Need to sign Lenovo in order to install our Remote Control app for our Customer - Help please!

Dear All,
Thank you for joining me into the Lenovo Community.
I am not certain if I have started the thread in the right place, if I have not, admins please help me transfer this thread where needed.
One of our Customers is going to purchase our Remote Control application, in order to access and remote control their Android Smartphones, from their Windows PCs (Windows Computers to access and remote control their Android phones). The Customer is using Lenovo as their smartphones (about 2000 of them).
However, our application needs to be signed by Lenovo in order to fully install and run on a Lenovo Android smartphone.
I do not have access to the Support department, nor to the Development department of Lenovo in China.
Is there a way that you would recommend I take, either by contacting Development directly, or Support, and where would that be? China or US?
Thank you in advance and I hope to hear from you soon.
kind regards,
Michael Chatzilias

Use the "auto search" feature of the remote to see get the code.
In the manual, it's under "WHAT IF NONE OF THE CODES WORKED"
Here's a summary:
program the TV, use code 922
Press Play
then Press Fast forward.
Keep pressing fast forward until your tv turns off (go slow, if you go to fast you can use rewind to go back a code).
when it turns off, the remote found the code, press OK to save it.

Similar Messages

I changed my apple id email because I needed a more recent email and forgot my old password, now I need to sign out of my old Apple Id and don't know how. Help???

I changed my apple Id email because I needed a more recent email and forgot my old password, now I need to sign out of my old Apple Id and don't know how. Help???

Make sure you are signed into iMessage and FaceTime with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID). Then go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).

Lenovo AIO C440 - not working infrared remote control

Hello,
is there any hint how to get infrared remote control working for a new C440 model? Tomorrow I will try to measure and/or replace batteries which could be bad. For now it is totally not working.
Another question: the remote should work only within AverMedia TV app or in the whole Windows 8?
Regards,
Zdenek

hi bohdik,
Welcome to the Lenovo Forums.
The IR Windows Media Center remote control is for use with C440 models with optional TV tuner. If you have this model, make sure the TV Tuner driver and the ITE CIR Driver from the lenovo support site are installed under Device Manager (press Windows Key+R then type devmgmt.msc) then follow the Set up a TV signal in Windows Media Center. guide.
Note:
You must have Windows 8 PRO to enable Windows Media Center
See this articles in reference:
How to add Windows Media Center to Windows 8 Pro
How To Install And Set Up Media Center On Windows 8
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Hello everyone! i have a new macbook pro and i want to download aperture. my app store says it is already installed (on my old macbook pro). how do i install aperture from the app store in this instance please?

hello everyone! i have a new macbook pro and i want to download aperture. my app store says it is already installed (on my old macbook pro). how do i install aperture from the app store in this instance please?

Are yoy sure that Apeture is not in the Applications folder of the new system? If it is move it to the trash and the App Store will let you download Aperture from it.
You will need to make sure you use the same Apple ID you used to purchase it in the past.
regards

Do we need a battery app for our iPhone?

Do we really need a battery app for our iPhone? (search "battery" from the iOS App Store)
Phishing / Scam
I am more and more in doubt about it. Even worse, I recently found an app with a new link (with a rocket icon on the upper right corner if you select Memory Boost) that redirect you to a website asking you to give permission (to surrender your security) for them to install a Profile to your iPhone. (Just like your iPhone is a property of their company so they have overall control of your iPhone). I really suspicious if the battery app is actually a mobile scam / phishing app in nature.
A fallacy of usefulness, and even dangerous
Back to the function of a battery app. It provides a seem-to-be smart charging method to your iPhone: 1) high speed charge to 80%, 2) continue to charge till full but slowly, then 3) trickle-charge to make use of every charging capacity of your iPhone battery used. I believe iPhone has provided high speed charge and slow charge already. So the battery app is actually doing nothing. Regarding trickle charging, I think it's dangerous. It may over-charge your iPhone battery if you leave it over-night charging. But without using a battery app, your iPhone will not do trickle charge and will not over-charge the battery.
Any expert advice?

