Need to reset password for digital ID to sign doc in Adobe Reader on thinkpad using Windows

Hi,
I need to reset (or find) my password for the self-signed digital ID I created in order to sign a doc in Adobe Reader using Adobe Echosign software. I'm currently on my laptop (thinkpad) which uses Windows. How do I do this?
Thanks

Unfortunately, only you can remember your password for a self-signed digital ID. No one can reset or find it for you.

Similar Messages

Need to Reset Password for Partental Controls

I need to get into Parental Controls to make changes and I don't have my password. What can I do? My password hint is not of any help.
Thank you,
Kat

What is the model number of your router?
If you have Linksys E series or valet router and you are using Cisco connect for parental control then you will need to reset the router and reinstall the Cisco connect. See this link.

I can't remember my password for wifi on iphone 4. I'm with ATT and using windows 7 on my ps. Can anyone help?

Hello, can anyone tell me how to get into wifi. I don't remember my password. I had to do a network reset and it lost my password for wifi. I'm running ios5.
Thanks,
Gary

What router are you using? If it's a linksys go to your browser and type in 192.168.1.1 and then browse for your wireless security password/or reset it.

Need to reset password for firmware on 2006 A1181 model

My mack book laptop, ser #A1181, has a firmware or administrator password i want to bypass. I have a copy of osx snow leopard here to replace it. When i fire it up, all i get is the, This computer needs a password to start. This was my mothers computer before she passed away.

I believe the only people who can help you with a firmware password would be Apple - I suggest making an appointment at your nearest Genius Bar. The advice/diagnosis is generally free (unless a repair is necessary).
FWIW, the Snow Leopard you have must be a retail version; if it is a machine specific version, it will not work on any other Mac.

Can't get email, need to reset password?

Need to reset password for email, how do I do this

Go to Settings > Mail, Contacts, Calendars
Find your account and change its password there.

NEED BIOS BACKDOOR PASSWORD FOR HP PROBOOK 6540b. Have tried all types of bios resets, no luck.

NEED BIOS BACKDOOR PASSWORD FOR HP LAPTOP PROBOOK 6540b. Have tried all types of bios resets, doesn't work.
The password stay's no error code for entering wrong ones.

Hi,
I too have been pulling my hair out with this problem on the 6540B. However after 2 days of various driver combinations I've finally found a working fix. I don't have the luxury of reinstalling Windows XP as the machine is custom configured with apps which will take over a week to configure again.
If you've got no audio it's probably because you've installed the IDT High Def Audio Driver. You may have tried a whole bunch of other options also to try and rectify the problem as I did.
The solution is fairly simple:
Goto to add/remove programs and remove "SoundMax".
Reboot
The audio driver may try to reinstall on boot up... allow it to install. It will still not work and will still show exclamation mark against IDT driver in Device Manager.
Goto run... then type regedit and hit enter. Windows registry opens.
Goto My Computer>HKEY_LOCAL_MACHINE>SYSTEM>CurrentControlSet>Services>
Delete the WHOLE KEY for AEAudio and then exit regedit
Go to device manager and uninstall the IDT High Def Audio device from Device Manager
Then using the original HP Application and Driver Recovery DVD supplied with the notebook, run the autoplay, choose Hardware Enabling Drivers, tick only the IDT High Def Audio driver and follow the installation instruction on screen. You will be prompted to reboot after which Windows will find new hardware. The IDT will install itself and you will find that the sound works!
Good Luck!
For those that cannot find their original disk, the IDT Audio Driver from the original disk is available at http://tinyurl.com/IDTAudio6540b or http://www.4shared.com/file/RxXn5afj/IDTAUDIO.html

TS1543 my mac wont stop at single user it continues to root, how can i get to single user to enter info needed to reset password

I my mac wont recognise my password, i have tried to reset password using single user but my mac wont stop at single user it just continues to root, how do i get it to stop at single user so i can add info needed to reset password?

Are your sure that wasn't a Verbose boot (Cmd-V) you were trying? That would go on to a regular boot.
Try a PRAM Reset, then try the single user, Cmd-S, at the startup chime. For the PRAM Reset, hold down Option - Cmd - P - R all together until it chimes a total of three times, then let go to finish booting.

Is it possible to reset password for any user using abap program

Hi friends,
Is it possible to reset password for any user using abap program by specifying client number and user id. in selection screen.
if any code for that to reset password please mail me.
Thanks & Regards,
Yogesh

Hello Yogesh,
Yes you can reset the password for any body using ABAP Code. But for that you really don't need any client number.
If this process is on regular basis, then recommended is to use BAPI for changing the user details Otherwise BDC also works fine.
=> Function Module - BAPI_USER_CHANGE
Call this in the program for resetting the password.
=> CALL TRANSACTION 'SU01' USING InternalTable
This will be executed in the BDC of SU01 transaction recording. Use the Password Change button in the application toolbar of transaction while recording.
Hope this helps.
PS If the answer solves your query, plz close the thread by marking it solved and rewarding each reply.
Regards

I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?

I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?
I have a 2012 mac book pro can I use that to connect with firewire and load osx that way? and how woudl I do that?
Thanks so much!

