Need to rename the Distrinution model ( BD64)

Hello,
Please tell us how to rename the Distribution Model (BD64) along with the technical name.
This we need to perform as post-refresh activity.
Thanks
Hari

Hi Hari,
To rename Distribution Model View: Select the model view and press function key 'F2'. Enter a new name in 'Short text'.
To rename Description/Technical Name: Select the model and click on 'Add Message Type'. Enter a new name in Model view.

Similar Messages

I have duplicated a sheet and need to rename the tables in the duplicate. Can anyone help me?

I have duplicated a sheet in Numbers and need to rename the tables in the duplicate sheet to avoid circular references. Can anyone help me?

Hi Pacarina,
I'm not sure if this is your question (I'm puzzled by your mention of circular references) but this is how you change a table name in Numbers 3. Select the table (click on it), then make sure Table Name is checked in the Table tab of the format panel, then edit the name directly where it appears above the table.
SG

Delete or Rename the VC Model name

Delete or Rename the VC Model name
I have created some models I am not able to delete or remane them, could you please advice me how to achive this.
Thanks

If you use this version, please use the following documentation to rename or delete your models.
http://help.sap.com/saphelp_nwce10/helpdata/en/45/05d6004bb10488e10000000a155369/content.htm
Regards, gilles.

Data Ditribution Model BD64 config

Hi All,
I want to know when do i need to do the BD64 configuration. In my project i checked most of the time bd64 config is missing still idocs are moved to SAP system or PI or legacy sytem without issue.
Few BD64 config they have done which are attached with filters. Can my idoc config be complete without creating distribution model. if yes from where it get's destination server( is it from the RFC connected to port) !!! ...and when is it required for bd64 model

Generally you configure the Distribution model when you are working with Master Data.
Based on the Distribution model, SAP generates the IDOCs for each system, if there are more than one LS involved.
If you want to use the Message Reduction for standard message type, you need to use the Distribution Model.
If you want to do the filtering based on the data, you can specify that in the DM.
If you are using the FM MASTER_IDOC_DISTRIBUTE, you don't need to maintain the Distribution Model. It can generate the IDOC based on your specified control record.
Regards,
Naimesh Patel

*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

How to rename the Target filename.

Hi...
I n file to file sceanrio, i need to rename the existing target file name...
I have searched in SDN. i have found like we can achive it by batch program.
can you please help how to do this...?
Regards,
Leela

> We need to chjeck the target directory and filename is present or not.Then we need to rename the target filename with the loctaion.
Do you mean there will be always only one file at any time?
You have to write the UDF for Dynamic Configuration in order to rename the file with your location.
UDF Code
You have to pass you location name to this UDF in your mapping.
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String SourceFileName = location;
conf.put(key, SourceFileName);
return "";
Note: You have to set the ASMA settings under Advanced Tab in both the adapters.
Now you second requirement is to first check if target directory and filename is present or not.
So this UDF has no control to check if file is present or not. The UDF will always write the filename with location.
Probably to perform this check before writing the file name you can try with
"Run operationg system command before message processing", otherwise you may have to write an adapter module for this.
Regards,
Sarvesh

What is the 5s model number for UK

I am looking to buy the new 5s and want to get whilst I'm in the US, but need to know the right model number for full UK network access, with the ability to operate on 4g when others companies than EE offer it, but I'm told they will be on other frequencies?
Any help would be appreciated

It is not possible to buy a UK model iPhone in the US.
It is only possible to buy a US model iPhone in the US. The US iPhone is not guaranteed to work on LTE outside of North America. Also, warranty is only valid in the country of origin.
Wait until you get back to the UK and buy the device.

Rename the portal Help link in the portal

I need to rename the help link in the portal masthead to some other name. Is there any option to change with out import the masthead par fil in to NWDS and hardcoding the help link name.

Hi Bris ,
you can do that ...open the Default Framework
Which is available at
Navigate to Content admin> Portal Content -> Portal User ->Standard Portal User
Refer to this also
MastHead Change & Portal Desktop
Now open the masthead from tyhe framework https://weblogs.sdn.sap.com/weblogs/images/251750294/framework_laout.jpg , there in the properties you will find an entry called as help link , change it over there it works fine .I have tested that for any issues please let me know
Thanx
Pankaj

Should i buy macbook Pro now??? or wait for the new model in 2012..???

i want to buy MacBook Pro....so... should i wait for the new model or???

