Need to run "udevadm trigger" again after startx
I rearranged some keyboard modifiers according to instructions found here:
https://wiki.archlinux.org/index.php/Ma … etkeycodes
Everything works except that when I start X11 (with startx), then I have to run "udevadm trigger" again to get the new modifiers working. This is the case for both my laptop and USB keyboards.
Any ideas?
$ cat /etc/udev/hwdb.d/10-my-sane-modifiers.hwdb
keyboard:usb:* # match all keyboards for now
keyboard:usb:v05AFp8277* # but especially my Kensington Slim Type
KEYBOARD_KEY_70039=leftalt # bind capslock to leftalt
KEYBOARD_KEY_700e2=leftctrl # bind leftalt to leftctrl
keyboard:dmi:* # laptop keyboard
KEYBOARD_KEY_3a=leftalt # bind capslock to leftalt
KEYBOARD_KEY_38=leftctrl # bind leftalt to leftctrl
Hi Neha.
Thanks for quik turn around. But I need this z program to run after all changes are done in XK02 because I need to use the changed vendor data in the BDC program. This is the exit which triggers before save, so I couldn't get the changed vendor data from database table to use in z program (BDC).
Hope I am clear.
Cheers,
sami.
Similar Messages
-
Do I need to run a malware scan after removing uTorrent?
I know this is a dumb question, but I don't know of any malware scan sites for Mac that I trust. I'm using Mavericks and my OS is up-to-date. Do I need to run a malware scan after uninstalling uTorrent? If so, where would I get one I can trust?
Here is my scenario - On a recommendation (which I no longer trust) I installed uTorrent, as I wanted to download a file that was only available in torrent form. (This file is a legally available file, so I would not be violating copyright.)
What made me worry was the when I downloaded uTorrent, it installed without asking me to enter my admin password. This raised a red flag for me. So I immediately uninstalled uTorrent, by moving the Application to trash.
So, now that I have it uninstalled, is there a danger it may have left unwanted files on my Mac?
I don't see any evidence of unwanted files. Just wondering. Am I worrying for nothing?darrenfromoakland wrote:
I don't know of any malware scan sites for Mac that I trust.
There aren't any. It is not possible to scan one's computer from a web-site, they are all scams. All or most of the Windows sites are, as well.
when I downloaded uTorrent, it installed without asking me to enter my admin password. This raised a red flag for me. So I immediately uninstalled uTorrent, by moving the Application to trash.
So, now that I have it uninstalled, is there a danger it may have left unwanted files on my Mac?
Many applications can be installed without the need for an admin password since they don't need to install files in any common or system locations. As long as everything goes into the Applications folder and your user folder, you should never need admin permissions.
uTorrent itself is a perfectly legit application that can be used for illegal activities, like all BitTorrent apps. I'm sure it comes with an Apple developer ID signature and under normal circumstances should not be able to harm your OS X or it's applications. But to some extent it depends on where you obtained the app itself. Any app you obtain from AppStore, a legit developer site or MacUpdate should be just fine. If you got it from C|Net's download.com or Softonic then it may have come with an installer that will also install annoying adware. It would have notified you that it was being installed (and again, no admin password is required), but a large majority of users never read those dialogs and blindly click through them to get their app installed and in use as soon as possible. If you think the latter is a possibility, then the Adware Removal Guide that Carolyn tipped you to has a Adware Removal Tool that should make quick work of anything like that. -
Updating Comms 6 GA to U2, do I need to run comm_dssetup.pl again?
I'm planning on upgrading our Comms 6 server from GA to U2.
Do I need to run comm_dssetup.pl if I already ran it under Comms 6.0 GA?
I read [the wiki|http://comm_dssetup.pl] and get the impression that this is required if you are going from a non 6.0 version of comms. Further clarification here or in the wiki would be great.karl.rossing wrote:
Can i run commpkg upgrade and upgrade comm_dssetup.pl and Delegated admin before taking an outage to upgrade for the rest (mail, calendar, convergence and IM) of the components.The first step will be to run ./commpkg upgrade to upgrade dssetup (and only dssetup) and then run the comm_dssetup.pl command. This will result in the Directory Server being restarted after the schema changes have been applied (short outage period assuming everything goes smoothly).
Once you have upgraded dssetup you can then run ./commpkg upgrade again to upgrade just Delegated Administrator. This will automatically deploy the updated version into the web-container. You will need to restart the web-container after the upgrade process has concluded.
