Need to understand why I had to remove / re-add the alias

I have a asa5520-k8 with 7.2(4) that I found an NAT that was missing but before I can enter it I had run two commands below in order to enter it and I need to understand why if the xlate entry did not exist..
no alias (inside) 10.120.208.26 172.27.208.26 255.255.255.255
alias (inside) 10.120.208.26 172.27.208.26 255.255.255.255

Sorry the alias (inside) 10.120.208.26 172.27.208.26 255.255.255.255 did exist but I noticed that it was not working and to fix it I had to run the two commands to get the NAT to work again .. Need to know if this is a bug or correct way to fix a translation issue...

Similar Messages

I don't understand why they ask for payment for all the applications labelled free. Regards

I don't understand why they ask for payment for all the applications labelled free. Regards

How to Get Apps From the App Store Without a Credit Card
http://ipadhelp.com/ipad-help/how-to-get-free-apps-from-the-app-store-without-a- credit-card/
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
http://support.apple.com/kb/ht2534
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/ts5366
If None is not available - On your computer launch iTunes and click “iTunes Store” in the left navigation pane. Click the “down arrow” next to your name at the top right side of the page and click “Account.” Enter your username and password and click “View Account” to log into your account information. Next to your Payment Type, click “Edit.” Select the “None” button and click “Done.” Confirm that your card has been removed by returning to the Apple account information screen. Under Payment Type, it should say that there is no credit card on file.
iTunes Store: Changing your payment information
http://support.apple.com/kb/HT1918
iTunes Store Accepted Forms of Payment
http://support.apple.com/kb/HT5552
 Cheers, Tom

I recently downloade Firefox v6.0 but had to remove it via the Control Panel Add/Remove Program. When I tried to re-install it I keep getting an error messsage that said that I had to reboot to fully remove the previous copy of v6.0.

I recently downloade Firefox v6.0 but had to remove it via the Control Panel>Add/Remove Program. When I downloaded v6.0 again and tried to re-install it I keep getting an error messsage that said that I had to reboot to fully remove the previous copyof v6.0. However when I did reboot I get the same error message. I'm sort of stuck in a loop and can't figure out how I can re-install v6.0. I am running Windows XP on a Dell Inspiron 9300 laptop.

Please do the following.
Click '''Help '''| '''Check For Updates'''. The option to update should appear and version 3.6.17 should download and install.
However, sometimes things go pear-shaped and you get version 3.5.19. If that happens, repeat the same steps to update to 3.6.17.
Once you have 3.6.17 installed, you'll get the opportunity to update to the current version which is 4.0.1 ''Please don't do that for the moment because you first of all have to update your plugins''. To do the latter, please do the following.
Go to http://www.java.com/en/ and install the latest version of Java.
Update Adobe Shockwave for Director via http://get.adobe.com/shockwave/
Update Adobe Flash via http://get.adobe.com/flashplayer/
Update Adobe Reader via http://get.adobe.com/reader/?promoid=BUIGO
For security details regarding the Adobe updates, see: http://www.adobe.com/support/security/advisories/apsa11-02.html
Once you've updated all those, go to '''Help '''| '''Check For Updates '''again to update to version 4.0.1

My adobe Creative Suite says it expired. I do not understand why it says this when I purchased the entire suite at full priced version, not a monthly basis. please to advise whats going on?

My adobe Creative Suite says it expired. I do not understand why it says this when I purchased the entire suite at full priced edition, not a monthly basis edition. please to advise whats going on?

Sanjay,
I believe you should have a chat here,
Serial number and activation support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html
or here,
Adobe ID and registration support (non-CC)
http://helpx.adobe.com/x-productkb/global/service-c1.html

I had a problem with slowness so I used "reset". The popup ran forever so I stopped it. Now I can't remove or add the program.

I had a problem with slowness so I used "reset". The popup ran forever so I stopped it. Now I can't use, remove, or add the program. How do I proceed?
TIA,
BWSwede

You can paste that path in the command line in the Windows Explorer file manager.

I don't understand why I can't download for free the apps designed by Apple, such as Pages and Numbers, which are free with iOS 7. Can anyone help me?

I don't understand why I can't download for free the apps designed by Apple, such as Pages and Numbers, which are free with iOS 7. Can anyone help me?

The apps are free with iOS 7 if you purchased a new device after September 2013. The apps do not come free just because you are running iOS 7 now. Did you purchase or receive a new iPad recently?
If you did, are you using the same Apple ID to get the apps that you used to activate the iPad? If you are, sign out of your ID, restart your iPad, sign in again and go back to the App Syore and see if the apps show up as free.
Settings>iTunes & App Store>tap your ID and sign out. Restart the iPad and go back to the settings and sign in again.

Received a mail delivery subsystem email - need help understanding why?