Your question is analogues to the same situation if you were contemplating the purchase of a new car.
If you need one and the current model satisfies your needs, purchase it. If the current crop does not satisfy your needs you certainly can wait for a new model, but there is no guarantee that the new model will have features that will fulfill your expectations.
In short, your choices are dealing with the known vs unknown possibilities.
Ciao.

Need to rename files parsing date formats in the filename [SOLVED]

Godaddy changed the naming scheme of their server logs again. I need some perl or something magic that will convert format A to format B. Doing this is bash is going to be painful so I'm hoping some of your perl or python ninjas out there could help me.
format A: ex20140425000001.log
format B: Wed, May 21, 2014.log
So for the example above, that date needs to be converted to this name: ex20140521000001.log
Thanks in advance!
EDIT: nevermind... forgot about date.
#!/bin/bash
for i in *.log; do
fixeddate="$(echo $i | sed -e 's/,//g' -e 's/^....//' -e 's/.log//')"
useitdate="$(date -d "$fixeddate" +%Y%m%d%H%M%S)"
newname="ex$useitdate.log"
mv "$i" "$newname"
done
Last edited by graysky (2014-06-07 09:41:59)

sempervirent,
You're asking for some pretty advanced file naming. Most people aren't going to need that sort of function, so I doubt there will be a hook into Aperture to do such a thing. I suggest using a shell script or Applescript along with EXIFTool to rename files before you import them into Aperture. http://www.sno.phy.queensu.ca/~phil/exiftool/
Retain the unique number that the image already has
If you're not afraid of the command line, it's easy enough to use a tool like awk or maybe perl to parse that sequence number from a well-formatted string like the picture name
Replace "DSC" with the camera model (D3X)
You can use EXIFTool to extract the camera model from the EXIF dat ain the photos
Add a digit prior to the four-digit string to indicate the true numeric sequence of the file.
Good luck with this one. You'll have to do a filename search through all of your previous files to find out what 10,000 you're on. It's possible, but you'd have to do some specialized coding in AppleScript or shell script.
nathan

Renaming Foreign Keys in the Relational Model

Hi,
I'm new to Data Modeler, we are using v 3.0.0.66.5 and Oracle 11g, and I'm trying to build a Logical and Relational model for a new application.
We always name our Primary Keys as ID, this is causing me a problem with my Foreign Keys names in the Relational Model, as they are showing as ID#. Is there a way to add the abbr. of the table to the Foreign Key?
Thanks in Advance
Sue

I always do that job using Naming Standard Templates. This sequence renames ALL FK COLUMNS for ALL TABLES only in RELATIONAL MODEL:
-Preferences > Data Modeler > Naming Standards > templates
-into the box "Column Foreign Key"
-Put something like that: {ref table}_{ref column}
-Then, go into your modeler tree, select the relational model, right click and use "Apply Naming Standards to Keys and Constraints"
-deselect all
-select the last option "Column Foreign Key"
-Go.
What if the names still collide? What if you want to do the job for some--but-not-ALL tables? forget the method above. A transformation script will do that.
You'll need some of these building blocks:
- table.getFKAssociations()
- keys.getRemoteTable().getAbbreviation()
- column.setName()
I'm novice to script coding, sorry I can't assemble a scripted solution right now.
Edited by: T. on May 31, 2011 8:50 AM

I have a macbook air bought in 2010 wit liquid damage that might has affected the SSD card. I need to get my data but apple won't help. Authorized dealers never seem to have the same model to try whether the SSD card works. How can I get my data quickly?

