_text = reply_value.
ENDLOOP.
The dump description is as follows
Error analysis
At the statment "DESCRIBE" only character-type data objects are supported at the argument position "TEXT_STREAM", but no strings are supported (data types STRING and XSTRING).
In this particular case, the operand "TEXT_STREAM" has the type "g".
<b>Please help.</b>
Thanks in advance.
Gladson
Message was edited by:
Gladson Jacob
Message was edited by:
Gladson Jacob -
How do we remove Carriage Return (line feed) inserted in FCC files
Hi Experts,
The file that we generate has a carriage return at the end.
Is there any way in which we can remove this carriage return (line feed) from the file?
The FCC parameters used at our end are as below:
structure.filedNames:
structure.fieldFixedLengths:
structure.fixedLengthTooShortHandling: Cut
Kindly tell us a solution ASAP.
Thanks & Regards
DhwaniDear All,
Let me elaborate on my query
Consider that the files output looks like below:
12 34 45 545 5454 UL
23 33 43 434 4545 FG
45 44 44 586 6535 GM
Now there is an extra line(Carriage Return) getting inserted after the last line 45 44 44 586 6535 GM which is not required at our end.
The cursor of the file instead of stopping on the last character M, points to the next line.
Can you please suggest how to remove this extra line from the files.
I dont understan how will remove context help in this case.
Regards
Dhwani -
XI: Remove Carriage Return +Line Feed at end of XML
Hi All,
Scenario
Currently, we have a JMS --> XI --> IDOC scenario. The Sender Service always sends a CRLF (Carriage Return & Line Feed+) without fail at the end of each xml file once this non-sap system finishes its transaction.
Example
<STARTOFXML>
Data------
</ENDOFXML>CR+LF
Question
Is it possible to remove this from XI JMS Sender Adapter? From the receiver Service (JMS) this is possible.
Cheers!
SulaimanWhy do you want to remove this? Does this lead to errors?
Regards
Stefan -
Remove Carriage Return between elements
Hi All,
Below is my xml document:
<Message>
<AccNo>100</AccNo>
</Message>
I want to convert the above document as:
<Message><AccNo>100</AccNo></Message>
I mean, without carriage return in between elements. The above two documents are generaring a different message signature. Please help me; as how can remove carrige returns in between elements.You're talking about line breaks between elements; are there any line breaks inside elements? If there are, you probably want to preserve them, but for now I'll assume all line breaks must go.
What form is the XML document in? If it's a string, you can do a simple replaceAll(): str = str.replaceAll("[\r\n]+", ""); If it's in a file, you can read it in line-by-line with a BufferedReader and write it to a new file without inserting line breaks. -
HTML Textarea removing Carriage Returns
Hi,
Hoping someone can assist, I am retrieving some data from a table that currently consists of carriage returns but when I try and retrieve this information via Ajax and pass it back into the HTML page textarea field within ApEx, the value returned is one continuous string.
All my carriage returns are removed.
Can someone please assist, possibly using a javascript solution or some other type as to how I can preserve the carriage returns.
Thanks.
Tony.Hi Tony,
I suspect the problem is simply due to the way HTML handles line breaks, which is to say, it generally ignores them. For example, this html:
<p>To be or not to be, that is the question;
Whether 'tis nobler in the mind to suffer
The slings and arrows of outrageous fortune,
Or to take arms against a sea of troubles,
And by opposing, end them. To die, to sleep;
No more; </p>would be displayed in a browser as:
To be or not to be, that is the question; Whether 'tis nobler in the mind to suffer The slings and arrows of outrageous fortune, Or to take arms against a sea of troubles, And by opposing, end them. To die, to sleep; No more;
One way to get around this is to wrap the string in {font:Courier}<pre></pre>{font} tags; another would be to replace the carriage returns with {font:Courier}<br>{font}
Hope this helps.
tx, --Jen -
Remove Carriage return from string
I have a free text area on a BSP (a form). When users type continuously in this area the text gets wraped. When the BSP is submitted it generates a sapscript form and the text area is printed on the form, but it has '##' which are placed where the text wrapped round. I would like to remove '##', so tried the following:
replace all occurrences of '##' in text_area with ' '.
This did not work as the '##' are not recognised presumably because they are some type of carriage return and not in fact has marks.If you dont have access to the class CL_ABAP_CHAR_UTILITIES, do this instead:
DATA: crlf(2) TYPE x VALUE '0D0A',
itab TYPE TABLE OF string,
w_input TYPE string.
w_input = '<contains the text with the line feed.>'.
SPLIT w_input AT crlf INTO TABLE itab.
Regards Michael. -
I have a table with a field that contains data such as this,
and I want to remove all of the carriage returns but I am having
difficultiy. I have tried replacing the chr(13) and the chr(10) but
no such luck. Can anyone help? Thanks!
==== start of code block ====
Part Number: 1307 G9<BR>
Finish Family:
CHROMES<BR>
Finish/Color:
STERLING NICKEL<BR>
Dimensions:
1 1/4 INCH DIAMETER<BR>
Collection:
BRASS & STERLING TRADITIONS<BR>
==== end of code block====Hi,
For me both database as well as coldfusion worked fine. You
may also please try with small example.
