Need to test Production Backups on another server.
Dear Expert,
Our SAP Production server is running on HP-UX in cluster mode (ECC 6.0 with oracle 10g). We have sheduled Incremental database online backup (daily) and Full database online + redolog backup (on sunday) on disk, and getting successfull backups.
Now we wanted to test our backup, as it is a running production server so wanted to try on diffrent server.
So we are installing new server on windows 64bit machine with orale database. Our plane is to copy backupfiles of production server to newly installed server and try to restore it.
We need your suggetions on it and the correct way to test the backups if any.
As it is highly important activity, so please revert ASAP.
Regards,
Ajit
Hi Ajit,
I would recommend to test this scenario on HP-UX system only as your production server is on the same operating system.
If there is no urgency for testing the production backup, you can wait until your Quality Server refresh cycle.
You can refresh the Quality server using online/offline backup restore method (backup of production server).
This way, you will get 2 benefits..
1. Your Quality server will be refreshed with production data
2. You can test Production backup consistancy more efficiently.
Refer the link below for more details:
For Official System Copy Guide:
[https://websmp207.sap-ag.de/form/sapnet?_SHORTKEY=01100035870000659894&|https://websmp207.sap-ag.de/form/sapnet?_SHORTKEY=01100035870000659894&]
Another Short steps:
[http://www.saptechies.com/system-copy-guides/|http://www.saptechies.com/system-copy-guides/]
Regards.
Rajesh Narkhede
Similar Messages
-
Hi,
I made a backup using rman and the following: RMAN> backup database;
can I restore this backup on another server? If yes how can I do this?
Thank youGo for RMAN duplication. Check the links below.
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmdupdb.htm#i1008564
http://www.akadia.com/services/ora_duplicate_database_rman.html
http://www.shutdownabort.com/quickguides/
Regards
Asif Kabir -
Hello!
This is the scenario:
I have a primary database(oracle 10g) and a standby database, created using Rman.
Is there a way to backup the standby database and transfer the backup to another server, so I can have the database in a third server that is neither primary nor standby.
Thank in advance!Hi user10385894,
Is there a way to backup the standby database and transfer the backup to another server?Yes you can copy the backup pieces from the standby side to the third server and copy a controlfilecopy from the primary and register the backup pieces.
Followed by a restore.
Do you happen to have a catalog than even a duplicate can be done easely?
Regards,
Tycho -
Hi,
I am using oracle database 11g, and I am taking RMAN backup in the same server.
But now I need this RMAN backup to be saved on another server.
I created one database directory, but it did not work with me, since it cannot see the location.
I used the same idea with export file to another server and it worked.
But with RMAN directory it could not work !!!.
So any idea about this ?
Thanks and Best Regards.
Pure,Pure wrote:
Hi,
I am using oracle database 11g, and I am taking RMAN backup in the same server.
But now I need this RMAN backup to be saved on another server.
I created one database directory, but it did not work with me, since it cannot see the location.
I used the same idea with export file to another server and it worked.
But with RMAN directory it could not work !!!.
So any idea about this ?
Thanks and Best Regards.
Pure,How do I ask a question on the forums?
SQL and PL/SQL FAQ
my car does not go.
tell me how to make my car go.
Is COPY & PASTE broken for you? -
I have a product key for Windows server 2012 Standard ROK edition and need to downgrade it to windows server 2008 Enterprise edition.
Hi,
Based on my research,
Windows Server 2012
Standard edition
can be downgrade to any prior version of Standard and Enterprise or Essentials editions.
For more detailed information, please refer to the links below:
Understanding
downgrade rights
WS2012_Licensing-Pricing_FAQ
Best regards,
Susie -
Restoration of Cold backup on another server
Hi ALL,
Question: 1) I have cold backup of sunday using User managed backup on A server & all archivelogs upto wednesday on A server.
2) I transfer my cold backup & archivelogs on B server.
3) Now I need to recover my B server's database upto wednesday.
Note: 1) I have same location of datafiles,controlfiles.redologs on B server as of A server..
Please Help
Regardsuser13364785 wrote:
Hi ALL,
Question: 1) I have cold backup of sunday using User managed backup on A server & all archivelogs upto wednesday on A server.
2) I transfer my cold backup & archivelogs on B server.
3) Now I need to recover my B server's database upto wednesday.
