Need to replace reports

We want to replace reports from 8.5 version to 11.1.1..i want to know what should we need to check and what are the views i need to express before replacing the reports..

Hi
if you want to display in columns along with the data then right click and select properties and the select the disply as Text .
If you want to display in the header go the properties and in the header (Title area where u provide desxcription) instead of ur description enter the text variable &0T_CMONV& or you can select the text variable from the list .
Regards
Ram

Similar Messages

My laptop y510p has an issue for the third time and i need a replacement

my y510p laptop got an issue for three times and i need a replacement
i bought it in april/2014 and more than 2 and half months wasted for maintenance.
first time:
after few weeks i got problem with screen colors and i sent the laptop and the problem was in the motherboard and they replaced it.
second time:
i got it from maintenance center with 2 issues:
1- camera wasn't working
2- suddenlly freeze from time to time , sometime a blue screen appear after , i need to turnoff laptop from the power button to work again and it takes so long to open after that.
i sent the laptop again.
note: maintenance center claims that there wasn't any issue and even the camera that they told me that they fixed it they didn't wirte it in report. that's what i figured out when i talked with lenovo customer services
third time:
suddenly freeze from time to time again when i tried to enter bios immediatly after freeze happen i found that
harddisk wasn't appearing.
so i sent it again and i asked for replacement
maintenance replied that it's a motherboard and hardisk issues.
stayed there for 45 days and i called them for like 7 times to know what is the reply on my request and every time they ask me to wait more.
today i called them and they told me that the request of replacement is refused ...!
and they told me to post a message here if i insist on replacement.
laptop serial no:xxxxxxxxx
Mod comment: Removed Serial number for posters security.

It´s crazy how many people have the same kind of problems with this computer.. and what´s even worse is that it seems that the only option is to send it to Lenovo for a motherboard replacement. I have the same problem (mainboard dead) but unluckily for me, my y510p is out of warranty (I only used it for like 4-5 months then it was stored while I was away). Everyday I get on the internet to look for a motherboard replacement myself but I just can´t find any.. Why is that?
Also, this is a "new" computer, if I´m not wrong it was released around the end of 2013. How is it that they already discontinued it? Do they usually discontinue their products that fast? Or is it perhaps all these Y510P computers had problems from production? How can someone spend over a thousand dollars, use the computer for a few months (normal use, not even gaming..) and one day is dead and the motherboard needs replacement?? Why nobody really complains about this? I really don´t know what to do as that were all my money. I really just want to get rid of this crap and never ever buy Lenovo again and never ever recommend it to anyone. I don´t even feel secure spending the money on a motherboard replacement because it seems to me that the problem will come back. Because as I said this seems to be a problem in their production of this particular model. Again, over a thousand dollars computer and its quality is worst than the cheapest ones.. shame on Lenovo.

Muse: Needed to replace computer.

Muse: Needed to replace my computer. Copied Muse files all into the 'same place' on the C drive in my new computer. Now most of the assets are marked 'Upload' - notably the several hundred pdf's. Tried relinking several of them to the new folder containing them. Trued to save - but it won't save to the original Muse file. It closes without saving. Tried saving to a new file, but I get the following message:
Adobe Muse has encountered an error and will now exit. Please report the last few actions leading up to this error to the Adobe CC team. Unowned !!Deleted!! UID referenced. UID: U48073 Class no longer in database. (not even in ‘deleted = = true” state).
Can anyone help - I have been building the site for 2 years now. IT has been loaded to Business Catalyst from the old computer, but rather worried about going there in case it f**ks up everything. Please can anyone help?
Many thanks
Stephen

Hi Stephen,
Could you please share your .muse file with us to investigate? Please email it to [email protected] If your file is greater than 20MB you can use something like Adobe SendNow or SendThisFile or Dropbox. Please do not forget to mention the link to this forum thread in your e-mail so that we can identify the file.

How do I tell if I need to Replace Mobo?

