Need to run the rescheduling job V_V2 whenever goods are received

Hi,
Whenever Goods are received into the warehouse then the rescheduler program v_v2 need to be run only for that particular material automatically.
Any help or suggestions would really be appreciated.
Thanks,
Sre

Balaji,
Thanks for your quick response.
Currently we are running V_v2 as a background job every night for all the materials.
But now we need to run it for a material for which goods are received.
If i run it as background job then it has to be run for a specific set of materials or for all the materials in the plant.
But my need is whenever I receive Goods through MIGO, I need to run V_v2 automatically for the material for which i received goods.
Hope its clear now...
Thanks,
sre

Similar Messages

Need to run the BDC job immediately after XK02 is saved.

Hi all.
I have to trigger a batch job (BDC program) after changing the customer thru xk02 TRANACTION.
I found one exit EXIT_SAPMF02K_001 which checks before saving. But my requirement is job (BDC prog) should run after saving. So I guess its of no use. Do we have any BADI ( method)....?Can you pls let me know how to procede.
If workflow is the solution...
I have run the event traces by transaction code swel & sels, I could not find any event triggering to tigger the workflow ( to perform background task) Do I need to create Change document & BOR for acheiving this thru workflow .
Cheers,
sami.

Hi Neha.
Thanks for quik turn around. But I need this z program to run after all changes are done in XK02 because I need to use the changed vendor data in the BDC program. This is the exit which triggers before save, so I couldn't get the changed vendor data from database table to use in z program (BDC).
Hope I am clear.
Cheers,
sami.

Need to run the JOB without Ineractive Screen

Dear All,
We have written a new ABAP program for executing the Macro background Job and used JOB_OPEN,JOB_SUBMIT and JOB_CLOSE Function Modules to run the JOB from ABAP Program. We are able to run the JOB successfully for Any other ABAP Programs through the custom program, but when I tried with the same approach to run the Macro job through my new ABAP Program the JOB is throwing an error.
Error Message is like below
Job started
Step 001 started (program /SAPAPO/TS_BATCH_JOB, variant TEST, user ID GKMN3511
Specify a start time
Job cancelled after system exception ERROR_MESSAGE
Point of doubts:
-- Can we really execute the Macro job through the ABAP program with out any dialogue screen (because when I use the "/SAPAPO/MC8G - Schedule Demand Planning in the Backgroundu201D program in my custom program it pop-ups a interactive screen which I don't want in my ABAP program while scheduling the macro job)
Regards,
Raju

In transaction /sapapo/mc8t --> define the activity that looks at the macro in question
In transaction /sapapo/ mc8d --> define the job that looks at that activity and a selection iD/aggregation level
In transaction /sapapo/ts_batch_run --> save a variant pointing to the job defined in mc8d
you can then run the /sapapo/ts_batch_run job with that variant

I need to run the job every 8th of the month

Hello,
Can you please help me out to run the oracle job every 8th of the month.
Thanks in advace
Kind reagrds,
Nick

Untested, but I'd say the repeat_interval clause of dbms_scheduler.create_job should be something like:
'FREQ=MONTHLY;BYMONTHDAY=8;'

Do I still need to run the catupgrd.sql??

Hi
I would like if I install the Oracle in the following procedure, do I still need to run the catupgrd.sql.
1. Install Oracle 10.2.0.1 software only( i.e. without create any database instance)
2. Install Oracle 10.2.0.2 patch
3. Create an Oracle Instance using DBCA
Do I still need to run the catupgrd.sql for the newly created database instance?
Denis

Do I still need to run the catupgrd.sql for the newly created database instance?No, you don't. Because database was created on already patched software.

