Need to remove constant humming sound

Hello all,
I am working on video clips for school and the room was quiet that I was in and played back ok on the camera, but after getting them into FCE 4 there is a loud humming noise. I have attempted using various audio filters and am a beginner with that. All I have had practice with is changing audio levels, etc.
Any tips?? Any comments welcome. Thanks.

Hi
If it's OK in Camera - Cheque Cables (test other) - Keep Camera on Mains or try all Battery
and see if this helps.
The problem is best handled in Camera / Mac connection - not afterwards with eg filters
will never be as good.
If everything fails - I would Use a program "SoundSoap™" That handles noice as
good as I know of.
Yours Bengt W

Similar Messages

  • A constant varying humming sound

    The computer constantly makes an audible humming sound that varies pitch constantly which is very annoying. When the computer was still under warranty, I called Toshiba technical support about the sound and they said that it was normal. At work I have a similar all-in-one HP computer and it does not make that sound. The computer works well otherwise. But this never-ending, constantly changing sound is extremely annoying. I don't know what to do with this computer. Years ago I purchased a Toshiba laptop that was a fine product. But with this computer, I am very unhappy.

    Sounds like it may be coming from the hard drive, it is under and to the right of the touchpad. SEE PICTURE
    S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****
    Attachments:
    855 with areas.png ‏1138 KB

  • Inspire GD580 Low Humming Sound in each speaker

    I'm experiencing a strange problem, my system has worked fine for several months now, but recently I've been hearing this humming sound that fails to grow on me. In the past a temporary humming sound would come in and go, kind of like interference. But this sound is presistant and annoying.
    If anyone knows why I could be receiving this kind of interference, it would be of great help, I have an Audigy II ZS if thats of need.
    Thanks in Advance-
    Mark

    I finally fixed it! I found out that my wireless DECT telephone had a power cable that was unshielded, so I unplugged it and now the constant buzzing noise is gone!!! So happy to fix it..

  • I need to remove an AOL email account that is not attached to my Apple ID.  This is on an iPAD.  It is not showing in Accounts.  However, I cannot delete the mailbox,. Please advise

    I need to remove an AOL email account that is not attached to my Apple ID.
    I am receiving email and I cannot delete the mailbox. Please advise.
    the account is not viewable in settings.

    I am assuming that this mail is coming into the Mail App, not another third party app, correct?
    Is the AOL account showing up as its own mailbox in the mail app? (e.g. I see "All inboxes", "iCloud", and a third mailbox that is my second email address.)
    Every "mailbox" except the "all inboxes" are going to be in the settings under mail, Contacts and calendars.
    If the mail is coming into a mailbox that isnt the AOL mailbox, then it sounds like you have your AOL mail being forwarded to another email adress.

  • TS4036 i need to remove my ios7 for my iphone 5 to be repaired how do i do this?

    my iphone hasbeen sent off to be repaired but they cant do this without me removing my ios7 from icloud how do i do this??

    Hey lisamaria1000,
    Thanks for the question. It sounds like you need to remove the phone from Find my iPhone (Activation Lock). To do so, follow these steps:
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account
    http://support.apple.com/kb/TS4515
    Make sure the device is powered on and connected to a Wi-Fi or cellular network. Then contact the previous owner and ask them to follow these steps:
    1. Sign in to their iCloud account at www.icloud.com/find.
    2. Select the device from their Find My iPhone device list by clicking All Devices at the top of the screen.
    3. Erase the device by clicking the Erase button. This will erase all content and settings from the device. When prompted, do not enter a phone number or message. Click Next until the device is erased.
    4. When the erase is complete, click "Remove from Account" to remove the device from the account.
    After the device has been erased and removed from the account, you can proceed with the device setup process.
    Note: These directions may sound out of context for your situation, but don't worry, it's definitely what will fix the issue.
    Thanks,
    Matt M.

  • How do i get the humming sound off my.phone

    Everytime i make a call i have this humming sound how do i get rid of it

        rjw805,
    We're here to help! We definitely want to resolve your concerns; some of my app alerts can be annoying to me. We need a bit more clarification. Are you referring to data alerts and allowance available until next bill cycle? Or is this regarding Prepaid service?
    AdaS_VZW
    Follow us on Twitter at @VZWSupport 

  • How to remove constant asignemnt from 0FUNCT_LOC info object

    Hi,
    I am trying to remove constant assignment for the 0FUNCT_LOC info object but that option is greyd out. Could you please advise me how i can take out the assignment. It's in development.
    Thanks,
    Naveen

    how come that you have a hierarchy created on this IObj having a constant ?!?
    did you really empty its master data? and SID table? check in the tables if this is really the case.
    If you still have a hierachy (not empty), most likely you still have at least one entry in the SID table (/BI0/SFUNCT_LOC)
    try deleting the hierarchy and ensure the /BI0/P and /BI0/S table are really empty.
    then try to apply your change in RSD1.
    If this still doesn't work please revert but I am still believing that you'll need to empty the datatargets as well; to answer your question: datatargets like cubes/ods won't have their data deleted...
    hope this helps...
    Olivier.