I sent an email to two groups...total quantity of people was 32 recipients. I received the following email. It references this...Chair Contacts"@mailpod.hostingplatform.com...which I have no recipient with this email string. I can't tell if all the emails were rejected or not, nor do I understand why this continues to happen. Can you please assist?
Emma
The original message was received at Sat, 6 Sep 2014 01:17:44 -0400
from [10.30.71.79]
*** ATTENTION ***
This email is being returned to you because the remote server would not
or could not accept the message. The registeredsite servers are just
reporting to you what happened and are not the source of the problem.
The address which was undeliverable is in the section labeled:
"----- The following addresses had permanent fatal errors -----".
The reason your mail is being returned to you is in the section labeled:
"----- Transcript of Session Follows -----".
This section describes the specific reason your e-mail could not be
delivered.
Please direct further questions regarding this message to your e-mail
administrator.
--Registeredsite Postmaster
----- The following addresses had permanent fatal errors -----
<"Chair Contacts"@mailpod.hostingplatform.com>
(reason: 554 5.4.6 Too many hops)
----- Transcript of session follows -----
554 5.4.6 Too many hops 36 (35 max): from <[email protected]> via localhost, to <"Chair Contacts"@mailpod.hostingplatform.com>
Reporting-MTA: dns; atl4mhob05.myregisteredsite.com
Arrival-Date: Sat, 6 Sep 2014 01:17:44 -0400
Final-Recipient: RFC822; "Chair Contacts"@mailpod.hostingplatform.com
Action: failed
Status: 5.4.6
Diagnostic-Code: SMTP; 554 5.4.6 Too many hops
Last-Attempt-Date: Sat, 6 Sep 2014 01:21:09 -0400

This indicates the email alias you are sending the message to has some sort of redirection or other loop problem which makes it bounce. Contact the systems / email admin / support at mailpod.hostingplatform.com to troubleshoot it.
There is also a bug in Thunderbird 31.1, this may be related.
It's [https://bugzilla.mozilla.org/show_bug.cgi?id=1060901 Bug #1060901]. If you have an account on Bugzilla, please consider voting for that issue.
Several other people have sent in similar support requests to yours, noting this happened after they upgraded to version 31.1.
The exact error message is: XXXX is not a valid e-mail address because it is not of the form user@host. You must correct it before sending the e-mail.
'''This happens in Thunderbird 31.1.0 when your mailing list description includes several words separated by spaces.'''
Although not ideal, these workarounds should let you use your mailing lists until a proper fix is implemented:
* While composing an email open the address book and select the list you are trying to send to, highlight all the names in the list and drag them to the To: box. This uses your existing data without modifying it.
* Replacing the blanks " " between the words in such lists' descriptions with an underscore "_". This requires modifying your mailing list(s) description(s).
* Downgrade to a previous version and disable automatic updates (Windows)

I need to know why a world icon appeared instead of the apple one when i turned my mac book on, what is this???? i am scared

why is a world icon appearing when i turn my mac book on instead of the apple icon, is this some kind of calling or what i need to know noww

Just FYI for future questions, this is the Mac Pro forum. The MacBook forum can be found here:
MacBook
Regards.

I don't understand why so many of us are having the same problem...

i came on here to post that itunes doesn't recognize my ipod, that it freezes up itunes when i plug it in (even though it doesnt recognize it), that it just stays in 'do not disconnect' mode even when i try to safely remove it, and the only way to disconnect is to turn off the computer or reset a couple of times.
i saw that there are a ton of people on here with the same problem, it seems pretty ridiculous, there is obviously a major problem with the software that so many people are having identical problems.
i tried everything everyone suggested on here- reset, restore (like someone else below, it just freezes the ipod updater program & cannot update OR restore), i did the holding select & previous to get that weird menu but couldn't find the "I/O" selection that was recommended to check the USB port, tried putting it in disk mode to update/restore but still no dice...
does anyone have any SUCCESS stories about getting their ipod fixed with these problems? it is my husband's ipod that is all screwed up & now I'm afraid to plug mine into the computer b/c his hasn't worked correctly since this started- it stops mid song or after playing just one song in a playlist, is making a lot of clicking noises, etc.
i guess the apple store is the only way to go or sending it back????
Thanks!!!!