Note: 1) I have same location of datafiles,controlfiles.redologs on B server as of A server..
Please Help
RegardsIf your OS is windows then you have to create OracleService using oradim utility,then create need directory for data/control/log files and according background/diag/trace also parameter file.
After creating these directories startup mount database using STARTUP MOUNT PFILE='PFILELOCATION' then issue command RECOVER DATABASE USING BACKUP CONTROLFILE in this case oracle will read default location of archive logs and will apply,if this directory is different then main server then execute RECOVER DATABASE USING BACKUP CONTROLFILE UNTIL CANCEL and apply archive logs manually and open database with ALTER DATABASE OPEN RESETLOGS. -
Restore Rman backup on another server
Hi.,
I am taking oracle 10g rman Incremental backup level 1
on Sunday I am taking full backup.
No Repository catlog is used.
I want to restore all the database using the backup of RMAN on the another server .
Can you tell mi whats are the step to restore on another server .http://download-uk.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmrecov002.htm#sthref723
-
Production moves to another server with existing streams replication
Hi All,
We have oracle bi directional streams replication setup between 2 server(us and uk). Everything is working as expected.
But,We are going to move UK server from (ex: cam19 to cam29).
Will it impact on replication setup.
we will restore new server via cold backup.Also we will stopped all the process on both the sides ,before cold backup.
Can you please suggest? What should we do before doing that.
How we can avoid any problem while moving server.
so it will not impact on replication.
Thanks in advance!!!!
Many Thanks
nickThanks a lotz Anurag..
I have one small question not on same topic, Its regarding table add in existing replication setup.
What happened ,When we add a new table to existing replication setup if any reason table is not replicating between two database then we have to remove the rules for that particular table and setup again. Some time what happened we got error "queue has errors" i dont know the ORA number.
in that case what cases when apply process ABORETED and when we try to start the process it gives same error and ABORTED again.
then we have remove the whole replication Manually and setup again. It's very horriable....
Could you please help that before drop the rules for particular table then wht should we do ? Do we need to unscheduled the propagation process and then drop the rules becuase i read on metalink that negative rules drops while propagation process using the same rule set.
Please Suggest!!!!!!!!!!
Many Thanks -
RESTORE BACKUP IN ANOTHER DATABASE
Hi,
I used RMAN to make a full backup of the a database production. Now, I need recovery this same backup in another database from test. It is in another machine. How can I do it?
My work so far:
- I copy de backups files to another machine, with another database which was installed a same version of the Oracle Database 10g.
- I put the test database to run in archivelog mode
And now?
Sorry my english.
Thanks
Message was edited by:
user523458Hi,
Since 2 weeks ago, I´m trying clone a production database into a test database.
I´m search, search so much and I did not arrive the place some. I write and execute the following script:
==========================================================================
RMAN> run {
2> SET NEWNAME FOR DATAFILE 1 TO '/u02/oradata/oralab/system01.dbf';
3> SET NEWNAME FOR DATAFILE 2 TO '/u02/oradata/oralab/undotbs01.dbf';
4> SET NEWNAME FOR DATAFILE 3 TO '/u02/oradata/oralab/sysaux01.dbf';
5> SET NEWNAME FOR DATAFILE 4 TO '/u02/oradata/oralab/users01.dbf';
6> SET NEWNAME FOR DATAFILE 5 TO '/u02/oradata/oralab/integracao.dbf';
7> SET NEWNAME FOR DATAFILE 6 TO '/u02/oradata/oralab/legis_data.dbf';
8> SET NEWNAME FOR DATAFILE 7 TO '/u02/oradata/oralab/NOVA_INTERNET';
9> SET NEWNAME FOR DATAFILE 8 TO '/u02/oradata/oralab/legis_text.dbf';
10> SET NEWNAME FOR DATAFILE 9 TO '/u02/oradata/oralab/log01.dbf';
11> SET NEWNAME FOR DATAFILE 10 TO '/u02/oradata/oralab/tecwin_web.dbf';
SQL 'ALTER SYSTEM ARCHIVE LOG CURRENT';
12> 13> 14> 15> DUPLICATE TARGET DATABASE TO ORALAB
16> PFILE=/u01/app/oracle/product/10.1.0/Db_1/dbs/initoralab.ora
17> LOGFILE
18> GROUP 1 ('/u02/oradata/oralab/redo01.log','/u02/oradata/oralab/redo01b.log') SIZE 10M REUSE,
