Need to restart 5660 Envy to make copy after printing

I cannot make a copy after using the printer unless I turn the printer/scanner/copier off and then back on.
After making prints from my PC, when I press the "copy" button, the unit makes a sound like the scanner head is getting to copy, but all that happens is a blank page gets kicked out and the message "Printing cancelled" appears and stays on till I turn off the unit.

Hi, Please follow the steps to solve the issue : http://support.hp.com/us-en/product/HP-ENVY-5660-e-All-in-One-Printer-series/6809225/model/6809226/document/c02205477/

Similar Messages

HT3053 i did some thing wrong that makes my mac just showing a black screen and amessage says you need to restart your mac .... etc and i wanted to talk to any one from apple and i couldnt get my mac serial number and i could do nothing i turned to some o

i did some thing wrong that makes my mac just showing a black screen and amessage says you need to restart your mac .... etc and i wanted to talk to any one from apple and i couldnt get my mac serial number and i could do nothing i turned to some one who formatted the hard desk and i tried to talk to any one from apple but it seems no one care i spent 4 years to be able to buy this mac and i dont know what to do > i will never buy mac again please some one tell me what to do dvd is not working i press on options and nothing happen what showld i do ? through it ? some body tell me what to do or where to go

Just to make certain, you inserted the original installation disk and started the MBP holding down the C key? Did the Optical drive reject the disk or did it just spin? If the former, the lens in the drive may be dirty and needs to be cleaned. If the latter, you will have to take it to an Apple repair facility.
Ciao.

I am not able to install firefox as it says I need to restart my computer to update an older version

I was cleaning up my laptop b/c it was running too slow and I uninstalled firefox with the plan of reinstalling it after I had gotten rid of everything I wanted to get rid of. Now when I try to reinstall it I am told I have an older version which needs to be updated and I should restart my computer to make that happen. Restarted computer 5 times and have gotten nowhere. I don't believe I have an older version on my computer as I pretty much deleted every single thing I ever downloaded or saved (on the plus side my computer is running much faster). Please help.

If you have problems with updating then easiest is to download the full version and uninstall the currently installed version.
You may need to remove the Firefox program folder to do a clean install of the new version.
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

I downloaded the new 9.? version told my PC to run it. It said to restart my system to take effect. I did. Every time I try to get on line it gives me the message that I need to restart my system. What should I do?

I downloaded the new 9.? version told my PC to run it. It said to restart my system to take effect. I did. Every time I try to get on line it gives me the message that I need to restart my system. What should I do?

Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Trying to recover from constant kernel panics 'You need to restart your...'

Since last night I've been having major problems with my MBP. After installing some software on my Windows 7 Bootcamp partition, and following a restart, I got a kernel panic and the message "You need to restart your computer.." in 5 languages, and the screen would freeze.
Disconcertingly the desktop video was totally screwed up - the best way I can describe it is that a looked like a really, really bad 8-bit display, with huge blocky pixels.
Multiple attempts at pressing and holding the power button, then restarting, simply replicated the problem. In the end I was eventually able to boot up using a superduper clone. I decided to reformat the MBP HDD and copy the clone over. However, during the process the screensaver came on and froze the system, so I had to restart and repeat the process, this time switching off energy saver preferences and the screensaver.
So I'm back up and running (for now). I'm about to restore my energy preferences and test out the screen saver. Fingers crossed, but in the meantime, has anyone else come across an issue like this?
I've got 3rd party RAM installed, have had it for over a year, so not sure if this is the problem (hasn't been so far). As part of my initial troubleshooting I tried resetting PRAM but this had no discernible effect, other than to make the patchy block video more uniform (if that makes sense?)
I haven't tried the Apple Hardware Test yet, just got to find my original disks! Spec of MBP as per signature below.
Lastly, after I restored my system a browser window appeared, pointing to a file in my system library which contained the following:
# File lib/activerecord/connection_adapters/postgresqladapter.rb, line 116
def quote(value, column = nil)
if value.kind_of?(String) && column && column.type == :binary
"'#{escape_bytea(value)}'"
else
super
end
end
Any views / comments / tips greatly appreciated.
VP
Message was edited by: Vestan Pance

