Need to understand Complete Flow of FI

Hi,
I am an ABAPer worked for FICO modules for couple of projects, I need to understand complete flow of FI in SAP I want to know more depth [Practically] not just definition of some of the components of FI.
Please give me some useful links to start with FI.
Thanks
sudharshan

As I am with Techincal Background I am interested in knowing Functional responsibilities of FI, So i need to start from scratch of FI please do send me the documents where I can understand the concept not just the definition.
Thanks
Sudharshan

Similar Messages

Need to Understand the Packet Flow

Dear Friend,
I need to understand the packet flow of the below diagram.
I have configured MPLS on R2,R3 and R4. And IBGP is configured on R2 and R4. Now I am able to reach from R1 to R5's Loopback address. I need to understand the packect flow from R1 to R5 like If I ping from R1's Loopback to R5's Loopback address then Source IP is 1.1.1.1 and destination IP is 5.5.5.5. What will be the packet structure at R2, R3,R4...??????????
Please explain in details......Me really confused as R4 has not route about 5.5.5.5 also 1.1.1.1...How it forwards the packets??????

Sanjib
So R2 and R4 are PE devices and R3 is a P device ? And you are not doing MPLS VPNs, just normal MPLS ?
If so R4 must have a route to 5.5.5.5. Did you mean R3 does not have a route ?
With MPLS any P device only knows how to get to other P devices and PE devices. It does not know about any networks outside the MPLS network. The PE devices have routes to any external networks connected to them and know how to get to P and other PE devices.
Note that in terms of PE/P reachability the routing/LDP information has already been exchanged and an MPLS forwarding table built. So for reachability between PE/P routers (ie. not outside the MPLS network) route lookup do not need to be performed, it is simply a matter of removing and adding labels.
So assuming you are not using MPLS VPNs and that MPLS labels have been exchanged between all P and PE routers -
R1 pings 5.5.5.5
1) R1 does a route lookup for 5.5.5.5 and sends it to R2.
2) R2 is a PE device. It does a route lookup for 5.5.5.5 and sees R4 as the next hop (this route has been exchanged via MP-BGP).
3) R2 then need to send the packet to R4. To do this it looks in it's MPLS forwarding table to see how to get to R4. The MPLS forwarding table tells it which label to attach to the packet. It adds this label and sends the packet out of it's interface to R3.
3) R3 is a P device. It does not need to do a route lookup for 5.5.5.5. It simply looks at the incoming MPLS label and consults it's MPLS forwarding table. It will have an entry in it's table saying that an incoming packet with an MPLS label of x should be sent out with an MPLS label of y. It changes the label and sends it out to R4.
4) R4 receives the packet, removes the label, does an IP lookup for 5.5.5.5 and sends it to R5.
Note that actually R3 might not add a label as there is something called Penultimate Hop Popping where if the net hop from the P router is a PE router it sends the packet without a label to save extra processing on the PE router. If you had multiple P routers only the last P router before the PE router would do PHP.
The key thing to understand is that the P devices don't do route lookups when forwarding data. They simply switch labels. Whereas the PE devices do need to do route lookups for destinations outside the MPLS network.
Jon

What's is the best way to use iPhoto? I need to understand.

