Need to reset every time I turn iPod on

For the past day every time my standard 20GB
click-wheel iPod has turned off, both from me
manually doing it and inactivity, I need to reset it
to get it to come back to life (that is, hold the
menu and select buttons). It's almost as if it is
freezing every time it is off. Has anyone else come
across this problem before and would be able to
assist me in this matter? It's pretty frustrating.
Thanks very much.
-Robert
Mine has done the same thing for about 2 months and there dosent seem to Be ANY help from Apple OR Ipod at all on any thing it seems that once thay have our money then thay dont want anything to do with us at all so it seems that the only thing we can do is to NEVER buy A another apple product I hve been trying to get some help with this since I bought my I pod New and I cant. ALL I WANT IS THE THING TO WORK LIKE IT IS SUPOSED TO IM Tired of the poor support....
hi end lapto Windows XP

Similar Messages

HP Pavilion Dv6 3125ej needs "hard reset" every time when turning on

I have an issue that each time after the compuer shuts down, the first startup stucks on black screen. I have to do hard reset and only after the windows comes up.any ideas how to solve it? I've already checked my BIOS version and it's the latest one (F.29)

You need to do a clean install of Windows on it. The hdd has drivers for completely different hardware. Too bad you didn't make your Recovery disc set. It would restore the hdd to HP with all drivers/software installed. That would depend on if the hdd is at least the same capacity or larger than the original. Recovery Discs balk at a smaller capacity hdd. You can order Recovery Medai for about $16: https://h10025.www1.hp.com/ewfrf/wc/mediaOrder?cc=us&lc=en&productOid=5173064&softwareitem=656000-002 ================================== If you can read the 25 character Microsoft Windows 7 license key, you can download a Windows 7 ISO file to burn to a DVD or USB flash drive. The version must match version that came installed on your PC as listed on the Microsoft COA sticker attached to bottom of laptop. Such as Windows Home Premium. Link to the Windows 7 ISO file downloads: http://getintopc.com/softwares/operating-systems/page/9/ You can use the Windows 7 USB/DVD installation tool to convert the ISO file you download. Link and instructions below. You need a DVD+R or DVD -R . Or a 4 GB flash drive to use the USB method. http://www.microsoftstore.com/store/msusa/html/pbPage.Help_Win7_usbdvd_dwnTool#installation

Need to restore every time I connect iPod?

My iPod (new nano, v1.0.1 software) works just fine. Plays music like a champ. iTunes (7.4.3.1, WinXP) works as expected, too. However, every time I connect the iPod, iTunes declares that it is in recovery mode and needs to be restored before it can be used w/ iTunes. It restores just fine, but I'd like to be able to bypass this step.

Have you had a chance to look at this troubleshooting page? If not, have a look at the bottom section that covers what to try if the message keeps reappearing: iTunes has detected an iPod in recovery mode - Use iTunes to restore

I recently updated my MacBook Pro and now it says I need to restart every time I turn the computer on. It is on a grey screen.

I have not used my MacBook Pro for a few months and when I started it up did all the microsoft and system updates. Now it will not turn on and it goes to a grey page that state "You need to restart you computer. Hold down the Power button untilmitmturns off, then press the Power button again." I have done this several times and keep arriving at the same page.

OK, then there is little else to do other than to reinstall OS X.
Make sure you removed everything connected to the MBP including any USB devices.
If your Mac came with a System Install DVD, then insert it and hold the c key while starting your Mac. This will boot from the DVD instead of your internal disk.
If you find the grey screen reappears then it may not have restarted from the disc, so try again. You have to get past this step to do anything. If you can't, the problem may be a dirty or damaged DVD or an inoperative optical drive.
When it gets to the Mac OS C Utilities screen, select Disk Utility and repair your hard disk. Record any errors that it finds, since your problem may be due to a failed hard disk. If that is the case, the failure will probably arise again.
Then, reinstall OS X. Reinstalling is non-destructive to your user accounts or data.
If your Mac is running Lion, or Mountain Lion, you can boot OS X Recovery and perform all the above without a disc.
Read about OS X Recovery here: http://support.apple.com/kb/HT4718

I set up Airport wireless, but I miss something my network can not be found and I need connect manually every time with my ipod?

I have problems finding my connection, I configured the Airport Express Internet is ok the light is green, but always need to connect manually , when I look for my network never show??What I need change ????

