Need to Turn it OFF the Notification used by the AIA Common Error Handler.
Hi All,
My requirement is to turn it off the Notifcation send by the AIA common Error Handler, when the error occurs in the AIA ecosystem.
Error Handling framework given by AIA does the Notification and Logging feature. In my case I need only the logging, but not the Notification. Notification has to be turned off for a time and has to be turned on when it is required.
1) I can acheive this by removeing the email account file (ie. ns_email.xml) from the server directory and can be replaced at the time when required,but this needs the restart of the Server.
Any Idea how to turn it off the notification and turn it on when required ?
Thanks,
Ashok.
Hi Rohit,
Thanks for your reply.
Is there any way to turn it off the Notification, because if we retire the ReadJMSNotification Service all the error message are stayed in the Topic and we have to manually drain the message from topic.
And one more thing is how the error messages are published to that AIA.AIA_Error_Topic.
Thanks,
Ashok.
Similar Messages
-
Hello, I downloaded an ntfs systemfile from tuxera and used it to convert a usb stick so I could put more than the fat32 4gb on, my Imac froze a while after so I turned it off the on and now I have blue vertical lines on boot up and the a white screen with lots of tine blue symbols after, mouse pointer moves but thats about it.
Have used R and cmd to get a menu up but once I choose one of the four options my mouse is rendered useless and I cant get any further, have downloaded, to another usb stick recovery disk assisstant and am trying to use that in conjunction with the lion option on the previously mentioned screen, computer was responding really slowly and has now frozen on the terms of software license agreement (maybe the last hurdle!) can anyone pleeeeeease help!!!!!??????It's likely that the boot drive is failing, or that there's some other hardware fault. Run the Apple Hardware Test.
Intel-based Macs: Using Apple Hardware Test
Even if the test is negative, you should make a "Genius" appointment at an Apple Store to have the machine tested more thoroughly. -
I have a macbook pro 15 retina - when ever I connect to bluetooth speaker, I get this loud noise coming from the speaker - if I turn bluetooth off, the noise is now coming from the macbook speakers & stays until i restart.
Hi John. Thanks for that input. At Step 6, after clicking "Next" I get a window telling me my OS version is unsupported and the installation may not complete. I am prompted to go to Canon's web site to "Check Latest Info".
I've had this window on previous attempts and from Canon's web site I downloaded two drivers as follows
- ICA Driver V4.0.0
- Canon IJ Network Tool V4.5.0
I'm not sure if these are the correct / complete drivers I need for this install or not.
I continue to follow all the steps. At step 9 I click "Wireless Set Up using USB" amd get a License Agreement (a little different than instructions)
I click "Agree" and it goes to a Setup window with two progress bars showing the installation. I've not been prompted to connect the USB?
After the Setup window is done, I am then prompted to connect the printer via USB. I connect the printer and click on "Redetect". It is not detected.
I then try following the Canon on screen instructions for connecting to the wireless LAN amd enter the password. It searches and indicates "Connecting" on the window, but it never connects and the blue light just blinks
So, at this point I am stuck??
Thanks
Stephen -
Need to turn bluetooth off after sleep so that apple mouse is 'seen' again
i have an apple bluetooth mightymouse bluetooth. after my macbook pro goes to sleep, i need to turn bluetooth off then on again on the MBP so that the bt mouse is seen again. if i don't do that, the mbp never reconnects with the mouse. any hints?
I have set off the 'allow bt devices to wake up computer from sleep' to save battery life on the mbp.
pI use a Kensington PilotMouse Bluetooth and it looses it's connection from the MBP because the mouse turns off to prolong battery life. When I return the computer from sleep, I have to click the mouse buttons a few times... and wait up to 10 seconds, but it eventually reconnects once the laser on the mouse turns back on. Have you tried this?
I hope this helps.
Take care,
Chris -
Screen cracked, Need to turn phone off completely.
Off course, less than a week after my boyfriend gets this phone, he drops it and the screen cracked. We DO have insurance, but have to wait a week till payday for the deductible. Here is my problem.
Screen is cracked, phone is still on. I need to turn it off, as the alarms he has set for work keep sounding and are a pain to stop, as he has multiple each day. I know I can wait for the battery to die, of of course, BUT
I've read that I can do what is comparable to a battery pull with the volume down + power button for 10 seconds. I have done this, but it seems to restart rather than turn off. Is this what that action should do? Or am I doing it wrong. If this is what the action should do, am I out of luck until the battery dies?This is what I found in the manual, page 55 in the Troubleshooting area for your device...
Crash recovery
In the unlikely event that your smartphone stops
responding to touches and key presses, try a forced
reboot—press and hold both Power and the down
volume key for 10 seconds.
http://cache.vzw.com/multimedia/mim/mot_droid_razr/droid_razr_manual.pdf -
i have an unknown message on my iMac telling me to turn it off, the computer has also frozen apart from that massage?
Sounds like a kernel panic.
What is a Kernel Panic?
http://support.apple.com/kb/TS3742
and http://support.apple.com/kb/TS1892?viewlocale=en_US
http://developer.apple.com/mac/library/technotes/tn2002/tn2063.html
More details here:
http://www.thexlab.com/faqs/kernelpanics.html
Useful articles on how to avoid and eliminate kernel panics here:
http://reviews.cnet.com/8301-13727_7-10344626-263.html?tag=mfiredir
http://www.macworld.com/article/2027201/how-to-troubleshoot-a-kernel-panic.html# tk.nl_mwhelp -
I no longer have my iphone and need to turn imessage off
i no longer own an iphone and need to turn imessage off but i no longer have the phone at all so i cant turn it off myself
If youv'e ever called them they should have it on file. If you haven't call your carrier first and tell them that you need imessage turned off but don't have the imei number for the old iphone and ask if they still have it. Once you get it you can call apple and give them that number or have your carrier just route you straight to them.