What's is the best way to use iPhoto? I need to understand.
I guess the iPhoto is only for people with 5,000 of personal photos.
Or even 200,000, but they can't use this app everyday.
I'm not talk about working as a photographer. They use Aperture.
They may use iPhoto like a family album that you take a look sometimes.
And don't care about putting photos from the camera or from internet everyday.
I have tons of music and I love iTunes 8, works great. So I tried but I can't stand iPhoto anymore.
I have over 173,000 photos. My goal is organize, have total control, crop in Preview and delete them fast as I can.
The iPhoto is too slow. And is not only about performance, more RAM... but the whole concept.
Finder is much better/richer/flexible to organize than iPhoto.
I'm not talking about the photographer workflow.
And I'm not talking about editing and all these great photo features, the search, and all the iLife environment. They are amazing.
When I'm iPhoto, I feel like a prisioner.
I can't open an album/folder/event alone just to take a look, without do lanch the iPhoto app with the all thousand photos together. And it's slow.
I can't use Quick Look there.
So, I'll use Finder for manage/crop/etc. But what's the best way to use iPhoto in my case? Put the best/key ones there to use in iLife/MobileMe? To do a more serious editing? I like the features: keywords/ratings/hidden photos/events... It would be cool this features in Finder.
For example:
iMovie: Manage movies? NO. It's editng only.
iTunes: Manage music/small video/podcast...? OK. Editing the song? OK for tags/convert/artwork/equalizer... For music there's a GarageBand of course.
iPhoto: Manage photos? Yes and No.
I think Finder would kill iPhoto incoporating all the editing features in Preview and the rich manage in Finder.
Jobs said that no one care about iDVD anymore. They care about the web.
Using iMovie to export to MobileMe.
Maybe iPhoto become less important in a near future. With a better Finder+Preview Right?
Sorry for this long text with a short question.
Thanks.

Your post demonstrates exactly why I keep saying that iPhoto is not the application for you.
It would be better an iPhoto organizing photos by words like when iTunes browse his music.
Why on earth would anyone want to organise photos by words? A list mode is entirely pointless in a Photo application. That's like having an old photo album organised with the photos facing inwards so you can read the back of the picture.
Again, this is a characteristic of a File browser. You don't want a Photo organiser, you want a file organiser.
And, in iPhoto, you can search by tags, effortlessly in either the search box or by using a Smart Album.
iPhoto always loads all that events and all the thumbs library to scroll, and I think it's overkill.
So, how is iPhoto to know which ones you want to work with today? Open a library, get the Library.
Would be better a Cover Flow option to browsing in Events.
You've obviously never tried scrubbing along the Event icon.
Imagine iTunes using Cover Flow mode all the time. It won't be too useful.
Many, many people do, including myself on a library of 20k tracks totalling more that 100 gigs, and find it very useful. Same with the Finder.
And if when iTunes Store starts to sell photos?
Why on earth would the iTunes store start to sell photos?
My photos are not junk,
I didn't say there were. Read my post again.
When I said Finder to crop photos I mean Preview. But I feel in Finder. Because what's in Preview? A photo opened with a Preview's menubar and some cocoa APIs like adjustments. Not?
Oh, so you don't count Preview as an application. Fine. It is an application but you don't feel it. As you wish.
My point to you is very simple: Because of the way you want to organise your pics - using lists views and so on - iPhoto is not the application for you. Don't use it. But you keep writing things about the application that are untrue, and I'm aware that other folks search these forums and I don't want them to have inaccurate information about iPhoto.
Regards
TD

I need help understanding how the Apple components integrate to create a system across all my devices?

I need help understanding how the Apple components connect to create a whole system across all my devices?
Is there a resource that describes current system and associated functionality?
For example:
Buy A, B, C to achieve "X"
You will need:
an internet provider which supports <specs>
add D to achieve "Y"
You will need:
an internet provider which supports <specs>
add "E" to achieve "Z"
You will need:
an internet provider which supports <specs>
For example, I am looking at the Gen 6 Airport extreme. For intended performance do I need broadband? if so what are the specs, or will basic internet service suffice? Do I need the internet provider's modem or does the Airport extreme replace that? And then I think, if I am doing this, I should also look at Apple TV....What do I need and Why? Then I look at the New Desk top coming out in the fall, and I think well, if I wait and get this, what does this component do for the system, and what becomes redundant? What does this awesome desktop do for my ability to sit and use a new macbook air when I travel or sit on the couch in my PJs?
If there was a place that plainly stated "if you buy the new dektop you can configure a system including only these components and achieve <this result> and by adding <additional components> you will achieve this result.
I have been to the genius store a few times, but I come out of there more confused unless I have SPECIFIC questions or already know what to buy.
A "System Configuration App" would be a really great sales tool--Just saying.