Sorry for the lengthy post, but I wanted to post exactly what came up when I was luckily able to surpass the grey screen. I don't know what to do, and I can't find the startup disk that came with the computer 3 years ago.
HELP please!!!
{\rtf1\mac\ansicpg10000\cocoartf824\cocoasubrtf480
{\fonttbl\f0\fswiss\fcharset77 Helvetica;}
{\colortbl;\red255\green255\blue255;}
\margl1440\margr1440\vieww9000\viewh8400\viewkind0
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx792 0\tx8640\ql\qnatural\pardirnatural
\f0\fs24 \cf0 panic(cpu 1 caller 0x001A49CB): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:\
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x0134c000, CR4: 0x000006e0\
EAX: 0x00000000, EBX: 0x00945e40, ECX: 0x00000000, EDX: 0x04b40004\
CR2: 0x00000000, EBP: 0x25983508, ESI: 0x04ae9800, EDI: 0x2407c004\
EFL: 0x00010246, EIP: 0x007330f2, CS: 0x00000008, DS: 0x00000010\
Backtrace, Format - Frame : Return Address (4 potential args on stack) \
0x259832f8 : 0x128d0d (0x3cc65c 0x2598331c 0x131f95 0x0) \
0x25983338 : 0x1a49cb (0x3d2a94 0x1 0xe 0x3d22b8) \
0x25983448 : 0x19b3a4 (0x25983460 0x1 0x25983478 0x6) \
0x25983508 : 0x74218b (0x2407c004 0xb 0x0 0x731f0a) \
0x25983538 : 0x740600 (0x2407c004 0x25983570 0x0 0x1a3736) \
0x25983818 : 0x73481a (0x0 0x600d600d 0x7022 0x25983848) \
0x259838d8 : 0x8c4b33 (0x240a4564 0x4d2 0x8eb9dc 0x6e766461) \
0x259839c8 : 0x72f402 (0x240a4000 0x0 0x25983ad2 0x80) \
0x25983a28 : 0x726133 (0x4aedc00 0x0 0x25983ad2 0x80) \
0x25983b58 : 0x727813 (0x4aedc00 0x72acac 0x25983bfc 0x4) \
0x25983c18 : 0x712875 (0x4aedc00 0x1 0x0 0x25983dd4) \
0x25983c78 : 0x70c06b (0x4aedc00 0x0 0x0 0x4aedc00) \
0x25983c98 : 0x38c991 (0x4aedc00 0x3fce950 0x3fce950 0x0) \
0x25983ce8 : 0x3b2df6 (0x4aedc00 0x3fce950 0x3fce950 0x0) \
0x25983d48 : 0x18d6fd (0x4aedc00 0x3fce950 0x0 0x0) \
0x25983db8 : 0x12b4ee (0x40b3280 0x40b3e98 0x25983df8 0x11e042) Backtrace continues...\
Kernel loadable modules in backtrace (with dependencies):\
com.apple.NVDAResman(5.0.8)@0x72e000\
dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5fa000\
dependency: com.apple.iokit.IOGraphicsFamily(1.4.8)@0x704000\
dependency: com.apple.iokit.IONDRVSupport(1.4.8)@0x71f000\
com.apple.iokit.IONDRVSupport(1.4.8)@0x71f000\
dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5fa000\
dependency: com.apple.iokit.IOGraphicsFamily(1.4.8)@0x704000\
com.apple.iokit.IOGraphicsFamily(1.4.8)@0x704000\
dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5fa000\
Kernel version:\
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386\
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB\
Graphics: GeForce 8600M GT, GeForce 8600M GT, PCIe, 256 MB\
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz\
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz\
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), 1.4.4\
Bluetooth: Version 1.9.5f4, 2 service, 1 devices, 1 incoming serial ports\
Network Service: AirPort, AirPort, en1\
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5\
Serial ATA Device: FUJITSU MHW2160BHPL, 149.05 GB\
Parallel ATA Device: MATSHITADVD-R UJ-85J\
USB Device: Built-in iSight, Apple Inc., Up to 480 Mb/sec, 500 mA\
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA\
USB Device: IR Receiver, Apple Computer, Inc., Up to 1.5 Mb/sec, 500 mA\
USB Device: Bluetooth USB Host Controller, Apple, Inc., Up to 12 Mb/sec, 500 mA\
}

I just purchased the envy 7640 all in one printer and need to enlarge the print

I just purchased the all in one envy 7640 printer and want to print from my lap top but the printing that comes out is very very small and i need to enlarge it, I am not a real computer whiz so I just need step by step instructions on how to enlarge the copy being printed. Thank You in advance for your help.

