Need to run Eseutil when moving volumes?

Do I need to run the Eseutil integrity check when I'm moving the volumes for exchange to a different DPM 2012 R2 server?
It looks like Eseutil is verifying the Integrity of the Exchange database. This was originally run on the Exchange database months ago and the backups had been running well. Now that I will stop the backups on the initial DPM server and start
them back up on a different DPM server do I need to run Eseutil again?
Thanks in advance.
-Jenna
Hi Jenna,
When you move the protection you will still want to run eseutil. Here is explanation of what it does:
It is recommended that you use a utility called Eseutil on DPM when protecting
Exchange. Using this utility is recommended because DPM will use the utility to
perform consistency checks on the data that is written to disk or tape to make sure
it is not corrupt. Using the utility will minimize the load that is put on the Exchange
server from the backup; the utility does this by offloading the resources used by
Eseutil on the DPM server instead of on the Exchange server.
http://books.google.com/books?id=lLL2KOxwxz0C&pg=PT265&lpg=PT265&dq=Eseutil+Data+Protection+Manager&source=bl&ots=PeFw60l19n&sig=j94Ns_rLMybKR1taF7j3J_YUrfM&hl=en&sa=X&ei=T0c6U_uNNtStsQTI54BY&ved=0CE4Q6AEwBA#v=onepage&q=Eseutil%20Data%20Protection%20Manager&f=false
My Blog | www.buchatech.com | www.systemcenterportal.com
If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion
in a test environment before implementing!

Similar Messages

Clicking when moving volume

Bought new iPod Nano in June. Clicking sound when the volume in moved up or down?
[email protected]

What exactly is wrong with your Clicking Sound ???
Darie.

Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?

Like the topic - "Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?"
I installed this OS, and it looks nice, but it's terrible to use. I randomly have the volume controls get disabled, and sometimes the volume menu in the system tray does nothing when adjusted which I've never seen in an OS before. The trash won't empty. When I try to drag and drop newer files over existing ones, nothing happens. The old ones just stay there. I have to delete the old ones and then move the new ones. And when I go into the protected files to manage audio plugins (I make music), the first thing I hit are error codes galore, and password prompts that either don't popup when they should, or don't execute the command after I provide my password.
What can I do now that I installed the flames of **** onto my computer?

