Need to understand and review the implications of how consummables are mana

Need to understand and review the implications of how consummables are managed in SAP - both from a material issue and from a costing perspective

Hi,
Consumable materials are materials that are procured directly for an account assignment object. They are not managed on a value basis in Inventory Management.
Examples of consumable material:
Office material like paper, pan, pencil, note books etc… assigned to a cost center
For Procurement Consumable follow these steps........
1. Create CCtr Std. Hierarchy with T.Code: OKKP,
2.Create Cost Center with T.Code: KA01,
3.Create Cost Center with T.Code: KS01,
4.Assign Cost Element to Cost Center in T.Code: KS02,
5.Check Field status variant and Pstng period variant in T.Code:OBY6,
6.Create Purchase Order(ME21N) with account assignment “K” , in material text write paper, pan  and after entering details, you will get small pup up screen and enter your G/L account, what you given in creating Cost Element and ten save your purchase order.
7. Goods Receipt in : MIGO wrt to Purchase Order
8. Invoice Verification: MIRO wrt to Purchase Order
9. F-53, Payment to Vendor
Hope the above will helpful to you and reward.
With Regards,
Bijay

Similar Messages

  • Need to understand and review the implications of how consignment stock are

    Need to understand and review the implications of how consignment stock are managed in SAP - both from a material issue and from a costing perspective

    Hi,
    Consignment Stock means your Vendor stores there material in your company premises(It remains the property of the supplier until it is actually used or consumed, when ever you want you can use it for consumption as per your requirement. Unless you consumed, It is regarded as non -valuated stock.
    Goods receipts into your consignment stock with or without reference to a purchase order can be done. The vendor’s consignment price for a material must be determined before you post the goods receipt. A goods receipt to consignment stock does not change the valuated stock quantity, since the material still belongs to the vendor.
    The steps for Consignment Process are:
    1. Consignment info record(ME11),
    2.Souce List(ME01)
    3.PO with item category K( ME21N)
    4.GR WRT to PO (stock will be shown as material provided by Vendor)
    5.Consuption Posting (Creates Invoice automatically)
    6.Invoice Verification in MRKO.
    7.Payment to vendor(F-53)
    The account entries in GR,GI and IR are as follow;
    Goods Receipt:
    No Accounting Documents
    Goods Issues:
    Consumption A/C: DR,
    Consignment(Liability Account ) Payable: CR,
    Consignment Settlement:
    Consignment (Liability Account )Payable: DR,
    Vendor Account A/C: CR
    If helpful to you and then reward.
    Regards,
    Biju K

  • TS3771 I have a podcast that will not play in 64 bit iTunes. I checked the box to open in 32 bit but now I get an error stating that iTunes needs 64 bit and quits the application. How can I get iTunes 11.1.4 to open in 32 bit so i can view this podcast in

    I have checked the 32 bit box in my iTunes (Finder, iTunes.app, Get Info) so I can view a video podcast but now iTunes will not open. I get an error stating that it needs to be 64 bit and the application quits. How can I get my iTunes 11.1.4 to run in 32 bit mode so I can watch my podcasts?

    I have checked the 32 bit box in my iTunes (Finder, iTunes.app, Get Info) so I can view a video podcast but now iTunes will not open. I get an error stating that it needs to be 64 bit and the application quits. How can I get my iTunes 11.1.4 to run in 32 bit mode so I can watch my podcasts?

  • I use imovie to create videos. When I burn the video to DVD and play it back there is digital breakup in the playback from the DVD It does not shoe in p[layback on the computer. I understand there isd some file I need to delete and reboot the imovie to co

    I use imovie to create videos. When I burn the video to DVD and play it back there is digital breakup in the playback from the DVD. The digital breakup does not show in playback on the computer. I understand there is a file I need to delete and reboot the computer and imovie will rebuild the file in the program. Help!

    My method is to use the DAW in standard recording mode, and set up the camcorder entirely separately.  After recording, I automate the audio mix with fader moves and effects, then export ("bounce to disk") a full-fidelity AIFF, 16-bit 48 kHz stereo file (most videos use 48, not 44.1).  I use iMovie '11 to import the video from the camera, then import the stereo audio file and match it up to the camera audio by dragging it into the iMovie Project.  Make the waveforms visible, it's not too hard to align.
    Then, use iMovie's "Export as Quicktime" feature.  Here, by going through the menus and options, you can control the audio compression (for example, 256k instead of 128, although 128 seems to be enough for YouTube).
    AppleMan1958 posted a YouTube video about controlling iMovie's export options that may help:
    http://www.youtube.com/watch?feature=player_embedded&v=vJg-909lx2s#!