Hi
I have a macbook air bought in 2010. It has liquid damage that might or might not affected the SSD card. I need the data on my SSD card for work and I need it urgently. Apparently Apple won't get the data out, even if I have apple care... Licensed apple dealers need to have the same macbook air model so they can insert the SSD card and check whether the data is there, and they never seem to have one...
I'm really disappointed with apple. It's been two weeks and I haven't been able to find out whether the SSD card is holding my data. It can't take that long to do it in store... How can they sell a product and then wash their hands on the matter?
Anyway, enough with the apple rant. I need to get this data urgently so I need to find out how I can get it out of the card. The SSD card and data might be fine so I don't want to take it to a data recovery centre and get charged loads.
Thanks for your help.
Olatz

See this link for a 4870 card, best instructs for flashing for a noob like me. (last lowest price was $150 for a 1GB vRAM 4870 from TigerDirect).
http://web.me.com/jacobcroft/4870Flash/4870Flash.html
However, not every 4870 card will work with the ROM currently floating around out there. BEWARE!
Link to recovering a bricked card:
http://forums.techpowerup.com/showthread.php?t=64328

***CALLING ALL MACBOOK AIR USERS*** Will the base model of the 2013 Macbook Air 11" be enough for my needs?

Ok,
This is my first post to this forum.
I have a Late 2011 i5 Macbook Pro. I used this last year during college but the weight was just unbearable. I have decided this year to upgrade to a Macbook Air. Here is my question.
I am starting uni and will be studying Nursing and so I will not be using any heavy software or progaming etc.
The only thing I will use is Office for Mac and browsing. I normally keep around 15 browser tabs open whilst I research.
I also like to download so I would also like Vuse on my Macbook too. I own an external hardrive and so memory isnt a big deal (unless it makes a difference to the performance of the mac itself, Sorry im not great with this stuff)
Do you guys think the base model of the 11" Macbook Air (1.3ghz, 4GB ram, 128GB SSD) will be enough for my needs or do you think I would need to custom build it (1.7ghz, 8GB ram, 128GB SSD)?
My boyfriend thinks for what im using it for the base model will be fine but I dont want to get it to find that its not enough as my main concern is lag but I also do not want to pay extra for something which isnt going to be fully used (ie my current Macbook Pro).
For those of you who do have the 11' Macbook air, how are you finding it? Also, this will be my main computing device, I am selling my Pro but am thinking of buying the wireless keyboard and trackpad so I can connect to an extenal monitor whilst im at home.
Thank you guys in adavnce for any answers.

I too have a 2011 mackbook pro and I also have a mid 2012 mackbook air 128 gb ssd and 4 gb ram , I am probably goint to sell the pro because I just don't use it anymore . If you intend to do heavy multi tasking 8gb ram as suggested by a previous poster might be worth the extra money.

I have a Mac Pro 4,1 quad core intel Xeon running mac OSX 10.6.8 and I have just moved studios and now need to use the Internet wirelessly but there's no airport facilities on this model can anyone tell me what model of airport card I would need for this

I have a Mac Pro 4,1 quad core intel Xeon running mac OSX 10.6.8 and I have just moved studios and now need to use the Internet wirelessly but there's no airport facilities on this model can anyone tell me what model of airport card I would need for this mac

Instead of getting a wireless card for the Mac Pro, you might want to consider getting an 802.11ac wireless bridge device that would enable you to connect more than one device to it by Ethernet cable and to eventually take advantage of the faster 802.11ac wireless standard.

How do I remove the Hard disk from computer? I have an old iMac, model M5521 circa 2000. I need to wipe the disk clean to DOD specs before donating it.

I have an iMac Model M5521, circa 2000, which I must wipe the hard drive clean to DOD specs before donating it.
I have the DOD software on another non-apple computer. I need to remove the hard disk drive from the iMac to do this.
How do I get to the hard drive? I find only two screws on the back of the monitor/case and they do not help. What am I missing?
Thanks

It's not too hard but you have to take off the bottom cover of the case. These instructions shoudl show what yo uneed to do.
http://www.scribd.com/doc/103447/iMac-G3-Disassembly-Guide
I pulled the original 10G hard drive from our M5521 and replaced it with a larger one. The whole thing took under 45 minutes, including the 15 minutes it took me to recover a screw that fell into the works.

Need to rename the Distrinution model ( BD64)

Similar Messages

Maybe you are looking for