Need to reset printer everytime i log in
Good day!
I ready need some help here.
I'm using the Printer Espon stylus C65_usb.
Every time I start the computer, I always need to "reset printing system" at printer setup utility before adding the Espon printer and Adobe PDF 7.0.
Is thay some kind of bug after i update to 10.4.11
and also, can i update my memory to 2 GB (1G each slot)
Thank!
Message was edited by: An_D
Your issue technically does not really belong in the 'getting online and networking' section of the forum as your printer is a usb printer.
And also your in the 10.5 section of the forum. You state in your post that your using 10.4.11
Try posting your issue here Tiger Printing and Faxing
Similar Messages
-
Moved country need to reset printer back to UK ink codes
Hi I bought my Photosmart C7280 in the UK i then moved to Australia had my printer reset by HP so i could buy the ink instore and now i need to put it back to UK settings i know you have to get into the printer preferences and then into the next screen which has for use with support assistance only with 5 boxes on the top row with numbers 41 - 45 and 1 box below numbered 51 can anybody give me the numbers and also the id ref i need as i do not want to throw the printer out as it has always been good.
Please help. TrudyHi,
If cartridges are in warranty you should get support, please refer link below about the same.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02558798&cc=us&dlc=en&lc=en
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution" -
Need to reset NVRAM everytime to boot.
Pushing the power button doesn't work. I could hear the chime
but all I got is the dark screen, no grey screen, let alone
seeing the Apple logo.
Tried reset PRAM, and ran the hardware test showed everything
is noraml (At least that is what the test said.)
Reset the NVRAM (command->option->p>r) boot successfully but
really it is annoying and indicating something is not right.
Any ideas? Thanks.
Week 21 build.
Oh, the it happened right after I upgrade with the 10.4.7
combo.Could I repair the
startup disk by running the Disk Utility already
installed in
the machine?
No, you would have to be booted from it. You could try running fsck to check/repair your hard drive.
1. Reboot/Startup holding your Command-S key down.
2. At the command line type the following and hit 'Return.'
/sbin/fsck -fy
3. After it has check/repaired your disk, type 'reboot' and hit 'Return' again. Unit should bootup normally.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
An Apple User Group -
hi there, i've just finish our schools year book (voluntarily) and it has 155 pages incl. front/backcover. This file has 1800 links a lot of photos and a few reports. everytime i go to save as PDF it freezers on page 66. i need the book printed in hi-res? im running out of "printing time" as we need it back to school by 10th december for 12th December distribution.
what do i do? if i save it in low res pdf everything will be a blur...can someone please come to my rescue. i have a
OS X version 10.8.2,
Processor: 3.06 GHz Intel Core 13,
Memory 4 GB 1333 MHz RAM
Startup Disk is Moutain Lion
my file is about 24 GB I Purchased a 32 GB USBA stik to save and send to printers.
PDF made easy assistance please anyone out there....?I do not have InDesign so I can't help you there.
Here is an article from Adobe:
http://helpx.adobe.com/indesign/using/exporting-publishing-pdf.html
Export an open document to PDF for printing
Choose File > Export.
Specify a name and location for the file.
For Save As Type (Windows) or Format (Mac OS), choose Adobe PDF (Print), and then click Save.
When you select the Adobe PDF (Print) option, you cannot include interactive elements in the PDF. To export an interactive document to PDF, see Create interactive documents for PDF.
Do one of the following:
To use a predefined set of job options, choose a preset from the Adobe PDF Preset menu.To create a PDF/X file, either choose a PDF/X preset from the Adobe PDF Preset menu, or choose a predefined PDF/X format from the Standard menu.To customize options, select a category from the list on the left and then set the options.
For Compatibility, choose the lowest PDF version necessary to open the files you create.
Click Export (Windows) or Save (Mac OS).
To reset options to the default, in the Export Adobe PDF dialog box, hold down Alt (Windows) or Option (Mac OS) and click Reset. (The Cancel button changes to Reset.) -
i dont know why but everytime i plug in my ipod touch it needs to reset, i cant even use it now. any suggestions?
