Need to transfer Custom infotype data using IDOCs

Hi,
My requirement is to transfer custom OM infotype changes using IDOCs.
But its not creating any change pointers for that infotype.
The message used is a copy of standard message OM_HRMD_A.
Can any one please help me out in this issue.
Thanks,
Sarika

You'll need to erase the drive by booting up holding command-option-r keys into your Recovery Volume.
Use Disk Utility to erase the disk and then Internet Recovery. That will take a while.
http://support.apple.com/kb/HT4718

Similar Messages

  • How to upload different views of customer master data using LSMW-IDOC

    I need to upload customer master data  using LSMW Idoc method for my client. Now customer will have different views like main view, Sales data, Company code data, Partner function data etc. And except main data all other data can be multiple for each customer. We are going to upload data from tab delimited .TXT file. Should I propose different LSMW for upload different views for the customer from different .TXT files? or we can upload all the customer related data (like main view data and partner function data )from a single .TXT file. Kindly suggest which one in convenient and how we can prepare the data file in both cases.

    convinient is the method that you can handle.
    but as the guy who loads the data you have to load the data like they are available, like it is convinient for others to prepare the data.
    In general there is no problem to use an IDOC method to load a customer master with multiple comany codes and several sales orgs in one shot.
    the data can be in one source file, but need then to be maintained in a certain way
    Example1: all data in 1 structure
    GD1 - CC1 - SO1
    GD1 - CC2 - SO2
    GD1 - CC2 - SO3
    in this case the GD (general data) is redundand in each line which has different Company code data or different Sales Org data
    Example2: all data in 3 sturcures but one file
    GD1
    .CC1
    .CC2
    ..SO1
    ..SO2
    ..SO3
    Example3: data delivered in 3 files - you join the files in LSMW, they must have a common identifier like the old customer number in the beginning of each file
    FILE General data:
    GD1
    GD2
    GD3
    file Compamy code data:
    CC1
    CC2
    CC3
    file Sales org data:
    SO1
    SO2
    SO3
    LSMW is flexible and can handle each of this scenarios, are you flexible too?

  • Customer creation in R/3 from PI data using IDOCs

    Hi All,
    I am creating customers in SAP r/3 system using IDOCs which are coming from PI system in the form of XML files.
    For that DEBMAS and ADRMAS message types and DEBM process code is used for creating or changing customer master data.
    Existing functionality : 1 IDOC is creating/changing 1 customer master data using standard function module IDOC_INPUT_DEBITOR.
    Required Functionality: need to create/change data for multiple customers using only one IDOC file.
    I have tried using DEBMDM. Unlike DEBMAS, message type DEBMDM can hold  multiple customers but if any DEBMDM IDOC sent to R/3, it was remaining in status 75 with message 'IDOC Received via qRFC'.
    Any help will be appreciated.
    Thanks & Regards,
    Anshoo

    Hi,
    Status 75 refers to that "IDoc is in inbound queue".
    Transaction SMQ2 (qRFC Monitor - Inbound Queue)
    Transaction WEINBQUEUE (IDoc Inbound Queue).
    The transactional asynchronous tRFC guarantees that all database operations are fully executed or, if one of the function modules responds with a termination, they are fully rejected (rollback). If an LUW is executed without errors, it cannot be executed again. In some cases it may be necessary, to rollback an LUW in an application program, for example, because a table is locked.
    Regards,
    Srilatha.

  • How to resolve error while importing data using IDoc method in LSMW ?

    Hi
    I am trying to import my data using IDoc method in LSMW.
    But after completing the whole LSMW process, when I look into the IDOC generated, the error description is as this.
    It talks about the process code and other stuff.
    Function module not allowed : APPL_IDOC_INPUTI
    Message No. B1252
    Diagnosis :
    The function module APPL_IDOC_INPUTI and the application object type which were determined are not valid for this IDoc.
    I am not able to resolve the problem.
    Please help.
    Regards,
    Rachesh Nambiar

    check the below link.
    /people/stephen.johannes/blog/2005/08/18/external-data-loads-for-crm-40-using-xif-adapter

  • I am unable to upload the customer master data using BAPI.?