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

OSB gives confusing volume information when moving tapes between libraries

Hi,
We have an SL500 tape library as our main backup device. We also added an SL24 to the OSB domain for testing prior to installation elsewhere. We have an RMAN-FULL-MF media family, which at some point in the past had unexpired media in both libraries.
As part of the process of decommissioning the SL24 prior to shipment, I unloaded the volumes from the SL24 and imported them into the SL500. However, I may not have run the necessary OSB commands, such that OSB has up-to-date information as to where the physical media is located.
Our DBA has tried to delete some old database backups, and this has failed because the backup pieces cannot be found. However, we have a volume in the SL500, RMAN-FULL-MF-000007 which appear to contains the backup pieces (see 'lspiece' output below), but OSB thinks the volume is still in the SL24.
When I do an inventory of the SL500 I get:
lsvol -L SL500
Inventory of library SL500:
in 1: volume OSB-CATALOG-MF-000085, barcode 000001, 408693760 kb remaining, expires 2008/10/02.07:01
in 2: volume CLIENTS-INCR-MF-000042, barcode 000000, 405070848 kb remaining, expires 2008/10/14.03:01
in 3: unlabeled, barcode 000002
in 4: volume RMAN-ARCH-MF-000006, barcode 000003, 387257344 kb remaining, content manages reuse
in 5: volume RMAN-ARCH-MF-000003, barcode 000004, 358014976 kb remaining, content manages reuse
in 6: volume RMAN-FULL-MF-000005, barcode 000005, 353155072 kb remaining, content manages reuse
in 7: volume OSB-CATALOG-MF-000087, barcode 000006, 408693760 kb remaining, expires 2008/10/04.07:01
in 8: volume RMAN-FULL-MF-000006, barcode 000007, 361881600 kb remaining, content manages reuse
in 9: volume CLIENTS-INCR-MF-000044, barcode 000010, 407601152 kb remaining, expires 2008/10/20.02:02
in 10: volume OSB-CATALOG-MF-000084, barcode 000011, 408794112 kb remaining, expired
in 11: volume CLIENTS-INCR-MF-000039, barcode 000012, 406033408 kb remaining, expires 2008/10/10.03:02
in 12: volume CLIENTS-INCR-MF-000036, barcode 000013, 405890048 kb remaining, expires 2008/10/03.03:02
in 13: volume OSB-CATALOG-MF-000086, barcode 000014, 408708096 kb remaining, expires 2008/10/03.07:02
in 14: volume CLIENTS-INCR-MF-000038, barcode 000009, 407687168 kb remaining, expires 2008/10/04.04:04
in 15: volume CLIENTS-INCR-MF-000043, barcode 000008, 407586816 kb remaining, expires 2008/10/17.03:03
in 16: volume CLIENTS-INCR-MF-000037, barcode 000015, 409627648 kb remaining, expires 2008/10/03.03:02
in 17: volume CLIENTS-FULL-MF-000028, barcode 000016, 337067008 kb remaining, expires 2008/10/05.04:18
in 18: volume CLIENTS-FULL-MF-000029, barcode 000017, 318909440 kb remaining, expires 2008/10/05.05:08
in 19: volume CLIENTS-INCR-MF-000041, barcode 000018, 408406016 kb remaining, expires 2008/10/11.05:09
in 20: unlabeled, barcode 000019
in 21: volume CLIENTS-FULL-MF-000031, barcode 000020, 312597504 kb remaining, expires 2008/10/12.05:04
in 22: volume CLIENTS-FULL-MF-000033, barcode 000021, 389140480 kb remaining, expires 2008/10/19.05:08
in 23: volume CLIENTS-FULL-MF-000034, barcode 000022, 392922112 kb remaining, expires 2008/10/19.05:08
in 24: volume CLIENTS-INCR-MF-000035, barcode 000023, 409815040 kb remaining, expires 2008/10/02.05:06
in 25: volume CLIENTS-FULL-MF-000032, barcode 000024, 356518912 kb remaining, expires 2008/10/19.02:02
in 26: volume CLIENTS-INCR-MF-000040, barcode 000025, 409699328 kb remaining, expires 2008/10/11.04:04
in 27: volume CLIENTS-FULL-MF-000030, barcode 000026, 375496704 kb remaining, expires 2008/10/12.04:18
in 28: volume CLIENTS-INCR-MF-000034, barcode 000027, 408218624 kb remaining, expired
in 29: unlabeled, barcode 000028
in 30: unlabeled, barcode 000029
in 31: volume RMAN-ARCH-MF-000004, barcode 000056, content manages reuse
in 32: unlabeled, barcode 000059
in 33: volume RMAN-ARCH-MF-000005, barcode 000055, content manages reuse
in 34: volume RMAN-FULL-MF-000007, barcode 000057, content manages reuse
in 35: unlabeled, barcode 000058
in 49: unlabeled, barcode CLNU00
in 50: unlabeled, barcode CLNU01
This shows the relevant volume. However, when I do an 'lsvol' by media family, I get:
lsvol -f RMAN-FULL-MF
VOID OOID Seq Volume ID Barcode Family Created Attributes
166 166 1 RMAN-FULL-MF-000005 000005 RMAN-FULL-MF 07/06.03:20 never closes; content manages reuse
167 167 1 RMAN-FULL-MF-000006 000007 RMAN-FULL-MF 07/06.03:23 never closes; content manages reuse
324 324 1 RMAN-FULL-MF-000007 000057 RMAN-FULL-MF 08/31.02:27 never closes; content manages reuse
288 288 1 RMAN-FULL-MF-000007 000057L3 RMAN-FULL-MF 08/31.02:27 never closes; content manages reuse
The volume RMAN-FULL-MF-000007 appears twice! The long version of this command gives:
lsvol -lf RMAN-FULL-MF
Volume OID: 166
Volume ID: RMAN-FULL-MF-000005
Barcode: 000005
Volume sequence: 1
Media family: RMAN-FULL-MF
Current location: SL500
Label host: ldvbspa01
Created: 2008/07/06.03:20
Closes: never
Expires: never; content manages reuse
Space remaining: 336.8 GB
Original OID: 166
Volume OID: 167
Volume ID: RMAN-FULL-MF-000006
Barcode: 000007
Volume sequence: 1
Media family: RMAN-FULL-MF
Current location: SL500
Label host: ldvbspa01
Created: 2008/07/06.03:23
Closes: never
Expires: never; content manages reuse
Space remaining: 345.1 GB
Original OID: 167
Volume OID: 324
Volume ID: RMAN-FULL-MF-000007
Barcode: 000057
Volume sequence: 1
Media family: RMAN-FULL-MF
Current location: SL500
Label host: ldvbsm01
Created: 2008/08/31.02:27
Closes: never
Expires: never; content manages reuse
Original OID: 324
Volume OID: 288
Volume ID: RMAN-FULL-MF-000007
Barcode: 000057L3
Volume sequence: 1
Media family: RMAN-FULL-MF
Label host: ldvbsm01
Created: 2008/08/31.02:27
Closes: never
Expires: never; content manages reuse
Space remaining: 390.1 GB
Original OID: 288
I ran the 'lspiece' command to get information about the specific backup pieces in question and I get:
lspiece -l -S 7ujpclm8_1_2
Error: can't read location SL24(DELETED) - UUID not found
Warning: can't obtain section and volume data for piece OID 2058 - UUID not found
Backup piece OID: 2058
Database: ukldmoms
Database ID: 3307807331
Content: full
Copy number: 0
Created: 2008/08/31.02:27
Host: ldvbsm01
Piece name: 7ujpclm8_1_2
BSOID: 3378
Volume ID: RMAN-FULL-MF-000007
File: 1
Sect: 1
lspiece -l -S 7vjpcn5b_1_2
Error: can't read location SL24(DELETED) - UUID not found
Warning: can't obtain section and volume data for piece OID 2059 - UUID not found
Backup piece OID: 2059
Database: ukldmoms
Database ID: 3307807331
Content: full
Copy number: 0
Created: 2008/08/31.02:31
Host: ldvbsm01
Piece name: 7vjpcn5b_1_2
BSOID: 3379
Volume ID: RMAN-FULL-MF-000007
File: 2
Sect: 1
This appears to indicate that OSB still thinks the volume is in the SL24, which has now been removed from the domain.
Does anyone know what I can do to get OSB to recognise that the volume is now in the SL500? Do I need to run the 'obtar' command with the -G option to re-catalogue the tape?
Ultimately I like to see some documentation on how to transfer tapes between libraries in the same domain, and also between domains, with specifc commands to run.
Thanks.

