Need to remove work item.

Hi Experts,
I am getting a work item in SBWP Transaction.Now If I check the workflow for this ITem Through Transaction PFTC.
I got in Rules there in responsibility tabs have no position which consists our user.
But still the Our user is getting that message.
And that message is for diaproval.
I want to remove or hide that message. How it can be done?
Thanks,
Jassi

You might be getting those workflow messages, since someone might have kept you as their substitution. Hence the work items which should actually appear in their inboxes gets forwarded to your mailbox since you are the substitute for them.
Regards,
Rinkesh Doshi

Similar Messages

To remove work item from Universal worklist

Hi,
Can we remove work item from Universal Worklist by deleting. We don't want to approve or reject them but want to remove from inbox.
Is there a way for this?
Regards
PV

Hi Parveen,
check the below note
check below note
Note 49545 - Deleting unnecessary work items
Koti Reddy

BPE crash - Trying to remove work item and SXMB_MONI message that caused it

Hi,
I have a file to IDOC scenario with BPE. We have had a large file that was picked up by XI in error, but the adapter engine did process the XML conversion successfully. This message was sent to the BPE but due to the message size, the BPE crashed. Currently the work flow that caused the crash is in started status in report RSWF_XI_SWPC - continue workflow after system crash. and we have a message in SXMB_MONI for this workflow that is still in status outbound to PE "message being sent". We would like to remove or cancel the workflow and the message in XI. I have searched around for the best way to do this in this situation but have not found anything. We cannot cancel the message in SXMB_MONI due to the status it is currently in. Can we:
1. stop and start BPM to resolve the issue or
2. some how change the status of the workflow to error so the message in SXMB_MONI can be cancelled.
3. Should we just leave the work item and messge as is, because it is not affecting anything else in XI.
Any help would be apprecieated.
thanks.
Jamie
Edited by: Jamie Bullen on Jan 22, 2008 4:04 PM

Hi,
Thanks for your reply. I'm pretty sure I can delete the work item from SWWL but I don't think the outbound status of the message is SXMB_MONI will change once this is done.
thanks.
Jamie

Help needed in removing duplicate items of list box in java

How to remove duplicate items of list box while dynamically inserting (on-click event)
It is not identifying duplicate data
Variable name is HP_G1
HP_dmg1 = (DefaultListModel) HP_G1.getModel();
int a = HP_G1.getModel().getSize();
System.out.println("HP list no--------> "+a);
if(a!=0)
for (int j=0; j<a; j++)
String item1 = String.valueOf(HP_List.getModel().getElementAt(j));
System.out.println("HP list added--------> "+item1);
if(HP_dmg1.equals(item1)){
HP_dmg1.remove(j);
else
HP_dmg1.addElement(GPL);
}

Your code is unreadable, so I'll ignore it. In the future please press the message editor's CODE button to format code.
As to your problem, to the point you normally use a Set instead of List when you don't want duplicates in a collection.

Need to send work item to mutiple users at top level in PR release strategy

Dear All,
We are using workflow WS20000077 for PR release strategy.
Now the requirement is, at higer level, say at Board of director level, the work item should go to mutiple users and any one can approve/reject the work item. In other words, upto the board of director level , the workflowwill send work item to respective users as defined in release strategy, only at the Board of director level it should send work item to multiple users.
So how to send work item to mutiple users at a particular level in release strategy.
Thanks & Regards,
Fawaz

Hi Fawaz,
Your requirement can be achieved if you use Organisation Plan for agent assignment.
In the plan, you create position for each stage and assign the position ID in the worklfow section of the PR release strategy against the release code in MM.
The work item will goto all the users assigned to that position. this way is very flexible too for future agent change. only change the user assignment to the position.