Buegie:
I think you've missed the point of the original poster's post. There are many people here who have the same issue, and have explained themselves rather well. It would be one thing if the issue involved different error messages (and god forbid Apple provided meaninful messages for anything) or different physical problems or different attempts to solve the problem. I've read a number of these posts, many made within the past week, the majority since about mid-December, and all of them appear to be relatively similar.
Indeed, I am having the same issue, and have been since (as far as I can tell) late-December. My iPod works perfectly normally when not connected to my PC, but as soon as I connect it, iTunes, the iPod software, and even Windows itself will not recognize it as an iPod. The device appears to start normally, then reaches the "Do not disconnect" screen and remains there, causing whichever programs are currently attempting to mount the drive to hang (this includes Explorer and the iPod software). I am unable to stop these programs or unmount the iPod until either a) a timeout is reached or b) I manually disconnect it. I have come here as a last resort before calling Apple, as I have already read many of the support articles and attempted the fixes they provided, with no success. I have read through many posts on this board regarding similar issues, and none of the fixes provided by you or anyone else have been effective.
In short, while your posts may help those who have never diagnosed computer or device problems in the past, or who have not read through Apple's online help area, they are not the absolute answer to everyone's problem, and they are not specific enough to be of any assistance to those who have already narrowed the problem down. In this post in particular, you do little more than assault the original poster for suggesting that perhaps there is some other explanation for the plight of these users. One may be led to believe that you work for Apple and are attempting to cover up a known bug in the software or hardware so as to avoid the mass replacement of devices. While this conclusion is not altogether likely, your attitude and actions do not lead one to believe otherwise.
There could be any number of similarities to bring to light, and posts like yours prevent people from doing so. Perhaps it has something to do with the current version of iTunes, the iPod update software, the iPod service, a patch for Windows, or even dirt in the iPod's data port.
For those of you who are also experiencing the same problems the original poster and I are having, if you have already tried any or all of the following with no success, please reply to this post:
1. Restarting iPod (either connected or not connected to PC)
2. Ensuring that the iPod is fully charged
3. Restarting PC
4. Reinstalling iTunes and/or iPod software
5. Attempting to mount iPod in "Disk Mode"
6. Attempting to mount iPod with iPod service stopped
7. Running diagnostic tests on iPod (on restart, hold Select+Previous to reach diagnostic menu), all of which pass
8. Changing between Firewire and USB cables
9. Changing between Firewire and USB ports which are known to work properly
Thank you.
home built, foo Windows XP Pro

How to remove and add the component to JFrame at runtime.

Hi
How to delete the JTabbedPane component from the Jframe at runtime and how to add the same component with different data at runtime.
But the remaining components should not distrub.
When i try to delete and add the component at runtime the remaing components are distrubed.
when i minimize and maximize the screen, the components are adjusted. but i need a help on this without minimize and maximize the screen.

Hi
I am sending my code snippet, please look into this......i am doing the same even though i am not able to..................can u suggest anything seeing this code snippet.
here one function called createtabpane (It creates the JTabbedpanes with the table information at runtime).
private void getTimeSheetObj(String weekDate){
//Object[][] rowObj=null;
try {
System.out.println("Inside the gettimesheet method try block");
if(projTables!=null){
for(int i=projTables.length-1; i>=0; i--){
JTable jt = projTables;
jTabbedPane_Main.remove(jt);
System.out.println("Removing Table:"+i);
jPanel_Tabbedpane.remove(jTabbedPane_Main);
jTabbedPane_Main = new JTabbedPane();
jTabbedPane_Main.revalidate();
jPanel_Tabbedpane.revalidate();
getContentPane().validate();
getContentPane().repaint();
jTabbedPane_Main.addChangeListener(new ChangeListener(){
public void stateChanged(ChangeEvent ce){
getTabbedPaneListenerValues();
// this.setState(JFrame.ICONIFIED);
// this.setExtendedState(JFrame.MAXIMIZED_BOTH);
res = GetTimesheetResponseDocument.Factory.parse(new File("C:\\Narayana.xml"));
response = res.getGetTimesheetResponse();
proDets=response.getProjectDetailsArray();
numOfPro = proDets.length;
String taskDayValues[] = new String[8];
System.out.println(numOfPro);
proArr=new Object[numOfPro];
Object[][] taskValues=null;
for(int p = 0;p<numOfPro;p++){
System.out.println("Inside1");
taskDet = proDets[p].getTaskDetailsArray();
taskValues = new Object[taskDet.length][8];
for(int t=0;t<taskDet.length;t++){
System.out.println("Inside2");
taskValues[t][0] = (taskDet[t].getTaskName());
taskValues[t][1] = (taskDet[t].getDay1HH()+":"+taskDet[t].getDay1MM()).toString();
taskValues[t][2] = (taskDet[t].getDay2HH()+":"+taskDet[t].getDay2MM()).toString();
taskValues[t][3] = (taskDet[t].getDay3HH()+":"+taskDet[t].getDay3MM()).toString();
taskValues[t][4] = (taskDet[t].getDay4HH()+":"+taskDet[t].getDay4MM()).toString();
taskValues[t][5] = (taskDet[t].getDay5HH()+":"+taskDet[t].getDay5MM()).toString();
taskValues[t][6] = (taskDet[t].getDay6HH()+":"+taskDet[t].getDay6MM()).toString();
taskValues[t][7] = (taskDet[t].getDay7HH()+":"+taskDet[t].getDay7MM()).toString();
System.out.println("After taskvalues");
proArr[p]=taskValues;
createTabPanes(jTabbedPane_Main, proArr);
System.out.println("outside");
jPanel_Tabbedpane.add(jTabbedPane_Main);
jTabbedPane_Main.getAccessibleContext().setAccessibleName("Proj");
getContentPane().add(jPanel_Tabbedpane);
pack();
}catch(XmlException xe) {
System.out.println("Inside the XmlException block");
System.out.println(""+xe.getMessage());
} catch(IOException ioe) {
System.out.println("Inside the IOException block");
System.out.println(""+ioe.getMessage());
/* JOptionPane.showMessageDialog(null,
"Values Displayed in the below tables",
"Alert!",JOptionPane.ERROR_MESSAGE); */
System.out.println("Initial JFrame Bounds:"+this.getBounds());

