Need to run 2 diffrent payrolls at a time

Hi,
We have an interesting scenario in which we need to run 2 different payrolls at a time, As this project is for an Government organization we were till now running only one payroll which was 4th pay commission, but now the client wants the payroll as per the 5th pay commission, but still we will need to run the 4 and 5 pay commission together as some of the employees have not accepted the 5th pay commission, so the clients wants the 5th pay to be run for all the employees who have accepted it, and wants to run the 4th pay commission for those employees who have not accepted the same.
Now we have decided to do the same through ABAP development as we did the same for the 4th pay commission before , we created one ZTABLE and one background Z program to support this table, now in this same program we are planning to do the 5th pay enhancement by using the same wage types (we will just need to create 1 more wage type for 5th Pay) , in short we will be using this same wage types for both 4th and 5th pay but this wage types calculation will be different for 4 and 5th pay which will be done through this table and the background program supporting this table, I would like to know that what precautions should be taken to do this, is this going to affect any other sub modules of HCM, and where all the effects will be there.

Hi,
This you can do via off cycle payroll and you have to change the payroll areas to a new one so that for the employees who have accepted can be shifted to new payroll area and thaey can be paid differential amt via offcycle payroll
Regards,
Kapil

Similar Messages

Need to run Adobe Customization Wizard every time for each new reader update?

Hi there,
This should be a simple question...
Do I need to run Adobe Customization Wizard every time on each new incremental reader update, or just once per major revision (e.g. Reader 9, Reader X)?

This question hasn't been answered because it would be better asked in the enterprise deployment forum. The Wiz is an ent deployment tool and only is used for initial deployments in most cases. You use it to customize the installer and the product when it's first installed. You could use it for any install, but that is a less common scenario.
Usually, you customize the first version you install and then just apply updates as they are released.
HTH.
Ben

We need to run wb_workspace_management.set_workspace procedure each time

Hi
We appear to need to run wb_workspace_management.set_workspace procedure each time in a new session before running OWB Mappings.
The above procedure is run with values REP_ADMIN/REP_ADMIN and then we are able to successfully run the mappings. However, on opening a new session, if this procedure is not run, the execution of mappings fails. However the values REP_ADMIN/REP_ADMIN are already present in the view all_iv_workspaces in owbsys schema.
Should this procedure be run as the first thing before starting execution of the mappings or is there some other issue?
If the stored procedure is not run this message is displayed.
ORA-20013: The workspace has not been set. Please call wb_workspace_management.set_workspace procedure to set workspace first.
ORA-06512: at “OWBSYS.WB_WORKSPACE_MANAGEMENT”, line 1356
ORA-06512: at “OWBSYS.WB_WORKSPACE_MANAGEMENT”, line …
Any help with diagnosing this issue is greatly appreciated.

Should this procedure be run as the first thing before starting execution of the mappings or is there some other issue?Yes, you need to execute set_workspace procedure for each new opened database session before running mapping or selecting data from OWB public view.
It is OWB requirements starting from 11g R1 OWB release and there are no any workarounds.
But maybe you can include call to set_workspace in OnLogon database trigger (I don't done it and cannot confirm that this works) if you want to avoid manual execution of set_workspace ...
Regards,
Oleg

Need to run windows OS on my macbook pro at the same time with MAC OS. what do i use

I need to run windows OS & office so i can access my company server. What is the best platform to use & which will enable you to run both oS at the same time.
Thanks

Depending on the specific features that you think you need in a Virtual Machine, you should research the paid "Parallels" and "VMWare Fusion", and the free yet very capable "VirtualBox". I personally use VirtualBox because it does NOT include all of the Mac-to-VM interactivity features that the others do. For performance and security reasons, I specifically do not want my VM to be able to interact with my Mac OS host in any way other than copy and paste.
On your Windows VM, if you are running windows 8.1, and are not logged in as an administrator as your primary account, then the built in Windows Defender is a perfectly suitable for anti-malware protection. If you are running Windows 7 (or 8.1) and want additional protection I would recommend "BitDefender Free" as it has great protection yet has a very light-weight performance hit.

