Need to show video and photograph side by side

I have a section of video where a presenter is very animated stretching his face describing a funny candid photograph he did not have.  I have both the video and photograph.  I want to show both at the same time because the presenter is so animated.  Is it possible to show the photograph next to him with Final Cut?  I was thinking of something that looks similar to the keynote title.  The photograph on the left and the video of the presenter on the right.

It is easy enough.
You can put the photo over the video in the timeline.
Then shrink both with the Transform tool and move them so they are side by side.
It may look better if you leave the video full size and shrink the photo so it appears as Picture In Picture to the side of the presenter.

Similar Messages

  • I need to mask video, and maintain the alpha channel for the masked video!

    I wanted to know how to mask video in Final Cut Pro 6, I am sure there are options to do so, can someone please help me with getting started. I want to be able to mask video and maintain an alpha channel.
    Thanks in advance,
    Sebastian

    Did you get anything to show up on the tv?  If you got a aura wallpaper then it's working.
    If you did then it's in extended desktop mode or a logical extension of the desktop to the right.  Drage the player off the right side of the screen to the right and it will appear on the TV.
    All the options are in System Preferences > Displays > Arrangement tab.

  • What accessories do I need to watch videos and movies on my Samsung flat screen TV from my iPad model MD511 C/A?

    I want to play videos and movies from the Apps on my iPad with iOS 6.1.2 on my Samsung HD TV, what cables etc. do I need?

    Depends on what input options you have on your TV.
    If your TV has DVI in then you need a MiniDisplay Port to DVI Adapter.
    If your TV does not have DVI in but has HDMI then you need a MiniDisplay Port to HDMI Adapter with Audio Support.

  • What do I need to transfer video and audio from my 2009 Macbook to my television?

    I want to watch a movie with my family tonight, but the DVD is broken. I was planning on renting the movie online and transferring the video and audio from my Macbook to the television. What cables will I need to accomplish this? Also, does anyone know, were I to use a Windows instead, would transferring the audio be simpler? (And what would I need to do that?)

    Try doing it without a cable!
    Use AirDrop, described here:
    http://support.apple.com/kb/HT4783
    UPDATE - Oh, sorry, I see the article points out the MacBook is too old for AirDrop.
    Message was edited by: sberman

  • Dimension in WebI query filter needs to show Key and Description

    Hi,
    We have two requirements that we can't get them done:
    1. We are building webi report based on Bex universes and we need to show the key and description of an object in the query filter of the report. Does this have to be set in the Bex variable or in the universe?
    2. filter the LOV related to a specific dimension that is used in the query filter as prompt. The idea is to show a filtered list in the promp LOV of the dimension used in the query filter of the report. Does this have to be set in the Bex query or in the universe? If it is in the Bex Query, where exactly?
    Our system is the following:
    - BOE XI 3.1 SP2
    - SAP NW 4.0
    I await your answers. Thanks in advance.
    xtian

    Hi
    1. We are building webi report based on Bex universes and we need to show the key and description of an object in the query filter of the report. Does this have to be set in the Bex variable or in the universe?
    >> you can easily achieve that by creating a variable in the BEX query - that will return as a LoV with key and description assuming you have key and description in BW for the InfoObject.
    2. filter the LOV related to a specific dimension that is used in the query filter as prompt. The idea is to show a filtered list in the promp LOV of the dimension used in the query filter of the report. Does this have to be set in the Bex query or in the universe? If it is in the Bex Query, where exactly?
    >> so like filter Country = US in the filter and then prompt only for customers in the US ? if so that is not possible right now.
    Ingo

  • Need to convert video and audio files in high quality

    Hi to all, i need to convert file types such as .AVI, .WMV and .MOV and keep the high quality, but i dont have or know any software to do this, are there any good options out there?
    I don't really want to use a trial version, thanks.

