Need to remove crop lines set in custom function 3

Hello All, I need help! I set the custom function 3 to the on position, thinking it would just give me lines to show where an 8x10 crop would be ~ I did not realize that it would actually crop all of my images. I shoot raw and I have imported them into lightroom, within lightroom I cannot remove the crop. I tried opening in Canon's software, removed the crop, then saved as a TIFF, but 17 files ended up being corrupt.
I see that there is a plug in for LR, but it indicates DNG files, not RAW ~ is there a plug in for RAW? Does anyone know a work around that might help me? Thank you.

This forum is for discussing Lightroom plugins. You're more likely to get an answer if you repost in the main Lightroom forum.

Similar Messages

Help - I need to remove crop marks set in custom function 3

Hello All, I need help! I set the custom function 3 to the on position, thinking it would just give me lines to show where an 8x10 crop would be ~ I did not realize that it would actually crop all of my images. I shoot raw and I have imported them into lightroom, within lightroom I cannot remove the crop. I tried opening in Canon's software, removed the crop, then saved as a TIFF, but 17 files ended up being corrupt.
I see that there is a plug in for LR, but it indicates DNG files, not RAW ~ is there a plug in for RAW? Does anyone know a work around that might help me? Thank you.

You didn't say which Camera you are using except it is a Canon but use this Plugin and see if it works. It outputs DNG files and does NOT change your original CR2 so you will have to use the DNG in Lightroom to see the full image.
Plug-ins for Adobe Photoshop Lightroom | Adobe Labs

Need help in inserting line details in custom table in oaf

Dear All,
I have a requirement as below.
I have a page having few LOVS and few text fields and below to that i have a table region that i am populataing from another page means i have a button to open another page from that i am passing selected rows to base page, so my base page structure looks like below:
LOV1        TEXTFIELD1
LOV2        TEXTFIELD2 .......SO ON
LINE DETAILS
LINENUM ITEM ITEM DESC
1             AAAA           TEST
SO my requirement is i have a button in my base page after clicking thsi the header information should insert to a table and line information should insert into another table,
Header information i am able to insert into table by EO based VO, but how i can insert the line data from the table region to another custom table, please help me out on ths.
Thanks

Hello Everyone!
DataObject fileUploadData = (DataObject)pageContext.getNamedDataObject("UploadFile");
String fileName = null;
String contentType="";
try {
fileName = (String)fileUploadData.selectValue(null, "UPLOAD_FILE_NAME");
System.out.println("File Name : "+fileName);
} catch(NullPointerException ex)
throw new OAException("Please Select a File to Upload", OAException.ERROR);
contentType = (String)fileUploadData.selectValue(null, "UPLOAD_FILE_MIME_TYPE");
System.out.println("contentType : "+contentType);
System.out.println("Creating object uploadedByteStream for file name : "+fileName);
BlobDomain uploadedByteStream = (BlobDomain)fileUploadData.selectValue(null, fileName);
I was using the above code to load the MS Excel 2010 .xlsx file, but when i checked uploadedByteStream is returning null value.
Could anyone let me know why is this happening because i found in my post on google the same way (Above mentioned) code has been written for loading the .xlsx file?
Thanks & Advanced,
CAK

Need Help: How to configure/set-up custom interchange code values in B2B

Hello All,
Hope everybody is doing well.
We are currently facing a problem in implementing Inbound 850 Purchase Orders in B2B from one of our Trading Partners (Customer).
The Customer will be sending us EDI ANSI X12 ver 4010 Purchase Order files, but in the file they are sending a custom GS08 (8th element of GS Segment having Version/Release/Industry Identifier Code) value i.e. "004010RIFMAT".
The above value is not present in the Standard Code values when we define an ECS using B2B Document Editor.
Hence the document is failing in B2B since it is not able to identify the Trading Partner.
If anyone has faced similar issues, I would appreciate if you could let me know on how to configure the same in B2B. Please let me know the steps in detail.
Thanks In Advance.
Regards,
Dibya

Hello Dibya,
Can you create a new group ecs with appropriate codelist for GS08 and use it while modelling B2B flow. Make sure to undeploy and validate the agreement.
Rgds,Ramesh.

How do i remove a line from my family plan?

I need to remove a line from my family plan, how do i do it on the computer?

You can't cancel service on-line; you'll need to either call Customer Service or visit your local Corporate Verizon store.

Remove black lines from a tiff image in Photoshop.

Hi,
I am developing an automation plugin in Ps. I have images which contains text, border and vertical lines. I need to remove the lines and border from the image. The problem is that the color of text,line and border are same ie. black.
I tried reading pixel by pixel but couldn't differentiate between the lines and text as both are of same color.
Can anyone suggest some other way to achive this?
Thanks in advance.