I have no idea what "fully optimized" means.
No Apple device will let you watch broadcast TV. The Apple TV is a good option for watching streaming TV from iTunes, NetFlix and Hulu. If you want to watch from other sources, you may need to look at other devices.
Any Mac computer or iPad will allow you to surf the web.
What business software?
Time Capsule is a good option for back ups.
Update what across all devices?
For accessing documents from all devices, a service like Dropbox is your best bet.
I have no idea what "step as far away from an internet provider as possible" means. If you want Internet access, you need an Internet provider.
Lighting fast speed for what? Processor? The specs are listed for all devices in the Online Store. Internet? We're back to the service provider.
Technology changes. The only way to keep pace with it beyond a couple of years is to buy new stuff.
The bottom line is you need to look at the specs for devices availble and at your budget and decide what best meets your needs. If you are unable to do that on your own, there are lot of technology consultants out there who will, for a fee, look at your exact situation, make recommendations and even handle the purchase and set up. Perhaps that would be the best route for you.
Best of luck.

Need help with completion and debugging...please

import java.io.*;
public class DeleteSpaces3
     public static void main (String[] args)
          FileReader inputFile = new File("Omerta.txt");
          FileReader outputFile = new File("omertaEdited.txt");
          FileReader in = new FileReader(inputFile);
          FileWriter out = new FileWriter(outputFile);
     public static void Spaces()
     try
          BufferedReader in = new BufferedReader(new FileReader("Omerta.txt"));
          BufferedWriter out = new BufferedWriter(new FileWriter("OmertaEdited.txt"));
          String str;
     while ((str=in.readLine()) != null)
          while(line.indexOf(" ") > -1)
               line = line.replaceAll(" ", " ");
               out.println(line);
     in.close();
     out.close();
          catch (IOException e)
          System.err.println(e);
          System.exit(1);
     thats my code and the program is supposed to open a text file called "Omerta" and edit it so that it takes out all the double spaces between the words in the text file...ive been told that this should work.......yet i still am unsucessful in compiling the code....all help will be greatfully appreciated

ive been told that this should workThe replies to your earlier posting here:
http://forum.java.sun.com/thread.jspa?threadID=573173&messageID=2844611#2844611
did not tell you that, they told you what was wrong - and is still wrong. And, in addition, you have introduced another error in your curly braces.
You need to understand how to construct a Java class; see this tutorial:
http://java.sun.com/docs/books/tutorial/java/javaOO/classes.html

Help required in understanding the flow of control in working with EJB 3.0

*1. Can anyone help me in understanding the flow after getting an object of InitialContext in using Stateless/Stateful in EJB 3.0 from client i.e. what we are getting in the step Object ref=jndiContext.lookup("CalculateBean/Remote) .*
*2. What is the use of INITIAL_CONTEXT_FACTORY*
*3. PROVIDER_URL*
*4. Java.naimg.factory.url.pkgs*
*5. why org.jboss.naming and org.jnp.interfaces separated by semi colon.*
*6. Why we dont require INITIAL_CONTEXT_FACTORY, PROVIDER_URL and Java.naming.factory.url.pkgs if the client is a web client.*
Properties p=new Properties();
          p.put(Context.INITIAL_CONTEXT_FACTORY, "org.jnp.interfaces.NamingContextFactory");
          p.put(Context.PROVIDER_URL,"jnp://localhost:1099");
          p.put("java.naming.factory.url.pkgs","org.jboss.naming:org.jnp.interfaces");
          Context jndiContext = new InitialContext(p);
     Object ref = jndiContext.lookup("CalculateBean/Remote");
Calculate c = (Calculate)ref;
int sum=c.add(3,4);
System.out.println(sum);
Thanx in advance........