Modem -> Router -> Airport -> Wireless DHCP
                  |
                  |
                 V
            Work PC's Static Ip's
It would be a requirement that the wireless connections were on a seperate network that could not see any of the work PC's
Everything depends on the router ..
If the router offers vlan.. then you can set the airport to a different vlan than the Work computers and it will work fine.. But your setup currently is such that wireless clients behind the airport even if they get a different IP address range would still be able to access the work PC's.
Another possible method is to use secondary IP address in the router.. this is same idea as vlan really but some routers offer IP alias.. or secondary IP.. it has a number of names.. This would not fully protect the computers on the main IP address range but via firewall in the computers will effectively do so. It would be important to make sure the local firewall is setup and running.

I need an application which turn off wifi automaticly when my Ipod Toch is locked (for save battery charge), i hate every time to turn it off manually please help ASAP!!!

I need an application which turn off WiFi automaticly when my Ipod Toch is locked (for save battery charge)
I hate every time to turn it off manually when I go sleep please help ASAP!!!
If I forget to turn of wifi on my device after my 8hour dream it's battery will be discharged. and ofcourse alert do not ring. pls help urgent!!!
Thanks

Suggestion:
Turn off your device before bed.

HT1414 why does my iPhone 5s shut down unpredictably and needs to be reset every time to start back up?

why does my iPhone 5s shut down unpredictably and needs to be reset every time to start back up?

Hi Cyprus11,
Thanks for visiting Apple Support Communities.
If your iPhone is shutting down unexpectedly, I recommend going through these troubleshooting steps:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Best,
Jeremy

After having to reset my Zen Vision M, it now rebuilds the library every time I turn it

My Vision M froze on me about a month ago, and I had to reset it to get it to turn off and back on. When I reset it, it went through the whole Rebuilding process, and then was on again. But half of my music was missing. And now every time I turn it off and turn it back on, it goes through the rebuilding process.
Is there a way to make it stop this. I use it in my car, and every time I get in, I listen to the radio while it's rebuilding. And then I end up forgetting that I even have it with me. Having to wait a few minutes to listen to my music, when I usually only have a little more than a few minutes to listen to music when I use it on my way to and from work, makes it nearly useless.
If I format it back to factory settings, will it fix this issue? Or am I just going to need a new MP3 player? Those Zen Vision W's sure do look really nice. But I don't have the money for that. I'd prefer to just find a fix for this.
Thank you for your help.

MonkeyPeaches,
It could help to update the firmware, and try the Clean Up option in the Recovery Mode menu:
http://forums.creative.com/creativel...p&message.id=3
Hopefully that Clean Up option should clear that problem for you. If it doesn't, it might help to do a full format of the unit before you transfer music back to it. That will remove everything on the player though, so back your music up if you haven't done so already.
CatMessage Edited by Catherina-CL on 0-28-2008 2:26 PM

I need help. every time i turn on my laptop an error message pops up: the procedure entry point sqlite_wao -checkpoint could not be located in the dynamic link library SQLite3.dlll HOW DO I FIX THIS?

i need help. every time i turn on my laptop an error message pops up: the procedure entry point sqlite_wao -checkpoint could not be located in the dynamic link library SQLite3.dlll HOW DO I FIX THIS?

Hi whatsthe77,
Welcome to Apple Support Communities.
You may want to follow the steps in this article to reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Have a great day,
Jeremy

Audio output settings reset themselves on restart to internal speakers. I am getting tired of changing the output every time I turn on the Mac. This is a recent problem.

My sound preference does not retain its output setting on restart. It resets to internal speakers. I'm getting irritated having to change it every time I turn on the Mac. I'm running the latest system software (10.10.2) on an early 2008 Mac Pro with 4 cores and 6 GB of RAM. This was not a problem before Yosemite, and everything else seems to be running fine. Any help appreciated.

Does not retain system sound preference settings

Need to setup wireless Mighty Mouse every time I turn it on

I have recently purchased 2 wireless Mighty Mice (Mouses?), one for home and one for work to pair with the same laptop. After I bought the first one, I used it for a few weeks and it worked great. It paired when I turned it on every time.
Now I have purchased a second MM for work and I have to pair each of the MMs every time I turn one of them on. When I open the Bluetooth setup assistant to re-pair the MMs, the MMs are listed with the names I have given them, so the computer "knows" about the MMs. I have a wireless keyboard, too, and that pairs when I turn it on with no problems.
Any ideas?

Here's a theory, take it for what its worth:
I think when one device pairs with the computer, the computer understands that that is the mouse. If you're switching between locations, it keeps looking for the last one it paired with. Try taking the same mouse in both locations and see if the problem goes away.

