Need to Send Emil for the Notification in Workflow Bilder.

Hi.
We are using the Credit memo workflow(ARCMREQ) for iReceivables. In that for the approval process its notified to the user. While notifying the user also needs a email to their mail id. Kindl let me know how to do it in workflow builder.
Regards,
Suresh P

Hi,
Please follow the below mentioned steps to accomplish the above task.
1. Create a mailing list.
2. Add the required mail id's to this mailing list.
3. Now attach this mailing list to the WF. notification.
Once the mail is sent to this mailing list then it reached all the intended recipients.
Regards,
Yuvaraj.C

Similar Messages

Need best Architecture design for the following scenario

Hi Experts,
I need best architecture design for the following scenario:
Sender: Mail
Receiver: if sender body contain u201DApproveu201D, then call SOAP adapter, If SOAP adapter execute successfully, then send Mail(SOAP adapter executed successfully) and SMS . So receiver is SOAP, Mail and SMS.
My current approach issue:
Three message mapping:
Mapping1: mail to SOAP
Mapping2: mail to Mail
Mapping3: mail to SMS
In interface determinant>u201DSelect all three operation mappingu201D> u201Cselect order at runtimeu201D.
Issue in current approach: For me first SOAP adapter should complete successfully, after that only my Mail and SMS operation mapping should execute:
But problem is before success of SOAP adapter engine, Mail and SMS mapping completed or integration engine executed.
Note: There is possible to fail the SOAP request in adapter engine.
Kindly help me --> u201CAm I going correct way or want to change the architectureu201D?
Thanks for advance!!
Regards, Kumar

What do you mean by successful execution of soap call? Are you talking about Successful response (happy flow) from the soap call instead of application error ? Then based on the response you want to decide sending mail and sms. How big call is your soap ? If your soap interface is very simple I can give the other possible way.
Sender sends the message, use mapping to read the content and then do soap call in the mapping itself and after seeing the soap response decide about two receivers (mail and SMS). If your soap call is very simple one, you can go for it. Otherwise I would not recommend this. The reason is you loose some visibility regards to monitoring during soap call in the mapping.
Other option is go for CCBPM. Here you receive the message, use send step to soap interface which is sync step. Then after seeing the response create another block with fork steps each for two senders mail and sms. If response bad then dont proceed or execute the next block. Simply use exeception or control step to jump out from the block,

Addition of extra subscreen for the notification

Hi All,
I have requirement in which I need to add an extra sub screen in the notification creation tab for certain notification types. There are 5 subscreens being displayed for the Notification header tab.
When I checked in SPRO for the screen settings for Notification creation the limit for subscreens is 5. As per my requirement I need to add one more subscreen to this.
Let me know how can I do this.
SPRO path used is - SPRO --> IMG --> Plant Maintainance and customer service --> Maintenance and service processing -> Maintainance and Service notifications --> Notification creation --> notification types --> Set screens for notification type.
Here give any notification. click on the notification 1 tab - 10\TAB01. In the screen area you can see there is space for 5 screens only. I need to add one more in this. let me know how can i do that.
regards,
Shahu

Seems that we cannot include more than 5 sub screens in the iw22 notification data screen. Using the Custome data tab provided to enhance further.

I am new to the ethernet communication using labview. I do not have any hardware. I have two laptop i need to send and recieve the data via these 2 laptop using labview. Kindly help me on this.

i am new to the ethernet communication using labview. I do not have any hardware. I have two laptop i need to send and recieve the data via these 2 laptop using labview. Kindly help me on this.
Solved!
Go to Solution.

Hi thanks for the help.
Actually i am trying to send 10 sine signals from server pc to client pc. So i will bundle 10 signals in server pc and send it and in client pc i am unbundling it and need to save in TDMS format.
Till unbundling i was able to do. TDMS format it is saving only last value. I need to save all the values. Kindly help me on same. I am attaching both the VI.
Attachments:
Client.vi ‏62 KB
Server.vi ‏252 KB

Itunes has encountered a problem and needs to close, sorry for the inconvience., itunes has encountered a problem and needs to close, sorry for the inconvience.

iTunes always quit with the error message "
itunes has encountered a problem and needs to close, sorry for the inconvience. " Uninstalled and re-installed many times, but the issue still persists.

Generate another of those error messages and click the "Click here" link in the error message box. What modname and modver are showing for the error? (Precise spelling please.)
If the error is a BEX and thus doesn't show an modname or modver, let us know what P1 through P9 items are showing for you instead.

HT4623 I have an ipad3, iPhone3gs and iPhone5, my problem is my apple ID works all 3 devices but I need a second ID for the iPhone 5. How do I delete my ID and set up a new one for the iPhone5 but keeping my own apple ID for the iPad and iPhone 3GS

I have an ipad3, iPhone3gs and iPhone5, my problem is my apple ID works all 3 devices but I need a second ID for the iPhone 5. How do I delete my ID and set up a new one for the iPhone5 but keeping my own apple ID for the iPad and iPhone 3GS.

http://support.apple.com/kb/he37

I have 2 point security for AppleID. My iPhone 4S is listed as my trusted phone to text. No tel. no. is given. I am updating to iPhone 6Plus with same tel. no. Do I need to change anything for the sign in verification?

I have 2 point security for AppleID. My iPhone 4S is listed as my trusted phone to text. No tel. no. is given. I am updating to iPhone 6Plus with same tel. no. Do I need to change anything for the sign in verification?

