Need to see MAC addresses connected directly to AirpOrt Extreme

I need to see my MagicJack MAC address so I can reserve it an I.P. address or something.
Anyone know how to see what mac addresses are connected? I know how to see which wireless addresses are connected, but wired ones.
Thanks.
Dwaine

AirPort Utility in Lion does not display MAC address information for connected wired clients. The MAC address for the MagicJack should be on a label on the back or bottom of the device.
If you are still using Lion, you have the option to download and install AirPort Utility 5.6 for Mac OS X Lion
Open AirPort Utility, select the AirPort Extreme and click Manual Setup
Click directly on Wireless Clients near the bottom of the summary page to see Wireless Clients. Click DHCP Clients to see wired devices.

Similar Messages

Add IP address ranges to my airport extreme firewall white list.

I need to add IP address ranges to my airport extreme firewall white list. This is so Security Metrics can access my computer and approve a scan for my credit card PCI compliance. How do i add ip ranges?

Sorry, but this option is not available with the AirPort routers. The only control you have over the AirPort's NAT firewall is either to enable/disable it or to configure it for Port Mapping. There are no option that supports whitelisting/blacklisting IP addresses/ranges.
If this is an important requirement, you may need to replace your current AirPort with another vendor's product that will support this.

Need to add MAC address to router

Any ideas on when you get an error message and how I remove the ACL (access control list)
Try to setup the extender on the same room where the router is installed.
- If MAC Access list of MAC Filtering is enabled on the router, make sure to add the MAC address of the extender.
- Try to turn off and turn on all of your devices to refresh the network.
Need to add MAC address to router somehow
I am tryign to follow Netgears's kb
http://kb.netgear.com/app/answers/detail/a_id/22034

What model Fios router do you have?
If it's an Actiontec I belive you cannot do what you are attempting to do as it's not supported on that router
See
https://forums.verizon.com/t5/Home-Networking/Actiontec-router-does-not-support-wireless-range-exten...

I have just bought a Humax PVR and Humax W-Lan dongle to connect to my Airport Extreme. I have put the mac address into the AE. The installation screen is picking up my network name no problem but it won't connect to the internet. Can anyone help please?

I have just bought a Humax 7500T PVR and a Humax W-Lan dongle to connect to my Airport Extreme.
I have put the mac address into the AE. The installation screen on my TV is picking up the network name but once appied it won't connect to the internet.
I've a few other things connected to the AE such as computers, ipad, itouch, etc, and have never had a problem connecting these once I've entered the mac address into the AE. Can anyone help me with this please?

have you made sure that the network setting in the system preferences is set up to use dhcp? if not i would try changing it so that it shows that it is getting its address by dhcp

How to see mac address in IPS 4240 ???

Hi all,
How to see mac-address of inline-vlan-pair ? and how to see mac-address of management interface in IPS ?
Regards,
Kiran

Hello Kiran,
The inline-vlan-pair itself is tied to a particular interface. So you're really asking for the MAC address of the interface associated with the inline-vlan-pair.
The MAC address of sensing ports will be added to a "show interfaces" via CSCse84414. You can currently view the MAC address of sensing interfaces by doing an "ifconfig -a" from the service account.
Thank you,
Blayne Dreier
Cisco TAC IDS Team
**Please check out our Podcast**
TAC Security Show: http://www.cisco.com/go/tacsecuritypodcast

Can't see MAC address on LAN

Issuing the arp -a command in terminal (Mac OS) shows all MAC addresses connected to my LAN. However the network extender MAC address doesn't show. Any idea why not?

it jsut started working...

HT201250 Can I use Time Machine to backup a LaCie Hard Drive connected to an Airport Extreme onto a My Book that is connected directly to a Mac Mini?

I have a LaCie 2TB hard drive connected to a Airport Extreme Base Station. I also have a 1TB MyBook connected to a Mac Mini. My question is can you backup selected files (photos) from the LaCie drive to the MyBook drive using Time Machine, or any other software? If it will cost a fortune, I guess I can always just copy the newer files over.