    I've used FFMpegX for my conversions. I've never looked at them on a large screen to see how well the video quality held on, but they look fine on my MacBook.
    http://www.ffmpegx.com/
    ~Lyssa

  • Report Needed to show WBS and Profit Center on Invoices

    I need a report of open and cleared invoices that show the WBS and Profit Center.
    I have tried the FBL5N and it doesn't populate it. Any other reports out there???

    You dont have to join them. Keep both profit center and cost centre in the cube. While defining the update rules, derive profit center from cot centre.
    In the report , keep profit center and cost centre as free char.
    The users can dynamically drill down and view the report for cost centre or profit centre or both.
    Another idea is to keep profit centre as a nav attribute in the cube and in that case, you dont have to derive profit centre from cost centre in the update rules.
    Ravi Thotahdri

  • IPhoto shows original and modified side by side

    Hi.
    I can't find the solution or similar cases on the web so I went to you.
    On iPhoto (iLife 11), if I edit one photo and then I go back to the event where it belongs, I see both the original and the edited version of my photo. They have both the same name. (Of course they are stocked in different places by iPhoto on the HD).
    It's much more annoying than usefull. Each time I modify a photo it gets duplicated. Please note that my photos are well imported in iPhoto's library.
    I have crawled through the preferences and the menus, I can't find where it could be an option to show/hide originals.
    Any idea why iPhoto behaves like this ?
    Thank you very much.

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    how are you editing the photo.  With iPhoto or an exterernal image editor?
    Happy Holidays

  • Present video and powerpoint side-by-side

    I am searching for an easy way to merge a powerpoint presentation and a video clip (of presenter) side-by-side and produce it into one Flash video for streaming on our website. Can it be done in Flash CS4? Or, is there another Adobe program that can do this for me? Or, do I have to look for another vendor to acomplish this, what I thought would be an easy task?

    kglad,
    thanks for your reply. Sounds like this may work, but being a Flash novice, would you be able to direct me to some "how to" documents and/or online video of how I can do this, especially the "load it and your flv into a master swf"?

  • Adobe needs users for video and button workflow studies - get an Amazon gift card

    Adobe is looking for participants for a brief (~1 hour) online work observation and interview. Compensation will be a $100 Amazon gift card.
    The studies involve users who are in the beginning/novice stages of learning Flash Professional, or more experienced users who have not yet done the workflows being studied.
    There are two sets of criteria, each applying to a different study. Please read the criteria carefully before responding. Also, it is important to indicate in the subject line of your response which one of the two studies you meet the criteria for and wish to participate in.
    There will be 2 studies of Flash workflows. One is about deploying video content in Flash. The other is about creating a button to perform some control of the Timeline. The studies will be conducted over the telephone and Adobe Connect (software for screen sharing).
    For the video study, participants must meet the following criteria:
    - some experience with Flash CS4
    - some experience viewing video on the Web
    - no experience using video in Flash
    - have any version of Creative Suite 4 or Flash Professional CS4 installed (with most recent updates) on a computer that can be connected to the Internet
    - ability and willingness to install and use Acrobat Connect on the same computer as the above software
    - a 90-minute block of free time between 10:00 and 16:00 Pacific Time (GMT-8) on a weekday during the first two weeks of August (3August-14August).
    If you meet these requirements and would like to participate in this study, please contact me at jarmstrong [at] adobe [dot] com, with the subject line "Flash video study".
    For the button study, participants must meet the following criteria:
    - some experience with Flash CS4
    - no experience creating buttons in Flash
    - have any version of Creative Suite 4 or Flash Professional CS4 installed (with most recent updates) on a computer that can be connected to the Internet
    - ability and willingness to install and use Acrobat Connect on the same computer as the above software
    - a 90-minute block of free time between 10:00 and 16:00 Pacific Time (GMT-8) on a weekday during the first two weeks of August (3August-14August).
    If you meet these requirements and would like to participate in this study, please contact me at jarmstrong [at] adobe [dot] com, with the subject line "Flash button study".
    Participants in these studies will be thanked profusely in addition to receiving the Amazon gift card.