-
A day ago, my phone was freaking out, saying all these apps had stopped working, so I turned off and immediately after turning it off the dual core screen with the red M came up and wont turn back on…
http://www.verizonwireless.com/support/knowledge-base-26502/
Above if battery pull/soft reset doesn't help. If it's boot looped may need new equipment -
Schedule possible to turn on/off the radio/WIFI transmission?
I want to know whether it's possible to set-up a schedule to turn on/off the radio/WIFI transmission for the Airport TimeCapsule?
For example: WIFI (radio) is turned off every evening at 23:00 hour and turned on again at 07:00 in the morningYes, it is there is in the setup.
Go to the network tab
Click on Enable Access Control and then Time Access Control which will open a second menu page.
Remember if you want an off time like 11pm and on time at 7am it is a different day.
So you set off from 11-11.59pm and 12.01-7am next day.
A 10sec google ..
http://9to5mac.com/2013/10/06/how-to-set-time-limits-on-your-wi-fi-network-using -airport-utility/
https://discussions.apple.com/message/22836329#22836329 -
cannot open the menu and cannot even turn it off, the white apple image is displayed on the screen. how can i get into the menu?
Hold down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears - ignore the red slider.
-
Can you turn shuffle off the ipod shuffle 4th gen?
can you turn shuffle off the ipod shuffle 4th gen?
Mellerris123 wrote:
can you turn shuffle off the ipod shuffle 4th gen?
Yes.
Power switch.
1st notch is Off.
2nd notch is play in order.
3rd notch is play shuffled. -
After my computer has been asleep and I touch my trackpad, it wakes enough to show my icon but not enough to acknowledge my keyboard or trackpad so I can type a password. It seems the only way to make it work it to turn it off the back button.
The reason, I included the annotation that I'd upgraded my Itunes, (On my Computer) is B/C in many forums - the very first question, *HELPERS* ask, is. "Do you have the latest version of Itunes downloaded on your computer." I wanted to knock out any obvious replies.
Now- "DO YOU have any idea,"... how your UNHELPFUL remarks, do absolutely nothing but hurt others that might not have the EXPERIENCE you have? How do you expect people to know things without asking questions? Whew! RUDE!!
Message was edited by: Apple I0S Help Team -
Cannot turn shuffle off the Ipod feature
My music keeps shuffling on my iPhone 4. What is the deal here? How can I turn it off when I set it so it wouldnt shuffle to begin with.
Mellerris123 wrote:
can you turn shuffle off the ipod shuffle 4th gen?
Yes.
Power switch.
1st notch is Off.
2nd notch is play in order.
3rd notch is play shuffled. -
When I try to stream Netflix on Safari, it says there is a display error and I need to turn airplay off but it is off.
Try another browser as a test.
Firefox -
In your experience what are the most common errors in binding files when deploying?
As the title suggest I'm interested in discussing the most common errors in binding files when deploying.
Reason for this is that I'm currently working on a Powershell script that can parse a binding file and create a reader friendly report (rtf format) with various information.
But the main purpose for this script is to find common errors in the binding file used. And so far these are the ones I've thought of:
- Tracking enabled for either services or the pipelines they are using (if it's a binding meant for Prod).
- Orchestrations logical ports not having any ports bound to them.
- URI containing certain words that's not ok. For example if a binding meant for Prod contains the word "test" anywhere in the URI then that should be reported in the created rtf report. This also applies vice versa.
So now I need your help with coming up with more ideas on common errors that need to be looked after and reported on if found!
Additional features the report should contain:
- Listing the details of each orchestration, send port, receive port along with their associated receive location(s). To better understand and get a quick overview on exactly what settings are planned to be deployed. Especially the "TransportTypeData"
section which otherwise can be quite tedious to read.
- List each unique host instance, so that I can easier see directly which ones might need a restart after an import.
I'd appreciate if you can come up with any more features that should be included in this script.
/Christian @ IntegrationAdmin.comFilter on send port not on the same line as the Filter tag.
This one is a nice one, I ran into it several times. Mostly after copy/paste of a port definition for a binding file, because Visual Studio is formatting after paste the XML in a way the filter will get invalid. This leads to a cryptic error
during importing the binding.
http://winterdom.com/2008/06/biztalkfiltersnotgettingimported
Jean-Paul Smit | Didago IT Consultancy
Blog |
Twitter | LinkedIn
MCTS BizTalk 2006/2010 + Certified SOA Architect
Please indicate "Mark as Answer" if this post has answered the question.
Maybe you are looking for
-
How can I startup from my hard drive instead of Darwin/BSD screen?
Hi, I have read most of the forum that was discussed regarding about the darwin/bsd screen. I still can not find the solution to solving my problem. After using the Disk Warrior disc as a startup to fix the directory, and restarting the computer. It
-
iTunes will not install on my computer (Windows 8) and i tried everything in "Issues installing iTunes or QuickTime for Windows" but nothing worked. any help?
-
How to display a waveform in XY format where X is the time in seconds?
I am aquiring voltage from a power sensor and I am displaying this voltage as a waveform in a waveform chart. Now, I would like to display this waveform such that on X axis I have a range from 0 to 30 seconds (X axis should be displayed in seconds of
-
How will i configure third party sales order
pls tell me how will i configure for third party sales order
-
it is a fresh installation but Enterprise manager is not working. URL : http://devaex01:7001/em whereas http://devaex01:7001/console works. where do i look for to trouble shoot em. oid is 11.1.2.0 and weblogic 10.3.4 Edited by: user11993859 on 8/02/2