Hey , Welcome to the HP forums! I hope you enjoy your stay here. I see that you are trying to enlarge the size of a document you are trying to print. While the specific directions will change depending on your operating system, the program you are using, and the type of document you want to print, I can certainly make sure you get pointed in the right direction. Assuming you are trying to print a text document (and please let me know if you are not) then first you will want to highlight the text you are trying to change the text of. Once highlighted you are looking for an option found at the top of most windows. The option usually has a font name to its left such as Times New Roman. When you select a larger font size it will change the highlighted text so that it matches the size you selected. I've included an image of the option below. If you are trying to print something that is not a text document then please let me know what program you are trying to print from as well as what operating system you are using. If you are not sure what your operating system is you can click here to find it. If you have any other questions please let me know. Also, if this resolves your issues then please let other forum users know by clicking on Accept as Solution below my post. I hope this helps and I hope you have a great evening!

Constant Kernel Panic and "You Need to Restart" screen

Hello all! I installed Leopard on my Powerbook G4 yesterday. I did the default upgrade. I then went through Software Update to get up to 10.5.4. I am getting Kernel Panics galore. Here are the latest results from the report:
Wed Jul 30 08:10:20 2008
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000015153E0C PC=0x00000000000B13EC
Latest crash info for cpu 0:
Exception state (sv=0x12df9a00)
PC=0x000B13EC; MSR=0x00001030; DAR=0x15153E0C; DSISR=0x40000000; LR=0x000AFCC8; R1=0x12F8BC50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0003F460 0x000B0048 0x000B031C 0x000367C4 0x00036BF4 0x0003F9F0
0x000B05D4
Proceeding back via exception chain:
Exception state (sv=0x12df9a00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x16d7ec80)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9E17
Kernel version:
Darwin Kernel Version 9.4.0: Mon Jun 9 19:36:17 PDT 2008; root:xnu-1228.5.20~1/RELEASE_PPC
System model name: PowerBook6,2
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x0009B498 0x0009BE3C 0x00029DD8 0x000AF210 0x000B2A78
Proceeding back via exception chain:
Exception state (sv=0x12df9a00)
PC=0x000B13EC; MSR=0x00001030; DAR=0x15153E0C; DSISR=0x40000000; LR=0x000AFCC8; R1=0x12F8BC50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0003F460 0x000B0048 0x000B031C 0x000367C4 0x00036BF4 0x0003F9F0
0x000B05D4
Exception state (sv=0x16d7ec80)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
BSD process name corresponding to current thread: kernel_task
I have tried creating a clean account, but the same thing keeps happening. I have also noticed that Spotlight re-indexes almost every time I have to restart.
Thanks in advance for the help! (BTW, I am posting this from another computer...)

Okay, here is the latest.
I ran both the Apple Hardware Test and Rember to check the system. Both checked out fine.
I used Carbon Copy Cloner to make a bootable backup. It had no trouble making the backup, but it wouldn't boot the machine.
I then used the Leopard Retail disc (10.5.1) and Disk Utility to erase my HD. I used the Zero-out method.
As I am sitting here right now, the "You need to restart" screen just came up. This is after starting up with the DVD and erasing the HD.
Any ideas or suggestions?
Thanks!!

Error while saving a workflow via sharepoint designer: Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.

While saving a workflow using SharePoint designer on a SharePoint site, I get the following error:
Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.
Steps to recreate error:
Login to the WFE server hosting IIS and workflow manager, open SharePoint Designer 2013 and login to a SharePoint site.
Access the list using SharePoint Designer 2013, in the workflow section, click new workflow.
In the new workflow dialog, enter workflow details, click save (see screenshot below).
Error message is displayed as below:
After restarting SharePoint Designer, the saved workflow is not seen in the site/workflows or list/workflow section.
Workaround
When the above steps are repeated while accessing the site via SPD from any other box besides the WFE/Workflow manager host server, the error is not encountered and its possible to save/publish workflows.
Notes
Workflow Manager 1.0 is installed.
The site has been registered with Workflow manager using Register-SPWorkflowService
cmdlet.
Any clue on why is this happening?