To what password are you referring? Do you mean your user account's admin password? Or do you mean the master password for File Vault or do you mean a Firmware Password?
For an admin password:
Forgot Your Account Password
For Snow Leopard and earlier
     Mac OS X 10.6- If you forget your administrator password
For Lion/Mountain Lion
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see Reset a Mac OS X 10.7 Lion Password and
     OS X Lion- Apple ID can be used to reset your user account password.
If you cannot do the above then try this:
1. Boot to Safe Mode by restarting and after the chime press and hold down the COMMAND-S keys until a black screen with white type appears.
2. At the prompt, type the following commands pressing return after each command line:
     /sbin/fsck -yf
     If you do not receive a "Filesystem OK" message then repeat this command until
     you do. If after seven tries you still do not receive a "Filesystem OK" message,
     then the system is corrupted and needs to be reinstalled.
     mount -uw /
     cd /private/var/db/netinfo
     mv local.nidb local.old
     rm ../.AppleSetupDone
     shutdown -r now
The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
How to reset the OS X password without a startup CD:
Reboot into Single-user Mode. Enter the following and press RETURN after each command line
   1. Type fsck -fy
   2. Type mount -uw /
   3. Type passwd <username>
I have never tried this method myself.

I need to find password for time capsule network

I need to reset password which i lost for Time Capsule

It should be in the keychain in your Mac.
If not reset is the only option.

How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?

Hi,
How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?
I tried with acual method as below from client '000':
DELETE FROM USR02 CLIENT SPECIIED WHERE BNAME = 'SAP*' AND MANDT = '001'.
After this when I tried to logon '001' using SAP* with password PASS it is giving the message that Incorrect logon and password.
(Also when I checked for 'SAP*' in 001 it looks like it is not got created as I queried as below:
SELECT SINGLE * FROM USR02 CLIENT SPECIFIED WHERE BNAME = 'SAP*' AND MANDT = '001'.)
Can anybody throw some light on this? RewardS is guranteed for solutions!
-B S B

Hi again:
I forget to tell.
You must restart the system. So, that a new user with the name "sap*" gets generated with password "pass"
Hope this wil help,
Eric

Use of active directory userid/password authentication instead of SAP R/3 User/Password for digital signature?

Dear all,
I am looking to setup the use of active directory userid/password authentication instead of SAP R/3 User/Password for digital signature. We SSO to the backened ABAP AS via an SAP NW Portal to which SPNEgo kerberos authentication is setup. Today we specify R3 user id/password to digitally approvae a lot release. The idea is to have users maintain one AD password and don't have to remember the R/3 password anymore and also our Security team to avoid password maintenance.
I know there are 3 options for digital signature and
System signature with authorization by user ID and password (We use this currently)
Digital User signature with verification - (We would like to use this with AD userid/password, so the system still ask the users their AD userid/password for the authentication when they try to "sign" a document.)
User signature without verification
Do you think there is a way to configure the system in order to ask and check the active directory userid/password instead of SAP R/3 password? Where can I found documentation about it ?
I have several different versions of AS ABAP starting from NW 7.02 to NW 7.31.
My active directory is based on Windows 2008.
Thanks in advance!!
Dhee

Actually enabling Kerberos for SSO purposes and enabling Kerberos for digital signatures are two different topics although the latter is because of the former. I'm interested in the topic as well and I'm currently looking at different options. SAP provides a BAdI for the digital signature API which can be used for external authentication but they do not provide the solution to invoke Kerberos authentication based on username and password. SAP provides a semi solution with NWSSO 2.0 SP2 which works only on Windows with classic dynpros meaning SAP GUI for Windows is assumed. The solution is based on an ActiveX component which does the actual Kerberos authentication using the Secure Login Client which is part of the NWSSO suite. Extending that implementation to non-Windows and non-GUI applications would require some sort of web enabled service that could be used to authenticate the user with username and password. In case authentication is successful, a Kerberos token would be returned to SAP which would then be validated. All the required pieces are there since SAP has Kerberos support now in both stacks of the NetWeaver Application Server, some bits are still missing though which leaves customers looking at 3rd party or custom solutions.

How to reset password for user sap*

Hi friends,
How to reset password for user sap* if any solution please mail me.
Thanks,
Yogesh

Hi,
<b><u>Steps for Reset SAP* Password</u></b>
If you forgot or lock "Administrator or J2EE_ADMIN" password just follow below steps:
STEP-1: Enable "SAP*"
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2.Goto cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
3.Double-click on the property "ume.superadmin.activated = TRUE"
4.Double-click on the property "ume.superadmin.password=<Enter any password ex: abc123>"
5.Save.
6.Restart the engine.
STEP-2: Login with "SAP*" into portal
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / password as" SAP* / <password ex: abc123>"
3. Search for "Administrator" user
4. Reset or change password for "Administrtor"
STEP-3: Disable "SAP*"
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2.Goto cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
3.Double-click on the property "ume.superadmin.activated = FALSE"
4.Save.
5. Restart the engine.
STEP-4: Login with "Administrator"
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / Password as "Administrator / <password>
3. it will ask change password just change it.
Please follow steps one by one. it should resolve your issue.
Thanks,
Nagaraju Parlapalli

How to reset password for a web user via GUI?

Hi,
How to reset password for a web user ID via GUI? is it possible?
Thanks.

Hi,
You can reset the pwd for the user through trascn SU01.
BR,
Disha.
*Pls reward points for useful answers.*

How to reset password for iomega storecentre ix2

hi! how to reset password for iomega ix2?

There is a pin hole reset button on the back. This will reset user and network settings. Here is a link to the directions.
https://lenovo-eu-en.custhelp.com/app/answers/detail/a_id/32232/kw/reset

Need to reset password for digital ID to sign doc in Adobe Reader on thinkpad using Windows

Similar Messages

Maybe you are looking for