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Above is from the same article I provided above. -
Need to reset everytime I try to connect
Infitinity is working fine on my main computer, but everytime I try to connect on any laptop I need to reset the Hub to get it to connect. I've tried several laptops and all have the same issue. On my phone it connects intermittently but a reset doesn't work with it.
This has only been happening in the last week, nothing has changed over that time to have started it though.
Any help would be appreciated,
Thanks
Solved!
Go to Solution.Thanks.
I think I've actually found the problem, it seemed to be an issue with my new phone (BlackBerry Torch). The problem only started when I got the phone (I didnt mention it as I didnt think it was even possible to be an issue!), I returned it yesterday to get a different BB and since then I have had no issues. -
I deleted my old email account and when i went to change everything on my iphone it still shows the old email even though i created a new apple id. I also can't remember the password and now can't access icloud. Do i need to reset the phone?
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do. -
"no printer selected" unless i reset printing system
My printer is never recognized unless i go into the printer setup utility and click on "reset printing system" Then i wait for the utilty to find my printer and i can print. Everytime i shut off my computer, i have to reset the printing system in order to use the printer.
Does anyone know the solution to this problem?1 back up your stuff to an external drive if at all possible. Use something like Carbon Copy Cloner or SuperDuper!.
2 get out the system CD or DVD which came with your system, or the retail copy of OS X which you bought separately if you upgraded your system software with a newer version of the OS.
3 boot from the CD or DVD noted above by inserting it into the optical drive and restarting holding down the 'C' key.
4 select 'Install' from the options at startup. The system will tell you that you need to change some options to do an install. Tell it yes. You will be presented with a list of options, one of which will be to do an erase install (which will erase your drive and you'll have to move over all your stuff from your backup, you did make a backup, didn't you?) and one of which will be an archival install, which will move your current system files into a folder named Previous Systems and which will install a brand new system. Select archival install.
5 once the install is complete, restart your Mac on the internal drive, and verify that all is well. You can move items you want to keep from the old system, such as fonts, over to the new system and then toss the Previous System folder into the Trash. -
I got to uninstall and reinstall flash player everytime i log on for it to work....
i got to uninstall flash player and reinstall everytime i log in to my fb games...and yes i restarted pc before reinstall???????????
Hi Rob,
Could you please do the steps listed in the following post? We're trying to figure out what's going on with this but need additional information.
http://forums.adobe.com/message/4311497#4311497
Thanks,
Chris -
Alright so here is the issue. When I first started using iTunes I created my AppleID. I locked it in to remember my password and authorize my computer so that I would NEVER HAVE TO ENTER IT AGAIN. So years pass, no problem. Then "ITUNES 11" come on everyone lets upgrade or you can't proper use the iTunes Store. Seriously it wouldn't let me access the store. Go Figure. So I upgrade simple right? No. It really isn't when iTunes 11 rolled out it was riddled with minor bugs that made the experience annoying so I did a rollback and live without the store for awhile.
About a year passes and I try again this time upgrading iTunes through a COMPLETE fresh install, again I did what had done the first time I logged my AppleID and reauthorized my computer. Hurrah other than getting use to the new UI it ran perfectly. Yes Finally! Right? Again.... No. No more than 2 or 3 software updates later suddenly my password for my AppleID is incorrect I was like "Okay?" and re-entered it thinking the big update cleared my settings.
Wrong Password please reset password to continue using the iTunes store.
I was like okay maybe the user agreement change and we all need to reset passwords and re-accept the EUA. So I go through the process to create a new password successfully and reset my AppleID in iTunes with the new password. Come back a few weeks later it happens again this time I enter my new password and what do I get?
Wrong Password please reset password to continue using the iTunes store.
So I first do a repair install to my iTunes than reset my password this time NOT setting it to remember password. Great everything works fine again password even matched my Home CompID so that I could NEVER lose it well come a few days later I try to use the store and what happens?
Wrong Password please reset password to continue using the iTunes store.
to try to make my Long story a little shorter....
This has been going on for the better part of 3 years I have almost completely dropped iTunes which has the better store library for Goggle Play Music who's store library isn't even a third the size iTunes has because their system works and my log-in is my e-mail. I repeatedly completely uninstalled iTunes and wiped it from my registry in hope a clean install would fix the problem but it never does.