Thank you for such a lightning-fast response Niel :-) Can I just double check with you the following ...?
The external drive where my iPhoto library is located has three partitions - Time Machine Backup, Pictures (where the iPhoto library is located) and SuperDuper Bootable Clone.
When you say 'Remove the external drive from the list of items set to be excluded from the backup, and then add everything else on it' - am I correct in thinking that I should remove Pictures partition from the items to be excluded but leave the Time Machine Backup and SuperDuper Bootable Clone as excluded items?
On my 2TB external drive (the one I'm backing up to) there are 5 partitions - Time Machine Backup, SuperDuper Clone, Pictures, Photo Archive and Document Archive. The Time Machine Backup is 700GB of which I still have 473GB available - when I include the Pictures folder that contains the iPhoto library that will use up another 148GB but I think there's still plenty of room to use it.
When you say if the partition contain the iPhoto library isn't dedicated to it it may be easier to create one which is, the only item I have on the Pictures volume is the iPhoto library so I think that it's dedicated to it. I was going to add images from the Pictures folder on my MacBook Pro but haven't done so at this stage so I won't do so. It wouldn't matter though, would it, if I copied the images from the Pictures folder on my MBP to the 'Photo Archive' partition of the EHD?
Thank you once more for your reply.
Tricia

Is it possible to have two hard drives connected to my airport extreme and use one to store my itunes library/iphoto and the other to backup via time machine? Will the second (larger) drive back-up both my mac HD and my other external airport drive?

For the past year I've been using an external hard drive (HD1) connected to my airport extreme as the back-up location for time machine. This has worked fine without any issues. What I would like to do now is to move my itunes and iphoto libraries off of my laptop (space constraints) and store them on a second external hard drive (HD2) connected to the airport extreme. I have successfully connected the second hard drive using a Belkin powered USB hub. What I am wondering is if I direct my time machine back-ups to HD1 will it back-up both my mac HD as well as HD2? I apologize if this has already been answered but i've read conflicting responses on various message boards and a number of responses were dated so I wanted to make sure I received the latest information.
thank you

kosty wrote:
For the past year I've been using an external hard drive (HD1) connected to my airport extreme as the back-up location for time machine. This has worked fine without any issues.
That may be true, but you need to know that backing-up that way is unreliable and not supported by Apple. See: Using Time Machine with an Airport Extreme Air Disk. Do not be surprised if those backups suddenly turn up corrupted.
What I am wondering is if I direct my time machine back-ups to HD1 will it back-up both my mac HD as well as HD2?
No. Time Machine cannot back up from any network location. The 3rd-party utilities CarbonCopyCloner and ChronoSync may be workable alternatives.

Computers can't see the disk connected to my Aiport Extreme

Hi everyone,
I have an Airport Extreme with version 7.3.2 and I just attached a Western Digital external hard drive to the usb port in the back of the router; however, none of my computers can see the disk in the network screen nor the airport router itself. Does anyone know how I can fix this so that I can share the disk with all of my computers?
This is how my network is set up:
I have six computers connected to a Linksys WRT310N wireless router (some with ethernet cables, others wireless). Then, I have the Airport Extreme, in bridge mode, connected to the Linksys router by an ethernet cable. And the external disk is attached to the Airport Extreme.
It sounds complicated, but I talked to an Apple "Genius" a while back and he told me that only Mac computers are able to see the disk through the Time Machine program. That hardly seems right or fair to me.
Thanks for your help!

On July 15, 2008 someone posted this: "On my air port extreme I have a 160 Gb hard drive connected to the usb. And suddenly it cant find it on my desktop. But when I go to my lap top it finds it just like that. Im runnin the airport 10/100 ethernet to my desktop and 802.11 n/g on my lap top. I tried resetting..."
This is identical to my problem, the hard disk that is connected to the Airport Extreme shows up on the old iBook but not on the MacBook Pro. Both are running OS 10.4.11. It worked fine when it was connected directly to the MacBook Pro and contains the same files it held then.
Can anyone answer this problem?