  • On our 1-employee farm (plus me), we communicate by texting - I use a 4s, can I store and review the txts on my MacBook

    On our 1-employee farm (plus me), we communicate by texting - I use a 4s, can I store and review the txts on my MacBook & iPad2?  On my iPhone?
    TIA,
    Allan

    You'd need third-party software like this:
    http://www.ecamm.com/mac/phoneview/

  • Adobe Connect 8, do you we still need to download and install the add-in

    Hi,
    In the new version of Adobe Connect 8 do you we still need to download and install the add-in on the PCs so that I can share the screen?
    If so can you give me the URL?
    Thank you
    Will the old URL still work?
    Chip

    Yes, the Adobe Connect Add-In is for Hosts and Presenters always. However, even attendees may be required to install the Add-In if the Host has used the Enhanced Audio option preference to improve VOIP audio. In that case the Attendees need the Add-In to get that functionality.
    Understand the Add-In is required because Adobe Flash Player does not have the feature set as native code. The Adobe Connect product team needs to add those features to the Flash player so Adobe Connect will have those capabilities. Maybe one day the Flash player will include those capabilities as native functions but that is a deeper discussion for another day.
    The new Adobe Connect Add-Ins were posted a few weeks ago for Adobe Connect 8 SP1 and all versions of Connect. It is recommended those be used and significant improvement has been made in the features of the Add-in. They are posted here:
    http://www.adobe.com/special/adobeconnect/migration/index.html

  • I wrongly changed my settings to the American store and now when I try to download updates for the apps my ipad 2 tells me I need to switch back to the Canadian store, how do I do that. Resident of Canada

    I wrongly changed the settings on the apps page to the American store. Now I cannot download any updates because I am locked out and need to revert back to the Canadian store, how do I do that

    Try going to the bottom of the Featured tab in the App Store app on your iPad and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select Canada.

  • The church's iMac was registered by an employee who is no longer here. We need to update the OS to Lion and much of the software. Without his password, do we need to wipe and reinstall the OS? If so, how do I do that?

    The church's iMac was registered by an employee that is no longer at the church. We would like to update the OS to Lion as well as some of the software. Since we do not know the password, is there a way to reset it it? Or do we need to wipe and reinstall the OS, register and then update? If so, how hard is it to reboot?

    OK, thanks for that. Look on the original OS X install disc and see if that say Leopard 10.5.x or Snow Leopard 10.6.x. You advised in the last post the system is running 10.6.4, which is Snow Leopard. The most up-to-date version of Snow Leopard is 10.6.8, once we get your password changed we can work on getting it up-to-date.
    So to change the administrators password  you will do the following:
    Insert the Snow Leopard Install Disc into the SuperDrive and restart the computer , when you hear the Startup Tone hold down the Option key.
    Choose the SL Install Disc
    Choose the language
    Select the Utilities Menu - Select Password Reset
    Select your Mac OS X hard disk volume.
    Select the user name of your original administrator account. (you can change this later!)
    Enter the new Password (remember to re-enter in the second box)
    Quit the app by hitting the Command - Q keys
    Quit the Installer (Command - Q again)
    Restart

  • I interrupted a software update and my macbook pro will not boot. I have tried to reboot using the startup disc, I have tried to verify the disc, and repair the disc. It tells me I need to erase and reformat the hard drive then reinstall the operating sys

    I interrupted a software update and my macbook pro will not boot. I have tried to reboot using the startup disc, I have tried to verify the disc, and repair the disc. It tells me I need to erase and reformat the hard drive then reinstall the operating system. I do not have a back up of all my applications, my garageband music and other things. I also do not have time capsule set up on this machine, but I do have a 2 TB time capsule.
    Is there anyway to back up this corrupted drive so I can restore my applications later?

    There's an old saying.  If you don't have a backup disc, then there must be nothing important to backup.  That's just lesson #1.  Lesson #2 is to never interrupt a software update.  Not a good thing.
    OK, I'm sure you know this.  It just upsets me to read your story, knowing you have a lot of important stuff on your hard drive, and didn't use time machine.
    You're pretty much in a bad place.  My only hope for you is to boot to your Installation Disc, then using disk utility see if you can save the internal hard drive (by fixing what can be fixed).  You might be able to see your user folder and some of your apps.  I wouldn't even consider copying the library, because who knows what's been corrupted in there.
    Good luck.

  • I´d like to cancel my big CC plan and switch to photo plan. I need Ohotoshop, Lightromm and Acrobat, the rest are obsolete to me

    I´d like to cancel my big CC plan and switch to photo plan. I need Ohotoshop, Lightromm and Acrobat, the rest are obsolete to me

    Hi Tore,
    You can follow the article: Cancel your membership or subscription | Creative Cloud to cancel your subscription.
    Let us know if you still need any help with that.
    Thanks,
    Ratandeep Arora

  • On my Ipad I seem to be having a problem when trying to play YouTube videos embedded on Facebook.   When I click the links, I get a message saying: "Flash Player upgrade required."   and under it, it says, "You need to download and install the lastes vers

    On my Ipad I seem to be having a problem when trying to play YouTube videos embedded on Facebook.
    When I click the links, I get a message saying: "Flash Player upgrade required."
    and under it, it says, "You need to download and install the lastes version of Adobe Flash Player to view this content"
    and also a green button saying "Get Flash Player"
    I get this if using chrome or safari .
      I can go direct to YouTube it just works.