Just to clarify the situation for us. You want to remove the black frame and the vertical lines while leaving the black rectangle and the text intact in the image? Is this correct?
You also mentioned you are attempting to create an "automation plug-in for Photoshop"
You say you have other images, I'm assuming they are different for the one you posted but you want the "plug-in" to delete the black frame & vertical lines from a number of different images?
Will the black rectangle always be in the same exact position and will the image dimensions for all the images always be the same?
As Noel said, you should go to the Photoshop SDK forum. Explain to them what you want to do and that you want to do this on many different images.
As an afterthought, a Plug-in is different from a Photoshop Action. Perhaps this could be partially done with an Action that allows for a pause to select or change something before continuing the action.
And no, I don't create Actions myself so I can't help. Do some reading and see what you can come up with.

Testing custom function modules

Hi Friends ....
As I am new to ABAP testing , I need help in knowing how to test custom function modules .
Below is how I am trying :
Step : 1 -- > Open Tcode SE37
Step : 2 --> Display the function module
   Step : 3 --> Do its syntax check.....activate it..... execute it
   What if no test data is available???
I am trying to execute directly where it gives a return parameter for some function modules saying No Entry \ No data available for this ID etc.,
I am in a confusion whether its correct or not
I want some ideas regarding this
                             - Swapna

>
Swapna Vadlamani wrote:
> Hi Anupama...
>
>   Thank u a ton for the quick reply...but I have another doubt..if I execute without giving any selection parameter data...it says
>
>   No data stored for in the selected period
>
>                                 -Swapna
Ok, so that is what it does if you don't pass it any selection parameter data - I doubt very much if that is how it will be used in Production. Any function module is just a bit of code that does what it has been programmed to do; to test it you just need to find out what it is supposed to do from whoever has asked for it to be built and then check that it does it. If there is no test data set up, then you'll need to find out from your functional consultant how to set some up or get them to set it up for you.

Divider lines in SALV Tree, need to remove?

Hi,
I am using SALV Tree . I am seeing divider lines between ICONs in the Tree toolbar. I need to avoid these divider lines?
Why? becuase it is utilizing lot of spaces. so that other ICONs gone into hide mode, for users view these icons they need to click left arrow button to scroll.
a®s.

Hi
Solved by myself.
Here is the correction code
* Tree Calls
try.
      call method cl_salv_tree=>factory
        exporting
          r_container = g_docking_container_1
        importing
          r_salv_tree = grt_tree
        changing
          t_table     = i_yatttic.
    catch cx_salv_no_new_data_allowed cx_salv_error.
      exit.
endtry.
* try.           " By removing this custom function now ICONS displayed properly
*      v_text1 = text-b01.
*      v_text2 = text-b02.
*      grt_functions->add_function(
*        name     = 'MYFUNCTION'
*        icon     = '@42@'
*        tooltip = v_text2
*        position = if_salv_c_function_position=>right_of_salv_functions
*    catch cx_salv_wrong_call cx_salv_existing.
* endtry.
perform f_build_tree_header.
perform f_build_tree_info.
perform f_build_tree_events.
grt_tree->display( ).
* Column Calls
gs_layout-grid_title = text-101.
try.
      call method cl_salv_table=>factory
        exporting
          r_container = g_docking_container_2
        importing
          r_salv_table = gr_table
        changing
          t_table      = i_ylactc1.
    catch cx_salv_msg.
endtry.
try.
      gr_column ?= gr_columns->get_column( text-103 ).
      gr_column->set_cell_type( if_salv_c_cell_type=>hotspot ).
    catch cx_salv_not_found.
endtry.
gr_sorts = gr_table->get_sorts( ).
gr_sorts->add_sort( columnname = text-103 subtotal = abap_false ).
gr_layout = gr_table->get_layout( ).
key-report = sy-repid.
gr_layout->set_key( key ).
gr_layout->set_save_restriction( cl_salv_layout=>restrict_none ).
perform f_build_column_events.
gr_table->display( ).

I am using Firefox 3.5.9 in Linux Gnome and need to remove the "Set As Desktop Background" from the right click menu or at least disable the users ability to change it from Firefox as I am running a kiosk.

USeing Suse Linux Enterprise Desktop 11SP1 with gnome desktop and Firefox 3.5.9. I have created a firefox user profile and need to remove or restrict the ablitiy of the users to change the desktop background.

