Need to replace dv7-3164cl keyboard

I have a dv7-3164cl (WA806UA) that has 7 missing keys, thanks to my son (age 2) thinking it would be fun to rip them off.  They won't go back on.
I CANNOT to save my life find a replacement keyboard.  The aftermarket/parts sites seem to pretend this model of dv7 doesn't exist, and the one that does says the keyboard is "out of stock" and has been for 2 months, and even if they do have it, it's nearly 80 dollars.
Is it truly impossible to get a replacement keyboard?  I can't seem to find it here from HP either.  I also really hate the idea of paying $80 for a **bleep** keyboard.
HELP!!!

Not sure what color you need but here is a black one from an eBay seller I have done business with for years:
$30 eBay keyboard
Last time I suggested eBay here I got a torrent of response saying that people have been ripped off there. I can't really understand it as I do the buying for a laptop repair shop and we rely very heavily on eBay (including quite a bit purchased from this seller) and only very rarely have any kind of problem and even then the seller usually takes care of it. We do confine the buying to a handful of vendors who seem to be permanent fixtures on eBay. For example, this one has nearly a quarter of a million positive feedback rating.
It also seems that the keyboards for the dv7-2000 and dv7-3000 are the same

Similar Messages

  • Dv7-7128nr keyboard replacement

    I need to replace my keyboard but can't figure out how to remove the case. [Personal Information Removed]
    have removed all screws and other hardware but there seems to be a post holding everything together. Thought it might be the standoff but not sure.

    Hi bradsb71, welcome to the HP Forums. The steps to replace your keyboard are outlined on page 57 of this: HP Pavilion dv7 Entertainment PC - Maintenance and Service Guide
    I hope this helps.
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Need to replace space bar on keyboard

    I need to replace space bar on my keyboard of my HP Pavilion Entertainment PC.
    It has been completely pulled off and won't click back. I think that little brackets are broken too. I don't know where to go to find the replacement or to have someone replace it for me. Please advise.
    Thank you

    Hi
    Is your warranty valid?
    In such case recommend contacting the ASP in your country to replace the kneeboard since this would be covered by warranty and it would be done free of charge.
    As far as I know the keyboard replacement procedure is the same like for the R700 Portege series
    Its difficult because you will need to remove other parts like
    Battery, sim card, express card slot, memory modules, base assembly to get access to an
    aluminum tape from the back of the cover assembly. Then you could turn the cover assembly face up and peel off the keyboard adhered to the insulator.
    And additionally you can not use the removed keyboard and keyboard insulator again. You will need to use new parts.

  • Dv7 2185dx keyboard

    I need to replace my keyboard on my dv7 2185dx, I noticed there is a connection for keyboard lighting while checking the part number of keyboard. Is there a backlit keyboard that will work for this laptop?

    HP Pavilion dv7 Entertainment PC - Maintenance and Service guide: http://h10032.www1.hp.com/ctg/Manual/c01689926.pdf
    Go through Page 4, 19, 57-60 - backlit keyboard is not listed unfortunately. There is no zif connector in the motherboard for light cable to fit it.
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • Hello, I am getting an HP Battery Alert, Do I need to replace?. It says it may need replacement.

    I am wondering if I really do need to change my battery on my HP Pavillion dv7. my Pc is about 2 years old and just got that message when starting my PC. 
    It says HP Battery Alert
    The system has detected the storage capacity of the battery stated below to be very low. For optimal performance, this battery may need to be replaced.
    Primary (internal) Battery (601)
    Enter- Continue Startup
    For more information please visit: www.hp.com/go/techcenter/startup
    Can you help me with this.???

    Hello, I am getting an HP Battery Alert, Do I need to replace?. It says it may need replacement.[ New ]
    08-12-2011 08:48 PM
    I am wondering if I really do need to change my battery on my HP Pavillion dv7. my Pc is about 2 years old and just got that message when starting my PC. 
    It says HP Battery Alert
    The system has detected the storage capacity of the battery stated below to be very low. For optimal performance, this battery may need to be replaced.
    Primary (internal) Battery (601)
    Enter- Continue Startup
    For more information please visit: www.hp.com/go/techcenter/startup
    Can you help me with this? how can i resolve it??