    The Facebook link to the video is accessing an Adobe Flash video.  Unfortunately, no iOS devices can play flash. 

  • I am getting a message that my iphoto library cannot be opened because I mades changes to my photos in a newer version of iphoto and I need to quit and use the newest version of iPhoto.  but i cannot update it and or access my photos.  Help.  thanks.

    I am getting a message that my iphoto library cannot be opened because I mades changes to my photos in a newer version of iphoto and I need to quit and use the newest version of iPhoto.  but in update, it says i have no updates.   i dont even remember making changes in iphoto.Help.  thanks.

    What version of iPhoto? Assuming 09 or later...
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 
    Regards
    TD 

  • I am new to the ethernet communicat​ion using labview. I do not have any hardware. I have two laptop i need to send and recieve the data via these 2 laptop using labview. Kindly help me on this.

    i am new to the ethernet communication using labview. I do not have any hardware. I have two laptop i need to send and recieve the data via these 2 laptop using labview. Kindly help me on this.
    Solved!
    Go to Solution.

    Hi thanks for the help.
    Actually i am trying to send 10 sine signals from server pc to client pc. So i will bundle 10 signals in server pc and send it and in client pc i am unbundling it and need to save in TDMS format.
    Till unbundling i was able to do. TDMS format it is saving only last value. I need to save all the values. Kindly help me on same. I am attaching both the VI.
    Attachments:
    Client.vi ‏62 KB
    Server.vi ‏252 KB

  • I have been trying to watch tutorials on how layering works. All I want to do is this: I have one image of a radio with a white background. I need to have just the radio extracted, then on a new layer (white one/blank/plain) I need to copy and paste the i

    I have been trying to watch tutorials on how layering works. All I want to do is this: I have one image of a radio with a white background. I need to have just the radio extracted, then on a new layer (white one/blank/plain) I need to copy and paste the image of the radio two times. How can I DO THIS!?!?!?! Thanks!

    In Editor, go to the expert tab.
    Open picture B, the one you wish to select the radio from to add to another picture.
    Use one of the selection tools, e.g. selection brush, lasso tool, to select the object. You will see an outline ("marching ants") once the selection is complete
    Go to Edit menu>copy to copy the selection to the clipboard
    Open picture A, then go to Edit>paste
    Use the move tool to position object from picture B.
    In the layers palette you should see picture A as the background layer, and the radio B on a separate layer.

  • I have been experiencing periodic loss of touch screen response with my iPhone 6 when in landscape mode. Flipping to portrait then back to landscape usually corrects it, but at times I need to close and reenter the app.

    I have been experiencing periodic loss of touch screen response with my iPhone 6 when in landscape mode. Flipping to portrait then back to landscape usually corrects it, but at times I need to close and reenter the app.

    Hi McGannahanSkjellyfetti,
    If you are experiencing difficulties with touchscreen response on your iPhone I would suggest that you troubleshoot using the steps in this article - 
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

Maybe you are looking for

  • Formatting the text in a cell

    Hello Experts, I have a word doc in where it is having a bullet list format. I do not need to have actual bullets in the webi doc, I am replacing the bullet with an "*", and the sub-bullet with an "-". I have tried to play around with all of the diff

  • Once again World of Warcraft crazy latency..10k+

    Hey guys, Having some problems again with my bb speed etc today.. Connections been dropping all day as its raining (might have nothing to do with it but you never know) and now doing any speed tests shows my speed a 0.33mbs Anyway im getting huge lat

  • Select list within interactive report.

    Hello y'all, I have a need to develop an interactive report and am lost in how to proceed. I am asking for your help. The report requirements are as such: - There are 3 types of records that will be in the report - The is a checkbox to associate the

  • Bug (LabVIEW 2011 sp1 crash)

    Bug (LabVIEW 2011 sp1 crash) 1) Open LabVIEW 2) Blank VI 3) Front Panel / View / Class Browser follow exactly this : Class Browser / Object library ---> select "LabVIEW Classes" ---> and then clic "Search" result : The window "Class Browser Search" o

  • 1 10.6 MacMini Server + 78 10.5 XServe G5s

    Hello I have 78 Dual 2.0GHZ G5 Xserves which will be running OS X Server 10.5.7 I have a 6TB XServe RAID I also have a brand new Apple MacMini Server (Intel) running OS X Server 10.6.x I am hoping to take content produced in Final Cut Studio 3 (runni