Need to reset 5G sometimes to get audio out from iPod connector

When I connect the 5G (and my Nano also), to one of my 3 docks, I sometimes have to do a reset to get line out audio out of the iPod connector. Anyone else see this behavior?

Good. Sometimes I get no output on my iTrip and have to reset my iPod, I didn't notice it getting better with the latest update - though I have now downgraded to V1.0 due to a few bugs in V1.1.
Mike

Similar Messages

  • Need to reset Nano sometimes to get audio out from iPod connector

    When I connect the Nano (and 5G also), to one of my 3 docks, I sometimes have to do a reset to get line out audio out of the iPod connector. Anyone else see this behavior?

    Yes, I have had identical behavior with mine twice when I hooked it up to my car charger with the audio out. Once reset it would work but then now I have more problems with mine. Still trying to figure out the glitches with this thing.

  • Cant get audio out from iPad airplay on optical audio

    I have an apple tv in school for streaming video of drama classes to big screen. Apple tv is plugged into HDMI on projector and i airplay the videos from iPad. My issue is getting sound - the projector has no speaker in it so no sound is currently playing. I purchased an optical audio to 3.5mm jack lead to go from the rear of the apple tv to a set of speakers on my desk. Nothing seems to be happening - will this setup just not work or is there a way for my classes to hear the soound as i airplay it?
    Any help GREATLY appreaciated!
    Thanks

    Where did you get the lead - it would ordinarily require a D/A converter between the optical connector and the 3.5mm jack...

  • Audio Out from iMac

    Hi there....on my iMac, suddenly I'm only getting audio out from the headphone jack at the back (which goes into my JBL Creature II's) on the RIGHT hand side. it does seem that suddenly the output jack socket has become defective....anyone else had this kind of thing?

    Try it with something else, such as iPod earbuds, to make sure the problem is not on the speaker side.
    Also, check System Preferences Sound pane Output tab to make sure the Balance setting did not get set all the way to the right side somehow.
    If it's still broken, try resetting the PRAM
    http://support.apple.com/kb/HT1379
    Speaker volume parameters are stored in PRAM.

  • Only getting audio out of one ear

    Only getting audio out if 1 ear on my mini. Both ears work on all other devices.

    EverclearFan,
    Did this soundcard come preinstalled in your computer? If so you will need to contact your computer manufacturer for support as the card may be OEM. OEM components are often modified from their retail standards and require special drivers that only the Vendor will have access to.
    Jeremy

  • I need to have audio out from HDMI and headphone jack simultaneously

    I need to have audio out from HDMI and headphone jack simultaneously.
    I seem to be able to select one or the other, but not both ? !
    Thanks

    No. You can only use one sound output:
    Why can't I select HDMI audio on my Mac mini?
    If you connect an HDMI display or television to a Mac mini (Mid 2010 or later), you might not be able to select the HDMI audio device (in System Preferences > Sound > Output). This can happen if you also have headphones plugged in to the computer. Unplug the headphones to be able to select HDMI audio.
    Mac computers: Frequently asked questions about using HDMI

  • I need to reset my MacBook pro to its 'Out of the Box' settings

    Hey All,
         I'm selling my MacBook pro and need to reset it to its 'Out of the Box' settings. I bought it at Best Buy and it came with pre-installed Mac OS X. It's up to date on software and whatnot. I'm selling it through Ebay ands thats why I need everything reset.
    It's a MacBook Pro from June 2012.
         - 2.5GHz Intel Core i5
         - 500 GB hard drive
         - 4GB Ram
    Thanks for the help!

    Follow the directions: What to do before selling or giving away your Mac

  • Vista x64, Dell Laptop Lately I have been getting audio ads from Lysol etc which I can stop by deleting the process plug-in container Iknow how to delete this process but why does the audio ad run despite the application of two well known antivirus progs?

    Vista x64, Dell Laptop Lately I have been getting audio ads from Lysol etc which I can stop by deleting the process plug-in container Iknow how to delete this process but why does the audio ad run despite the application of two well known antivirus progs?

    Oh, PLEASE IGNORE the line:
    deleted everything under HKLM\SYSTEM\CurrentControlSet\Enum\Root\SYSTEM (folders 0000 to 0004)
    That was left there inadvertedly. Can't seem to find the edit button here...

  • My MacBook pro 2012 Mountain Loin 8.2 don't clear the inactive memory automatically when memory needed for other program so I get page outs.

    My MacBook Pro 2012 Mountain Loin 8.2 doesn't clear the inactive memory automatically when memory needed for other program so I get page outs. There are much inactive memory when page outs. Why my mac does this?

    That's completely normal. If other programs require memory then the system will reallocate Inactive RAM as needed. Page Outs don't mean anything.
    About OS X Memory Management and Usage
    Reading system memory usage in Activity Monitor
    Memory Management in Mac OS X
    Performance Guidelines- Memory Management in Mac OS X
    A detailed look at memory usage in OS X
    Understanding top output in the Terminal
    The amount of available RAM for applications is the sum of Free RAM and Inactive RAM. This will change as applications are opened and closed or change from active to inactive status. The Swap figure represents an estimate of the total amount of swap space required for VM if used, but does not necessarily indicate the actual size of the existing swap file. If you are really in need of more RAM that would be indicated by how frequently the system uses VM. If you open the Terminal and run the top command at the prompt you will find information reported on Pageins () and Pageouts (). Pageouts () is the important figure. If the value in the parentheses is 0 (zero) then OS X is not making instantaneous use of VM which means you have adequate physical RAM for the system with the applications you have loaded. If the figure in parentheses is running positive and your hard drive is constantly being used (thrashing) then you need more physical RAM.
    Adding RAM only makes it possible to run more programs concurrently.  It doesn't speed up the computer nor make games run faster.  What it can do is prevent the system from having to use disk-based VM when it runs out of RAM because you are trying to run too many applications concurrently or using applications that are extremely RAM dependent.  It will improve the performance of applications that run mostly in RAM or when loading programs.