  • HP Pavilion dv7-3164cl (battery not charging)

    I have a HP Pavilion dv7-3164cl Entertainment Notebook PC that I purchased from Costco around 2 years ago. After having it for about a year and a half or so it just stopped working all together (wouldn't boot up at all).
    So here I am trying to get it to work today. I researched various "plugged in, not charging" threads around the internet.
    I eventually got it to boot up but the battery is not charging, it is just going down running off the battery.
    I followed this link to try a few things Battery Does not Power Notebook or Hold a Charge
    I have the led indicator lit up, telling me the ac adapter is working fine but yet the battery still doesnt charge. The bottom right of the taskbar doesn't say "plugged in" or "plugged in, charging".
    Going to the second step of "troubleshooting the system board" on the link I provided had me do this...
    "If the power supply works properly, troubleshoot the system board using the following steps:
    Keep the computer connected to the external power source and remove the battery.
    Press and release the Power button to start the computer."
    When I do this my Notebook doesn't power on, it needs my battery to turn on (and it does just fine, with everything working) but as I said, the only problem is that the battery isn't charging.
    Then I read further and see this...
    If the power LED is on , but the computer does not power on, then the computer needs to be repaired. Contact HP Service and Support for further assistance.
     So any suggestions as what to do next? I really don't want to send it in (too costly). I already tried buying a new ac adapter and that wasn't the problem. Maybe buying a new battery perhaps? I was thinking this because it wasn't used for quite a few months, but I was thinking it at least had to receive the charge at the very least. Maybe dying once I had the ac adapter removed, but when I first got it fired up it was up around 86% even after all this time and I was doing a few updates to the computer when I noticed it wasn't charging, but then I had ran it down to about 13% so I shut it off for fear of it turning off for good.
    Any help would be appreciated.
    PS: I already tried the reset method by removing the battery and disconnecting the ac adapter and holding the power button down for 20 seconds. I also tried the method of going to Start > Device Manager > Batteries > Microsoft ACPI-Compliant Control Method Battery > uninstall, Then scan for harware changes.
    Both these methods didn't work for me.
    Again, thank you in advance for reading this plea for help.
    -frustrated

    Hey there, 
    did you resolve the problem? I have my computer at 48% until it says plugged in, not charging.
    All the tricks found on the web did not work - any suggestions?
    Thanks

  • I need to replace my processors....how?

    I need to replace my processors on my G5.
    I already purchased the replacement processor, I just need instructions on how to do it.
    Can anyone help?

    Whoever knows how to do a replacement for, please post it here.
    Interestingly, I rand the Apple Hardware Test on my G5 (A CD that came with the computer). I ran the Quick and Extended versions. The Hardware Profile tab says I have a 2xPowerPC,G5 @1.8 GHz. So that must mean it's still reading two processors. By the way the fans have been blowing full blast for over an hour while it did these tests. So I restarted and now the darn thing is showing 2 processors (in Utilities=Activity Monitor). What happened? It "fixed" itself???
    After starting up and waiting a minute, the G5 froze up. Then I got the gray screen telling me to restart.
    I restarted. Then it froze up after I entered my login screen.
    I force quit and restarted. Got past the login. Activity Monitor shows 2 processors. Got a dialog box: The computer was restarted after Mac OS X quit unexpectedly. I clicked "Report." Here's what it read:
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000073 PC=0x000000000003468C
    Latest crash info for cpu 0:
    Exception state (sv=0x5D0DB000)
    PC=0x0003468C; MSR=0x00001030; DAR=0x00000073; DSISR=0x40000000; LR=0x000347DC; R1=0x446CBD50; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x04CE7CC0 0x000347DC 0x00034540 0x000A9714
    Proceeding back via exception chain:
    Exception state (sv=0x5D0DB000)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x00D7D000)
    PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
    Proceeding back via exception chain:
    Exception state (sv=0x5D0DB000)
    PC=0x0003468C; MSR=0x00001030; DAR=0x00000073; DSISR=0x40000000; LR=0x000347DC; R1=0x446CBD50; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x04CE7CC0 0x000347DC 0x00034540 0x000A9714
    Exception state (sv=0x00D7D000)
    PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    Model: PowerMac7,3, BootROM 5.1.8f7, 2 processors, PowerPC G5 (3.0), 1.8 GHz, 4 GB
    Graphics: GeForce FX 5200, GeForce FX 5200, AGP, 64 MB
    Memory Module: DIMM0/J11, 1 GB, DDR SDRAM, PC3200U-30330
    Memory Module: DIMM1/J12, 1 GB, DDR SDRAM, PC3200U-30330
    Memory Module: DIMM2/J13, 1 GB, DDR SDRAM, PC3200U-30330
    Memory Module: DIMM3/J14, 1 GB, DDR SDRAM, PC3200U-30330
    Network Service: Built-in Ethernet, Ethernet, en0
    PCI Card: usb, usb, SLOT-4
    PCI Card: usb, usb, SLOT-4
    PCI Card: pcie55,2928, SLOT-4
    Serial ATA Device: ST3250823AS, 232.89 GB
    Serial ATA Device: WDC WD5000AAKS-00YGA0, 465.76 GB
    Parallel ATA Device: SONY DVD RW DW-Q28A
    USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
    USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
    USB Device: PTZ-630, Tablet, Up to 12 Mb/sec, 500 mA
    FireWire Device: unknown_device, unknown_value, Unknown
    FireWire Device: unknown_device, unknown_value, Up to 400 Mb/sec