Method 1:
At database side
select
replace(columnname,chr(13)||chr(10),' ') as columnname
from <tablename>
Method 2: Coldfusion
<cfset pageContent = reReplace(pageContent,
chr(10)&chr(13),"", "all" )>
I noticed that the regular expression functions in CF support
the newline character \n Chr(10), carriage return \r Chr(13), and
tab \t Chr(9).
<cfsavecontent variable="data">
here is my
break
</cfsavecontent>
<cfoutput>#ReReplace(data, "\n", "<br />",
"ALL")#</cfoutput>
Method 3: Coldfusion.
Please go through the below article. Example is mentioned
http://livedocs.macromedia.com/coldfusion/6/CFML_Reference/functions-pt248.htm
Hope this helps. Please try it out.
Satheesh. -
Solaris10.. need to remove "::1 localhost" from /etc/hosts file
I know i have IPV6 disabled (through install options) but i still see "::1 localhost" entry in the /etc/hosts file.. This is related to localhost with IPV6 address ::1.. why it is still there.. what is it's impact.. how can i remove it if i decide to remove..
Thanks, appreciate help.
S.It could be there if you linked /etc/hosts (or /etc/inet/hosts to /etc/inet/ipnodes). Or recreated the hosts-file from ipnodes (or it could be there by default and removed by my jumpstart, which means i would be unaware of it :-)
And no, you don't need it if you are not running IPv6, in fact removing it will eliminate a few error messages.
On all non-IPv6 systems i install i link /etc/inet/ipnodes to /etc/inet/hosts, in order to eliminate errors when changing IP addresses of the host and odd resolv-conflicts (which also removes any reference to ::1), and so far i have never experienced any issue with that.
.7/M. x2000 :) -
Need help on carriage return / line feed...
Hi,
I have a variable defined for a new line, e.g. <CFSET
NewLine = "#chr(13)##chr(10)#">, that I use as a break between
lines of text within CFMAIL.
<CFSET Message = NewLine & "Product Name: " &
Trim(GetProduct.ProductName) & NewLine>
<CFSET Message = Message & "Product Description: "
& Trim(GetProduct.ProductDesc) & NewLine>
<CFSET Message = Message & "Product Color: " &
Trim(GetProduct.ProductColor) & NewLine>
<CFMAIL FROM="[email protected]"
TO="[email protected]" SUBJECT="Product
Info">#Message#</CFMAIL>
If the email is sent to and open up in Microsoft Outlook
account (mailbox), the "Product Description" line of text would
stay on the same line as the Product Name (when
LEN(GetProduct.ProductName) > 50). In other words, the NewLine
variable is not doing the break. The code works with yahoo or
hotmail account though.
Any advice is greatly appreciated.
Thanks in advance!The trick is to add 3 blank spaces (" " ) at the end of each
line but before the break (NewLine) such as these:
<CFSET NewLine = "#chr(13)##chr(10)#">
<CFSET Message = NewLine & "Product Name: " &
Trim(GetProduct.ProductName) & " " & NewLine>
<CFSET Message = Message & "Product Description: "
& Trim(GetProduct.ProductDesc) & " " & NewLine>
<CFSET Message = Message & "Product Color: " &
Trim(GetProduct.ProductColor) & NewLine>
<CFMAIL FROM="[email protected]"
TO="[email protected]" SUBJECT="Product
Info">#Message#</CFMAIL> -
Need to remove space for a field when displayed in ALV Report
Hi,
I have material field of length 18, but the content is only 10 char. I need to remove the extra space when it is displayed on ALV Report.
Is there any option in ALV field catalogueuse statement condense.
condense zmatnr.
also giv output lenth of alv column as 10.
Maybe you are looking for
-
Standard Report for stock Aging
Hello all, can anyone plz let us know that is there any standard report in SAP for stock aging? actually i have to see the materials quantity whose 311 movement not done after 321 and also from how many days it is pending. Kindly help and tell how ca
-
I have a 2009 vintage MacBook Air. Ever since I installed maverik the speed to do anything has decreased significantly. After the 30 minutes of use it gets better, but still intemitently takes a time out for for a minute or more. Any solution othe
-
Documents in the Accounts Receivable module by the TRM
Hi Guys, good afternoon... Currently in the company, we have contracts for loans to customer, but all documents postings are made through accounting counts or bank (incoming or outgoing). We need to create these documents in the customer, I mean, is
-
Missing features and bugs in 2.2 update...
Missing features and bugs in 2.2 update... Here is my shortlist: 1. Copy/Cut and paste - sadly still missing... 2. Landscape view for keyboard - SMS and Email - still missing...! 3. AM/PM indicator missing from "unlock" screen (in 12 hour clock) - BU
-
How to place item on canvas when generating form?
Dear All I'm using oracle designer 10g. I have a template form called"tmplt.fmb" The template contains a block named "Bean_block" and one bean item I need to place the bean item on cg$page_1. canvas cg$page_1 is not on my template, It is generated by