Are there any side effects from taking delegated admin offfline while the rest of comms is running.Where have you deployed Delegated Administrator? Is it in the same web-container as Convergence and UWC/CE?
Regards,
Shane. -
Do I need to run anti-viral program after trying to open a spam attachment?
I was tricked by a spam email and clicked on a link, which did not open. I've been advised to delete the email (done), change my password (done), and run anti-viral program (not done, and never have). What, if anything, should I do?
You don't need to run antivirus software after that. Just be more careful in the future.
(114282) -
Changes made to .css file in adf application, Does need to run the page again
Hi Gurus,
Please explain me, Changes made to .css file in running adf application, Does need to run the page or just refreshing page from browser will pickup the changes for oracle ADF 11g R2.
Warm Regards,
Md Jahangir PashaHi,
you have to set CHECK_FILE_MODIFICATION parameter value to "true" on web.xml file.
<context-param>
<param-name>org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION</param-name>
<param-value>true</param-value>
</context-param> -
i got windows xp home to work on the new mace book i got but when i try to install boot camp it say that i need windows xp service pack 2 or windows vista. what do i do now, i cant get mac osx to work, do i have to reformat my mac?
pleas help
ryanInsert the MacOSX DVD. Ignore what Windows wants.
Find a way to shut down or restart, even if you have to do a power button crash shutdown.
To boot from the DVD on the next start up of the Mac, at the sound of the chime, hold and continue to down the 'C' key until you see the grey apple logo. This will be the sign that the DVD is booting the computer.
OR,
On the next start up of the Mac, hold down the Opt/Alt key until the boot loader shows all your bootable options. Chose the MacOSX DVD.
Using the second option of starting up with the boot loader, you might see an available MacOSX to boot from. Maybe you have not hosed the MacOS after all. Choose the MacOSX partition instead to see whether it is corrupted or not. I say to do this because you may not have known that in Windows in the tray area there is a Boot Camp Utility. You could use the utility to select the operating system you want to boot from. If there is no MacOSX to boot from, then yes, it is probably hosed. -
Need to run 2 concurrent programs after completing child concurrent program
Hi,
Could you suggest me on below:
R12/ 11g
I have main concurrent program MAIN_CONC_PG.
In this concurrent program there is a child concurrent program CHLD_CONC_PG.
This child concurrent program will run for parameters 1,2,3,4,5.
CHLD_CONC_PG program will run simultaneously 5 times:
CHLD_CONC_PG ==> 1
CHLD_CONC_PG ==> 2
CHLD_CONC_PG ==> 3
CHLD_CONC_PG ==> 4
CHLD_CONC_PG ==> 5
Now, after completion of above 5 Child Concurrent programs i have to start 2 more concurrent programs using fnd_request.submit_request:
1) Item Attributes
2) Vendor populate
Thanks.931832 wrote:
yes, both the Conc Programs are part of Main Conc Prog.
1) Item Attributes
2) Vendor populate
I should be using FND_CONCURRENT.WAIT_FOR_REQUEST.
any sample code that uses FND_CONCURRENT.WAIT_FOR_REQUEST ??
IN my Main Conc Prog, i have below child conc prog. after completing below program i have to run 1) Item Attributes 2) Vendor populate conc progms.
FOR i IN 1..v_count
LOOP
v_request_id := fnd_request.submit_request(application => 'XXDH',
program => 'XXPTN_ITEM_ORDR_E',
description => NULL,
start_time => NULL,
sub_request => FALSE,
argument1 => i);
END LOOP;Hi,
You can also try something like this.
declare
l_reqid_tab is table of number index by pls_integer;
l_reqid_tbl l_reqid_tab;
function program_successful ( p_conc_req_id number ) return boolean
is
l_finished boolean;
l_phase varchar2 (100);
l_status varchar2 (100);
l_dev_phase varchar2 (100);
l_dev_status varchar2 (100);
l_message varchar2 (100);
begin
if p_conc_req_id > 0 then
l_finished := fnd_concurrent.wait_for_request ( request_id => p_conc_req_id
,interval => 5
,max_wait => 0
,phase => l_phase
,status => l_status
,dev_phase => l_dev_phase
,dev_status => l_dev_status
,message => l_message );
commit;
if upper(l_dev_status) in ('WARNING', 'ERROR') and upper(l_dev_phase) in ('COMPLETE') then
return false;
elsif upper(l_dev_status) in ('NORMAL') and upper(l_dev_phase) in ('COMPLETE') then
return true;
else
return false;
end if;
else
return false;
end if;
end program_successful;
begin
for i in 1..v_count loop
l_reqid_tbl(i) := fnd_request.submit_request....
end loop;
for i in 1..l_reqid_tbl.count loop
if program_successful(l_reqid_tbl(i)i) then
null;
end if;
end loop;
-- code to submit your other program here.Hope this helps.