Hi,
Not quite as straightforward as you suggest, but we have made progress.
The volume has to have a rotation policy before the 'chvol' command will run, which seems logical. So I created a policy for movement of tapes between the SL24 and SL500, and created and ran the media movement job. However, I then tried to remove the rotation policy, but could not because it was associated with the volume just moved.
I then tried a 'chvol -R "" RMAN-FULL-MF-000007' which returned an error:
"Error: can't relocate volume RMAN-FULL-MF-000007, volume has no rotation policy"
Which was the effect I wanted really - the removal of the association of the volume with the policy. I was then able to remove the rotation policy.
Also, 'lsvol -f RMAN-FULL-MF' still shows this volume listed twice.
The upshot of all this is that OSB now appears to show the volume in the right location and our DBA was able to delete the obsolete backups via RMAN.

Download content locally when needed by running task sequence functionality with Windows PE.

I am trying to understand what happens when the "Download content locally when needed by running task sequence" option in chosen on a task sequence deployment. My assumption is that any needed packages would not be identified
and downloaded until task sequence is kicked off.
Using task sequence boot media, it looks likes a package has been obtained before any task sequence has been selected. I am assuming the package was acquired during the WinPE boot process. Can anyone confirm that this is
the correct behavior when using the "Download content locally when needed by running task sequence" option? If not, how would WinPE be obtaining the PS100292 SCCM package?
This specific package contains and HTA file. Only one of several task sequences deployed to the All Unknown Computers make a call to the HTA file. The one that does, the HTA call is the very first step of the task sequence.
--Tony

Hi everyone! I figured what was going on here. I was using an ESX VM and the package was stored on the c:\ from previous attempts and troubleshooting. Long story short, I had to rip the HDD from the VM and add a new one to set every thing back.

When I right click on a report I need to run, I can not run it because a pop-up says "Back Forward Reload... Inspect Element ". How do I prevent this popup?

I have created reports in Wal-Mart Retail Link. To run the report, you right click on the report and a pop-up comes up that allows you to modify, submit, delete or share this report. These options are hidden by another popup that gives the options to Back Forward Reload...Inspect Element (Q). It runs correctly when using Internet Explorer but not Firefox.

'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Please report back soon.

I'm new to GB and I'm trying to record solo vocal with a backing track. I can get the track running OK but I can't seem to record. I think when I press record the backing track mutes and I need it running.. Thanks in advance!

I'm new to GB and I'm trying to record solo vocal with a backing track. I can get the track running OK but I can't seem to record. I think when I press record the backing track mutes and I need it running.. Thanks in advance!

guess what it says java file. So yes i'm sure. Sarcasm. Not the best way to encourage a total stranger to help you. Then there's
Sorry if i wasn't more clear but was that response needed?No it wasn't needed, but I'm not the one asking for help so I have the luxury of not worrying too much about it. It's extremely frustrating trying to drag relevant information out of someone, and makes one less inclined to bother.
Anyways, there's still nothing in this thread that actually explicitly says "there is a file called VolcanoApp.java in the directory where I'm running javac from" and I really can't be bothered banging my head against the wall any longer. You've made a silly mistake, or a false assumption. We all do it from time to time. My advice is, take a break, go for a walk and re-visit this in a while. You'll probably spot the mistake right away.

Running Adobe Photoshop Elements 12 is sluggish when moving between pictures on new iMac.