19> GROUP 2 ('/u02/oradata/oralab/redo02.log','/u02/oradata/oralab/redo02b.log') SIZE 10M REUSE,
20> GROUP 3 ('/u02/oradata/oralab/redo03.log','/u02/oradata/oralab/redo03b.log') SIZE 10M REUSE,
21> GROUP 4 ('/u02/oradata/oralab/redo04.log','/u02/oradata/oralab/redo04b.log') SIZE 10M REUSE,
22> GROUP 5 ('/u02/oradata/oralab/redo05.log','/u02/oradata/oralab/redo05b.log') SIZE 10M REUSE;
23> }
EXIT
==========================================================================
And I obtained the following result :
==========================================================================
executing command: SET NEWNAME
using target database controlfile instead of recovery catalog
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
sql statement: ALTER SYSTEM ARCHIVE LOG CURRENT
Starting Duplicate Db at 07-AUG-06
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: sid=160 devtype=DISK
contents of Memory Script:
set until scn 213934104;
set newname for datafile 1 to
"/u02/oradata/oralab/system01.dbf";
set newname for datafile 2 to
"/u02/oradata/oralab/undotbs01.dbf";
set newname for datafile 3 to
"/u02/oradata/oralab/sysaux01.dbf";
set newname for datafile 4 to
"/u02/oradata/oralab/users01.dbf";
set newname for datafile 5 to
"/u02/oradata/oralab/integracao.dbf";
set newname for datafile 6 to
"/u02/oradata/oralab/legis_data.dbf";
set newname for datafile 7 to
"/u02/oradata/oralab/NOVA_INTERNET";
set newname for datafile 8 to
"/u02/oradata/oralab/legis_text.dbf";
set newname for datafile 9 to
"/u02/oradata/oralab/log01.dbf";
set newname for datafile 10 to
"/u02/oradata/oralab/tecwin_web.dbf";
restore
check readonly
clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 07-AUG-06
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backupset restore
channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to /u02/oradata/oralab/system01.dbf
restoring datafile 00002 to /u02/oradata/oralab/undotbs01.dbf
restoring datafile 00003 to /u02/oradata/oralab/sysaux01.dbf
restoring datafile 00004 to /u02/oradata/oralab/users01.dbf
restoring datafile 00005 to /u02/oradata/oralab/integracao.dbf
restoring datafile 00006 to /u02/oradata/oralab/legis_data.dbf
restoring datafile 00007 to /u02/oradata/oralab/NOVA_INTERNET
restoring datafile 00008 to /u02/oradata/oralab/legis_text.dbf
restoring datafile 00009 to /u02/oradata/oralab/log01.dbf
restoring datafile 00010 to /u02/oradata/oralab/tecwin_web.dbf
channel ORA_AUX_DISK_1: restored backup piece 1
piece handle=/u03/admin/integra/flash_recovery_area/INTEGRA/backupset/2006_08_07/o1_mf_nnndf_TAG20060807T103544_2fg5w27d_.bkp tag=TAG20060807T103544
restore not complete
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 08/07/2006 14:36:15
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 10 found to restore
RMAN-06023: no backup or copy of datafile 9 found to restore
RMAN-06023: no backup or copy of datafile 8 found to restore
RMAN-06023: no backup or copy of datafile 7 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN>
Recovery Manager complete.
==========================================================================
But the Backuset is OK, look:
==========================================================================
RMAN> list backupset of database;
using target database controlfile instead of recovery catalog
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
264 Full 24G DISK 01:33:39 07-AUG-06
BP Key: 264 Status: AVAILABLE Compressed: NO Tag: TAG20060807T103544
Piece Name: /u03/admin/integra/flash_recovery_area/INTEGRA/backupset/2006_08_07/o1_mf_nnndf_TAG20060807T103544_2fg5w27d_.bkp
List of Datafiles in backup set 264
File LV Type Ckp SCN Ckp Time Name
1 Full 213646558 07-AUG-06 /u03/integra/system01.dbf
2 Full 213646558 07-AUG-06 /u03/integra/undotbs01.dbf
3 Full 213646558 07-AUG-06 /u03/integra/sysaux01.dbf
4 Full 213646558 07-AUG-06 /u03/integra/users01.dbf
5 Full 213646558 07-AUG-06 /u03/integra/integracao.dbf
6 Full 213646558 07-AUG-06 /u03/integra/legis_data.dbf
7 Full 213646558 07-AUG-06 /u03/integra/NOVA_INTERNET
8 Full 213646558 07-AUG-06 /u03/integra/legis_text.dbf
9 Full 213646558 07-AUG-06 /u03/integra/log01.dbf
10 Full 213646558 07-AUG-06 /u03/integra/tecwin_web.dbf
=========================================================================
I create the dir "/u03/admin/integra/flash_recovery_area" in the AUXILIARY database
and mount - with NFS - where the backupset were in the PRODUCTION database.