Regards,
Allen
Edited by: Allen Sandiego on Jun 18, 2012 9:47 AM
Made some modifications since number of spawned child requests is variable. -
Do you always need to run enable-cstopology/bootstrapper after update?
If I look at the instructions for the January updates:
http://support.microsoft.com/kb/2809243/
I can see that it says you have to run "Install-csdatabase". But as far as I can see you dont need to that because the database are already at the correct level.
http://blogs.technet.com/b/dodeitte/archive/2013/07/02/how-to-verify-if-lync-server-2013-database-updates-completed-successfully.aspx
My question is if the last part about mobility and running bootstrapper is also redundant since I already have mobility enabled?
I guess the information is there since it is a cumulativeupdate so if you have not installed any of the previous updates you have to run both the database update and enable the mobility service?At the beginning of the KB article it does say which steps have to be run depending on the current version of Lync Server.
"To install updates for a Lync Server 2013 installation that has the July 2013 cumulative update (5.0.8308.420) or a later update installed,
you must perform the following step 1.
To install updates for a Lync Server 2013 installation that has the February 2013 cumulative updates (5.0.8308.291) installed, you must perform
the following steps 1 and 2.
To install updates for Lync Server 2013 RTM (5.0.8308.0) you must perform the following steps 1-5."
Step 1: Install CU
Step 2: Back end database updates
Step 3: CMS database update
Step 4: Enable Mobility service
Step 5: Enable UCWA
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator (BETA) - Used to assist in the validation and documentation of Lync Server 2013. -
SAPEVT not running to trigger RDDIMPDP after ECC 5.00 upgrd
I'm back now having issues with Transports. Here is what I have done and what I see.
Have looked to Note # 936602,
385498. Have downloaded and applied SAPEVT p7 latest kernel, tp, r3trans and LIB_dbsl and applied still no
help. Tp is sitting with SIGW in job log I find the following.
(i 63028) spawn_ile:
program "/usr/sap/tmp/as4exec_dummylinks/SAPEVT
63028" does not
exist
(i 63028) spawn failed (see joblog)
Why is Tp trying to execute SAPEVT from here?
Any help here greatly appreciated Udo
SAP OSS has been sitting on this for over 1 week now.Sorry can't really help with a solution, but did you try running rddimpdp manually? If that will continue the import you could schedule it periodically maybe every 5 min. At least in that way you can get you transports imported until SAP comes up with a solution.
-
I want to upgrade my MacBook Pro 5,2 to Lion, but specs says i need intel core 3 and i have intel core 2, there will be a problem? my computer will run slow? I will need to reinstall my programs again?
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro5,2
Processor Name: Intel Core 2 Duo
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 8 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP52.008E.B05
SMC Version (system): 1.42f4
Sudden Motion Sensor:
State: EnabledCheck to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.
Application Compatibility
Applications Compatibility (2) -
I am running 10.6.8 and using iweb for my web site. After several SEO analysis they all indicate I need H1-6 header tags. After looking at the source code I see there are none in iweb. Are they necessary to add? Why would one add these tags and how do I add H Tags to iweb? And are there examples to look at? I am slowly learning about simple web design and assumed that iweb was stand alone without having to write code. Is this one of the reasons iweb is no longer supported? Thanks for looking at this!
A simple text page like this:
Heading
sub heading
text paragraph ....
Is traditionally represented by html tags like:
<h1>Heading</h1>
<h2>sub heading</h2>
<p>text paragraph ... </p>
I would guess that the use of h1-h6 tags helps search engines to understand the structure of a page as the tags imply a certain structure.
This can be compared to more generic tags like <div> that could represent any kind of content - and may be what iWeb uses (you'll have to check yourself).