The iPhone charging system is already smart enough to do what the so called App is pretending to do.

Hi, I have been using CS5 for a while now, but had to wipe my computer clean last night and now am unable to re-install my adobe on the same computer. Help please.

Hi, I have been using CS5 for a while now, but had to wipe my computer clean last night and now am unable to re-install my adobe on the same computer. Help please.

Can you describe more about what you summarize as "unable to re-install my adobe on the same computer." ? What actions do you take and what results? What messages do you get? Are you able to install it on a different computer?
Since you use the word "same", it might be a case that you do have another machine that the install is functional on. If so, or even if you installed a couple of times on the same machine, it might be a case where your activation allowance has been used up and you need to have them reset. If you contact Adobe Support thru chat you can ask them to reset your activations so that you have the two allotted to you available again.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Problem with Office 2007 whenever I install the iCloud Control Panel for Windows

Sadly I have a Win7 laptop as my work hack and am using Office 2007. Outside of work I use iCloud to sync calenders between various iOS/OS X devices however whenever I install the iCloud Control Panel for Windows Plugin my email no longer loads. Outlook starts fine and just sits there with an empty inbox waiting for mail to load. I can't even open the iCloud Panel from within Control Panel either to set preferences!
Unistalling the iCloud plug-in resolves this but I really want to sync my iCloud calender with Outlook and can't see any other way to do it, plus it worked before and then just stopped.
Any assistance would be appreciated.

I tired everything that was suggested in the forum. Tried IE and firefox to no avail. When I tried computers in stores both worked. A friend of mine who has the 32 bit setup got it to work. Several folks have stated it is the compatability issue with 64 bit. As a last resort, I loaded safari on my home computer, and yep, it works. Go figure, apple product.

2 errors: "Your iPhone could not be activated because the activation server is temporarily unavailable" and the sim says "searching" while iTunes says there is "No Sim installed" - but of course, there is! Any help please??

2 errors: "Your iPhone could not be activated because the activation server is temporarily unavailable" and the sim says "searching" while iTunes says there is "No Sim installed" - but of course, there is! Any help please??

Hi Peter,
Thank you for the note - I have seen similar replies on other posting errors and I see how that could make sense. The thing is, my iPhone is not jailbroken - it is from an authorized distributor. However, when I told them about the "no service" problem on the sim, they were unable to assist. Then my phone messaged that an itunes restore was required - so I did that, several times, to the error message now noted on my post. I wonder if there is some other way to over-write this message? Thanks very much.

Is this a real Apple email? Dear Customer, We're constantly working to make our clients safer and our services more convenient for our customers. Your account has been frozen temporarily in order to protect it. The account will continue to be frozen

Is this a real Apple email?
Dear Customer,
We're constantly working to make our clients safer and our services more convenient for our customers. Your account has been frozen temporarily in order to protect it.
The account will continue to be frozen until it is approved And Validated . Once you have updated your account records, your information will be confirmed and your account will start to work as normal once again.
Confirm Now >
Wondering why you got this email? It's sent when someone adds or changes a contact email address in your account. If you didn't do this, don't worry. Your email address cannot be used as a contact address in your ID without your verification.
Sincerely,
Customer Support

Dennis,
Definitely a phishing email. "Confirm Now" is linked to:
Read Identifying fraudulent "phishing" email - Apple Support. It will help you identify and report fraudulent email.