1 - The share it´s work fine.
2 - The RMAN backup it´s work fine.
3 - The restore to another database "IN DIFERENT MACHINE" dont´s work.
I am certain of that the file of backupset exists.
Somebody can help me? Why this script don´t work?
PS.: Sorry my English. I´m practising
Thanks
Message was edited by:
user523458
Message was edited by:
user523458
Message was edited by:
user523458 -
Expdp using directory on another server
I've got a serious issue here and hoping someone can help.
Oracle 10.2.0.4
HP-UX 11.21
I have an export from a large (2Tb) database that I need import into a database on another server, but there isn't enough room to put the export file on that server. We do not have enough space to add, and we are prohibited from using NFS.
I thought perhaps I could run the impdp command from the server containing the export dump (similar to how we did it with exp/imp), but I can't seem to figure out how to do it.
I tried using network_link, but that won't work because directories and network_links are mutually exclusive.
I tried creating a directory in my local database and then set my ORACLE_SID to my local database and try running expdp to the remote database, but datapump only reads the directory of the database it is importing into.
Any other ideas?
Please help!Yes, I'm sure directories and network_liknks are mutually exclusive.
Import: Release 10.2.0.4.0 - 64bit Production on Tuesday, 14 September, 2010 9:44:39
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
UDI-00011: parameter dumpfile is incompatible with parameter network_link -
How to restore cold backups on other server
Hi all
On Oracle9i production server, we have windows scheduled job to take the cold backups every day night. The size of the database is 2GB.
Now, the cold backup consists of
- Database files & Log files
- Parameter file
- Control file.
I am required to check the validity of the cold backup we have. So, I need to restore the database in another server.
So, please provide me the steps I need to do to restore the database.
Thanks.See Chapter 3 "Performing User-Managed Restore Operations" of the
"Oracle9i User-Managed Backup and Recovery Guide Release 2 (9.2)" (Part Number A96572-01)
http://download.oracle.com/docs/cd/B10501_01/server.920/a96572/osrestore.htm#26029
Best to start with Chapter 1 "Introduction ..."
http://download.oracle.com/docs/cd/B10501_01/server.920/a96572/intro.htm#431510
and Chapter 2 "Making User-Managed Backups"
http://download.oracle.com/docs/cd/B10501_01/server.920/a96572/osbackups.htm#10000
If you are on Windows note that besides installing the sofwtare you must also create the Oracle Service before you restore a database backp to another server.
See Chapter 6 "Backing Up and Recovering Database Files" in the Oracle Database Administrator's Guide for Windows
http://download.oracle.com/docs/cd/B10501_01/win.920/a95491/backup.htm#1004903 -
Hi,
I am using oracle 11g R2 with oracle application express 4.0.
Oracle database running on windows server 2008 R2 enviroment.
I need to create directory on another server, beacuse I need to store some files on another server.
How can I do it ??
Any suggestion??
With Best Regards.Hi,
ups - forgotten this one. The running Oracle process does not have access privileges for mapped network drives by default. So you need to
setup the Oracle service in a manner that the process can "see" the mapped network drives .. That is windows-specific ...
Maybe these articles help ...
http://asktom.oracle.com/pls/asktom/f?p=100:11:4352309546273981::::P11_QUESTION_ID:241814624807
http://www.dbforums.com/oracle/983402-utl_file-network-copy-problem.html
Does this help ..?
Best regards
-Carsten -
How to test restore in another server?
Hi,
I want to test full backup (hot backup using RMAN) of my DB (11.2 SE) on another server (I didn't install DB on yet).
Saad,to test the backup -which is done by third party softwareHow you restore really depends on how you backup the database !
Without knowing how the backup is done it would be incorrect to advice a single method to test restoration.