My OS is Vista Home Premium Edition 32-bit and no picking on my OS I been working to get a new computer but that isn't happening anytime soon so I work with what I got.Even removing the .xml files doesn't make a difference. Also, I now installed another update of iTunes, but still having the same problem, and this time there are no .xml files or preference files whatsoever in the Application Data and Local Settings\Application Data iTunes folders. It seems like for some reason iTunes is unable to create these. What should I do?
-
We are trying to implement a process so that any document that needs to be printed through our Java application will be printed as PDF using Adobe Reader.
For which, We created and execute the below command line to call Adobe Reader and print the PDF on a printer.
"C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe" /T "\\<Application Server>\Report\<TEST.PDF>" "<Printer Name>".
Current Situation: The above command line parameter when executed is working as expected in a User's Workspace.
When executed in a command line on the Application Server, it is working as expected.
But, the same is not working while executing it from Deployed environment.
Software being used: 1. Adobe 11.0 enterprise version. 2. Webshpere Application Server 8.5.5.2.
Please let us know if there is a way to enable trace logs in Adobe Reader to further diagnose this issue.This is the Acrobat.com forum. Your question will have a much better chance being addressed in the Acrobat SDK forum.
-
We are trying to implement a process so that any document that needs to be printed through our Java application will be printed as PDF using Adobe Reader. For which, We created and execute the below command line to call Adobe Reader and print the PDF on a printer."C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe" /T "\\<Application Server>\Report\<TEST.PDF>" "<Printer Name>". Current Situation: The above command line parameter when executed is working as expected in a User's Workspace. When executed in a command line on the Application Server is working as expected. But, the same is not working while executing it from Deployed environment.Software being used: 1. Adobe 11.0 enterprise version. 2. Webshpere Application Server 8.5.5.2. Please let us know if there is a way to enable trace logs in Adobe Reader to further diagnose this issue.
This is the Acrobat.com forum. Your question will have a much better chance being addressed in the Acrobat SDK forum.
-
Need password reset for HP LaserJet M1536dnf MFP the same as others on this forum.
I have the same M1536dnf password problem here, I can't access the settings.
I can't activate the duplex mode without it.
ThanksHi @HPFix7,
I see that you need the reset for the printer. I can help you.
I can send you that information in a private message.
In the forum beside your handle name just click on the envelope to view it.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Need to reset Admin password to my Envy 4360 AIO Offiejet
I have an Envoy 4360 Wireless AIO Officejet eprint printer that I need to reset the Admin password upon in the contrl panel if possible . Forge my Admin password that I set through the Web Portal, using in MAC OS X Yosemite 10.10.4 Any help will be appreciated! Rickll110
Hi , Welcome to the HP Forums! I noticed that you need to reset the Admin password to your HP Officejet 4630 printer. I am happy to look into this for you! I would recommend to restore the network settings to the default settings: Press the Wireless button to access the Wireless Status
menu.Press the button next to Settings to access the Wireless
Settings menu.Select Restore Defaults.Confirm the selection to restore defaults. You should then be able to login in with username: admin and the password is left blank. For future reference, here, is your printer's user guide. Hope this information is helpful, and thank you for posting! “Please click the Thumbs up icon below to thank me for responding.” -
Needed a code for Creating a Log File in java so that its size is limited
Hi
I need the code for developing a log file using threads so that the log file size is limited
and if the size of the log file is increasing above 1Mb,another log file has to be created automatically and the log have to be printed into that new file.
Thanks in advancepackage cms.web.log;
import java.io.*;
import java.util.Calendar;
import cms.web.WebUser;
* Log is generated by JEditor 1.0.0
* @Project : cms
* @Version : 1.0.0
* @Created date : 11:07:40 PM Thursday, 25/07/2002
* @Author :
* @Organization :
* @Copyright : (c) 2002
* An utility class used to write information, especially error messages, to
* log file so that they can be viewed at later time by administrators.
* Extra information such as date & time they occures & where they are thrown...
* are automatically included and append to the end of log file.