I would generally recommend that you use some kind of up to date blog/site building tool, perhaps Wordpress or Squarespace (I haven't used either one myself) that support current web technologies - this should reduce your SEO issues and make it easier to properly support mobile/tablet users. -
After a recent hard drive crash I needed to authorise my pc again. I first de-authorised all previous computers (there was no other option)
Then I authorised the pc with the new hard drive.
then I tried to sync
Then itunes tells me iphone cannot sync as pc not authorised.
when I try to authorise the pc, itunes tells me pc is already authorised...
I have been playing this game 10 times now ... "cannot sync because pc not authorised" and then "cannot authorise as already authorised"
what can i do?
thanksyes, a few times. the number of authorised computers decreases and increases from zero to one and vice versa accordingly. yet I am still being told that it cannot sync.
-
After installing the latest Zone Alarm Extreme v10, on windows 7 x64, when I close firefox, the window closes but firefox.exe 32 remains running in the background, which makes that when I want to open firefox again, after about a minute I get the error that an instance of firefox is still running. I go to task manager and end task of firefox.exe 32 and then open firefox again.
This is now happening regularly.This seemed to come out of the blue, very much as described by anima42. I also am a Ubuntu 10.04 user. I have pondered on the first reply above, and though I don't, and didn't, use Tabberwocky, I was using Tab Mix Plus. Having removed this, the problem seems to have gone away. Another possible clue as to what went wrong: I use a constant Firefox profile located in my home directory. I dabbled with Ubuntu 11.04 a week or so ago, which runs (I think) a more updated Firefox. This Firefox was operating on my default profile, as you would. It may have broken something so it now doesn't play nicely with the 10.04 setup. Just surmising.
-
Do we need to run catbundle.sql for ANY new db we create after CPU's?
We're in the middle of reviewing the JAN2009CPU readme, and found a curiosity in the patch notes.
- Our platform is Oracle 10.2.0.4 Enterprise Edition on Solaris 10 64-bit.
In the Post-Patch instructions for the CPU, we see the following clause
{color:#3366ff} ...
3.3.5, "Post Installation Instructions for New and Upgraded Databases"
These instructions are for both non-RAC environments and RAC environments
when a database is created or upgraded after the installation of CPUJan2009.
You must execute the steps in Section 3.3.2.1, "Loading Modified .sql Files
into the Database"" and Section 3.3.2.2, "Recompiling Views in the Database"
for *any new database that was created* by any of the following methods:
- Using DBCA (Database Configuration Assistant) to select a sample database (General, Data Warehouse, Transaction Processing)
- Using a script that was created by DBCA that creates a database from a sample database
- Cloning a database that was created by either of the two preceding methods,
and if Section 3.3.2.1, "Loading Modified .sql Files into the Database"
was not executed after CPUJan2009 was applied.
Upgraded databases require no post-installation steps to be executed.
{color}
I don't understand -- does this mean we have to do the following any time
we create a new database from now on?
- run dbca
{color:#ff0000} - run '@?/rdbms/admin/catbundle.sql cpu apply'
- check $ORACLE_HOME/cfttoollogs/catbundle/catbundle_CPU_<SID>_APPLY_<TimeStamp>.log for errors
- run '@?/cpu/view_recompile/view_recompile_jan2008cpu'{color}
I would have thought that the new SQL scripts under $ORACLE_HOME are already
upgraded, so that we do not *have* to do any extra work on top of simply running
dbca to create a new DB.
I see a similar phrase in the CPU2008JUL (patch 7150470):
{color:#0000ff} "You must execute the steps in this section (Section 3.3.2.1,
"Loading Modified .sql Files into the Database") for any new database you create
or any database upgraded to this release since the CPUJul2008 patch was applied."
{color}
.. AND CPU2008OCT (patch 7375644):
{color:#0000ff} You must execute the steps ... for any new database you create or
any database upgraded to this release since the CPUOct2008 patch was applied.
{color}
.. but the April 2008 CPU (patch 6864068) doesn't have these clauses.
Can anybody clarify this issue? Have you created DB's after the JAN2009 CPU
and not run the catbundle.sql, had any problems?
Edited by: lrp on Feb 4, 2009 2:45 PMlrp wrote:
We're in the middle of reviewing the JAN2009CPU readme, and found a curiosity in the patch notes.
- Our platform is Oracle 10.2.0.4 Enterprise Edition on Solaris 10 64-bit.