FH087 - Remove open item management to GL Accounts

Dear All,
I need to remove open item management to few GL Accounts. The balance is Zero now.
I removed the open item management and try to save the GL Account and the error meesage showing with FH087 - You cannot change Open Item setting.
Requesting help and guidelines from the forum.
Thanks in advance,
Regards,
SS

Hi
Please refer to below answers:
1) the OSS note 175960, mentions the afftected releases for software component SAP_APPL is till release 600. Currently we are at SAP_APPL 604 level 07. Is this note applicable to us?
Yes, it can be used.
2) Will the program ZFSEPA03 / RFSEPA03 converts the current open item line items to line item display?
The report does the following:
1. Sets a posting block to the GL account.
2. Selects all open items and deletes the XOPVW indicator in tables BSEG and BSIS
3. Deactivates the XOPVW flag in the GL account master data.
4. Deletes the posting block.
3) After executing this program, if suppose later any of the clearing document for the cleared items in the account got reversed. Will this items become open item again? if yes, then it won't be possible to clear these items as the gl won't be open item managed.
I am not sure about this step, but you will have (old) cleared items in the document tables (BSEG/BSAS) which does not match the current account settings (as these items are from the dateBEFORE the change took place). But this does not have any influence on postings in the daily business.
4) Any pre requisite like the gl account should have zero balance or there should not be any open items, before executing this program ZFSEPA03.
The subsequent deactivation of open item management is not that critical.
It is not necessary to bring the account balance to zero, you can execute ZFSEPA03 without any correction postings. And it is even not necessary to change the master data manually, this will be done by the program.
5) is there any other transaction similar to FAGL_ACTIVATE_OP for deactivating the open item managed tick in ECC 6.0 with NEW GL active.
You will do it by running the mentioned report.
The RFSEPA03 or your 'Z' version will not have any influence on the NewG/L tables likeFAGLFLEXA Only the currently open items will set to normal items.
Regards
Divya S

Forwarding 'Wait Step'work items using SWIA

Hi,
I need to forward work items of one user A to another user B urgently, using SWIA.
The work items are in executed state. This is after a fork step in the workflow, where the executed work item is one branch of the fork.
As these items are executed, we will have to forward the work items that are in ready state.
The work item for the other branch of the fork is in ready state. However this is a wait step, and hence I am not able to forward this item.
Kindly advise as to how should I forward these items.
Best Regards,
Smruthi.

Hi Smruthi,
Dont confuse with the wait for events and dialog work item. There is no direct link between the wait for events and the work item.
Only dialog work items needs the user action and dialog work item's only can be forwarded to other user's.
For this, the work item should have the status of 'Ready'. If the work item has the status 'In process' that means, the user opened the work item and still he didnt take ant action on it.
In this case, using SWIA you can manually change the status as 'Ready' and then you can forward the work item to the other user's.
To forward the work item use the function module 'SAP_WAPI_FORWARD_WORKITEM' or use the SWIA transaction.
Thanks,
Viji.

Re-Filling Dimension table, after removing line-item property

Hi Friends,
We need to remove line item property of a line item dimension of an infocube. I made that change and activated the cube. But when i check the dimension table of this dimension, i see no records regarding this.
This cube has 60 mil. records, so we can not delete the content and reload it.
Do you guys know anyway to fill that dimension table with the existent data in the cube ?
Thanks & Regards
S.P.

Hi Suresh,
I didn't delete the content of the cube but was able to remove checkmark of line-item dimension. Cube was activated successfuly. But the problem is that there in no data in this newly created dimension table..
Regards
S.P.

How to forward a work item from user inbox

Hello,
We are trying to find a way to remove work items from a users inbox. the workitem has not been opened
and also it is possible that the work item is in more than 1 users inbox.
we want to remove the work item from only the 1 user and leave the work item in the other user's inbox.
Regards
Gaurav Maini

Hi ,
U can see the workitem of the user by the table SWWUSERWI giving user id.
select the workitem id.
Go to the transcation SWIA.
Forward the workitem to your inbox.
This will not appear in user inbox anymore
Regards
Pranab

Bulk Work Item

Hi Experts,
Like Bulk Mail sending mail to different ppl. Passing values from multicontainer to expression. I want the same to happen in Activity. As i have requirement where i need to send workitem to 3 ppl based on division. Each division may have more than one deciding authority, I need to send work item to all those ppl. Users i have got in one multiline container and when i pass that container to workitem expression, workitem is not been sent to thos ppl.
Plz guide me on how to send bulk mail. remember the no of users vary from division to division.
Regards,
Hari

Hi Martin,
Thanks for your reply and sorry about that short forms i was in a hurry.
I am doing credit limit check workflow. When a sales order is saved and if it exceeds the credit limit for that particular customer.Based on that sales order i need to send notifications in display mode (or) call the release screen for collesponding SAP users based on the sales division. There are 10 sales divisions and in each sales division there are atlease 3 users.
So i have maintained a ZTABLE with sap user ID and i have written a method and passed list of users as multiline container to Workflow activity expression.
I want to send work item to all 3 as we do in bulk mail.But when i pass as expression to work item in this case work item is not going to there inboxes.
Please guide me how to do this.
Regards,
Hari

Alas, I updated to Lion and need to remove Appleworks from laptop. What, besides the application (folder) else do I need to remove. I am putting items onto a CD so I may be able to work on a Leopard machine.

