Need to see the Stock!!

I have the requirement :
The stock transfer takes place between two plants under the same company codes. The requirement is that the Stock is expected back after some time.
Plant A gives 10 Pc to Plant B 10 Pc
Plant B must return these after some time. but till the time plant B returns the System should show the stock bifercated in the plant A that this is the expected incoming stock from plant B
Please give suggestion of how to map it in SAP

I have an option in SAP.
1)I will create the Stock Transfer Purchase order with "Returns" indicator.
2) Do Goods receipt against the PO in Plant A so that will reduce the stock in Plant A and give stock to PLant B
3) I will be able to track the stock reduced in my Plant specific to the plant B
4) The Stock calculation above will show the Material expected in Plant A from B
5) When Goods are again returned from the Plant B. I will enter the subsequent Delivery against the material Document created in the GR of the Retiurn PO. This will increase my stok again in Plant A
I hope this will work. I do not want to go for the developement as the requirement may not be for larger number of the transactions

Similar Messages

Want to see the stock of different variants with same configurable material

I have the stock for configurable material with different variants. Now I can see the cumulative stock
for that configurable material. But my requirement is that I want to see the stock for every variant
belonging to the configurable material.
How can I get it?

hello anant,
In my opinion for sure standard sap report cannot display the stock for a individual configuration.(Variant)
Reason:characteristics display/hide function is very dynamic dependeding on the dependency and interdependency.
The only option is by a report CL30N plus abap. Since we cannot keep anything in stock for a configurable material. You need to identify all open sales order and stock position OR through material movements and then find the produciton order and then read all char. values.
I assume you are not taking about variant materials.
Reg
Samson.

MB1B i need to check the stock overview & venodr stock

HI Experts,
i need to send the stock to subcontractor..so PO reference mb1b 541 movement type i m sending the stock..here i want to see the stock overview as well as see the vendor stock also.. if there is any setting or threre to check the stock otherwise any enhancement can fulfil this requirement.

Hi,
Enter movement type 541, PO referenc and on next screen, click on Environment tab, enter only plant, remove storage location , select Stock Overview -> Stock Material , system will show you stock in Plant for all Storage Location as well as Stock lying at Vendors end, else if tyou want to know stock lying at vendor's end , you can run report MBLB (Stock at subcontractor)
Regards,
Vikas

Would Like to Get Report of Daily Emails In and Out from Members to a DL Exchange version : 2007 I am the supervisor for the group and want to quantify this information. I do not need to see the content, just quantity is it possible ?

Would Like to Get Report of Daily Emails In and Out from Members to a DL
Exchange version : 2007
I am the supervisor for the group and want to quantify this information. I do not need to see the content, just quantity
is it possible ?

Well, distribution groups don't really have a concept of "in" or "out". They only serve to distribute messages sent to them -- unless you're asking to know who was a member of the distribution group at the time a message was sent to the DL.
Message tracking logs hold the information you want, though. You'd have to look for EXPAND events that reference the distribution group and take the sender's e-mail address from that event. If the DL is a simple one that's not a member of any other groups
you could also look for RECEIVE events sent to the e-mail address of the group and get the sender's name from that event.
You can use Powershell extract the rows of data from the logs, but you'll have to write the code to get the data out of those rows and into a format you want. Perhaps LogParser could be useful in place of Powershell?
--- Rich Matheisen MCSE&I, Exchange MVP

I can't see my facebook games on my mac. what app do i need to see the display and play my games?, i can't see my facebook games on my mac. what app do i need to see the display and play my games?

i can't see my facebook games on my mac. what app do i need to see the display and play my games?, i can't see my facebook games on my mac. what app do i need to see the display and play my games?

I don't play any Facbook games, but I'm assuming that they are played using your browser (Safari, Firefox, etc.).
Clinton

I always need to see the time counter on the music player, is that possible?

As a spinning instructor I need to see the time counter on the music player all the time. Now it dissepears after a short time and I need to touch it to see it again and that is not good! I also wish that it was bigger numbers on the counter so I easy can see how long time it's lest on the songs.
Ideas anyone?

By default the screen display will dim in about 20 seconds to conserve the battery. And I cannot find any setting to inhibit this function. I am afraid there is no way you can keep the screen bright and enlarge the numbers on the timer.

What is the T-code to see the stock at tank level?

What is the T-code to see the stock at tank level?
Regards
S.Senthil

Hi Senthil,
                In Order to Overview the stock at tank level do the following:
            1. Tcode-   O4_TIGER
            2. In the screen launched set the 'Transaction' Field as 'Stock Overview'.
            3. In the 'Pre selection' frame, enter the Storage Location and the Seq. No (Tank ID) details
            4. On execution you will get to see a Report. Refer to the 'Corr. Book Stock' column for the available stock.
            5. If there are more than one materials assigned to a tank. Click on the line item of the Report to see the break up materialvice.
P.S: To fine the seq No of the tank use tcode 'O4NA'.
Please let me know if this has helped you.
Regards,
S. Satish

Like MMBE in R/3, is there any t.code to see the stock overview in SCM?

Experts,
Like MMBE in R/3, is there any t.code to see the stock overview in SCM?
Thanks in advance
Krish

Please go to /SAPAPO/RRP3 and click on Stock tab. If you use GATP you can even get the details using /SAPAPO/AC03

WHER I SEE THE STOCK IN VARIENT CONFIGURATION

Hi
Gurus,
Where i see the stock of different varients available in plant .for example i want to the stock of yellow,red,black sheets with thichness and width from which this any t-code or tables.
Thanks in advance
avinash.pegarlawar

Hi,
It is not possible to maintain the stock for variant configuration materials. This is purely MTO scenario.
Regards,
V. Suresh

How can I see website data from itouch 4th generation? My 8 yr old may have been on inappropriate sites and I need to see the data from website data stored on the itouch.