Need to run the report in different languages

Hi All,
i need to run the Bex report in different languages (SAP-BI). to maintain the Language plase give me the tables name.
To maintain Query Description :Table?
To maintain Desription of Key fig and CKF and RKF : Tables
Regards
Srinu

thanks for replying, but i tried this option too, it did not work for me, neither isnull nor coalesce. I mean, the solution work for single value but when i pass multiple values then separated by a comma then it doesn't work and shows me an error like "Incorrect Syntax ','". I am using SQL server as DB and bip is 10.1.3.4.1
also please share the SR number, so i can also check the same.
can there be any other work around to this?
thanks,
ronny

I need to run the program in back ground and then update two fields

hi gurus
i need to run the program in back ground and then update two fields in the z table by mm02 transaction by using bapis , can any one give me the code for this.
Message was edited by:
Rocky

hi
good
go through this link
http://www.sapdb.org/7.4/htmhelp/34/ee7fba293911d3a97d00a0c9449261/content.htm
thanks
mrutyun^

Read Error logs after running the background jobs

Hi,
How to read the error logs after running the background jobs. In our scenarion we are running the COHV transaction to release the production orders in background. But we are not finding the error logs after background job. We would like to read the error logs and correct for further processing.
Kindly suggest.
Thanks & Regards,
N. Laxman

Hi
you can check the back ground jobs defined by any user in SM37 and where you can see the spool and job logs as well.
plz check in your case and revert back
Regards
Anupam Sharma

Changes made to .css file in adf application, Does need to run the page again

Hi Gurus,
Please explain me, Changes made to .css file in running adf application, Does need to run the page or just refreshing page from browser will pickup the changes for oracle ADF 11g R2.
Warm Regards,
Md Jahangir Pasha

Hi,
you have to set CHECK_FILE_MODIFICATION parameter value to "true" on web.xml file.
<context-param>
<param-name>org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION</param-name>
<param-value>true</param-value>
</context-param>

What version of Mac OS do I need to run the latest version of InDesign 10.10 using Creative Cloud

What version of Mac OS do I need to run the latest version of InDesign 10.10 using Creative Cloud

No. You do not need to go to 10.10, but it’s probably best to so to avoid this again for some time.
That said, any machine still running 10.6 has got to be pretty old and lacking power to run the new apps.

Cron job help- Need to run the Autobuddy command every night...

I have not written anything in the form of a Unix script for YEARS and YEARS. Our XServe was built in Advanced mode, currently running 10.5.4 Server. On this box, we are running Wiki and iChat. Since we built this box as an Advanced box the "Autobuddy" option was not available.
I have since enabled it at the command line, but I am told by Apple that there still needs to be a command run after every time a user logs in if you want others to Autobuddy. That command is this:
"sudo /usr/bin/jabber_autobuddy -m"
Now I think this would be pretty easy to setup as an automatic cron script, but like I said, I have not written something like this in forever. Not to mention, I am not 100% sure what needs to happen since running the script with an sudo command will prompt for the root password.
I was wondering if anyone would be able to help me write the script up, and give me some instructions on how to install it. I just want it run everyday, midnight is fine, I don't really care. All I know is that we have a dept of 150 people, and it grows and shrinks all the time. They can deal with a new user not being seen for 24-48 hours, I just want to get this automated.
Any helps would be GREATLY appreciated!
Thanks
Tom

If you want to keep it simple try [CronniX|http://www.abstracture.de/projects-en/cronnix] a graphical tool for setting up CRON jobs on OSX. Whilst I have not actually done an autobuuddy in this way, I cannot see any reason why it will not run as a Cron Job.
The proper way ideally would be to use the launchd service.
Something like this should work:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>org.jabber.dailyautobuddy</string>
<key>ProgramArguments</key>
<array>
<string>/usr/bin/jabber_autobuddy</string>
<string>-m</string>
</array>
<key>LowPriorityIO</key>
<true/>
<key><UserName></key>
<string>admin</string>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>0</integer>
<key>Minute</key>
<integer>05</integer>
</dict>
</dict>
</plist>
(not sure why, but tabs are not showing up, making this hard to read)
Message was edited by: Tim Harris