I cannot install ODX Yosemite over OSX Mavericks as my Mac Book Pro (early 2011) advises that the disc "Mackintosh HD" is used for Time Machine back ups. This is not the case however as I use a separate external HD for this purpose, help please ?! T

I cannot install ODX Yosemite over OSX Mavericks as my Mac Book Pro (early 2011) advises that the disc "Mackintosh HD" is used for Time Machine back ups. This is not the case however as I use a separate external HD for this purpose, help please ?!
Thanks

Check this link out...
OS X: Cannot install on a volume used by Time Machine for backups
I was apart of this thread and it helped the OP...
Re: System installer thinks my main drive is my time Machine backup and won't install.
KOT

I have the first generation ipod touch it's updated to the iOS 3.1.3. Anytime I try to download an app it says it needs to have iOS 4.3. We want to download apps for my daughter. Does anyone know of any children's apps for the iOS 3.1.3

I have the first generation ipod touch it's updated to the iOS 3.1.3. Anytime I try to download an app it says it needs to have iOS 4.3. We want to download apps for my daughter. Does anyone know of any children's apps for the iOS 3.1.3

Any joy ? I'm having same problem. Just bought two for my twins birthday and I think it was a big mistake!!!! Thanks

What's the correct order to install OEM Grid Control + DB + AS?

Hi everbody! I'm getting start on OracleAS and Grid Control.
What's the correct order to install:
* Enterprise Manager 10g Grid Control
* Database 10gR2
* Application Server 10gR3
(on RHEL4-Upd2)
or the order is not important?
I need have the environment for each oracle software ($ORACLE_HOME, $ORACLE_BASE)? Or install first one, and change the environment and install, change again and install, etc.. ? :)
Tks!

Hey Rafael! You only have to use the Grid Control CDS, AS, repository database and grid control software are installed automatically, so you dont have to worry about the order u should have to follow.
Anyways if u have already installed a database u can use that one as a repository.
about the enviorment variables i guess u´ll be prompted for just one only directory cause u only need to install the software only one time.
hope u find this interesting!!
Regards, Luis

I need to install CC versions of apps for an upcoming project

I mostly work with After Effects and Photoshop, only occasionally dipping in to Premiere, and so have always updated as and when updates come out. I have an upcoming project though that has been cut in the CC (not CC 2014) versions of apps, and the Producer/Editor wants to stay in the same versions of his apps. However, it seems that the ability to download previous versions of apps through the creative cloud has gone. What's the best way to get these back?
Also! Is it possible to direct link form Premiere CC to SpeedGrade CC 2014? As SpeedGrade is the app that I would most miss the changes between versions of.
Thanks!

Hi BBonlineB,
you can definitely install the CC version from your Creative cloud desktop application.
Refer this link: Creative Cloud Help | Install, update, or uninstall apps
And I am sorry but the features changes we have done in the CC-2014 version, your project in CC version can't be linked with the CC-2014 version.
The same version of product can only be linked with same version of another product.
I hope it helps.
Regards
Srishti A

I can't install the Creative Cloud app for desktop...

I've tried several times to install the creative cloud app (or any other app for that matter), I can download it but it won't install. I'm using windows 7. This is the message I get ...
I've been to the customer support website and followed the instructions for minimising start up apps and anti virus software - no luck! I've just signed up for cloud membership and I'm losing my patience with this, could someone at Adobe please help.
Many thanks

Mrw2020 please try the steps listed at http://forums.adobe.com/message/5834539#5834539 where this topic has been discussed.

Tried to upgrade and after uninstalling and reinstalling several times, keep getting "procedure entry point could not be located in dynamic link library" followed by "iTunes was not installed properly" Error 7.....Help, please??

Tried to upgrade as instructed and after uninstalling and reinstalling (even back to the former iTunes which I was happy with)several times, keep getting message "Procedure entry point could not be located in dynamic link library" followed by "iTunes was not installed properly" "Error 7". Help, please??

Entry point errors can usually be fixed by deleting the offending dll, then repairing the component it is part of from the programs and features control panel. Unfortunately you neglected to include the detail of which dll is mentioned.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Need to sign Lenovo in order to install our Remote Control app for our Customer - Help please!

Similar Messages

Maybe you are looking for