Hi Vivek,
Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

E72 needs to restart frequently

last 4 months am using my E72 for my communication needs.
but the issue with this system is when ever i connected to the data package for checking mails its working perfectly. But once i logged off and disconnect this internet connection the issue starts. after that incoming calls are not working, means the caller will get a reply that my phone is not in coverage area or it is switched off and i cannot make call too. this is happening many times even i am not using the internet. I need to restart the phone to resume the working stage.
can you please help me to solve this issue.

ksajeev, I had this issue too and...just the phone out of the box: i called it and it rang.....but after...for a few minutes if I treid again I got the "switched off or not under coverage" message. This happened at home, at office all was ok. So..my suggesion....these are, tom e, network issues....
Some of an incompatibility phone-network? My experience is that everything fixed by itself...I didn't make anything...

Kernel Panic: You need to restart you computer. Hold down the Power button until it turns off, then press the Power button again.

I apologize for writing a book, but I think explaining the full story may possibly get me a correct answer. I hope that someone can give me some insight as to what is the problem with my MacBook Pro. I have a MacBook Pro (15-inch Early 2008), model identifier: MacBookPro4,1 running OSX Lion 10.7.5 with 6 GB memory. My wife first noticed a problem with the display. Every so often it would get fuzzy with jumping lines going across the screen making it vitually unviewable. The final time that incident took place the computer froze which required holding down the power button to restart the computer. The computer started up to the point of the Apple logo and the spinning gear for quite some time until the screen darkened from top to bottom displaying the following message in five different languages: "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again." I have read other blogs and support communities where people get the message intermittently, but my computer would not go past that point no matter what. Through research and the Apple Store I was told that this is a Kernel Panic. The so called "Apple Genius" at the local Apple Store was unable to get the computer to boot past that point even with his gadget. It would not startup in recovery mode, safe mode or off of a disc. I forget exacty what he told me, but he said it was getting past the first two startup steps, but it would not get past the third step which is to mount the desktop. He guessed that it may be a problem with the hard drive; a loose wire or something or other. I disconnected the hard drive completely and took it out. Everything appered to be connected properly. Then I installed it back correctly, but it did not solve the issue. So I guess I disproved his theory of a loose wire... I purchased ProSoft Data Rescue 3 and connected my MacBook Pro to another Apple computer using a firewire 400 cable. I was able to get everything I needed off of the hard drive. I did some more research and I decided to restart the MacBook Pro in verbose mode (holding down the command button and V button). The computer magically started up!!! I was upset that I wasted my money on the ProSoft Data Rescue 3. I managed to take additional items off of the computer and back it up on to an external hard drive. After some time the computer froze. I repeated the power button process to restart and received the same kernel panic. I managed to get the computer to startup approximately six or seven more times via verbose mode; each time the computer staying on for a shorter amount of time before it would freeze. I managed to run Disk Utitlity. I performed first aid to fix the hard drive and it said that the hard drive appeared to be fine. After first aid I erased the hard drive and booted off of a Lion disc to perform a clean install or an erase and install. Lion installed until the progress bar got the the end where I received a message that there was an error installing Lion, please try again. Each time I attempted to install the software I would receive the same message. Eventually the computer would not boot from the Lion disc. I went back to the Apple Store and the Apple Genius was able to get the computer to boot off of his gadget where Lion istalled completely. I set up the computer as a new computer. He said that he partitioned the hard drive as DOS and then back to Mac OS Extended (Journaled) which would get rid of any errors the drive may have had. He guessed that the problem was the hard drive, but was not exactly sure. When I brought it home I installed all of the software applications I had on it previously. Approximately three days later, which may have been the fifth of sixth time starting up the computer, the display became fuzzy again and the computer froze. The computer did restart once and I was able to retreive a "log" which I have pasted below. After if froze for the second time it restarted once using verbose mode and froze almost immediately. After holding down the power key to shut it down and then restart; I received the same kernel panic after the Apple logo and spinning gear which put me right back to square one. Now the computer will not boot via any method. It freezes at the end of verbose mode which forces you to hold down the power button to shut down. I also read that poorly seated ram may cause this issue, but I removed and installed the ram multiple times. I even purchased new ram from Other World Computing (Mac Sales) 6 GB, but that did not make a difference. I think I may see six possible problems on the verbose screen mode, five errors and one warning; I will type them out here:
1. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key $Num (kSMCKeyNotFound)
2. SMC: :smcReadKeyAction ERROR: $Num kSMCKeyNotFound(0x84) fKeyHashTable=0x0
3. SMC: :smcInitHelper ERROR: MMIO regMap ==NULL - fall back to old SMC mode
4. WARNING - ACPI_SMCCtrlLoop: :initCPUCtrlLoop - no sub-config match for MacBookPro4,1 with 8 p-states, using default stepper instead
5. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key MOTP (kSMCKeyNotFound)
6. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key BEMB (kSMCKeyNotFound)
I was hoping that someone could read my log to ascertain wether or not they see a problem that stands out. I was also hoping that someone could tell me if verbose mode provides any information that may be wrong with my computer. I just hope that someone can give me some insight as to what may be wrong with my computer. If it is the hard drive I will easily replace it, but I want to make sure that is the problem first before I waste money on a hard drive or anything else. Please let me know if anyone requires any other information from me.
Thank you!
Interval Since Last Panic Report: 21959 sec
Panics Since Last Report:          1
Anonymous UUID:                    B62D9AB4-53DD-4F76-90B2-32453302297E
Sat Aug 31 15:20:06 2013
panic(cpu 1 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81d9d774, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000010, CR3: 0x0000000011d06000, CR4: 0x0000000000000660
RAX: 0x0000000000000004, RBX: 0xffffff809eb71000, RCX: 0xffffff8000892604, RDX: 0xffffff80b69d3aa8
RSP: 0xffffff80b69d3bd0, RBP: 0xffffff80b69d3bd0, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000010751b4, R10: 0xfffffffffffffff4, R11: 0xffffff8000640fd4
R12: 0xffffff809eb71000, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0x0000000000000010
RFL: 0x0000000000010202, RIP: 0xffffff7f81d9d774, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x0000000000000010, Error code: 0x0000000000000000, Faulting CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80b69d3880 : 0xffffff8000220792
0xffffff80b69d3900 : 0xffffff80002c4794
0xffffff80b69d3ab0 : 0xffffff80002da55d
0xffffff80b69d3ad0 : 0xffffff7f81d9d774
0xffffff80b69d3bd0 : 0xffffff7f81d8913a
0xffffff80b69d3c20 : 0xffffff7f81d89928
0xffffff80b69d3c40 : 0xffffff7f81d5be8f
0xffffff80b69d3c70 : 0xffffff7f8087f832
0xffffff80b69d3cb0 : 0xffffff7f8087f93d
0xffffff80b69d3cd0 : 0xffffff7f8088b625
0xffffff80b69d3d40 : 0xffffff7f80889c76
0xffffff80b69d3d80 : 0xffffff80006245ca
0xffffff80b69d3dd0 : 0xffffff8000657d4e
0xffffff80b69d3e30 : 0xffffff80002a3851
0xffffff80b69d3e80 : 0xffffff8000223096
0xffffff80b69d3eb0 : 0xffffff80002148a9
0xffffff80b69d3f10 : 0xffffff800021bbd8
0xffffff80b69d3f70 : 0xffffff80002aef10
0xffffff80b69d3fb0 : 0xffffff80002daec3
      Kernel Extensions in backtrace:
         com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80874000->0xffffff7f808acfff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
         com.apple.GeForce(7.3.2)[7E1D7726-416F-3716-ACCB-E1E276E35002]@0xffffff7f81d590 00->0xffffff7f81e1bfff
            dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f808 bf000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f808ad000
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80874000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro4,1 (Mac-F42C89C8)
System uptime in nanoseconds: 62230646656
last loaded kext at 53384504695: com.apple.filesystems.autofs 3.0 (addr 0xffffff7f81efc000, size 45056)
loaded kexts:
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleHDAHardwareConfigDriver 2.2.5a5
com.apple.driver.AppleHDA 2.2.5a5
com.apple.GeForce 7.3.2
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.AppleMuxControl 3.1.33
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBTCKeyEventDriver 227.6
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.iokit.AppleYukon2 3.2.2b1
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AirPortBrcm43224 501.36.15
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleUSBUHCI 5.1.0
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.nvidia.nv50hal 7.3.2
com.apple.nvidia.nvGK100hal 7.3.2
com.apple.nvidia.nvGF100hal 7.3.2
com.apple.NVDAResman 7.3.2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IOATAFamily 2.5.1
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro4,1, BootROM MBP41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 6 GB, SMC 1.27f3
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F7F7F9B0000, 0x4354353132363441433636372E4D31364643
Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7FBAFFFFFFFFFF, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.15)
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS543225L9SA02, 250.06 GB
Parallel ATA Device: MATSHITADVD-R   UJ-867
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0230, 0x5d200000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2