  • How do i get my music from ipod onto new computer when old computer died

    my old computer died unexpectedly and now i have a new one ...how do i get my music from ipod to itunes...i don't want to lose it since i have already paid for it...

    1). Connect your iPod to your new computer. If it is set to sync automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod.
    2). When your iPod appears in the iTunes source list change the update setting to manual, that will let you continue to use your iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default: Managing content manually on iPod and iPhone
    3). Once you are connected and your iPod is safely in manual mode there are a few things you can do to restore your iTunes from the iPod. iTunes will only let you copy your purchases directly from an iPod to the computer, you'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
    For everything else (music from CDs, other downloads and including iTunes purchases) there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. You can read reviews and comparisons of some of them here:
    Wired News - Rescue Your Stranded Tunes
    Comparison of iPod managers
    A selection of iPod to iTunes utilities:
    TuneJack Windows Only (iPhone and iPod Touch compatible)
    SharePod Windows Only (iPhone and iPod Touch compatible)
    iPod2PC Windows Only
    iDump Windows Only
    YamiPod Mac and Windows
    iPod Music Liberator Mac & Windows
    Floola Mac & Windows
    iPodRip Mac & Windows (iPhone and iPod Touch compatible)
    iPod Music Liberator Mac & Windows (iPhone and iPod Touch compatible)
    Music Rescue Mac & Windows (iPhone and iPod Touch compatible)
    iGadget Mac & Windows (iPhone and iPod Touch compatible)
    iRepo Mac & Windows (iPhone and iPod Touch compatible)
    iPod Access Mac & Windows (iPhone and iPod Touch compatible)
    TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
    There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
    4). Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync.
    5). I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay: Back up your iTunes library by copying to an external hard drive

  • Why doesn't my lightning to 30 pin adapter support any of my audio my from ipod touch 5th generation

    Why doesn't my lightning to 30 pin adapter support any of my audio my from ipod touch 5th generation.on my dock

    Have you contacted the dock manufacturer?
    The adopter supports audio if the dock manufacturer says the dock supports the 5G iPod.
    It may be that the dock does not work with iOS 6.x vie the 5G. Sometimes an iOS update will break compatibility.

  • I can't get my photos from ipod to pc

    i can't get my photos from ipod to pc.how i can get this?

    You'll likely need the assistance of some third party software such as the one below to get the job done.  Keep in mind that your photos will no longer be in their full resolution, but instead will be the scaled down thumbnail versions that were optimized for viewing on your iPod.
    http://www.macroplant.com/phonetopc/
    B-rock

  • How can I get HDMI out from my macbook air(2011)?

    How can I get HDMI out from my macbook air(2011)?

    It's rather simple. Buy a Mini DisplayPort to HDMI adapter. And then a HDMI cable long enough to link your computer the distance between both devices.
    Adapter
    http://store.apple.com/us/product/H1824ZM/A/Moshi_Mini_DisplayPort_to_HDMI_Adapt er?mco=MTY3ODQ5OTY
    Example Cable (buy longer one, if needed) You can these practically anwhere that sells HP TV's
    http://store.apple.com/us/product/MC838ZM/A?mco=MTY3ODQ5OTY

  • How can I get hdmi out from 2006 macbook pro?

    How can I get hdmi out from 2006 macbook pro?

    You will need something like this:
    http://www.amazon.com/DVI-HDMI-Cable-6ft-Male-Male/dp/B0002CZHN6/ref=sr_1_3?ie=U TF8&qid=1363820878&sr=8-3&keywords=dvi+hdmi
    Ciao.

  • How can i get thes songs from ipod nano to the itunes libary??

    hi
    i have ipod nano and i sync it with over 500 songs .....my bad i lose all that songs on my libary  .... how can i get thes songs from ipod nano to the itunes libary??

    See this older post from another forum member Zevoneer on different ways to copy content from your iPod to your computer.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

Maybe you are looking for

  • Getting error while trying to open the b2b console

    Hi All, I have installed weblogic server 10..3.1.0 and SOA 11.1.1.1.0. After installation I started the admin server and managed servers. While trying to open b2b console after login I am getting the following error message access denied (oracle.secu

  • Error while applying support packages

    Hi, I was applying support packges for NW 7.0 EHP2 for the components SAP BASIS/ABAP/PI BASIS & BW,  the support package level was 02, I have downloaded 03,04,05,06 for all the above four components.  While updating spam/saint update I got the above

  • How do I bring Sony F3 footage into Final Cut Pro?

    Hi, Would love some help here. I know the file are supposed to work well in FCP, however i dont have the plug ins. I tried to convert the files to pro res 422 using mpeg streamclip, but that didnt work either. would love some advice, thanks

  • Macbook pro folder with question mark

    I am working on a neighbors macbook pro here. When I startup the laptop, a folder with a question mark appears. It will not go away and nothing else happens. This laptop was working fine until bootcamp was installed, then he erased all the contents o

  • Where is the "Motion Tracking Mode" button in PE11?

    In PE10 by clicking "Motion Tracking Mode" button i can add a tracking object and click "Track button" to create keyframes.  Cannot find this function in PE11.  Actually i need to blur patient's eyes and nose.  The goal is to show lips and neck movem