Annotations can also be processed at run time using the core reflection API (java.lang.Class & java.lang.reflect.*), so you might want to explore down that path. I have no idea how JBoss actually does it, but annotation processing at build time and core reflection at runtime are the two most obvious possibilities.
Bruce

I need to understand better, what can be done with sync and what cannot

i setup 2 windows boxes + 2 linux boxes to sync and got a mess in less than a day. apparently, i do not understand, what it does/should do, and what not.
As one having done work in distributed environments, namely in database replication scenarios, i understand, there have to be limitations, especially, as all of my 4 boxes are running most of the time.
next, i found, that copying profiles wouldnt have worked either, as the windows boxes (have to) use different add-ons/plugins compared to linux (like fireshot - to give a simple example - needed a replacement on linux). - So just moving profiles doesnt help. But the promise to catch open windows/tabs, history, and so forth doesnt seem to work either. Maybe TabMixPlus is killing the whole mechanism?
I found very detailed documentation on where to click to get it all started, but nothing about the internals nor limitations, thus being very disappointed now to find sync actually NOT working at all.
Furthermore, while setting up the whole thing, every machine had a "sync setting" as to how to use that one machine: initial distribution/sync/receiver only/and so forth. Does this only concern the initial setup? - I wasnt able to see this configuration option ever again to be able to change it after the initial setup had been done.
So i obviously need to understand better... as to me it looks like some real messy replication scenario, with not all backends sharing the same tables. And apparently adding/removing add-ons needs to get replicated manually anyway.
What time delay do i have to expect? When shall i use "Syncronize" manually? And so on...
I mean: I trusted Mozilla solution more than any other one, but it doesnt seem to live up to my expectations.
(sorry: i had to reenter the whole thing after my email address ran out)

Ok then! Thanks for answering! Can you still transfer music over? I can't even get that to work! I have set my nephews up with no problem..obviously not a sec generation... please help again!

Need to understand how the PGI date is being calculated

Hi,
Need to understand how the PGI date is being calculated.
Does the PGI date get recalculated if the cusotme delivery date is changed.
Thanks,
Raki

Hi,
Thanks for the information and please let us know is there any calculation logic exist for that?
I have changed delivery date in the sales order and based on that-
- Transportation planning/material availability/loading/schedule line and confirmed quantity date was chaged.
Is this the - GI date - Transist time= PGI?
Thanks,

I have created a form which needs to be completed once a week for 6 weeks. On completing week 1, weeks 2 - 6 are completed at the same time with week 1 information. please help?

I have created a form which needs to be completed once a week for 6 weeks. On completing week 1, weeks 2 - 6 are completed at the same time with week 1 information. please help?

Hello, thanks for replying.
Yes they just copy to the next page, the fields are the same. The document is an observation to school lessons so it needs to be consistent but with different data on.

Is my understanding of 'flow of message in XI' is correct ?

Hi Xi Experts
 Pl..crarify my understanding on XI full flow of message !
If Adapter present : steps
 1) Normal file will be converted as SOAP XML by using adapter
 2) Adaper will send this SOAP XML message to ICM
 3) ICM will convert the message into XI specific message and send to
 IS?
 4) All pipe line steps
 5) Then it will reach the target
In case of HTTP Protocal:(SOAP)
 1) Here no adapter is required and source message will be converted as
 SOAP XML and sent to directly to ICM(Using plain Adapter)
 3) ICM will convert the message into XI specific message and send to
 IS?
 4) All pipe line steps
 5) Then it will reach the target
In case of IDOC SAP Sender:
 1) Here no adapter is required and source message will be converted as
 SOAP XML and sent to directly to ICM(Using ABAP Engine)
 3) ICM will convert the message into XI specific message and send to
 IS ?
 4) All pipe line steps
 5) Then it will reach the target
In Case of Proxies:
 By using ABAP/JAVA proxies we can create XI Specific XML and send to
 IS directly
This is my understanding after that pipe line
 RD,ID,Mapping, Receiver adapter, Target syatem
Pl... Correct me any where wrong in my understanding of Flow
Thanks for spending your valuable time on my query
Regards
Kiran LVS