I had already written a book and I did not want to bombard people with more information, but in my previous research I did come across the major issues with the NVIDIA card. I also was well aware that Apple offered a replacement program that ended in December of 2012. I was going to add that in my original post, but I discounted that theory because I put my faith in the so called "Apple Genius" when I made my second trip to the Apple Store. I brought the NVIDIA card issue to his attention and asked him if he thought that may be the problem, but he said no. He said if it was the NVIDIA card that the screen would be completely black and there would be no startup chime. When I experienced the screen issues I thought it was a problem with the NVIDIA card or the logic board. I asked myself, how can a flawed hard drive cause the screen to act funny.
nbar and Rick Warren, I thank you both for your help and insight; people like you are the real "Apple Geniuses." I was hoping there was a way I could wipe the hard drive before I dumped the computer or attempted to sell it. I guess I will look into purchasing a new machine when I have the funds. Again...thank you both!

I recently updated my MacBook Pro and now it says I need to restart every time I turn the computer on. It is on a grey screen.

I have not used my MacBook Pro for a few months and when I started it up did all the microsoft and system updates. Now it will not turn on and it goes to a grey page that state "You need to restart you computer. Hold down the Power button untilmitmturns off, then press the Power button again." I have done this several times and keep arriving at the same page.

OK, then there is little else to do other than to reinstall OS X.
Make sure you removed everything connected to the MBP including any USB devices.
If your Mac came with a System Install DVD, then insert it and hold the c key while starting your Mac. This will boot from the DVD instead of your internal disk.
If you find the grey screen reappears then it may not have restarted from the disc, so try again. You have to get past this step to do anything. If you can't, the problem may be a dirty or damaged DVD or an inoperative optical drive.
When it gets to the Mac OS C Utilities screen, select Disk Utility and repair your hard disk. Record any errors that it finds, since your problem may be due to a failed hard disk. If that is the case, the failure will probably arise again.
Then, reinstall OS X. Reinstalling is non-destructive to your user accounts or data.
If your Mac is running Lion, or Mountain Lion, you can boot OS X Recovery and perform all the above without a disc.
Read about OS X Recovery here: http://support.apple.com/kb/HT4718

I can't install Firefox 5. It downloads & starts the wizard. I follow the prompts till it says it needs to restart the computer 'to complete a previous upgrade of firefox' . I say yes and it restarts and there is no sign of firefox and no error message.

The very first time I tried this there was a red message that flashed on the screen too fast to read it. I have Windows 7 and AVG. My son's computer also has Windows 7 and AVG and his upgrade went without a hitch. It deleted my old version of firefox (3.6.12) so now I'm using IE. Windows installed a lot of updates just before I tried upgrading firefox. I have tried turning my firewall down. I have gone to the file in downloads and double clicked it and it does the same thing. It always says it needs to restart the computer even though I have closed all other applications. Should I just give up and try reinstalling an older version of Firefox? Thanks

It is probably because you are not properly closing Firefox. Restarting your system would make sure that Firefox had terminated, but you do not have to do that.
To properly close Firefox on Windows systems, use
:File > Exit or "Firefox:" button > Exit
When you get the message "Firefox is already running" it is too late, and you must force termination of Firefox through the Windows Task Manager before restarting Firefox. Windows 7 has a keyboard shortcut to save you a step "Ctrl+Shift+Esc" then on "Processes" tab, select "firefox.exe" and use the "End Process" button. More thorough would be to right-click on the "firefox.exec" and choose "End Process Tree".
You would find firefox.exe in a Mozilla folder in your program files, but y0u would not want to delete it there, you would need to use the Control Panel which you have already identified and do it from there -- but generally you would not need to do that, and there is nothing in what you have posted to indicate that you should. But if you did do that, then don't let the install start Firefox for you as you would want to use you existing desktop icon or method of starting Firefox, and should decline having Firefox install start Firefox for you. When the install starts then invoke Firefox in your normal manner. This should eliminate problems of creating a new profile rather than using your old profile.

Server Side activties have been updated. You need to restart SharePoint Designer to use the updated version of activities.