    Hi Guru's,
    i am unable to upload the customer master data using BAPI.(BAPI_CUSTOMER_CREATEFROMDATA1)
    Please guide me how upload the data...
    Thanks in iadvance
    Srinivas...

    Hello Srinivas
    This BAPI does not allow to create a new customer from scratch but only to copy an existing customer to a new one and change its address data.
    The reference customer has to be provided using IMPORTING parameter PI_COPYREFERENCE. See also the BAPI documentation for more details.
    The BAPI does the same like transaction XD01 with Reference.
    Regards
      Uwe

  • I have a new macbook air, and want to transfer all my data using time machine from my old macbook running leopard, is this possible and easy

    I have a new macbook air, and want to transfer all my data using time machine from my old macbook running leopard, is this possible and easy and will it transfer all my musc and photos?

    The Setup Assistant can restore your data from a Time Machine backup. You'll be asked if you want to do this the first time you turn the computer on.
    (60797)

  • Custom infotype data from rec to pa

    Dear Gurus
    We have some custom infotypes for the applicant, while we perform the hire applicant action, the same infotypes data  should be transferred to PA how to do this
    Kindly suggest
    Thanks
    Kumar

    Dear praveen
    We have 2 custom infotypes, developed for the purpose recruitment , once the applicant is selected and joined, we perform the hire applicant action, then what ever these 2 custom infotypes data, which there is  in the recruitment data base, should be transferred to PA data base

  • Moving shipment data using IDOC SHPMNT05

    Hi guys,
    I want to configure ALE process across two SAP systems and moved shipment data using IDOC SHPMNT05.
    May I know how to do that.
    Plz help me...................
    Thankz in advance,
    Swetha.

    Hi Shwetha,
    Please check the following links to start with.
    http://help.sap.com/saphelp_nw04/helpdata/en/78/217da751ce11d189570000e829fbbd/content.htm
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    Thanks,
    Naren

  • How to use segment ZCRMXIF_PARTNER_SAVE01 in LSMW to Generate/Change BP data using IDOC

    Hi Gurus,
    I have an requirement to add contact person first name and last name using Relationship kind as '0001' for an BP.
    This requirement i need to work with LSMW and generate IDOC for respective changes.
    To work with LSMW and IDOC i need to pass data to ZCRMXIF_PARTNER_SAVE01.
    Can you all suggest me what are the mandatory fields to be passed to this segment and what are the fields to which i can pass FIRST NAME and LAST NAME of the CONTACT PERSON of the BP.
    Please post me your replies in detail iam new to crm i can understand.
    Thanks & Regards,
    Saravanan Sambandam

    Hi Saravanan,
    Which method you used.
    Regards,
    Madhu.

  • How to Fill custom table data using standrad BAPI

    Hello Team,
    I have some clarification on usage of Standard BAPI :  BAPI_Material_savereplica.
    I have some custom fields in MARA and MARC tables so i have used BAPIExtensionin and able to pass custom field of MARA and MARC.
    My issue is in material master the MARC custom fields of a material are going to update in a Z table along with MARC table.
    So can we achieve this functionalioty using BAPI : BAPI_Material_savereplica menas can we upadate custom table by using standarda bapi
    Please let me know the available options ..

    Hi Some,
    You are saying most of the data is resides out of sap, then you try with mapping of those data in sap standard tables if match or if not then develop a custom interface which will read data from outside & will put in your pay roll processor interface,
    and normally your SAP data you can interface through PU12.
    If you want single interface then you need to develop unique interface program.
    All the best.

  • Delete InfoType records using Idoc HRMD_A05?

    Hello,
    We have some unwanted 167 and 168 infotype records in our database that we would like to clean up.  Can we use HRMD_A05 to delete them?  I can't seem to find a delete function in the Idoc fields...I would truthfully like to use the LSMW, anyone know a way other than a simple recording?
    Thanks.
    --Jack

    Hi Eswar
    Thanks for the reply. I could not get what PFAL is. Actually, I am using IDocs to migrate data through LSMW. And I want the new HR objects to be numbered internally. However, if I leave the object ID field null and use 'Insert' for operation (OPERA) it gives error and does not post the application document (IDoc). It also gives error for operation 'Update'.
    I was expecting it would generate new numbers but it did not. And what I had in the IDoc documentation does not work.
    So do you or anybody has experienced such an issue before?
    Thanks

