Need to remove password when starting computer and ECT

I have posted a few times, but I think I only got one response, I have a few problems with this laptop Model # Satellite A135-S4527.So I'm going to list them and maybe some can help,other wise I may take a hammer to this laptop.
1: I put a password on my computer and I need to know how to get it off .
2: My text size keeps changing from large to very small ( I can barely read it) I have tried everything that I have read   to fix it but it doesn't help.
3: Now my laptop has started going to lock up computer by it's self and I keep having to log in again over and over. 
4: And for some reason I must be stupid because when I get in here, I can never find if some one answered,  I'm sure I
  have other problems but my brain just went dead, I do hope some one will be able answer these problems
Thanksshirley53

First off, ALWAYS provide the COMPLTETE Model Number of your system when you post.  WIthout that we are flying blind.  Also, it helps to tell us what operating system you are running.
Number 4 is easy.  Click on your user name and it will show you every thread you have started as well as every post you have made.
You'll need to be more specific on which password you need removed as there are several possibilities.
You need to run chkdsk/r to clean up the hard drive.  Go to Start - All Programs - Accessories - Command Prompt and type in  chkdsk/r  then hit enter.  Type in Y when it asks if you want to run this at the next boot and then restart the computer.  This could take over an hour depending on how screwed up your hard drive has become.  These instructions are for WIndows XP.  Vista might be slightly different, but I don't have a Vista system available at the moment to check.
I have no idea about the text size change.  I've never run into that before, but there are posts in your previous threads about this.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Similar Messages

  • When starting computer, multiple DIAdem attempted startups (5 copies try to start) and errors.

    When starting computer, multiple startups of DIAdem clog the boot up process (5 copies try to start) and error messages state "Data Finder cannot start due to an internal error  (100): invalid config  STORE! USIF  error MSG:"     I did not ask  or want DIAdem to autostart but it sure wants to.  WHY?  Any help here? 

    Helllo Brad (and Matthias),
    I have  been using the tool Matthias recommended and it is indeed a very useful program.  It looks like I can stop it from doing the autostart.  However, I did not intentionally cause DIAdem to autostart and do not know how this happened.  (I must have done it since no one else messes with my laptop.) 
    A bit of historical info.  I originally used a demo disk of ver 10.0 and then used the activation code after purchasing.  I started having trouble with auto start and decided to upgrade to version 10.2 hoping ver 10.0 would  be deleted and all troubles would be gone.  No such luck.  I now have both versions and need to remove ver 10.0.  However, the control panel and 'add or remove programs' only finds one Nat Inst program (and it doesn't identify version). 
    Manually starting ver 10.0, generates an error message: "cannot open data store "MydataFinder"
    Manually starting ver 10.2 generates an error message: ""data finder cannot start due to an internal error (100) invalid config etc."
    In  spite of error messages, the programs seem to generally  work fine.  I am in the process of using the program recommended by Matthias to eliminate startup issues. I am also considering uninstalling and re-installing but am uncertain of which version will be uninstalled since only one program is identified.
    After I send this, I'm going to do a restart and see if problem with multiple restarts has been eliminated.
    Thanks for all your  help.
    David F

  • HT1926 iTunes won't install everything it needs to run.  I remove it from my computer and reinstall it and it keeps saying it.  I am using Windows 7 and the latest update from iTunes.

    iTunes won't install everything it needs to run.  I remove it from my computer and reinstall it and it keeps saying it.  I am using Windows 7 and the latest update from iTunes.

    What does the error message say when you install iTunes and it fails?
    This post was edited by Malignance

  • Hello..i have the macbook pro and i had a password when it opens and when i have updated the software when i delete something it asks me every time to put my password ;/ how do i delete my password or just correct a setting for it?

    hello..i have the macbook pro and i had a password when it opens and when i have updated the software when i delete something it asks me every time to put my password ;/ how do i delete my password or just correct a setting for it?

    You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type:  ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.   
    Repair User Permissions

  • No picture when starting computer

    Just bought a K7n2GM with an AMD XP 3000+ Barton earlier today + Harddrives + Memory (DDR 2700 512 MB 333 MHZ) and finally a dvd burner from LG. Installed all parts (physically in the box) and when starting computer no signal is sent from the VGA output (on the motherboard) even though harddrives, fan etc seems to work. Does anyone have any idea of how to solve this problem?

    +5 35a, +12 18A, +3.3 28A
    I am having the same problem (so it sounds) as falcon74.  I have just installed a K7N2GM2-LSR to replace an ASUS MB.  I have checked everything twice gone through to TBL shooting on the web site and I can't get a post, beep or anything else.  The fans turn on, the HD lights come on, the cd-rom's spin up if I put a disk in at start-up.  I am loosing my patients.  My info is in my signature and my PSU info is above.  I have tried with everything disconnected and everything connected.  Oh, and i didn't get a D Bracket w/ my MB so I can't give you that info.  If I could just get to the bios I could probably figure it out.  Help Please, Thanks

  • How can I get my clock to remain on the correct time when starting bootcamp and windows XP? wireless option is not available.