Why does iTunes delete my library every time I turn my computer on? All my music is still on my computer but when I open iTunes it comes up with the scan media page. I have to redo my playlists and it takes forever. Can someone help??

Every time I turn my computer on and open iTunes all my music is gone, if comes up with the scan media page, all my playlists have been deleted. All my music is still on the computer and in the files. I don't know why it keeps doing this, it's really annoying as I have loads of music and then have to do my playlists again just to sync my phone. Can someone please help??

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be copied and renamed asiTunes Library.itl to restore the library to an earlier state. Look for a recent .tmp file that is similar in size to the .itl files in the Previous iTunes Libraries folder. If it has happened repeatedly you may want the earliest such file generated since the last iTunes upgrade.
If applicable, see iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device. Even if you have the media you can use selected steps from the tip to ensure that you don't lose settings and data from the device as a result of switching libraries.
A large number of users with this issue have been using AVG Anti-Virus which appears to be implicated in the problem. AVG have released a patch which might help, so if you use AVG then I would update that first. I'd also be interested to know which AV you use in case others may cause similar issues. I recommend excluding the iTunes folder from any real-time and scheduled AV scanning process. Another possible cause could be automatic backup tools.
tt2

I lose my Wi-Fi network settings every time I turn off

Hello, and thank you for your time. Just bought my iPod Touch yesterday, and am loving it.
One problem I'm having, though. I can't keep the settings for the network I want to use.
I configured my router's network on it. Put in WEP and the security key. I was connected to Wi-Fi just fine, no problems.
Then I turned the iPod off. When I turned it back on, even though the iPod is configured with the router (which is on private network, so my "lovely" neighbors don't leech off it), my network disappears. My PlayStation 3 that I'm not using for a network appears every time I turn on and off. But, every time I turn the iPod on, I have to put in the information for the network I want to use (name, security, password) all over again.
Any help is greatly appreciated. Sorry if there's an answer here already and I missed it. Thank you.
Walter

You need to select to "remember" the access point so it automatically reconnects unless by "private network" you mean that you're not broadcasting the SSID. If that's the case, it won't reconnect automatically-it's a feature, not a bug. My advice, broadcast the SSID and set a strong password. Hiding it doesn't do much for you from a security standpoint. Setting a 40 digit random password does.
If this doesn't work, do a Restore.

HT201365 Now that I have upgraded to iOS 7, how can I make it so that I don't need a password every time I use my iPad?

Now that I have upgraded to iOS 7, how can I make it so that I don't need a password every time I use my iPad?

In v6 airport utility "Join a wireless network" is not available once the TC is setup.
You must reset to factory and try again using the selection options.. and it can fail or not come up.. This is an extremely poor way to setup a TC.. and you should NEVER EVER DO IT.. that is why apple removed it. Since you are joining wireless it makes no difference where the TC is located.. since it would become a dumb AP and turn off its ethernet ports.
Place it right next to your main modem router, plug in by ethernet, and select bridge mode and create a wireless network. Never use Join a wireless network..
However for completeness here is the method.
How do I setup my time capsule with wireless internet?
Never ever do it.
If you need internet by wireless and backup to the TC.. then simply plug the TC directly into the Mac.
Run dual network.. Setup explained here.
Using Time Capsule hardwired to Mac for back-up only.

Why do I have to select my network using Network Diagnostics every time I turn on my MacBook Pro and go to Safari?

Every time I turn on my MacBook Pro, before I can use any programs that access the internet (i.e. iTunes, iBank, etc), I have to go into Safari where it prompts me to perform network diagnostics. (I use a wep encrypted wireless network.)
During network diagnostics, I select my network and at some point it tells me that my network appears to be working properly and then defaults to the Apple.com webpage. I then Quit network diagnostics and exit Safari and then I am fine to do whatever I need to in the other programs.
This is quite annoying and I wish it would just remain on my network without me having to do this every time I turn it on. Is there some thing I can do or some setting that I am missing that would allow me to avoid this?

Is your network hidden? See:
WiFi, Internet problems, possible solutions
Secure your network
WiFi security issues, at home and WiFi hotspots
Change the name of the network and the password, then connect manually and when it asks to save in Keychain do so.
If it's still giving problems and it'a not the router, it's the computer, then go through this list.
Step by Step to fix your Mac

Need to reset every time I turn iPod on

Similar Messages

Maybe you are looking for