Of course You can also add your iPhone telephone # as a trusted device.
This way when you insert your SIM card into any phone, Apple will automatically recognize your cell phone # as a
trusted device (may be handy if iphone breaks but you insert SIM card into another phone).
HOWEVER:
Having also your iPhone as a trusted device, is convenient if you travel and use a different SIM card
at destination. This way you can still use the iphone for verification, even though you are using a different
phone #.
Regards

Getting error log 'Customer' needs to be defined for the PA segment'

Hi guru,
i am posting automatic payment transaction (F110) ,but i am getting in display log that
I am unable to do the posting?
can somebody let me know any reason for this?
04/09/2010 12:57:54 Job started                                                                        00           516          S
04/09/2010 12:57:54 Step 001 started (program SAPF110S, variant &0000000089657, user ID X1SRAVKU)      00           550          S
04/09/2010 12:57:54 Log for payment run for payment on 01/22/2010, identification EIN5                 FZ           401          S
04/09/2010 12:57:54 'Customer' needs to be defined for the PA segment                                       ZF           019          S
04/09/2010 12:57:54 Information re. customer 1002215 / paying company code WG ...                     FZ           306          S
04/09/2010 12:57:54 ... payment not possible because of reported error                                 FZ           311          S
04/09/2010 12:57:54 End of log                                                                         FZ           398          S
04/09/2010 12:57:55 Job finished                                                                       00           517          S

We have user defined PA characteristics. If there is new characteristic we update the custom lists through KES1.
Lack of a match in this table, leads either to no description or the error you are describing.
good luck

I have just recorded on garageband and now need to send away for editing how do i place in file and send

I have just recorded on garageband and now need to send away for editing how do i place in file and send

Send where? Edit how?

I installed acrobat pro on my computer, and now I am unable to download items because I get a message that I need to open acrobat for the user agreement. opening acrobat pro does not help.

I installed acrobat pro on my computer, and now I am unable to download items because I get a message that I need to open acrobat for the user agreement. opening acrobat pro does not help. What do i do?

I have not contacted Adobe. I am using acrobat pro CC, and haven't noticed any problem with the software itself. The only problem I have had so far is when I try to download.

I'm trying to download what's app chatting application and the massage given (need your secret answers for the below questions to proceed your purchase request ) but the problem is I forgot my answers :((( how can I reset the questions and the answer ????

I'm trying to download what's app chatting application and the massage given (need your secret answers for the below questions to proceed your purchase request ) but the problem is I forgot my answers :((( how can I reset the questions and the answer ????

Visit this site: http://support.apple.com/kb/HT5312

NotifyOSD look-alike theme engine for the notification daemon

I've started to work on a theme engine named "coco" for the notification daemon, and I'm sharing what I have so far in case someone finds it useful. My goal is to make it look like NotifyOSD (https://wiki.ubuntu.com/NotifyOSD). I'm taking the notification-daemon-engine-nodoka source code as a starting point, so you can follow the same steps that are on the AUR to install it.
Here is a screenshot of what I have so far:
And here is the git repository with all the source code:
http://github.com/tatofoo/notification- … ngine-coco
Keep in mind that I've disabled all kind of buttons for now, and the icon that appears on the screenshot is from NotifyOSD (https://launchpad.net/ubuntu/+source/no … -icons/0.3).

Hey, thanks for adding it to the AUR.
I don't have my computer here right now, so I can't really test it, but do you have composition enabled? Also, which version of notification-daemon do you have?
I haven't really cleaned the nodoka code that coco doesn't use, maybe when I do that the bug goes away, I'll try to do that before the weekend and I'll let you know so you can try again.

We need IOS 4.0 for the ipod touch 1st generation not everybody have money to get a new version of ipod touch to used the most important social networks ... please think about it and i would grateful if i can use my old ipod touch .. Thanks :)

We need IOS 4.0 for the ipod touch 1st generation not everybody have money to get a new version of ipod touch to used the most important social networks ... please think about it and i would grateful if i can use my old ipod touch .. Thanks

Sorry, the fellow users in the forum hae no way of making that happen. The maximum iOS for a 1st generation unit is 3.1.3
Stedman.

I am trying to use an external HD and need to configure it for the MAC. Can someone explain how to configure the HD (Western Digital - My Passport SE)?

Can someone help explain how to add an external HD to the Mac? I have a Western Digital My Passport SE and need to configure if for the MAC and add it to the HD location on my Mac.

Connect the external drive to the Mac. You can do that while the Mac is on, (If the drive is one that has to be plugged into a wall outlet do that too and turn the power on.) If there is a light on the drive it should turn on.
Now double click on the hard drive icon - top left of the screen of your computer. When it opens look for the Applications folder. Double click that. Next look for a folder called Utilities. Double click. In there you will see a file called Disk Utility.app. Double click on that.
You will now see something like this, with two items on the left. The second one is your new drive.
Select it - one click. And click on Erase - one of the buttons at the top, You will see this.
You must select the Format, it's a drop down - the one shown in the image above is best. You can change the name from Untitled if you want. The name can be changed later if you prefer.
At this point look at the bottom right. There is a button there called Erase. Click on it. Then go get yourself a cup of coffee - this will take a few minutes.

Premiere pro needs a lens correction for the GoPro cameras

Premiere Pro needs a lens correction for the GoPro cameras

Please add your request here:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Best,
Peter Garaway
Adobe
Premiere Pro

Need to Send Emil for the Notification in Workflow Bilder.

Similar Messages

Maybe you are looking for