I have gotten a lot of good interchange between members of this forum about my pathetic problems, and the time has now come to get down to cases: Do I or do I not need to replace my MSI mobo?
To recap:
1. My PSU has been noted as anemic 'round here, and I intend to take that into consideration. I never ignore advice when I have asked for it.
2. I have serious stability problems which I thought were to do with Win98, but which now appear to be something else: after reinstalling Win98 some of the same things (Windows Explorer executes illegal instructions, for example) are happening, along with an inability to use the sound controller.
3. Nothing anyone has suggested here has helped the sound controller problem, which makes it look intractable. Maybe so, maybe not.
I'd be glad for some help with this. Thanks.

Quote
Originally posted by Compicom
Hi,
if i didn't read it wrong your cpu is working at 5.75*200=1175 Mhz ?
and it is an athlon xp ? soo i thought that may be u can try to run your cpu with default settings 166*ratio etc. ...
it could be stop your stability problems..many cpu don't like to run at 200 fsb and your dimm 133Mhz...there is too many difference at bus speeds may be sycronizing problem occuring...
the explorer problem usually shows dimm issue..
Hi,
Thanks for your reply. I reviewed my stats with AIDA32 just now in response to your post, since I remembered that I had also set everything to system default. I assume without good reason that that is something like what you are addressing. Maybe not.
I found one thing: Problem: AGP aperture size is more than half of the system memory size. This ma...
It's incomplete. Is this a problem? AGP aperture is 128MB.
I just noticed something else. Since before I reinstalled, Windows has reported another, removable drive G:\. But there is no removable drive G:\. I hadn't thought about it since reinstall, thinking it would have gone away, but there it is.

I need to replace my processors....how?

I need to replace my processors on my G5.
I already purchased the replacement processor, I just need instructions on how to do it.
Can anyone help?

Whoever knows how to do a replacement for, please post it here.
Interestingly, I rand the Apple Hardware Test on my G5 (A CD that came with the computer). I ran the Quick and Extended versions. The Hardware Profile tab says I have a 2xPowerPC,G5 @1.8 GHz. So that must mean it's still reading two processors. By the way the fans have been blowing full blast for over an hour while it did these tests. So I restarted and now the darn thing is showing 2 processors (in Utilities=Activity Monitor). What happened? It "fixed" itself???
After starting up and waiting a minute, the G5 froze up. Then I got the gray screen telling me to restart.
I restarted. Then it froze up after I entered my login screen.
I force quit and restarted. Got past the login. Activity Monitor shows 2 processors. Got a dialog box: The computer was restarted after Mac OS X quit unexpectedly. I clicked "Report." Here's what it read:
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000073 PC=0x000000000003468C
Latest crash info for cpu 0:
Exception state (sv=0x5D0DB000)
PC=0x0003468C; MSR=0x00001030; DAR=0x00000073; DSISR=0x40000000; LR=0x000347DC; R1=0x446CBD50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x04CE7CC0 0x000347DC 0x00034540 0x000A9714
Proceeding back via exception chain:
Exception state (sv=0x5D0DB000)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x00D7D000)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x5D0DB000)
PC=0x0003468C; MSR=0x00001030; DAR=0x00000073; DSISR=0x40000000; LR=0x000347DC; R1=0x446CBD50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x04CE7CC0 0x000347DC 0x00034540 0x000A9714
Exception state (sv=0x00D7D000)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
Model: PowerMac7,3, BootROM 5.1.8f7, 2 processors, PowerPC G5 (3.0), 1.8 GHz, 4 GB
Graphics: GeForce FX 5200, GeForce FX 5200, AGP, 64 MB
Memory Module: DIMM0/J11, 1 GB, DDR SDRAM, PC3200U-30330
Memory Module: DIMM1/J12, 1 GB, DDR SDRAM, PC3200U-30330
Memory Module: DIMM2/J13, 1 GB, DDR SDRAM, PC3200U-30330
Memory Module: DIMM3/J14, 1 GB, DDR SDRAM, PC3200U-30330
Network Service: Built-in Ethernet, Ethernet, en0
PCI Card: usb, usb, SLOT-4
PCI Card: usb, usb, SLOT-4
PCI Card: pcie55,2928, SLOT-4
Serial ATA Device: ST3250823AS, 232.89 GB
Serial ATA Device: WDC WD5000AAKS-00YGA0, 465.76 GB
Parallel ATA Device: SONY DVD RW DW-Q28A
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
USB Device: PTZ-630, Tablet, Up to 12 Mb/sec, 500 mA
FireWire Device: unknown_device, unknown_value, Unknown
FireWire Device: unknown_device, unknown_value, Up to 400 Mb/sec