See http://kb.mozillazine.org/Chrome_element_names_and_IDs
Add the code to [http://kb.mozillazine.org/UserChrome.css userChrome.css] below the @namespace line.
<pre><nowiki>#context-setDesktopBackground {display:none!important;}
</nowiki></pre>
See also http://kb.mozillazine.org/Editing_configuration

Removing crop/reg marks from PDF

I'm using Acrobat 8 Pro.
I need to place individual pages from a PDF (for which I do not have -- and cannot get -- the native files) in an InDesign document.
I need to remove the crop marks and registration marks from the PDF pages. (They weren't offset properly, so they extend into the bleed area.) I know how to do it manually, but there are a lot of pages and I'm looking for an easier way out.
I could have SWORN that I had once stumbled upon a setting/option to remove all marks that were outside the image area, but I didn't make a note of it and can't find any such option. (It might not work in this case anyway, since the marks do overlap the image, but I still want to know if the capability is there.)
At this point, I'm seriously thinking that maybe I dreamed it.
Does such an option exist? If not, is there some way to remove those extraneous marks from all pages in a PDF in one fell swoop?
TIA,
Marlene

If I crop the pages so that the crop marks and registration marks are gone, the pages will be too small. I need to retain the full image size, but get rid of the marks that are jutting into the image.
Maybe I'm not explaining this clearly ... the bleed size of the image area on each page is correct. But the crop marks, instead of being offset so they fall OUTSIDE the bleed edge, actually extend into the bleed area.
The marks should be offset a couple points more than the bleed size -- e.g., if there's a 9 pt bleed, the marks should be offset 12 pts or 15 pts.
But they aren't -- they were offset less than 9 pts, so they don't fall outside the bleed edges. They extend into the bleed area.
Marlene

Crop lines on exported video

Hey people!
I'm editing a video on Premiere CS5.5 where i need to use the crop tool on the sides of the original video (to get rid of unwanted elements), use the change color tool to make the background white and then use a white background layer... now i have a problem! when i watch the exported file i can see thin white lines, them being the crop lines... how do i get rid of them?
by the way, if anyone knows a simplier and faster way to do what i intend, which is basically giving a full white background to a video where i have a female model on a yellowish background with unwanted elements on the sides (projectors and stuff) let me know please!
cheers and thanks!
Ivo

as far as I understood, what you are trying too do is remove the background. Instead of replacing the color with white, why not just replace it with transparent? This is best done with a key, for example the build in ultra key is not too bad and is far more flexible than the color replace tool.
Now to get rid of other elements in the background I recomend the garbage mask, which comes with 8 or 16 points.
About the crop tool: in CC there is a great new feature which allows you to feather the edges of the croped images.

Setting Default Custom Arrow Tip Sizes

We use a custom arrow tip in FrameMaker 11, everytime you close Frame you have to set the custom setting again, is there any way to set this so it always stays at our chosen custom arrow tip size?

If you end up using RefPage arrows, as we have, you might as well make them even more useful with self-masking properties.
Our RefPage has several different arrows, which were based on FM arrows (which is important for getting a useful outline when dragging and rotating).
To those, we added, with the polygon tool, zero border polygons, just larger than the arrows, filled with the named color we use for all masks (which is set to white or knock-out for pub). This makes the arrows easy to see and not be confused with image content.
One variant creates a border all the way around the arrow, which is useful for photos and contone images. Another exposes the tip, which allows the tip to exposes the tip, allowing it to just touch items in line art. Both versions have a slightly expose tail, which allows them to touch callout bubbles and not mask them (the bubbles have their own masks, and need to be sent below the arrows). The arrows are grouped to the mask for easy copy and paste. Although enormously useful, I should note that such masked arrows don't scale acceptably. You will also need to create them at max res, with grid snap off.
For what is supposed to be the premier tech comm app, FM is extraordinarly weak on callouts. Most CAD apps at least have smart c/os, but they tend to be aesthetically unpleasant.

Add/Remove Text Lines FCPX

In FCPX, with the title design called "Winner's Circle" it is set at default to have 5 text lines. I only need 2 text lines for this title. The amount of text lines determines how many times "winner's circle" repeats the animation. It is repeating it's animation 3 times where there is no text content needed. How do I add or Remove a text line? Is this feature possible?
I've attempted cutting and shortening the clip where I want it to stop animating; it'll persist for another 3 times no matter what the duration is.
Option F will not allow me to make a freeze frame of the motion title graphic called "Winner's Circle". Is there another way to make a freeze frame other than taking a screen shot? With this option, I would be able to add another video layer with the freeze frame of "winner's circle" above this same clip while the animation would repeat 3 more times unnecessarily--in order to disguise it...
I've attempted to troubleshoot with keyframes... I need "winner's circle" to cross dissolve with another clip, not gradually fade to black.
Thanks!