In the Post-Patch instructions for the CPU, we see the following clause
{color:#3366ff} ...
3.3.5, "Post Installation Instructions for New and Upgraded Databases"
These instructions are for both non-RAC environments and RAC environments
when a database is created or upgraded after the installation of CPUJan2009.
You must execute the steps in Section 3.3.2.1, "Loading Modified .sql Files
into the Database"" and Section 3.3.2.2, "Recompiling Views in the Database"
for *any new database that was created* by any of the following methods:
- Using DBCA (Database Configuration Assistant) to select a sample database (General, Data Warehouse, Transaction Processing)
- Using a script that was created by DBCA that creates a database from a sample database
- Cloning a database that was created by either of the two preceding methods,
and if Section 3.3.2.1, "Loading Modified .sql Files into the Database"
was not executed after CPUJan2009 was applied.
Upgraded databases require no post-installation steps to be executed.
{color}
I don't understand -- does this mean we have to do the following any time
we create a new database from now on?
- run dbca
{color:#ff0000} - run '@?/rdbms/admin/catbundle.sql cpu apply'
- check $ORACLE_HOME/cfttoollogs/catbundle/catbundle_CPU_<SID>_APPLY_<TimeStamp>.log for errors
- run '@?/cpu/view_recompile/view_recompile_jan2008cpu'{color}
I would have thought that the new SQL scripts under $ORACLE_HOME are already
upgraded, so that we do not *have* to do any extra work on top of simply running
dbca to create a new DB.
I see a similar phrase in the CPU2008JUL (patch 7150470):
{color:#0000ff} "You must execute the steps in this section (Section 3.3.2.1,
"Loading Modified .sql Files into the Database") for any new database you create
or any database upgraded to this release since the CPUJul2008 patch was applied."
{color}
.. AND CPU2008OCT (patch 7375644):
{color:#0000ff} You must execute the steps ... for any new database you create or
any database upgraded to this release since the CPUOct2008 patch was applied.
{color}
.. but the April 2008 CPU (patch 6864068) doesn't have these clauses.
Can anybody clarify this issue? Have you created DB's after the JAN2009 CPU
and not run the catbundle.sql, had any problems?
Edited by: lrp on Feb 4, 2009 2:45 PMIt's pretty explicit:
*You must execute the steps* in Section 3.3.2.1, "Loading Modified .sql Files
into the Database"" and Section 3.3.2.2, "Recompiling Views in the Database"
for any new database that was created <b><i><u>by any of the following methods</u></i></b>:
- Using DBCA (Database Configuration Assistant) to select a sample database (General, Data Warehouse, Transaction Processing)
- Using a script that was created by DBCA that creates a database from a sample database
- Cloning a database that was created by either of the two preceding methods,
and if Section 3.3.2.1, "Loading Modified .sql Files into the Database"
was not executed after CPUJan2009 was applied.
So, if you create a database by any of the explicitly listed methods (all of which are creating a database from a backup that my have been made of a database that was not patched to that level) then you need to run the scripts. If you create a database by some other method (about all that is left is a command line CREATE DATABASE) then part of that creation will necessarily include running the necessary cat* scripts, which will already be at the correct level. -
Do I need to download Adobe Acrobat XI Pro again after using the software on a 30-day trial basis?
Do I need to download Adobe Acrobat XI Pro again after using the software on a 30-day trial basis?
You mean, if you now buy it? No. You can enter a license or sign in if you have a subscription and the trial is unlocked.
Maybe you are looking for
-
Application installation issue
I am trying to install an application called Teamsite on Solaris. I have successfully gunzipped the files to a directory 'Teamsite'. Now according to the installation manual, I need to run the following command to start the Teamsite installation: # .
-
How to improve speed of laptop
how to increase speed of laptop
-
How to convert nagative integer to positive integer.
int i= (int)System.currentTimeMillis(); System.out.println(i); The result is nagative such as; -585450145 How to convert nagative integer to positive integer.
-
I was wondering if there is a way to use the hand tool (or spacebar) even if the entire image is visible, like you could do in previous versions. One might wonder why you would want to pan if you can already see the entire image. This comes up when o
-
Boot Camp doesn't detect keyboard
Here's what happens: I start the Boot Camp assistant. It downloads the latest software from Apple, creates the driver disc (successfully). It then asks to reboot, which I do. Upon reboot, I am presented with a black screen asking me what CD option I'