Running Adobe Photoshop Elements 12 is sluggish when moving between pictures on new iMac. I have a standard 21" iMac with 8 gb of RAM, but it still sticks for up to 30 seconds when switching pictures in organizer or other functions. How can I get it more responsive?

How large is your HD & how much space do you have left? Make sure you are using the latest version of APE.
You should also contact Adobe Support and/or post in the Adobe Forums since it's their product.

Can you keep your playlist when moving from computer running xp to computer running vista. v

can you keep your playlist when moving from computer running xp to computer running vista as i keep losing my playlists when using computer with vista running on it.ipod touch 3rd gen set up originally on computer running xp.thanks.

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Localconfig.bat needs to run when start ASM

Hi All,
I am using ORACLE 10g R2 (10.2.0.4). I want to use ASM on Windows?
I have two query for that:
1- can I use ASM for windows? or it benificial only for Linux os?
2- why I need to run "localconfig.bat" file for standalone db? this batch file is creating "OCR" keay and some CSS service. According to my knowledge this OCR and CSS is a part of Cluster.
Can any one guide me on this topic?
Thanks...

hi
in regard to 1st Q - ASM is the recommended storage for Oracle on all platforms, especially when DB is in ARCHIVELOG (RMAN benefits plus listed below).
However for some DB's like e.g. "calculating only" ones, the Windows NTFS is a good choice (fast).
Quote:
ASM is one the best things that has happened to Oracle since a long time and is quickly maturing into the de facto standard for Oracle
database storage. It is the most cost-effective automated database storage solution for Oracle and Grid computing
as it eliminates the need to perform guesswork when implementing and tuning database storage, eliminates the need for costly LVMs,
eliminates the need to perform manual IO rebalancing, eliminates unnecessary downtime with storage reorganization
and vastly improves DBA’s productivity.
It allows the company’s storage to be most effectively used and consolidated leveraging Oracle’s cluster technology.
It is the present and future.

I have an iMac and a NAS installed, I've made an automator based script to mount the NAS volumes, will i have to rewrite when moving to Lion?

I have an iMac and a NAS installed, I've made an automator based script to mount the NAS volumes, will i have to rewrite when moving to Lion?

Hi Tony,
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

When moving countries, do we then need to create a new apple id?

When moving countries, do we then need to create a new apple id to purchase from our new country?
I have logged into my apple id in a browser (not itunes) to change my country details so that I can register my CC information to purchase from my new country. "Changing countries option" is not provided.
The only solution I can see is creating a new apple id for my new country. Which means loosing purchased apps on my phone as well as not being able to access music purchased in my previous apple id (unless manually burning to CD and importing again that way).
Can anyone confirm or provide a solution to a common senario of moving to another country to live?

Hi,
I'm desperately trying to solve my problem to Buy Book, using Aperture 3 and MacBook Pro. I have tried using re-entering my current account and creating another account (created in Apple Store and not Apperture), used the Aperture Library First Aid (repaired permissions and databases), transfered the preferences to the desktop etc., only did not restore the library and reinstalled Aperture (bought it over the Mac App Store).
Please help, I realy wish this book.
Thanks!
Lanika, SI

Adobe Applications Manage rin Yosemite Kaput. Advisor directs me here. another Adobe Run-around. CS5 Extended still crashing with Eyedropper when moved to desktop.

Adobe Applications Manage rin Yosemite Kaput. Advisor directs me here. Another Adobe Run-around. CS5 Extended still crashing with Eyedropper when moved to desktop.

I'm sorry to report that I've not yet figured out how to go about this 'Cleaning'. I've run the cleaner on the Applications Manager, then attempted to reinstall the downloaded Applications Manager and again I get the same message as above. I attempted to trash the Applications Folder and rerun the installer. That did not work. I then moved the downloaded Applications folder to the utilities folder and restarted CS5>Updates. It reports, again it can't find/or is damaged Applications Manager. I will now take the folder out of the trash and return it to the Utilities folder.
If I run the Recovery tool on Photoshop will I uninstall Photoshop or will it only 'clean' it. Does it mean I will lose any third party plugins?
I do thank you for your continued support. This is the first time a requested answer/suggestion to my troubles has been promptly be addressed by 'Adobe'. I am also pleased I can reply to an email to aid in resolving questions.
Again, Thanks!
CB

My videos stuck in workspace but runs good when exported ... need a help please

my videos stuck in workspace but runs good when exported ... need a help please

Hello,
My video slows down in my workspace but runs in normal speed when exported

HT5509 In guided Access does not unlock when I Press the home button I need to run down the Battery and turn back on and it is then out off guided Access

In guided Access does not unlock when I Press the home button I need to run down the Battery and turn back on and it is then out off guided Access

How To Get Out Of Guided Access On iOS6? : TechNGuide
SOS I cannot Exit Guided access: Apple Support Communities

Need to run Eseutil when moving volumes?

Similar Messages

Maybe you are looking for