Need to run the package

Hi friends,
i need to run a package which will send a mail as soon after it runned. I have a package. But i need to run that package for each and every 10 min in a day. For that how i can create a job to execute that package.
As a result of the job for each and every 10 min ill be receiving a mail. How to create a job to execute my package for every 10 min.
Regards,
Mini

Hi srikanth and hoek,
Thanks for your reply.
i dont know why the job is not running and executing the package.
if i compiled the package separately means, i can able to execute it successfully and also im receiving mails correspondingly.
begin
it_check_overdue_issues.email_overdue;
end;But if i tried to execute the above package using a job means, it is not running corresponding to the time and also not receiving emails. This is my DBMS_JOB query that i used, it is compiling successfully without errors, but not working what is wrong with it.
DECLARE
    jobno number;
BEGIN
    DBMS_JOB.SUBMIT(
        job => jobno,
        what => 'BEGIN it_check_overdue_issues.email_overdue; END;',
        next_date => SYSDATE,
        interval => 'SYSDATE + (2/1440)');
    COMMIT;
END;Regards,
Mini

How to run the V3 job?

Hi,
Please let me to know how to run the pending V3 jobs.
Scenario : Inventory controlling extraction
Regards
Santhosh kumar N

Hi,
In LBWE --> 03:Inventory -->click on Job Control, and click on Start Date, and give your parameters i,e, date and time and also give Periodic values, i.e. ever day or after some hours like that and then Click on Print param then Click Schedule Job. Then check the status in SM37.
After suceess then check in RSA7. And load data in BW.
Note: For every day delta loads, you need fix Periodic values, because every day you need not to go LBWE and run manually Immediate option. And also loads will happen in night only. So schedule it and also set Processc hain in BW for Loads.
Thanks
Reddy

Why MicroSoft 2000 SR needed while running the script using test manager???

hi all,
whenever I trying to run a script using test manager,one POP-UP comes which starts installing MICROSOFT 2000 SR.
and in few seconds it complaining for some missing component,
can any body tell me why it is happening.
what is the need of Microsoft 2000 SR while running the script in test manager.
tnx
USOni

USoni
I have seen that problem happening before, even that i was never able to figure out why, something that you can try is changing the service log in credentials for both:
Oracle Application Testing Suite Agent Service
Oracle Application Testing Suite Application Service
and use a proper user with admin rights.
let me know if that helped
Regards
Alex

Call CR XI from C++ routine, need to run the report without display and send the resulting report to the printer

<table border="0" cellspacing="0" cellpadding="0" width="100%" height="100%" id="HB_Mail_Container"><tbody><tr width="100%" height="100%"></tr><tr><td height="1" style="font-size: 1pt"></td></tr></tbody></table><blockquote><table border="0" cellspacing="0" cellpadding="0" width="100%" height="100%" id="HB_Mail_Container"><tbody><tr width="100%" height="100%"><td id="HB_Focus_Element" width="100%" height="250" valign="top"><p>I initiate a CR XI from a C++ routine using ShellExecute command, the report file is opened and the C++ program continues to execute, this is working fine, now I need the following two things:</p><p>1. When the report is invoked I would like it to run and print the result either to a printer or to a file.</p><p>2. I need to send the report parameters since it will not prompt for it if it runs automatically.</p><p>Thanks in advance for your help.</p></td></tr><tr></tr></tbody></table><blockquote><table border="0" cellspacing="0" cellpadding="0" width="100%" height="100%" id="HB_Mail_Container"><tbody><tr width="100%" height="100%"><td id="HB_Focus_Element" width="100%" height="250" valign="top"><p> </p></td></tr></tbody></table></blockquote></blockquote>

Please re-post if this is still an issue to the Legacy Application Development SDKs Forum or purchase a case and have a dedicated support engineer work with you directly

Need to run the rescheduling job V_V2 whenever goods are received

Similar Messages

Maybe you are looking for