    @Karl, Thanks. If you are interested in participating, please send me an email as instructed in the original post. - Jay

  • Need help showing singles and albums after searching for them In I Tunes 11 Win 7

    Just got I tunes 11 iusing Win 7 and when I add songs and search for them in the upper right hand corner the album or the song appears. NowI need to view the single so I can add info. But I cannot figure out where to click to jump to that single shown in the main display or the album shown in the main display window. Can somebody please help me? What to you click on? Thanks in advance. Also where are your playlists?

    I wanted to bring closure to this unanswered thread. I came to realize that I put way too much into that post (information overload) and couldn't possibly expect for anyone to take on such a compilation of driver issues all at once. I later put each issue into separate threads and then got the help I needed. I learned how to find out what the Hardware ID was for each one and got the appropriate software driver to match.
    Kudos go to Jerry_Lippey who helped me out in so many ways plus gave me the link to a page where I learned how do do this myself.
    That can be seen here: How to identify an unknown device (e.g. Wireless LAN module)?
    And, you can look up Hardware ID's here: PCI Vendor and Device Lists
    I hope this helps someone in the future who is the same boat that I was once in.

  • Video and status icons not appearing

    I'm trying to set up a chat between my sister in Canada and my parents in the Uk. My sister's using a macbookpro with OSX0.4.1 and ichat 3.18 and my parents are using an imac running 10.3.9 and ichat 2.1
    We got into a video chat with my parents the other day, but today although all is good here, my parents can only see themselves in the video - they fill the screen. I don't know how to get them so they see themselves in the smaller preview, and us in the large preview. Also, they don't see the status icons, nor any of the green camera icons next to my name or my sister's name in the buddy list (and apparanty never have). They've tried quitting ichat, unplugging and replugging in the external isight, and rebooting with no difference.
    Can anyone help?

    Hi Kevin,
    iChat sometimes does this.
    The easiest fix is to reconnect.
    Or restart iChat.
    Now in addition they should really check some other places.
    With iChat open go to the Video menu.
    This should have the Camera Enabled item ticked.
    In the View menu they should make it Show Video and Show Audio Status.
    This will produce the Green icons in their Buddy list if they are not already there.
    There are in fact loads of ways to start a Video chat
    1) Clicking on the Green icon for that Buddy.
    2) Clicking once on the Buddy and then icons at the bottom of the Buddy list
    3) From the Buddies Menu
    4) Right Clicking /Control Clicking a Buddy and then from the Contextual menu
    I can understand that they may have the green icons but not use them.
    If the above does not work they should try Repairing Permissions
    As they are in iChat 2 and Panther then they may need to Run the Cron Scripts.
    See this FAQ for both the previous.
    For the second bit they will need MacJanitor (Simplest and cheapest and only does the Cron script)
    Download and install
    Click the Padlock and type in Admin password
    Run the Scripts one at a time or all All Tasks
    10:55 PM Thursday; July 12, 2007

  • Sync Cannon 5D video and external audio

    Hi,
    I'm recording video on a Cannon 5D Mark II Camera and audio separately at 30 fps.
    What sort of worlflow should I use from production to editing - to make sure the sound will sync correctly?
    Is there a particular frame rate the video should be shot at?
    If it is shot at 23.98 fps, how can I sync the 30fps audio in Final Cut in the end?
    Thanks in advance for the help!
    Fernanda.