  • Humming sound from bottom of laptop

    dv6 laptop making continuous humming sound;  I cleaned the vents with compressed  air.  sound persists

    I would put my ear right against the area under the plastic that has the image for hard drive (usually looks like a cylinder split into cylinders). Listen and see if you can feel it.  Next, put your ear near the fan exhaust and also the intake if you can find the holes for that.  The intake is usually on the bottom near the exhaust port.  The spacing should be large enough to give you an idea.  The other method is to remove the hard drive and see if the noise is still there.  Make sure you didn't just leave a DVD in the drive.
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

  • Dropped iPhone on floor and now when I make outgoing calls I hear a constant buzzing sound, when i turn on speaker it goes away, turn speaker off and the buzzing returns.

    I dropped my iPhone 4 on floor and now when I make outgoin calls I hear constant buzzing sound, when I activate speakerphone it goes away only to return once the speakerphone is deactivated.  Help!!!

    Sounds like you need to take it in for repair.

  • IOS 7 has remove the unlock sound for the apple devices? Is it possible to set it back?

    iOS 7 has remove the unlock sound for the apple devices? Is it possible to set it back?

    ATV cannot play movies from the TC, even if it is on your home network.. ATV is a streamer.. it is not a media player.. and the TC is a dumb as a board hard disk in a router.. so it has nothing in it either.
    You cannot play movies from ATV without itunes, which streams to the ATV.
    If the iMac is running 24/7 then you should be able to connect to the iMac remotely and run from iTunes on that, which could then play movies stored on the TC.. with the following issues.. if you use wireless on the iMac forget it. The iMac has to be ethernet connected as it has to pick up the movie on the library and play it back to the TC to network to your home.
    The next issues is speed of slowest connection.
    Your download to your home maybe great.. what is the upload speed from your office like??
    If you pay for uploads and downloads you will pay for the movie 3x.. first to download it.. second to upload it.. office to net..  and third to download it again.. net to home..  Sorry but it is better to play the movie directly from online itunes store.
    If you plan to try and play non-itunes movies over the connection, it won't work.. ATV as stated is linked to itunes and cannot play movie files.
    Overall this sounds like you need to think it out a bit more.

  • My ATV has a constant strange sound and is very warm

    Has anyone experienced that the ATV sounds like it is working constantly with a rather high humming sound? It is also very warm, but has always been I think. Even if I turn it off by pressing the Play button it still sounds that noice.
    Would it help to rstore it to factory setting or any other suggestion?
    Jesper

    The top of the ATV is reportedly designed to act as a heat sink and it gets quite hot, that's normal. The humming noise is unusual and could indicate a hardware problem, like a bad component in the power supply or possibly the hard drive. It should be quiet, so I'd suggest taking it to an Apple Store or calling AppleCare, you may need to have it replaced.