Hi,
>> In case of IDOC SAP Sender:
1) Here no adapter is required and source message will be converted as
SOAP XML and sent to directly to ICM(Using ABAP Engine)
Since the IDOC Adapter is ABAP stack The message is sent directly to IE.
When a source message reaches the Integration server
the messages under goes this
a) Receiver Determination:
This steps determines the system that participates in the exchange of the message.
b) Interface Detremination:
For each receiver determine which interface will should receieve the message.
c) Message Split:
If more than one receievers are found, XI will instantiate new message for each receiver.
d) Message Mapping:
Mapping to transform the source message to destination message format.
e) Technical Routing:
Bind a specific destination and protocol to the message.
f) Call outbound Adapter:
Send the transformed message to the adapter or a proxy.
Regards
Agasthuri Doss

Understanding message flow in XI

Hi,
In Understanding message flow in XI /people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi
1. What is API and SPI.
2. In return diagram What is the functionality of "servlet"

Hello Anil,
An application programming interface (API) is a source code interface that a computer system or program library provides to support requests for services to be made of it by a computer program. An API differs from an application binary interface in that it is specified in terms of a programming language that can be compiled when an application is built, rather than an explicit low level description of how data is laid out in memory.
The software that provides the functionality described by an API is said to be an implementation of the API. The API itself is abstract, in that it specifies an interface and does not get involved with implementation details.
Two well known APIs are the Single UNIX Specification and the Microsoft Windows API.
An API is often a part of a software development kit (SDK).
The term API is used in two related senses:
A coherent interface consisting of several classes or several sets of related functions or procedures.
A single entry point such as a method, function or procedure.
SPI : Security Parameters Index