Hello,
I have the following scenario for the installation of EPM 2013 environment:
1 Server running Windows 2008 R2 SQL Server 2008 R2 Service Pack 2
1 Windows Server 2008 R2 Standard SP1, running Sharepoint 2013 Enterprise (Standard Initially installed and then migrated to the Enterprise in order to install Project Server 2013), Project Server 2013 and Workflow 1.0 (2013).
After configuring and validating the configuration of Workflow 1.0 by http://server_name.example.com:12291 page and also check the Application Services in Central Administration and receive the Workflow Status = Connected.
Alright, but when I run the SPD 2013 RTM to test the creation of Sharepoint Workflow 2013, I get the following warning:
"Server Side activties have been updated. You need to restart SharePoint Designer to use the updated version of activities."
I've tried:
a. Restart SPD2013;
b. Restart Server 2013 and Sharepoint Workflow 1.0;
c. Reinstall and reconfigure Workflow 1.0
And the message is always displayed, preventing the use of Workflow Sharepoint 2013.
Can anyone help me, I'm in the middle of a deployment to a customer.
Print of alert

How did you uninstalledLanguage Pack from SharePoint 2013 ? when I googled it I found that language pack cannot be uninstall@
http://technet.microsoft.com/en-us/library/cc262108.aspx
"If you no longer have to support a language for which you have installed a language pack, you can remove the language pack by using the Control Panel. Removing a language pack removes the language-specific site
templates from the computer. All sites that were created that have those language-specific site templates will no longer work (the URL will produce a HTTP 500 - Internal server error page). Reinstalling the language pack will make the site functional again.
You cannot remove the language pack for the version of SharePoint 2013 that you have installed on the server. For example, if you are running the Japanese version of SharePoint 2013, you cannot uninstall the Japanese language support for SharePoint 2013."

After upgrading to 10.7.2, my iMac works fine for 40-50 minutes, then slows to a crawl. Restart gets back to normal, then 40 minutes later need to restart again. Thought about reinstalling Lion through Lion Recovery, but says my hard disk is locked?

After upgrading to 10.7.2, my iMac works fine for 40-50 minutes, then slows to a crawl. Restart gets back to normal, then 40 minutes later need to restart again. Thought about reinstalling Lion through Lion Recovery, but won't let me, says my hard disk is locked? Any suggestions?

Launch the Terminal app in /Utilities/, run these two commands (copy & paste each one separately and hit the return key):
sudo chflags 0 /volumes/*
sudo chmod a+rx /volumes/*
at the Password: prompt, type in your admin password, carefully since nothing displays on the screen, and hit the return key. These should unlock your drives. You might have to restart.

Early 08 iMac not booting - You Need to Restart Message

So after lunch today, I touched the shift key to wake up my iMac from sleeping. Screen came up, but it was totally frozen with distorted green digital "crud" in various places in the display. (no other way I know to describe the green stuff, it wasn't consistent lines or anything...just random distortion).
I powered down to restart, and the following message came up http://gallery.me.com/daveoli#100064 advising me I had to restart again. Did so, and same message. Tried the following methods, all resulting in the same message coming up:
Unplugged completed, waited an hour (in case of overheating) and powered-up.
Booted holding D key for h/w test - no test just got same message.
Booted in safe mode.
Booted from CD.
I called apple support, and the tech advised me to boot holding down cmd-option-r and then p to reset pram. 3 bongs, and then release....this worked! The mac booted up. First thing I did was connect firewire drive and make a back up. Ran a disk check with disk util and everything was ok. I then started to download the hw util from the mac site...and wham, screen froze again with the green crud.
This time, restarting with the resetting the pram did not work. Nothing gets me to progress beyond that "need to restart" screen. I will call Apple again in the morning...but in the mean time, any one here have any ideas or have seen this issue before?

That's a *kernel panic.*
They are usually caused by hardware problems, but can be software.
Disconnect all peripherals, except keyboard and mouse. Reconnect one at a time to see if you can find the culprit.
If that's no help, run the Apple Hardware Test, from the separate disc that came with your Mac.
more kernel panic info:
http://support.apple.com/kb/HT1392
http://www.index-site.com/kernelpanic.html
http://www.thexlab.com/faqs/kernelpanics.html

Need to restart 5660 Envy to make copy after printing

Similar Messages

Maybe you are looking for