  • Need help in populating Text ID using IDOC ORDERS05

    I have following scenario.
    PO is being send from ECC to EDI partner.
    and we received the PO feedback from the EDI partner
    For PO feed back, we are using ORDERS05 idoc type and ORDRSP message type.
    Custom Text Id(F01)  has been added to the Text tab of the header section of the Purchase order screen (ME23N).
    Custom Text id (F02)  has been added to the Text tab of the Item section of the purchase order screen.
    (Text ID F01 and F02 are in object EKKO - checked in transaction se75)
    Now, I m posting idoc with the following value but Text field (in header and item level) is not updating while displaying PO.
    Header - E1EDKT1                                   
         TDID -   F01
         TSSPRAS- E     
                         TDOBJECT - EKKO
                  E1EDKT2                                   
         TDLINE   -  "My Header Text"
    Item Level - E1EDKT1                                   
         TDID -   F02
         TSSPRAS- E     
                         TDOBJECT - EKKO
                  E1EDKT2                                   
         TDLINE   -  "My Item level Text"
    Can we update the Text Id in PO using IDOC ORDRSP.ORDERS05?  I have tried but it is not updating
    Any suggestion.
    Edited by: Chetankumar Patel on Mar 14, 2011 10:17 PM

    Have you tried with updating other Long texts ? While going through the code of inbound function module IDOC_INPUT_ORDRSP, it is mentioned that only limited fields are available for updation.  See remarks in line no : 88 of include LEINMF2O.
    read document and prepare for update P.O. Item fields
    * possible Update fields of EKPO: LABNR, IDNLF, NETPR

  • Customer master creation using IDOC

    Hi friends,
               I am trying to create customer master into SAP using Idoc. Here pblm is some partner functions already defaulted i want to create some new entries in partner functions when i try to do it online its working fine when i try with idoc the defaulted partner functions are appears double times can any one has any idea whts happening.
    E1KNVVM   
        E1KNVPM (Master customer master partner roles)
            MSGFN : Function
            PARVW : Partner function
            KUNN2 : Customer number of business partner
            DEFPA : Default partner
            KNREF : Customer description of partner 
            PARZA : Partner counter
    the pblm is with these segment.
    Thanks,
    Naren.

    Hi naren,
    The segment E1KNVPM is standard one.Nothing can be done over it . U shold create new segments in we31 and add as
    extension to the basic type and try..
    Regards,
    Nagaraj

  • Problem in filling Custom segment data using User Exit for ZORDERS05

    Hi,
    I am using Process Code SD10 to generate the custom Idoc ZORDERS05.
    The function module used is IDOC_OUTPUT_ORDRSP.
    I am able to succesfully generate the Custom Idoc (VA02->Extras->Header->Edit) but unable to populate the custom segments in the IDOC.
    I have tried to write the code in User Exit EXIT_SAPLVEDC_003 -> ZXVEDU15. But still I'm unable to populate the Z segments.
    Even though I place a break point in the FM or in the User Exit during the generation of Idoc the control doesn't stop in FM nor in the User Exit.
    I am unable to understand how to go about this.
    Can anybody please help me with this?
    Thanks in Adavance,
    Rohan.

    Okay I under what you are speaking about NACE.
    Yes that configuration has been done and I am sucessfully able to generate the IDOC.
    But even though I know that in FM IDOC_OUTPUT_ORDRSP, I have to write code in User Exit EXIT_SAPLVEDC_003 to populate the Z segments; I'm unable to understand y the control doesn't pick the FM and Exit.
    Right now I have code in the Exit to fill Z segments.
    Thanks
    Rohan.

  • Include custom infotype 9101 in IDOC

    We have configured infotype 9101 and want to include it in an IDOC (HRMD_A07) to be passed to Novell identity management.  The appropriate entries have been made in T777D but identity management does not recognize it.  I have been told it is not in the correct format however it is very similar to infotype 1013 and it looks to me to be formatted the same.
    I am new to IDOCs and would appreciate any suggestions.
    Thank you in advance!
    Pat

    You have to run RPUMS40CCI for all your Custom Infotypes to generatte the missing includes.
    ~Suresh

Maybe you are looking for