Partition ERROR - 1023040 - msg from remote site : need to understand

hi,
I currently have a problem with the partitions between two cubes.
Architecture:
      80 countries database (source)
      1 world database (destination)
Process :
- The partitions are created dynamically by maxl scripts :
spool on to $1;
Alter application $2 comment '**_batch_**';
Alter application $4 comment '**_batch_**';
Alter system load application $2;
Alter system load application $4;
Alter application $2 disable startup;
Alter application $4 disable startup;
Alter application $2 disable connects;
Alter application $4 disable connects;
/* Create Transparant Partition between Country cube to Mond cube */
create or replace replicated partition $2.$3
AREA
'"S_R_N",
&curr_month,
&local_currency, "D_EURO",
@IDESCENDANTS("P_Produit"),
@LEVMBRS("M_Marche",1),"M_Marche",
@IDESCENDANTS("B_Marque"),
@IDESCENDANTS("U_Sourcing"),
@REMOVE (@DESCENDANTS("I_Masse"), @LIST ("I_55CCOM")), @DESCENDANTS("I_Divers"),
@IDESCENDANTS("NA_Nature"),MCX'
to $4.$5
AREA
'"S_R_N",
&curr_month,
"D_DEV", "D_EUR",
@IDESCENDANTS("P_Produit"),
@LEVMBRS("M_MixClient",0),"M_MixClient",
@IDESCENDANTS("B_Marque"),
@IDESCENDANTS("U_Sourcing"),
@REMOVE (@DESCENDANTS("I_Masse"), @LIST ("I_55CCOM")), @DESCENDANTS("I_Divers"),
@IDESCENDANTS("NA_Nature"),MCX,
&country_name'
mapped globally ('',D_$7, "D_EURO", "M_Marche") to (W_$6,D_DEV, "D_EUR", "M_MixClient")
refresh replicated partition $2.$3 to $4.$5 all data;
drop replicated partition $2.$3 to $4.$5;
Alter application $2 enable startup;
Alter application $4 enable startup;
Alter application $2 enable connects;
Alter application $4 enable connects;
Alter application $2 comment '**_enable_**';
Alter application $4 comment '**_enable_**';
Alter system unload application $2;
Alter system unload application $4;
Spool off;
Logout;
exit;
- Defragmentation cubes, launch replications countries successively one by one to the world cubes sequentially .
the order of the country is not the same from one month to another .
Treatment is initiated each month.
Symptoms :
- Partition fall into error with the following message but not systematically .
message:
MAXL > refresh replicated partition PGC_ESP.Pgc_esp PGC_MOND.Pgc_mond to all data ;
   ERROR - 1023040 - msg from remote site [ [ Wed Nov. 29 10:21:03 2013] hprx1302/PGC_MOND/Pgc_mond/PGC_ADMIN/Error ( 1023040 ) msg from remote site [ [ Wed Nov. 29 10:21:02 2013] hprx1302 / PGC_ESP / Pgc_esp / PGC_ADMIN / Error (1023040) msg from remote site [ [ Wed Nov. 29 10:21:01 2013] hprx1302/PGC_MOND/Pgc_mond/PGC_ADMIN/Error ( 1042012 ) Network error [ 32] : Can not Send Data ]]] .
We note that the error occurs in the following cases:
- The errerur happens generally when the average clustering ratio is low. (cube fragmented) for cubes source and / or destination
- When beacuoup replication were done before: in the last 10 to 15 cubic remaining replicate.
- We mistake once on the environment recipe on the first cube with average clustering ratio to 0.96 but the server recipe is much less efficient.
We noticed that when doing a defragmentation cubes source and destination once the error obtained treatment replication was no longer falling into error.
Problem: defragmentation cube world take 10 hours.
We also made the following observation:
OK/INFO - 1051034 - Logging in user [PGC_ADMIN].
OK/INFO - 1051035 - Last login on Friday, November 29, 2013 10:19:46 AM.
OK/INFO - 1053012 - Object [Pgc_esp] is locked by user [PGC_ADMIN].
OK/INFO - 1053012 - Object [Pgc_mond] is locked by user [PGC_ADMIN].
OK/INFO - 1053012 - Object [54116855] is locked by user [PGC_ADMIN].
OK/INFO - 1053012 - Object [39843334] is locked by user [PGC_ADMIN].
OK/INFO - 1053013 - Object [54116855] unlocked by user [PGC_ADMIN].
OK/INFO - 1053013 - Object [39843334] unlocked by user [PGC_ADMIN].
WARNING - 1241137 - [Target] - Partition definition is not valid: [Cell count mismatch: [1279464568200] area for slice [1] members per dimension [63 1 2 1 6 26 7 245 1 37955 ]].
OK/INFO - 1053012 - Object [25586652] is locked by user [PGC_ADMIN].
OK/INFO - 1053012 - Object [11329970] is locked by user [PGC_ADMIN].
OK/INFO - 1053013 - Object [25586652] unlocked by user [PGC_ADMIN].
OK/INFO - 1053013 - Object [11329970] unlocked by user [PGC_ADMIN].
WARNING - 1241137 - [Source] - Partition definition is not valid: [Cell count mismatch: [47895484140] area for slice [1] members per dimension [63 1 6 7 2173 2 17 1 245 ]].
OK/INFO - 1053013 - Object [Pgc_esp] unlocked by user [PGC_ADMIN].
OK/INFO - 1053013 - Object [Pgc_mond] unlocked by user [PGC_ADMIN].
OK/INFO - 1051037 - Logging out user [PGC_ADMIN], active for 0 minutes.
OK/INFO - 1241124 - Partition replaced.
Following these findings we need to understand what is happening.
We would like to understand why partitons fall errors?
why we have the message "Partition definition is not valid" in the logs when creating the partition?
Regards,
Oliv.