How can I see website data from itouch 4th generation? My 8 yr old may have been on inappropriate sites and I need to see the data from website data stored on the itouch.

There is no way to see where he has been.
Go into Settings > General > Restrictions > Safari and turn it off. Then add the MacGruff browser from the app store. After that go back to Restrictions and turn off the ability to add apps.

HOW CAN I START DOWNLOADS AUTOMATICALLY? I DON'T NEED TOO SEE THE SAVE OR DISCARD BOX. THIS BUGS THE CRAP OUT OF ME. CAN I CHANGE THIS, OR ARE WE FORCED TO DO WHAT YOU THINK IS BEST? THANKS, KEITH D.

HOW CAN I START DOWNLOADS AUTOMATICALLY? I DON'T NEED TOO SEE THE SAVE OR DISCARD BOX. THIS BUGS THE CRAP OUT OF ME. CAN I CHANGE THIS, OR ARE WE FORCED TO DO WHAT YOU THINK IS BEST? THANKS, KEITH D.

Hey, Jeff...
I don't know how I could have made my question any more clear -- so let me try approaching it the other way around, and refer back to your answer(s).
You've been responding by saying that it's okay for me to remove the Creative Cloud versions of my software, but I don't have any Creative Cloud versions installed! I'm not talking about that at all, I'm talking about the software for Creative Cloud itself -- I don't use it, I don't need it, I don't want it, and all it does is nag me, telling me that there's updates for it (Creative Cloud). I have the full Adobe Creative Suite 6 Design Standard bought and paid for, I have no reason nor need to "rent" any later versions, I'm just talking about the Creative Cloud software itself that got installed on my system when I installed that suite of programs.
Like I said, I don't use Creative Cloud at all -- all it does is "nag" me, and eat up space on my hard drive. When I go in my Windows Control Panel and look at my list of installed programs, there it is -- "Adobe Creative Suite" -- and it's listed separately from "Adobe Creative Suite 6 Design Standard" (of which I've only installed Photoshop, Acrobat and InDesign, basically, as those are the only programs I use at all at the moment). Can I just uninstall "Adobe Creative Suite" without it affecting "Adobe Creative Suite 6 Design Standard", i.e. my Photoshop, etc. will still work just fine, and I can still get updates and stuff? And by "updates" I don't mean get later versions of Photoshop, etc., I just mean any possible updates to the software that I do already have (that comes with Adobe Creative Suite 6 Design Standard).
I hope that makes my question a little more clear?

Need to display the Stock Values at storage location level - 0IC_C03

Hi All,
I am developing Stock Movent Report on 0IC_C03 - Material Stocks/Movements.
I have more than one storage location for plant. Stock quantities are calculating at storage location level and Stock Values are calculating at plant level.
I have no issues with quantities. Only problem with Values.
2LIS_03_UM is not picking the starage location, so that the revaualtion values are falling under unassigned nodes. When i set filter on storage location these values were not showing as they are under un assigned nodes (#).
I want to get the Stock Quantity and Stock Values at Storage location level in my report.
I found that soulution for that is Applying SAP Note : How to Realize summarized display of stock values on storage
I have done development as per the document. But when i run the Query it is going to debug mode first and then it saying This program cannot display the webpage
Can any one faced the same situation, Please help me if so.
Thanks in Advance.
Gopal N

Hi Sachein,
I am getting this An exception(CX_RSR_PROPAGATE_X) occured when debugging, and then it leads to next screen saying that:
This program cannot display the webpage
   Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
   What you can try:
     Check your Internet connection. Try visiting another website to make sure you are connected.
     Retype the address.
     Go back to the previous page.
     More information
Please let me know you need any more information.
Thanks in Advance
Gopal N

I would like to see the stock level of the material through T code

hi
I would like to see the material stock by plant storage location
the required details are Unrestricted avilable stock , Order stock , delivery stock , blocked stock , quality stock
what is the T code to view all those things
Dinesh

Hi
use T code <b>MB52</b> to view stock in detail
Vishal...

Idoc data - Need to see the full SDATA field value

My SAP system is 4.6C. I need to see and extract the field data of the SDATA field in the EDID4 table. The field size in se11 is showing as of 1000 characters, but the field data when displaying is getting truncated. The message that comes below is Field SDATA is too wide to display (field will be truncated) --> Message no. MO 441 --> The field SDATA is more than 200 characters long. --> the system response comes as The field is output in a format restricted to 200 characters. So, it seems that the data after 200th character is getting truncated.
How can i increase the display field of the SDATA field???

It is not possible to view the IDoc data directly in the database. You need to use either WE05 transaction for an existing IDoc or WE60 to view the documentation and layout for each type.
In a nutshell, there are different segments, each with their own layout, but it's not efficient to create database tables with separate fields for each segment. So all the data is stored in "raw" format and then, knowing the segment code, it may be correctly parsed into a readable format.

Need to see the Time code when playing

I need to send, on a DVD, a project I'm working on to someone so he can see the time code as the movie is playing. Anyone have any ideas as to what I can do, either imovie 11, or outside of it?

Top right corner, press the tiny album cover art.

Need to see the Stock!!

Similar Messages

Maybe you are looking for