  • Satellite X200-191 = Laptop turns on 4 seconds, black screen,humming sound

    _*Satellite x200-191*_
    Core2 Duo T7700
    *Original:* 1024MB + 1024MB Memory 667MHZ / 512MB VRAM *Replaced:* Kingston Kingston KVR667D2S5/2G (I have this 2x)
    *Original:* 200GB + 200GB Harddisk Drive (4200RPM) SATA *Replaced:* Only 1 HDD left, other one I will get back in 2 days.
    17 WSXGA+ TRUBRITE TFT Screen
    HD DVD-ROM Drive
    56K Modem / Lan
    W-Lan (802.11 A/G/N)
    1/3MPixel Web Camera
    Bluetooth
    Microsoft Vista Home Premium 32 Bit
    _*My Problem:*_
    I take out the battery, plug it in the power. Charging light turns on.
    I press the power button, power led turns on. Followed by the hdd led turn on, which blinks real quick, stays on for 1 second, then turns of. The power led stays on during all the time.
    2 seconds after the power button, a fan starts blowing, while the above mention hdd led blinks for 1 second, 2 seconds after the fan starting to blow, it turns off.
    We are now 4 seconds farther, pretty much, everything stopts, except a very tiny minor humming sound. (I just left it on for a couple minutes, sound remains, nothing happens.) (While writing this all I left it on for 10 minutes, the laptop heats op a bit, the adapter gets hotter, but still only the very tiny minor humming sound.)
    +So my laptop works for 4 seconds, wont give any screen (black screen) wont load even BIOS. What could be wrong ?+
    _*Fixing?:*_
    Ok so I left the laptop after a couple of months, being told it was dead, just getting it dusty. (Read history to get this)
    But since last week, I figured its getting dusty, I never opened a laptop before, why wont I try doing that.
    _+*I replaced the Memory modules, Slot A and B , both memories , same time, one at a time, all possible ways.*+_
    _+*Since I have only 1 HDD, I used it in both slots. Looks to no difference. Using NO HDD, I do NOT have the very tiny minor humming sound!!!*+_
    I followed a guide [http://www.irisvista.com/tech/] to open my laptop, to see what is inside.
    Finding no lose plugs, but did find a certein oil, and some white paste.
    Closing the laptop, to try it out, I accidently screwed a couple wrong screws in the laptop, piercing the top cover of my laptop, but no chips were hit during this :P (Yeah, Im a bit to strong, I should have figured using force for a couple of the screws wasnt the best thing I could do, but now i know :p)
    *SOOO* My question, while I wait for the extra old HDD (getting it in 2 days). (Probably making no difference)
    What could be wrong, more precisly. Should I like try taking out the video card or something ?
    Is there something I should do with some soldering?
    Any tips/tricks that could work, wether to fix the laptop, or to narrow down the problem , to a small part which i could replace ?
    BEST REGARDS
    Danny Visser
    The Netherlands
    _*History:*_
    Not sure if this is any important, but just to let you know, if intrested what happend all to the laptop ;)
    I bought the laptop at Shape Computers (in the netherlands) Asking this laptop mentioned above, with 2 things changed. I wanted more Memory, and I wanted windows XP. The shop told me this was possible. They bought me the laptop in, they replaced the Memory with the kingston memories. They installed windows XP instead of the Vista. They laptop did work at this very moment. So I bought the working laptop, with 1 year warranty.
    With the folders extra given with the laptop, I was able to increase my warranty from 1 to 2 years for free, so I did.
    After probably a couple of weeks I noticed that the laptop was getting real hot, after longer usage. But according to the manual this was normal.
    I did use the laptop for gaming, but also 2 months for a gaming study. So I did take it several times to school in a backpack.
    After not using it for school anymore I reinstalled Windows Vista 32 BIT
    At a very point not sure when precisly I noticed that it wouldnt turn on (probably same problem as I have now) but I was really relaxed about it, tried it later, and somehow it did work again. This happend perhaps about 5 times in total.
    Knowing something was wrong, I took it back to Shape Computers. They checked it. (Not showing me what they did to it) But they told me I had nothing to worry about.
    After about 2 years I actually sold this laptop to my mom. She used it a couple times (she is like realy noob, just about computers in generally, not even knowing if she should double click icons or not) She took it with her a couple times on trips, and they after about 2 years and 2 months ... this problem happend.
    My mom knows a guy, and a friend of that guy, works alot with broken laptops, which told me that the problem was the _+motherboard+_.
    I decided to take it back to the shop. After a long progress being down there (about 6 to 8 weeks)(Me going to the shop like 15 times). The shop managed to tell me it was the motherboard. That the motherboard couldnt be fixed and that a new one would be way to expensive.
    +(I Known at this very point, after getting the motherboard back, that this laptop was not screwed open yet. The screws were still brand new.)+
    Funny information(not for me), during this period of about 8 weeks, they actually told me lies like ... I left a message at your voicemail, I DONT HAVE A VOICEMAIL ... sorry for the caps but im still xxxxxx about those lies.
    So still believing the shop ... my laptop is gone .... dead ... but then since last week, I started looking into the laptop myself ...(Fixing)

    Ok, the company did not reply at all ... I ended up sending another email. And they did reply with a automatic message. Now weeks later still nothing more then that auto reply.
    While I was waiting I contacted another guy that knows alot from these laptops. Getting a new part would cost me about 300 euros, and thats just the part, not even replace time.
    Considering the toshiba help I have gotten ... (pretty much none) in these last years.
    I declare my laptop dead. And decide at this very moment, that I (ofcourse) never will buy toshiba hardware again.
    I might pay a bit more at my Dell computers, but the support in the last 8 years with 5 different computer systems and 1 laptop. Has been perfect in compare to the toshiba support I have gotten in the last 3 years, which just fails.
    Thx tho all you guys for the replys.
    Danny Visser

  • I will give my laptop to someone else, how do I unlink my apple id? Do I need to remove the apps I downloaded with my id?

    I will give my laptop to someone else, how do I unlink my apple id? Is it just the app store unlink? Do I need to remove the apps I downloaded with my id? Will they get removed when I unlink my apple id?
    Are there any other procedures I need to take into account?
    Thanks

    You need to remove all software that you acquired from the Mac App Store, including newer versions of OS X. These are all registered to you and encoded with your Apple ID in the licensed copy. You cannot legally pass any of the software to the new owner, which is why Apple states to erase the Mac and return it to the version of OS X that shipped from the factory on the Mac. You must also remove any older Apple software that you installed by DVD or pass the DVD to the new owner with the Mac.

  • What cables do I need to connect my 2013 macbook pro to my HD tv? I know I need mini display to HDMI, but male? female HDMI??? and also, do I need a separate cable for sound?

    what cables do I need to connect my 2013 macbook pro to my HD tv? I know I need mini display to HDMI, but male? female HDMI??? and also, do I need a separate cable for sound?

    Actually you need a Thunderbolt to HDMI adapter. It will carry both audio and video.
    This one will work: Mini DisplayPort | Thunderbolt® to HDMI® Adapter w/ Audio Support

  • Need to remove space for a field when displayed in ALV Report

    Hi,
    I have material field of length 18, but the content is only 10 char. I need to remove the extra space when it is displayed on ALV Report.
    Is there any option in ALV field catalogue

    use statement condense.
    condense zmatnr.
    also giv output lenth of alv column as 10.

Maybe you are looking for