    How can I get my clock to remain on the correct time when starting bootcamp and windows XP? wireless option is not available.

    Have a look at solutions in here https://discussions.apple.com/message/10689317#10689317
    Regards
    Stefan

  • Received this error message when starting iTunes and reinstalling does not resolve it:  The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing.

    Received this error message when starting iTunes and reinstalling does not resolve it:  The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
    Can I uninstall existing iTunes without losing my media library?  and then install fresh to fix this problem?

    Hi there kweitkamp,
    You may find the troubleshooting steps in the article below helpful.
    iTunes for Windows: "Registry settings" warning when opening iTunes
    http://support.apple.com/kb/TS3299
    -Griff W. 

  • I can no longer print to the 3 Canon printers on my local area network. The print dialog box states that the print file is accepted and the job is printing, but the files never print. Everything worked when the computer and printers were initially set up.

    I can no longer print to the 3 Canon printers on my local area network. The print dialog box states that the print file is accepted and the job is printing, but the files never print. Everything worked when the computer and printers were initially set up.

    There may be some security issues related to the USPS PDFs.
    http://www.certified-mail-envelopes.com/signatures-usps-certified-mail-return-receipt-requested
    I can't help with the scan/print problem. You seem to have done everything I would try.
    I don't know if maybe using a registry cleaner would help.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • How dome change my password for my computer and my username apparently it changed because i was moving things from my old mac

    How dome change my password for my computer and my username apparently it changed because i was moving things from my old mac

    If your forgot the administrative PW for the computer reset the PW
    OS X: Changing or resetting an account password
      OS X Lion>: How to Easily Reset the Administrator Password

  • HT2204 I changed my itunes email and password on my computer and now my phone says the password is wrong. How do I make my phone register the new changes?

    I changed my itunes email and password on my computer and now my phone says the password is wrong. How do I make my phone register the new changes?

    Try logging out of your account on the phone by tapping on your id in Settings > iTunes & App Store and then log back in with the updated id so as to 'refresh' the acccount on it

  • [CS3 Win]It is possible read an ini file when starting InDesing and hide some menus?

    Hi all.
    My plugin reads a ini file to configurate the main menu.
    It is possible read this file when starting InDesing and hide some submenus created in Myplugin.fr?
    I have no problem to hide/show a menu, but I don´t know what is the first event that runs after loading my plugin.
    Is there other possible way to do this?
    Thanks in advance.
    Best regards,
    Juanma.

    Have you tried implementing a startup/shutdown service provider (IID_IAPPSTARTUPSHUTDOWN)? If it's too late to hide the menu, then an IMenuFilter/IActionFilter should do the job for you to hide menu. Or you can dynamically build the menu on the fly too (see dynamicmenu sample from SDK)
    -lee

  • HT5624 I have reset my password with my computer and I am in the process of updating my iPhone and I am at the enter password window and cannot continue

    I have reset my password with my computer and I am in the process of updating my iPhone and I am at the enter password window and cannot continue.

    The Password reset email sent----follow the directions in the email to reset your password is the message showing on my iPhone. I did not receive the email and reset my password using my computer. iPhone will not allow me to continue and is stuck in the above window. How do I enter my mew password on my iPhone?

  • Hi, I'm new to using mac laptop, i just got one 1 month a go, i was downloading adobe flash player and it asked me for a password for the computer and i never created one, how do i over pass this situation?

    Hi, I'm new to using mac laptop, i just got one 1 month a go, i was downloading adobe flash player and it asked me for a password for the computer and i never created one, how do i over pass this situation?

    It is asking for your computer administrator account password to make system changes.  You "should" have an administrator account password.
    HTH

  • When i go to sycn my ipod, it says that it cannot sync due to a missing file. Is there a way to remove itunes from my computer and redownload it without losing all of my stuff?

    Can I remove Itunes from my computer totallty abnd reinstall it without losing my media?

    Do a backup of your iTunes library files first to a external hardisk. (ie all your music files)
    Go to this Apple download for iTunes 9.2.1,
    http://support.apple.com/kb/DL1056
    You just need to download and re-install.
    If your iTunes is earlier than 9 series, the library folder location need to be changed.
    or let me know your iTunes version and I sent you the website
    I wouldn't recommend the Latest iTunes 10.5.2, if you are not using iPod Classic 160GB late 2009 version.

  • Don't remember username and password from old computer and need to set up my new computer with itunes

    I have no idea what my itunes user name and password were from my old computer. I want to restablish my account on my new computer and then to icloud for my new iphone 4s.

    Just what do you want to do?
    In iTunes you can go to Store and sing out of existing account and sing into your account.
    You can sync music and videos from the other computer if you sync by the manual method.
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12313If you just sync the iPod will be erased and its content replaced with what is on the second computer.

Maybe you are looking for