Nevertheless, you need to start with an installation of Oracle software (RDBMS, Binaries) on the new test server. You would have to install the same Oracle RDBMS Release and Version as the one that is running in your production server (where the backup was taken). If the third party software incorporates media management libraries, you'd need to install and configure them as well. Thereafter, the restore command depends on how the backup is done.
Hemant K Chitale -
RMAN backup from another DB server
Hi all,
I would like to know Can we take a rman backup from another DB server in oracle 9.2...
i.e
suppose that we have two server
1. main server
2. dup server
I want to take a backup of main server throeugh dup server.....
if it is poosible then what are all the things that i have to configure....
pls suggest me.....getting an error,
here hotest is the main db
and testho is dup db
F:\Documents and Settings\deepali>rman target rman/cat@hotest catalog rman/cat@testho
Recovery Manager: Release 9.2.0.4.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
connected to target database: HOTEST (DBID=982176707)
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04004: error from recovery catalog database: ORA-01045: user RMAN lacks CRE
ATE SESSION privilege; logon denied
F:\Documents and Settings\deepali>sqlplus /nolog
SQL*Plus: Release 9.2.0.4.0 - Production on Mon Apr 6 12:17:13 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> conn sys/deepali as sysdba
Connected.
SQL> GRANT RECOVERY_CATALOG_OWNER TO rman;
Grant succeeded.
SQL> GRANT CONNECT, RESOURCE TO rman;
Grant succeeded.
SQL> exit
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.4.0 - Production
F:\Documents and Settings\deepali>rman target rman/cat@hotest catalog rman/cat@t
estho
Recovery Manager: Release 9.2.0.4.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
connected to target database: HOTEST (DBID=982176707)
connected to recovery catalog database
recovery catalog is not installed
RMAN> register database;
recovery catalog is not installed
recovery catalog is not installed
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of register command at 04/06/2009 12:18:09
RMAN-06429: RCVCAT database is not compatible with this version of RMAN
RMAN> select * from rc_database;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01005: syntax error: found "identifier": expecting one of: "allocate, alter
, backup, beginline, blockrecover, catalog, change, connect, copy, create, cross
check, configure, duplicate, debug, delete, drop, exit, endinline, host, {, libr
ary, list, mount, open, print, quit, recover, register, release, replace, report
, renormalize, reset, restore, resync, rman, run, rpctest, set, setlimit, sql, s
pool, startup, shutdown, send, show, test, upgrade, validate"
RMAN-01008: the bad identifier was: select
RMAN-01007: at line 1 column 1 file: standard input
RMAN>pls suggest me whether i am following the right path or not... -
Transport a request from one server(quality) to another server(production)
Hi All,
I want to transport a request from one server(quality) to another server(production)
Can we transport a request from quality to production programatically i.e. by using programing logic.
Regards,
SwarupHi,
It cannot be done programmatically. Although it can be automated by basis guys. They configure it in TMS (Transport Management System). You can check it using STMS. (if you are authorized to view it).
Transport path are defined in TMS.
For Automated Transport configuration is done in TMS.
Generally automatic Transport are not setup between quality and production. Changes are first tested in Quality and then Transported by basis team either periodically / individually.
In case of manual transport Transport Request can be imported in production using STMS_IMPORT transaction in production. (Basis guy will do it for approved Transports)
If there is no direct connectivity - Basis people copy "data" file and "co" file and Transport it to target server (This is generally not the case in Quality - production as Transport path is always defined).
Regards,
Mohaiyuddin
Maybe you are looking for
-
Recoding to eliminate the need for PLSQL_NAME_RESOLUTION in 10g
Up until now (in forms 6i) we've been using this workaround, as we have quite a lot of instances in forms libraries where a procedure in the library calls another procedure back in the form. We're now going to forms 10g and realise we need to recode,
-
Download of legacy version - Acrobat X Standard (supplied with DELL laptop)
Hi, I have to re-install my DELL laptop purchased with a Acrobat X Standard license. After spending some 2 hours for searching I'm desperate ... I can't find a download for this version. Is there any database for such old versions ?!?
-
Sound plays fine but the video is too slow to even start a project.
-
I signed up for free trail 1 day ago and went to use it today and it says expired
i signed up for free trail 1 day ago and went to use it today and it says expired
-
Hi! Do you tell me a easy way to change a row color in report, when a column table have a specific value? Thanks