    Maria Fernanda Affonseca wrote:
    My situation is this: the director wants to shoot both 5D and 16mm footage and eventually edit them together, but she doesn't know how she wants to finish it - whether in film or video - yet.
    She needs to record video and audio separately because this is a choir singing in a studio.  They need to record the sound in a studio for quality.  But the video shood take place outside.  There is no way to record the choir singing on location.
    Excellent. Preplanning is what good production is based upon.
    Shooting double system sound is not new, we've been doing it for, like, a century. It's all been invented, it's all been done, the entire workflow has long been perfected. Long ago. In every first time dual system shooting situation, the director thinks he/she knows more than the collected 100 years of experience of millions of sound people and the project descends into preventable chaos.
    You are going to be shooting a common situation, lip-syncing to playback. "Playback" is one of the terms applied to the use of prerecorded sound or music providing the foundation or motivation during staged photography. The director rolls film, slates the take, calls for playback, and then says, "Action."
    The technique is easily researched in any good library, look for film production handbooks.
    Here's what you need (one version of a list, other wonks, of course, will offer a different list):
    1. Studio recorded music tracks with SMPTE timecode track (look it up)
    2. Playback equipment and sound delivery amplification/speakers for shooting on location that includes the ability to play the timecode track and feed it to a couple of devices
    3. A timecode slate that receives timecode from the sound track playback
    4. A timecode reader that will send the same timecode to all cameras
    5. Timecode receivers that will record timecode to the camera's timecode track
    (Timecode can either be provided by a playback device or by a master generator. There are reasons why you choose one over the other. You might record a master t/c on the timecode track and feed the playback t/c to an aux input or u-bits or use the playback t/c to jam the master t/c generator.)
    That's one of the ways the big boys do this. There are many others. The fundamental idea is that everything sees the same timecode and so cannot possibly get out of sync. It's not complicated but it's not trivial. It's a simple engineering project and the equipment is all off the shelf and standardized. Your director, of course, is going to say "We cannot afford to do this the correct way and I do not believe anyone who says it is actually more expensive to attempt to fix audio sync in post instead of doing it properly in the filed, so, how can we hack this for free?"
    And you will be back after your shoot to ask us how you can get this fixed.
    Shooting 16mm is fun and an excellent stylization decision but it carries additional planning ad post production considerations. If you or your director have never shot fil, you should hire an experienced photographer because you don't get second chances with film and the ability to repair film in post with digital effects is not only limited, it's an expensive waste of time if the film could have been exposed properl. Deliberate post production film grading ad effects are not included in that statement because they require extensive preplanning and knowledge that, looks to me, your production staff and crew do not yet possess.
    You need to know the differences between the sensor sizes of 16m cameras and DSLRs produce wildly different depth of field tables for any given focal length and focus distance. The idea that you can intercut the two media must not be based on the misperception the formats have similar looks. They are wildly different in every way.
    yadayadayada
    bogiesan

  • Percentage and Count side by side

    Hi,
    I have a crosstab which shows data broken out over 10 years, is there a way to show count and percentage side by side meaning
    year1 year1 year2 year2
    count percentage count percentage
    Item
    Is there a way to do that.
    Also is there a way to have in percentage when I drill down the percentage sum up to 100 for that drill down for example
    2006 2007 2008
    item1 -> Gender-> Female 50% 50% 50%
    Item1 -> Gender-> Male 50% 50% 50%
    I know you can select calculate based on change in item but if I do that it works at one level but if I drill down further it will not work
    Any suggestions
    Thanks
    Nimesh

    Hi,
    You should be able to do this by adding the count as the data item in the crostab and then creating a percentage for the crosstab using 'a grand total for each column' option.
    The percentage and the count will then based on what has been included in the crosstab.
    Rod West

  • How to show underline and overline for subtotal and total row in Cross tab

    Hi,
    I am developing cross tab report where i need to show undeline and overline in data for subtotal row and total row so as to distuingish normal rows from subtotal and total row.
    Thanks,
    Mahesh

    Hi BIPuser,
    i looked at the updated template, we need undeline on the data corresponding to subtotal row for ex. row 2.
    We have xml tag in xml data UNDERLINE_AFTER='Y' and UNDERLINE_BEFORE='Y' then we need to show underline and overline on data i.e on 121,122,123,221,222,223 ,not on ROW2.
    value1 value2
    row1 200 300
    row2 400 700
    we need underline and oveline on data 400 and 700 since it is subtotal data based on condition UNDERLINE_AFTER='Y' and UNDERLINE_BEFORE='Y'.
    Hope you understand.
    Please help!!!!!!
    Thanks,
    Mahesh
    Edited by: user13450806 on Feb 2, 2011 12:14 AM

Maybe you are looking for