I need to replace firefox 4.0.1 with firefox 3.6 because my add ins don't work with 4.0

Question
i need to replace firefox 4.0.1 with firefox 3.6 because my add ins don't work with 4.0 but will work with 3.6. How do I accomplish this?

Any particular add-on? Maybe there's an updated version or substitute?
If you can't find a solution with Firefox 4, here's the process to roll back:
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
Close Firefox 4.
You could install Firefox 3.6 over it (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
Note: I haven't actually tried this myself!

I need to replace my laptop Hard drive. How do I get my iTunes off the old hard drive to an external so I can put it back on the new hard drive?

I need to replace my laptop Hard drive. How do I get my iTunes off the old hard drive to an external so I can put it back on the new hard drive?

Type move itunes library into the google serach bar.
It has always been very basic to always maintain abackup copy of your computer. Do you not have a backup copy?

I need the Log Report for the Data which i am uploading from SAP R/3.

Hi All,
I am BI 7.0 Platform with Support Patch 20.
I need the Log Report for the Data which i am uploading from SAP R/3.
I extract the DATA from R/3 into BI 7.0 DSO where I am mapping the GL Accounts with the FS Item. In the Transformation i have return a routine on the FS Item InfObject . I am checking the Gl code into Z table for the FS Item .
I capture the FS item from the Z table then update this FS item to Infobject FS item.
Now i need to stop the Data upload if i do not find the GL code in the Z table, and generate report for all GL code for which the FS item is not maintained in the Z table.
Please suggest.
Regards
nilesh

Hi.
Add a field that you will use to identify if the GL account of the record was found in the Z table or not. Fx, create ZFOUND with length 1 and no text.
In your routine, when you do the lookup, populate ZFOUND with X when you found a match (sy-subrc = 0) and leave it blank if you don't find a match. Now create a report filtering on ZFOUND = <blank> and output the GL accounts. Those will be the ones not existing in the Z table, but coming in from your transactions.
Regards
Jacob

I need help in Report for production orders for my customer.

Hi All
I have scenario where plant A needs the following report for Material XXX which has setting as Stock Trnasfer order from Plant B.
Need report withthe following details, Storage Unit number, Material No, Quantity, Planned Order Date in plant A, Date Produced in plant B, Date Received by Plant A.
Please tell me if there is any standard report to take the following details. Scenario is that the header material YYY in Plant A has one material XXX as BOM component. Now this material has setting as Stock transfer from Plant B. On creating a plan order for Header material it will create a Plan order in plant B for component XXX. The above said detail is required for component XXX in plant A.

Dear
Did you explore the report in CO46-Order Progress Report based on Sales Order /Material /Production Order
Or COOIS/COHV for your requirement.Here you can get the Planned Order Details and also Production Order Details .
Regards
JH
Edited by: Jiaul Haque on Sep 27, 2010 2:57 PM

I Need some standard report

I need some standard reports regarding Purchage Data Analysis Report and Open Sales order report .
Thanks & Regards
Satish Patnaik

Hi,
Check the following links:
http://sap-img.com/abap/make-e-mail-sender-of-po-the-po-creators-name.htm
http://sap-img.com/abap/sending-mail-when-the-purchase-order-is-released.htm
Regards,
Naresh

How do I find out the size of each individual element within a photoshop file as need to replace some elements? Thanks :)

How do I find out the size of each individual element within a photoshop file as need to replace some elements? Thanks

What do you mean by "Elements"?
Elements in a flat image or Layers?
Could you please post a screenshot with the Layers Panel visible?