I'm the one that's sorry! You are a brave soul. Most come here too timid to try most things out - you're already slogging around in the guts of a fairly sophisticated template (difficulty points due to 3D orientation and behavior animation of material.) I guestimated your abilities based on such.
My modified suggestions:
1) you will not need to clone anything [save cloning for another day ]
2) Find the Text Layers Group
3) Delete the 2nd through 5th "INFORMATION" text layers (in order of appearance - top to bottom)
4) Delete the 2nd through 5th Ramp behaviors (at the top of the "folder" -- in order of appearance... etc.)
You should be left with one "INFORMATION" and when played, the wheel should spin and stop with the text in the correct location.
Select the Text "Information" layer and under the canvas in the timeline, click and drag the right edge out all the way to the right. This will keep the text "on" the rest of the length of the template.
Play again and make sure the "Information" stays on screen for the entire length of the template.
Click on the time clock icon under the canvas so that the clock hands read quarter past 12 then double click on the time and type "5." (number 5 plus a period) + enter (set the length of the template to 5 seconds.)
With the Information text layer still selected, Command - D (duplicate the layer - you should now have an INFORMATION copy layer.) [both of these text layers will be independently editable in FCPX (that includes Fonts and size, etc...)
For the duplicate layer:
In the inspector > Properties, try these coordinates to start:
X: 486
Y: -1195
Z: 23
Rotation:
X: 0
Y: 0
Z: 78
Scale:
X: 95
Y: 170
Z: 85
Shear:
X: -24
Y: -9
[You can play with any of these settings to get the "look" you prefer -- I was just trying to "match" the design somewhat -- and it's a bit of a guess...]
Go to the Text > Format inspector. At the bottom of the column to the right of the word "Text" - when you pass the mouse over the region, a disclosure triangle will appear -- click it and select Publish from the dropdown.
To publish colorizing elements:
Select the Gradient > Gradient layer (bottom of the list -- if it looks like two blue squares, open up that group and select the "generator" icon (ultra miniature monitor looking thing with a test pattern). In the Generator inspector > Gradient, right click on the word Gradient (just over the color bar) and select publish from the dropdown.
Right OVER the gradient folder, the bottom item of the Text Layers folder, select "Rectangle" (just under Replicator.) In the Inspector: Shape > Style > Fill section, click on the word gradient just over the color bar (again) and select publish.
One more thing:
Drag the playhead to the 2 second mark under the canvas. Click anywhere in the layer's list that's NOT on any item (that is - deselect any and all items in that list.) Type the tilde key (or accent grave key, however you look at it) -- that will add a marker. Immediately type Command-Option M , which calls up the Edit Marker dialog. In the Type section, select Build In Mandatory... then OK.
Save the project.
You now have a 1 Score (Winner/Loser/Tie) winner's circle template. Use a new instance for each score in the storyline. You can trim the template or drag it out in time in FCPX -- the animation at the beginning will always play with exactly the same speed.
PS - an oddity is occuring with my copy: the lower Information text is ending up under the upper text (like a drop shadow) and repositioning in Motion makes no difference -- if that happens to yours, just double click on the "under" text and "slide it out" to where it belongs (in FCPX).
Anyway, it should look a little like this (at around the 2 second mark):
For completeness: if you need "subtitle" lines, these can be accomplished in FCPX. Type a return at the end of the title and continue with a second line. Select only the second line in the text box (text tab of the inspector) and resize the font (restyle it any way you like actually...) You shouldn't need to add extra lines to what you already have (in the Motion template). Also, if you need to get rid of one or the other -- select the text of it, and type in a space character (why a space? So you have something to double click on in the canvas if you need to find it again.)
HTH

I need to remove a phone from my plan, how do I do that? I just see suspend service. The contract is up for that phone.

I need to remove a phone from my plan that the contract is up for. I can not seem to find anywhere to do that.

You can't cancel a line of service on-line; you have to either call Customer Service or visit your local Corporate Verizon store.
Customer Service
Dial *611 from a cell phone
(800) 922-0204
Monday - Sunday 6 am - 11 pm

Regexp_replace to remove blank lines from multi lines in a single field

Gents. 10g R2.
   with test_tab as
   (select 'x'||chr(10)||'y'||chr(10)||chr(10)||'z' tester from dual)
   select tester from test_tabproduces
x
y
zI require
x
y
zThere's a lot of examples on how to end up with xzy, but I need to maintain the carriage returns, just strip out blank lines.
I've been trying with posix [:cntrl:] but it doesn't seem to want to work. Question: how to get the desired output?
If this has been answered on another post, please point me in the right direction and accept my apologies!

Hi,
The simplest thing might be to use LTRIM. (or TRIM, if you need to remove them from the end of the string, as well).
If you want a regular expression:
SELECT     REGEXP_REPLACE ( tester
                 , '(^|' || CHR (10) || ')' || CHR (10) || '+'
                 , '\1'
FROM     test_tab
;This might be easier to understand if you let x stand for CHR (10):
SELECT     REGEXP_REPLACE ( tester
                 , '(^|x)x+'
                 , '\1'
FROM     test_tab
;This is easier to understand: \1 is either the beginning of the string or x. When this is followed imeediately by 1 or more extra x's, then replace that whole pattern with \1 (that is, remove the extra x's).

Need to remove crop lines set in custom function 3

Similar Messages

Maybe you are looking for