  • Dear apple, can you please tell me how to put my 'x' key back onto the computer properly without giving me an answer which will make me want to buy a pc like 'we WILL only replace the entire keyboard'?

    dear apple, can you please tell me how to put my 'x' key back onto the computer properly without giving me an answer which will make me want to buy a pc like 'we WILL only replace the entire keyboard'?

    My profile does say level 1 (0 points) quite obviously pointing out i am a noob at this, although i did try to correct myself in the previous responce to **macbook.
    I am confused why you think i havn't answerd michaels question though. 'I assure you the keyboard or the joining parts aren't broken and if it isn't broken i dont feel the need to replace it. '- that was me in the first responce explaining why im not buying a new one, answering the very question he asked.

  • I need to replace my laptop Hard drive.  How do I get my iTunes off the old hard drive to an external so I can put it back on the new hard drive?

    I need to replace my laptop Hard drive.  How do I get my iTunes off the old hard drive to an external so I can put it back on the new hard drive?

    Type move itunes library into the google serach bar.
    It has always been very basic to always maintain  abackup copy of your computer.  Do you not have a backup copy?

  • How do I find out the size of each individual element within a photoshop file as need to replace some elements?  Thanks :)

    How do I find out the size of each individual element within a photoshop file as need to replace some elements?  Thanks

    What do you mean by "Elements"?
    Elements in a flat image or Layers?
    Could you please post a screenshot with the Layers Panel visible?

  • My iphone 4s is over 2 years old and I need to replace the battery. How much will this cost at an Apple store?

    I have an iphone 4s that is  over 2 years old. The phone's battery is no longer able to hold a  charge for an acceptable length of time.  Assuming I need to replace the battery, how much will this cost at an Apple store?

    graciebethgrant wrote:
    Basically, I'm new to Apple, despite using them before, but I've never actually owned my own.
    Since buying this phone off a colleague at work, I seem to be having problems with it. First, I noticed how rubbish the battery life is, then my charger almost went up in flames and thirdly my camera lense is scratched beyond belief.
    I know the phone isn't within warranty, although I was lead to believe it was before and during buying it, so basically I'm extremely disappointed with the general make up of iPhone's considering they cost such a **** of a lot of money, you'd think they'd be built to last.
    Back to my main point, how much would it cost for a new battery? Or a new camera lense if anyone can help me with that? (I know that the back of the phone was refurbished just before my buying it, so literally just the camera lense)
    Thanks!
    So basically it sounds like you bought an abused used iPhone and somehow that makes the phone subpar because dispite the abuse it should still last forever and look like new? Batteries don't last forever, even under ideal conditions, so your expectatoins are unrealistic. Take it in and have an estimate done.

  • Using windows XP. After replacing a bad keyboard apple special keys no longer work with Boot Camp 3.2

    My Original keyboard (MB110LL/A) was damaged. I recieved a new keyboard (MB110LL/B) from the Apple Store online. Now none of the special Apple keys, volume up, volume down, eject, etc. work anymore. I have Boot Camp 3.3 installed on Windows XP. Boot Camp 3.3 requires Windows 7. I cannot get a replacement (MB110LL/A) keyboard anywhere.