Error Message: Information is needed before this report can be processed.

Hi Experts,
I am scheduling a Crystal Report from Infoview. Data Source for Report is BEx Query.
While scheduling i am providing all details like Parameters, Formats, Destination etc.
But Schedule is failing. The reason is parameter field is empty when i checked
in failed status , as below.
Parameters: [No Value]; [No Value]
Error Message: Information is needed before this report can be processed.
But when i am viewing the report with the same parameters, it is executing.
Please help
Regards,
Ajay Singh
Edited by: Ajay Singh on Sep 15, 2009 1:05 PM

Hi,
Try the below mentioned steps in addition to scheduling of your report.
Method 1: Following information might be helpful in resolving the issue.
To check if the .rep file exists in the Output FRS
1.Log on to the Central Management Console (CMC). Click Objects.
2.Click the report object to view its properties.
3.Click the History tab to view the list of instances.
4.Click Success to view the latest instance. Scroll to Instance Location.
5.Note the path name to the report.
6.Check the file store under the Output directory for the report.
If the report does not exist, delete the instance from the History tab in the CMC. Reschedule the report.
Method 2: To verify the configuration of multiple FRS
1.Log on to the CMC.
2.Click Servers.
3.Click the first Input file server. Note the home directory.
4.Click Home > Servers.
5.Click the second Input file server.
6.Check the home directory path for the second Input FRS. It must point to the same directory as the first Input FRS.
7.Repeat steps 2 through 6 to check the Output FRS.
====================
NOTE:
The Input and Output FRS physical machines must be able to connect to the file share for the file store. Also the Input and Output FRS are installed using the local administrator account. That account may not have rights to the network share for the file store. The security on the file store must be changed so the local administrator for each server can access it.
====================
Above mentioned steps are for deski/webi reports.
Cheers,
Suresh ALuri.

My iphone 4s is over 2 years old and I need to replace the battery. How much will this cost at an Apple store?

I have an iphone 4s that is over 2 years old. The phone's battery is no longer able to hold a charge for an acceptable length of time. Assuming I need to replace the battery, how much will this cost at an Apple store?

graciebethgrant wrote:
Basically, I'm new to Apple, despite using them before, but I've never actually owned my own.
Since buying this phone off a colleague at work, I seem to be having problems with it. First, I noticed how rubbish the battery life is, then my charger almost went up in flames and thirdly my camera lense is scratched beyond belief.
I know the phone isn't within warranty, although I was lead to believe it was before and during buying it, so basically I'm extremely disappointed with the general make up of iPhone's considering they cost such a **** of a lot of money, you'd think they'd be built to last.
Back to my main point, how much would it cost for a new battery? Or a new camera lense if anyone can help me with that? (I know that the back of the phone was refurbished just before my buying it, so literally just the camera lense)
Thanks!
So basically it sounds like you bought an abused used iPhone and somehow that makes the phone subpar because dispite the abuse it should still last forever and look like new? Batteries don't last forever, even under ideal conditions, so your expectatoins are unrealistic. Take it in and have an estimate done.

Hi, i have a new number and I'm trying to activate iMessage but i can't. it is only saying waiting for activation, i have tried a lot of times with not success. i'm not sure if i need to replace the old one to this new one, or what do do. can you help

Hi, i have a new number and I'm trying to activate iMessage but i can't. it is only saying waiting for activation, i have tried a lot of times with not success. i'm not sure if i need to replace the old one to this new one, or what do do. can you help

Troubleshooting iMessage activation:
http://support.apple.com/kb/TS4268

Does anyone know the power cord part for HP A532 printer? I need a replacement cord. THANKS!

Does anyone know the power cord part for HP A532 printer? I need a replacement cord. THANKS!

Here's the steps to follow if your printer isn't turning on.
If you've gone through all those steps and you still don't have power, there are a lot of places that sell a replacement cord and supply for that printer.
I am an HP employee.

Need to replace reports

Similar Messages

Maybe you are looking for