Alas, I updated to Lion and need to remove Appleworks from laptop. I am putting items onto a CD so I may be able to work on a Leopard machine.What, besides the application (folder) else do I need to remove to the CD?

(user)/Documents/AppleWorks 6 Button Bars (this is no longer used) and Appleworks User Data
(user)/Library/Preferences/Appleworks (folder)

Incomplete Approval Work Item Removed from Agent Inbox

Dear All WF Experts,
I noticed this strange scenario:
Let say Agent A and Agent B are sent a work item.
If Agent A has executed the work item in SBWP previously, the work item is removed from Agent B's inbox (And the status is changed to 'STARTED'). However, the work item is not processed yet.
Is there anyway to make the work item stays in the inbox until either agent approved the work item?
Thanks in all advances.
Regards,
YL

Thanks Arghadip for your response. Sorry for my blunt question.
Actually, the Agent A and Agent B are the approvers for PR approval by position (Agent A and Agent B are the users in the mentioned position).
Thus, when a PR is raised, both Agent A and Agent B received the same PR work item.
If Agent A execute the work item but does not release the PR, the work item still remains in Agent A's inbox as there is no terminating event. So, based on the logic, in Agent B's inbox, the work item should still be there because the work item is not fully processed yet (no terminating event takes place).
But, now, from what I saw, as long as any of the responsible agents executed (started) the work item, even if they do not release it, the work item is removed from all other agents' inbox and only remain in the inbox of the agent who first executed the work item.
I interpreted this as there is at least one agent already view the work item and know the existence of the PR to be approved, thus the other agents do not need to bother about the PR anymore. But, is my interpretation correct? And is there anyway to make the work item stay in the inbox of all approvers until there is one terminating event?
Thank you so much.
Regards,
YL

Need to remove default dock menu item and add new.

Hi ,
I am working on Carbon application on Xcode . I need to remove default menu item attached to my application dock menu like ( Remove from Dock , Open at Login , Show in Finder ).
I also need to attach new items to my application dock menu and want to handle its event.
Thanks in advance,
Sunil Adhyaru.

Well, this is a programming question more than a question on how to use the Leopard environment (you might want to post to one to the programming forums).
However, basically, you can't remove the Dock menu items that the Dock itself adds (add/remove from dock, etc.). You can add your own menu items, however. Use the interface builder to create a nib that has a menu in it -- call it something catchy like MyMenu.nib.
Then in the application property list file (Info.plist) add property called "AppleDockMenu" and set the value to a string that's the name of your nib file (without the .nib extension).
Subsequently, you treat that menu just as you would the menus in your menu bar. That's all there is to it.

I was told I need to remove the enterprise server account I have and need to add a new one for work but the IT person did not tell me how to do this. Can anyone help?

I was told I need to remove the enterprise server account I have and need to add a new one for work but the IT person did not tell me how to do this. Can anyone help?

Jennymbell, never fear help is here!
Have you tried contacting your IT department for assistance? You can visit http://bit.ly/QECbGh for steps on how to enterprise activation.
Keep me posted if you need further assistance.
John B
Follow us on Twitter @VZWSupport

Need help in dispalying work item details

hi friends
I am Displaying work items with some details like work flow item text ,user ,agent and all
Her along with these i need to display responsibility object(OTYPE = RY) mapped with work item ..
For this i have Responisbility (HRS1000-stext) and responsibility object(HRp1240-objid) on selection screen .
So finally i need to relate these responsibility and responsibility object and work item ..
any one have experience on these type of situation please help me .

Hi
your answer is helpful to me ..
I am getting the RY objects from HRP1001 .
And when i go to HRP1218 No records for the OBJID from HRP1001.Is it the data problem ..
If i have the records in HRP1218 ,if we pass the TABNR in HRT1218 ..can i get the work item with TABNR.
Becuase when i see in HRT1218 all records have PLANT as re field .

Need to remove work item.

Similar Messages

Maybe you are looking for