    Adding to the above: I also tried plugging in an Microsoft USB keyboard at the point when Windows freezes at the Windows log-in screen. The keyboard is not recognized and the only way I can leave this screen is to power-off the computer.

  • Hi, i have a new number and I'm trying to activate iMessage but i can't.  it is only saying waiting for activation,  i have tried a lot of times with not success.  i'm not sure if i need to replace the old one to this new one, or what do do. can you help

    Hi, i have a new number and I'm trying to activate iMessage but i can't.  it is only saying waiting for activation,  i have tried a lot of times with not success.  i'm not sure if i need to replace the old one to this new one, or what do do. can you help

    Troubleshooting iMessage activation:
    http://support.apple.com/kb/TS4268

  • Does anyone know the power cord part for HP A532 printer? I need a replacement cord. THANKS!

    Does anyone know the power cord part for HP A532 printer? I need a replacement cord. THANKS!

    Here's the steps to follow if your printer isn't turning on.   
    If you've gone through all those steps and you still don't have power, there are a lot of places that sell a replacement cord and supply for that printer. 
    I am an HP employee.

  • Need to replace a file in the application server

    Hello Experts,
    Through ABAP coding, I need to replace a file which is available in the application server from one path to another. I should not use OPEN DATASET, CLOSE DATASET, DELETE DATASET and all as they deal with the data. I need to replace the file with out touching the data of the file.
    Could anyone please help.
    I heard that i have to use some UNIX script.
    Regards,
    Sudheer

    Sudheer,
    Try this...
    WITHOUT TOUCHING THE DATA OF A FILE . . .Just Moving the file ( unix commands in abap )
    DATA: command(255) TYPE c,
          fnam_sour(255),
          fnam_target(255).
    fnam_sour = '\hme\usr\interface\..... " path of source file
    fnam_target = '\hme\usr\interface\..... " target path, where file to placed.
    OPEN DATASET fnam_sour FOR INPUT " fnam_sour -> path of source file...
                     MESSAGE msg IN TEXT MODE
                     ENCODING DEFAULT.
    IF sy-subrc <> 0.
    < error msg : no file exits>
    else.
    OPEN DATASET fnam_target FOR INPUT " fnam_target -> path where file to be placed....
                     MESSAGE msg IN TEXT MODE
                     ENCODING DEFAULT.
    if sy-surc = 0.
    CONCATENATE 'mv' fnam_sour fnam_target INTO command SEPARATED BY
         space.
        CONDENSE command.
        PERFORM uxcmd USING command.
    endif.
    endif.
    *&      Form  UXCMD
    FORM uxcmd  USING    p_command.
    **issue UNIX command by calling system function.
      DATA: BEGIN OF itab OCCURS 0,
             line(255),
            END OF itab.
      CALL 'SYSTEM' ID 'COMMAND' FIELD  p_command
                    ID 'TAB'     FIELD  itab-sys.
    ENDFORM.                    " UXCMD
    Regards
    Ram

Maybe you are looking for

  • Controlling output video bit rate in FCPX

    I ran into a problem: I created a mp4 file with Share/Export File- (settings: Computer, H.264 Faster Encode, 1920x1080 - edited from an HD camera): its video always freezes at a definite point when played on my BD Player connected to my HDTV through

  • Calling a procedure from within a procedure

    Hi Guys, I have created a package to base a form on. The package contains some procedures, one of which is an Update procedure which can be seen below. I have a procedure in another package that I am trying to call. Basically the second procedure is

  • Can't sync ipod and windows

    my ipod touch wont sync with my itunes

  • Getting the value of a checkbox in an item renderer?

    I have a list that uses an item renderer with buttons and data.  I need to add a checkbox and get the value of this checkbox passed along with the event of the pushbutton. When the user clicks "add to menu: there is a click handler: protected functio

  • Creating TestStand threads from a DLL

    I have a DLL function that creates a thread to maintain a LabWindows/CVI user-interface. I'm interested in having UI events trigger the execution of a sequence in TestStand. In the TestStand API, I can find methods to start a whole new Execution. But