DO we need to run Info Package every time before DTP Process to load the da

Hi friends,
IN BW 7.0 do we need to run every time the Info Package before DTP process to load the data into target or only one time we need to run the Info package then from that point onwards we need to run DTP process, Please let me know. basically I am planning to create the process chains so I should put Info package before DTP to load the deltas or full load??
Thanks a lot,
Harshan

Hi,
When you are loading from source system i.e. datasource to target, you will always have to use an infopackage to load to PSA and a subsequent DTP.
When loading for instance from DS to Cube, you only need to schedule a DTP.
I hope this helps you.
Best regards,
Olav

Need assistance with my Porsche Design LaCie Time Capsule... It is not operating at all.. I have ran the diagnostic via the Disk Utility and under the error reading it runs the repair and then says it not about to repair what do I do... Thanks

Need assistance with my Porsche Design LaCie Time Capsule... It is not operating at all.. I have ran the diagnostic via the Disk Utility and under the error reading it runs the repair and then says it not about to repair what do I do... Thanks

LaCie doesnt make ANYTHING. It contains a Seagate 3.5" 5400RPM HD.
Check the HD on another computer, if nothing, your SATA bridge is fried, or the HD (very unlikely since its a Seagate inside)
Youd have to crack open the HD, remove the SATA bridge cart thats plugged into the HD and put the HD into an enclosure or a HD dock to get the data
those external HD use a 50 cent SATA bridge famous for failing. The curse of all the good HD externals is the junk 3rd party SATA bridges attached to them that crash and burn.
Sata bridge:

Can cisco router support OSPF-TE and ISIS-TE same time for CSPF to compute a TE LSP? I may need to run both IGP in parreral.

Can cisco router support OSPF-TE and ISIS-TE same time for CSPF to compute a TE LSP? I may need to run both IGP in parreral.

hello - I have just moved your post to the Topic forums - you had posted your question in an obscure non-visible promotional community Hopefully our community users will see your question now.

Can cisco router support OSPF-TE and ISIS-TE same time for CSPF to compute a TE LSP? I may need to run both IGP in parallel

Can cisco router support OSPF-TE and ISIS-TE same time for CSPF to compute a TE LSP? I may need to run both IGP in parallel.

Hi Johnny,
Per my understanding you can. It is equivalent to running 2 IGP and installing the entry in RIB table based on administrative distance.
-Nagendra

Does the WD SmartWare needs to run all the time?

Hi. I use WD SmartWare (not Pro, just the free version) to do my backups to WD My Cloud. I also use WD Quick View, which is running at all times. WD SmartWare is set up to continuous back up (i.e. monitoring my drives and copying files over when new files are added etc.). Does it have to be running all the time for that or maybe WD Quick View controls the backups somehow? If SmartWare needs to run at all times, is there any way of minimizing it to system tray rather than to the taskbar? It's really annoying that the icon just sits there... I like my taskbar to be tidy! Thanks

Smartware will run continuously in the background as a service, but no the app GUI itself doesn't need to be open all the time. Once installed it will set itself up to do that, so you only need to open the actual app GUI if you want to start/edit./stop the configuration for the backup itself. Your taskbar can be nice and tidy

Need to develop a Mobile Application for Time Entry

Hi,
I need to develop a Mobile App for Time Entry details which can used as an Applicaion on Android or iOS.
Can anyone help me with the approach i need to follow to develop such an application which can be used on Android or other OS.
Thanks,
CV

Hi CV,
Oracle Application Development Framework Mobile (ADF Mobile) browser is a standards-based framework that enables the rapid development of enterprise mobile applications. Oracle Fusion Middleware 11g release 1 of ADF Mobile browser extends Oracle ADF to browsers running on mobile devices. Because ADF Mobile browser is built upon the component model of Java Server Faces (JSF), you can quickly develop applications for mobile browsers. ADF Mobile browser's mobile-specific extensions to JSF enable you to develop mobile applications using the same methodologies for developing JSF applications for the desktop.
http://docs.oracle.com/cd/E17904_01/web.1111/e10140/pda_ovrv.htm#ADFMB101
Cheers,
Vlad
Give points - it is good etiquette to reward an answerer points (5 - helpful; 10 - correct) for their post if they answer your question. If you think this is helpful, please consider giving points

Need to run the package

Hi friends,
i need to run a package which will send a mail as soon after it runned. I have a package. But i need to run that package for each and every 10 min in a day. For that how i can create a job to execute that package.
As a result of the job for each and every 10 min ill be receiving a mail. How to create a job to execute my package for every 10 min.
Regards,
Mini

Hi srikanth and hoek,
Thanks for your reply.
i dont know why the job is not running and executing the package.
if i compiled the package separately means, i can able to execute it successfully and also im receiving mails correspondingly.
begin
it_check_overdue_issues.email_overdue;
end;But if i tried to execute the above package using a job means, it is not running corresponding to the time and also not receiving emails. This is my DBMS_JOB query that i used, it is compiling successfully without errors, but not working what is wrong with it.
DECLARE
    jobno number;
BEGIN
    DBMS_JOB.SUBMIT(
        job => jobno,
        what => 'BEGIN it_check_overdue_issues.email_overdue; END;',
        next_date => SYSDATE,
        interval => 'SYSDATE + (2/1440)');
    COMMIT;
END;Regards,
Mini

Need to run "clearfault" on M5000

I have a customer that has an M5000 <b>not</b> under maintenance with Oracle. They have a fault condition on the frame and they need to run "clearfault" to clear the condition. Will Oracle supply the special password without a contract?