Hi SreekumarHariharan,
Tx to your anwers, but we are already try all the solution proposes to Essbase FAQ.
a)Increase the values for NETDELAY and NETRETRYCOUNT in essbase.cfg file.Restart the essbase server.
We are changed the two value in the essbase.cfg but nothing to do. The same error appears
b)Make sure that the all source members and target members used in partition are in sync
All member are diferent between source and target but a mapping are defined in the partition (see the partition maxl in my below message.
c)Validate the partition (look at the validation tab, it will give the numbers for each side of the partition ie source area and target area)
You can see the logs of validation partition :
WARNING - 1241137 - [Target] - Partition definition is not valid: [Cell count mismatch: [1279464568200] area for slice [1] members per dimension [63 1 2 1 6 26 7 245 1 37955 ]].
OK/INFO - 1053012 - Object [25586652] is locked by user [PGC_ADMIN].
OK/INFO - 1053012 - Object [11329970] is locked by user [PGC_ADMIN].
OK/INFO - 1053013 - Object [25586652] unlocked by user [PGC_ADMIN].
OK/INFO - 1053013 - Object [11329970] unlocked by user [PGC_ADMIN].
WARNING - 1241137 - [Source] - Partition definition is not valid: [Cell count mismatch: [47895484140] area for slice [1] members per dimension [63 1 6 7 2173 2 17 1 245 ]].
OK/INFO - 1053013 - Object [Pgc_esp] unlocked by user [PGC_ADMIN].
OK/INFO - 1053013 - Object [Pgc_mond] unlocked by user [PGC_ADMIN].
OK/INFO - 1051037 - Logging out user [PGC_ADMIN], active for 0 minutes.
OK/INFO - 1241124 - Partition replaced.
d)Rerun the Partition script again
The same error appears.
Tx to your help.
Regards,
Oliv.

Re:- SAP GUI - Need to understand what is installed as part of GUI

Dear experts,
I need to understand what is installed as part of the SAP - GUI installation for windows like what are all the ocx/ dlls installed, ini files, changes in services files and change in registry things like that.
Does any one has the details. Please help
Warm Regards

Hi,
Please check this links.
This might solve your queries.
http://www.oit.duke.edu/techsupport/sap/sapgui/win/index.html
http://web.mit.edu/sapr3/sw_dist/winstruct.html
http://info.cba.ksu.edu/mchaney/sap.doc
Please reward if useful
Thanks.

I need To Understand the "Type Cast Function"

Dears,
I need To Understand How the "Type Cast Function" Work, and if you can Give me an Example it will be Apperciated
BR
Ahmed

In its simplest explanation Type Cast allows you to reinterpret a series of bytes. The numeric conversion functions convert from one data type to another and essentially do the same thing that Type Cast does, albeit with just numbers. Type Cast allows you to extend this to convert one data type to another, beyond just numbers. Thus, you could convert an array of 2 U8 values into a single U16 number by using Type Cast like this:
or you could reinterpret an array of lots of U8 values into an array of U16 values like this:
How you use it is entirely up to you, but it is an extremely powerful function. What are you trying to do?
Attachments:
Example_VI.png ‏6 KB
Example2_VI.png ‏11 KB

Documents related to SUP complete flow(Device to Server and Vice versa).

Hi,
Iam using SUP 2.1 ESD#1 licensed version, Please send some documents related to SUP complete flow(Device to Server and Vice versa.
Thanks,
B.Ushasri

Hi Ushasri,
I assume you are aware that SUP2.1.x offers you two kind of functionality.
1. Typical SUP (Using MBOs) functionality.
2. Online data proxy (ODP) -- For online application using REST services.
You can find the complete 2.1ESD1 documentation @ http://infocenter.sybase.com/help/index.jsp?topic=/com.sybase.infocenter.pubs.docset-SUP-2.1.1/doc/html/title.html
However if you looking to start with ODP functionality you can refer to below doc as well.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/607b76a7-c345-2f10-d5b3-f236ea676cb1
Regards
Rohith

Need to understand Complete Flow of FI

Similar Messages

Maybe you are looking for