* Log files will increase with the format "name_n" where n is file counter
public class Log implements Serializable
* logs marker
static final String START= "\n\0";
* parent directory that contains log files
private static File parent;
private PrintStream out;
private String name;
* to count how many log for the current stream
int counter;
* maximum number of logs for each log file
int max;
public static void init(File parent)
if (!parent.exists())
parent.mkdirs();
Log.parent= parent;
public Log(String name, int max)
this.name= name;
this.max= max;
file= getLastFile();
counter= countLogs(file);
out= openStream(file);
public synchronized void appendLog(String log)
if (log == null || log.length() == 0)
return;
count();
try {
out.println(START+ counter+ " | "+ getCurrentTime()+ " | "+ log);
out.flush();
} catch (Exception e) {}
* Append the given log to log file.
synchronized void appendLog(String msg, WebUser user)
if (msg == null || msg.length() == 0)
return;
count();
try {
out.println(START+ counter+ "----------------------------------------------------------");
out.println(getCurrentTime());
out.println(user != null? "User:"+ user.getFullName(): "User: public user");
out.println(msg);
out.println("\n----------------------------- end -----------------------------\n");
out.flush();
} catch (Exception e) {}
* Append the given exception to log file
synchronized void appendLog(Throwable error, WebUser user)
if (error == null)
return;
count();
synchronized (out)
try {
out.println(START+ counter+ "----------------------------------------------------------");
out.println("Exception occured at "+ getCurrentTime());
out.println(user != null? "User: "+ user.getFullName(): "User: public user");
error.printStackTrace(out);
out.println("----------------------------- end -----------------------------\n");
out.flush();
} catch (Exception e) {}
private String getCurrentTime()
Calendar c= Calendar.getInstance();
return
parse(c.get(Calendar.HOUR_OF_DAY))+ ":"+ // 0 --> 23
parse(c.get(Calendar.MINUTE))+ ":"+ // 0 --> 59
parse(c.get(Calendar.SECOND))+ " "+ // 0 --> 59
parse(c.get(Calendar.DAY_OF_MONTH))+ "/"+ // 1 --> 31
parse(c.get(Calendar.MONTH)+ 1)+ "/"+ // 1 --> 12
c.get(Calendar.YEAR); // yyyy
private String parse(int n)
return n< 10? "0"+ n: ""+ n;
private void count()
counter++;
if (counter> max)
incrementFile();
counter= 1;
private void incrementFile()
File file= null;
int n= 0;
while ((file= new File(parent, name+ n+ ".log")).exists())
n++;
if (out != null)
out.close();
out= openStream(file);
private PrintStream openStream(File file)
try {
if (file.exists())
return new PrintStream(new FileOutputStream(file.getPath(), true));
else
return new PrintStream(new FileOutputStream(file.getPath()));
} catch (IOException e) {
throw new RuntimeException(e.getMessage());
private int countLogs(File file)
int count= 0;
InputStream in= null;
try {
in= new FileInputStream(file);
int n;
while ((n= in.read()) != -1)
if (n == '\0')
count++;
} catch (IOException e) {
} finally {
if (in != null)
try {
in.close();
} catch (IOException e) {}
return count;
private File getLastFile()
File file= new File(parent, name+ "0.log");
File curr;
int n= 1;
while ((curr= new File(parent, name+ n+ ".log")).exists())
file= curr;
n++;
return file;
protected void finalized()
if (out != null)
out.close();
Maybe you are looking for
-
-
Hi, I have 2 questions on the pivot query below: 1 - I want to have total by Country and Year 2 - I want to allow the use a dynamic year range (like year between 1990 and 2000) Thanks, Ribhi select * from ( select CNTRY_NAME, MYYEAR,AM_AMOUNT from ye
-
Are IWBK only considering requirements on the component screen on PM orders
Hello We use External operations on PM orders. And from that are created purchase requisitions? But it seems that this purchase requisitions is not validated by IWBK? If I create exactly the same purchase requisition from the component screen on the
-
Questions asked in john deer company answers required urgently
1)can RFC adapter be used for asynchronous processing? 2)how to handle multiple idocs to file scenario without using BPM? 3)Is it necessary to create the partner profiles in case of file to idoc scenario? 4)can any body let me know th NETWEAVER ARCHI
-
New Sync function email link not working - only http\\: in link
The email to verify Sync account has an invalid link to verify the account