Bob,
See if your customer can open a support call on a Time-and-Materials basis.
(Have them be seated when they're quoted the T&M fees.)
That will get a Service Engineer to the customer's site with the password to fix the system.
That SE will input it to the chassis and the system will get repaired.
Also request that the SR be dispatched and escalated through the customer's local District Service Manager with a request to waive the T&M charges. The DSM has the responsibility to maintain company Good Will and to maintain company profitability in the local district.
The worst that can happen is that the customer gets the service on a pay-as-you-go basis.
They could also get the charges waived if they put the system under contract.
They could also just get the charges waived.
It will all depend on what sort of relationship they have with the DSM.

I need to run a map against a particular dataset - how can i do it in OWB

Hello again :)
I need to run a map against table on a particular dataset (WHERE clause) - how can i do it in OWB?
The map is loading data from table A into table B (doing all sorts of wierd and wonderful things in between). Now table A had more (a lot more) data added which i have to load into table B.
How can i modify my map so that it only runs agains this newly added data (normally i would do a where clause).
i cannot find how to do it in OWB :(
The map i am runnig is fairy complex so i didn't really want have to create another table/view of the data i need then remap in all etc.
Any ideas would be greatly appreciated.
thank you very much
Kind Regards
Vix

Hello AP
Well that is the thing - records are constantly added to table A all the time and then undergo tramsformations and loaded into table B. What i want to do is somehow indicate in the the map to only run agains records that have beed added (colmn2 = 'value').
At the moment i created a view for the desired dataset (colm2 = 'value') and remapped everything. But it is a bit of a pain:
1) there are a lot of functions and each takes a number of columns (i have some functions taking up to 6 diff columns)
2) i have data loaded to table A all the time and i need to then transform and load it to table B. so i try to aviod doing the whole re-mapping thing all the time.
In TOAD it would be a simple statment 'where colm2 = 'value' and all my functions will be run agains those records that satisfy the condition. How can i do it in OWB?
If i use filter - i would have to use 'mid' table where filtered records will be loaded and from that use 'mid' table as table A in the map. does this make sense?
the main disadvantage is the performance - moving data from one table to 'mid' table etc.
I tried using conditional load filter and it still doesn't do what i want.
After trying diff options i decided to ask people here about it. The only thing i have left to try is to ask Oracle support. I am sure it would be a 'user knowledge' as i am sure this functionality exist i just can't find any references to it.
Thank you very much for all your help. In fact this forum helped me a lot with a number of other issues :)
i just feel like a lemon coz it is very simple thing and i can't find how to do it...
Kind Regards

BPC 10.0 NW - How do I make Business Rules run one Period at a time

I was wondering if anyone has a way to make business rules run one period at a time before moving on to the next to the next time period (i.e. January 2014 calc prior to moving on to February 2014). In past SQL this could be achieved with a piece of script *CALC_EACH_PERIOD. Is there anything like this that can be applied in the NW platform for Business Rules? I have some logic that I want to run through a package on multiple periods at once. Part of this logic contains a Business Rule that uses a value from the preceding period. the Business rule appears to be calculating all time periods selected in the package at once so it is missing the piece that is supposed to come from the prior month unless the package is run one period at a time. I need the logic to run sequentially by time period (oldest first) when more than one time period is selected.
thanks,
Keith

Hi Vadim,
Script for the business rule is below, it runs along with the FX_Trans rule in the same package ( I have also attached a screen shot of the actual Business rule its self)
*RUN_PROGRAM CALC_ACCOUNT CATEGORY = %CATEGORY_SET% ENTITY = %ENTITY_SET% CURRENCY = USD //GROUPS = %GROUPS_SET% TID_RA = %TIME_SET% //OTHER = [AUDITTRAIL=%AUDITTRAIL_SET%] CALC = CALC_HIST_USD *ENDRUN_PROGRAM
Thanks, Keith Carlson

While running the query how much time it will taken, I want to see the time

Hi Folks
I would like to know ... While running the query how much time it will be taken, I want to see the time? in WEBI XI R2.....
Plz let me know the answer.......

Hi Ravi,
The time a report runs is estimated based on the last time it was run. So you need to run the report once before you can see how long it will take. Also it depends on several factors... the database server could cache some queries so running it a second time immediately after the first time could be quicker. And there is the chance of changing filters to bring back different sets of data.
You could also schedule a report and then check the scheduled instance's status properties and view how long a report actually ran.
Good luck

Need to run 2 diffrent payrolls at a time

Similar Messages

Maybe you are looking for