How do I get my macmini running Mountain Lion to see my Canon USB printer connected to my Airport Extreme? I have a macbook pro running leopard and that works fine. The versions of airport utility are different and I can't even see the printer from new 1

I am having trouble seeing my usb printer from my second gen airport extreme using the newest version of airport utility under Mountain Lion. UGH! And while I can see and network to my Canon IP5000 from my macbook pro running leopard, I can't from my new macmini running Mountain Lion. Any help would be appreciated in configuring my macmini so it can see the Canon IP5000 on the airport extreme. Don't want to "share" the printer from the laptop because that would be a cludge. Thanks ahead

I solved this one based on another post. Turned out I needed the snow leopard IP5000 driver. I had just copied over the leopard driver (I had saved my .dmg file) and installed that but it didn't work. So I downloaded the latest driver which turned out to be for snow leopard and I am guessing since it is 64bit that is why it worked and the leopard driver didn't. Anyway, I also had to hook the printer up via usb to the mac mini to get it to work locally before the O/S would see it over Bonjour via the airport extreme.

Where do I find the MAC address on my new Airport Express?

Where do I find the MAC address on my new Airport Express? There's no label like there was on my Time Capsule (now dead). I need to supply it to my ISP in order to get hooked up. Thanks.

If you use AirPort Utility 5.6, you will find the MAC addresses under Manual Setup>AirPort>Summary.
There should be three MAC IDs: one for each of the wireless channels and one for Ethernet.

I can't find my printer or my external hard connected to my airport extreme on my mac or pc

Hello
My problem is i have connected my printer and external hard drive to my airport extreme that i just bought. Next i have installed all the nessesary software, created new newtwork, and now when i go to airport utility, then i click on my airport extreme, and under disks i see my external hard drive, but when i clcik on arrow next to it nothing appears. Also i cant find my external hard drive in explorer. With my printer i dont see it completly in airport utility.
Thank you for all help

Ok i connected HDD to airport extreme usb port( no hub). I went to airport utility and it recognises HDD under disks, and sharing is turned on. But the problem is i cant find it anywhere else on my computer, even when i search in explorer
I am assuming the the Mac is not having similar problems locating this HDD in the Finder ... correct? If it is only the PC, which version of Windows is it running?

How to lock a specific files on a shared network usb drive connected to an airport extreme on a mac running lion?

Is it possible to lock a specific files on a shared network usb drive connected to an airport extreme on a mac running lion?

Here is one from Pondini, who was the foremost Time Machine expert in the world.
http://pondini.org/TM/Airport.html
And another from Apple. Info near the bottom.
AirPort base stations: About USB disks
And another miscellaneous from Apple:
AirPort base stations: Time Machine hard drive compatibility

I'm trying to set up time machine to back up on an external HD connected t my airport extreme, but the disk doesn't show as an option in the time machine selecting a disk, any suggestion anyone? My mac "sees" the airport extreme ??

I'm trying to set up time machine to back up on an external HD connected t my airport extreme, but the disk doesn't show as an option in the time machine selecting a disk, any suggestion anyone? My mac "sees" the airport extreme ??

The first important thing to consider here is that Apple does not support Time Machine backups to a drive at the USB port on the AirPort Extreme, so that may likely have something to do with your difficulties.
If you want to continue to try this, the drive must be formatted in Mac OS Extended (Journaled) and you almost always have to use a powered USB hub with a drive at the port of the Extreme...even if the hard drive has its own power supply....because the port on the Extreme is under powered.
Most users who try this unsupported method have corruption difficulties sooner or later, but we do hear from some users who seem to be able to make it work.
The bottom line is that there is no support from Apple on this if you have difficulties, so you may want to consider a secondary backup plan for your important data.

I have a new HP Officejet 6500A plus. I cannot get it to connect to my Airport Extreme V5.6. It see the wifi signal but Fails on "Filtering" and possibly the channel. Does anyone know how to reset or reconfigure filtering

I have a new HP Officejet 6500A plus. I cannot get it to connect to my Airport Extreme V5.6. It see the wifi signal but Fails on "Filtering" and possibly the channel. Does anyone know how to reset or reconfigure filtering and channel on the old airports?

This is a part of the larger MacBook Pro connectivity issue. There are several related threads dealing with the MBP's networking problems. If your unit is suffering from this type of difficulty, good luck ... (or a long ethernet cable)
(PS Everybody please make noise on this one so apple comes up with a solution.)
< Edited by Host >

Need to see MAC addresses connected directly to AirpOrt Extreme

Similar Messages

Maybe you are looking for