Need help understanding why "1 is always equal to 1" is necessary in my Advanced Action

I am using Captivate 7 and publishing as a SWF.
I have an interaction that works, but there's one script that I use (which I found in a tutorial) that I don't understand the purpose of.
The interaction is contained on a single slide where a user clicks two buttons in any order and a graphic appears after the second click. On each button I have a Conditional Advanced Action where I first check that it will always be true that "1 is equal to 1", then assign each variable with "1", then check that each variable was equal to 1 after which the graphic appears.
The part that confuses me is checking if "1 is always equal to 1." Why is this script necessary in this case? Is it necessary because I'm including a Standard Advanced Action (assigning variables to "1") within the Conditional Advanced Action? Or is related to the fact that I'm doing everything on one slide (not using an On Enter slide event executing a Conditional Advanced Action)?
Thanks.

Perhaps it will help to think using different terms.
If you need a script that performs a check against some condition, you need a Conditional Action. Maybe you need to show an image if button 1 has been clicked. And if button 2 has been clicked, you need to show a different image.
Before checking to see which button has been pressed, you need to hide both images so that only the desired image is shown. So you need to perform the same action each time before checking some variable to take a specific action.
This is where the "If 1=1" would come from.
Each time the script is run, hide both images. Since the check to see if 1=1 will ALWAYS evaluate as true, the "ELSE" part will never be reached. So you would always perform the same actions just as a Standard Action would do.
Perhaps if you posted some screen captures of your scripts, we might better explain it.
Cheers... Rick

I am using a web site, and can read my mail, but they said it is you, I am unable to reply to people, and need to understand why this is happening

I am unable to reply to the people here

When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
(You also can clear Firefox's cache completely using:
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now")
(2) Remove the site's cookies (save any pending work first) using either of these:
While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help?

NEED TO UNDERSTAND WHY/WHY NOT TO USE/BUY SERVER

Hey there -
I have a small business (3 employees total.)
My issue thus far has beens scheduling meetings through iCal, etc., and sharing files. Basically, I want my assistant and my partner (and my wife at times as well) to be able to send me invites (vice/versa) for meetings AND also have the ability to make changes to those meetings. Meaning, if my assistant sends me an invite, then only SHE can make changes to that meeting. But say I want to move the time myself or add something to the event, then I need to have her do it and resend the updated invite.
Will server fix this?

Hi mcforman-
No, OSX Server in and of itself will not solve your problem. Your money may be better spent on a scheduling program that can suit your needs.
Have you tried posting your question in the iCal forum? There are knowledgeable folks there that may be able to help: Category : iCal
Luck-
-DaddyPaycheck

Why can't i remove some of the programs on Mountain Lion? Could always do this before...

How come I can not remove some the programs that have been installed on Mountain Lion? I get a box that says its part of the O/S.
This is starting to sound like something that they do in Windows.
Do Not like it at all.

Hi'
No I don't want to delete any part of the O/S. What I wanted to do was what I could always do In the past and that was to able to remove programs that I had no use for. An example would be CALCULATOR, CHESS, STICKIES AND OTHERS.
Now it looks like we are stuck with what ever Apple decides what we should have!
Starting also to look like the IPAD, as the same goes for it.

I've got remember passwords activated but have changed one of my passwords and had to remove it from the list. It's not offering the option to remember the password for this site any more. help!

I've had this happen on a couple of sites where I've changed passwords. It doesn't offer to remember the new password whether I login when that side is still on the list of those with saved passwords, or whether I delete that site from the 'saved passwords' list first. It just...doesn't offer the option to save the password. How can I fix this???

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
*You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
*To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Deselect: [ ] "Permanent Private Browsing mode"
Some sites like PayPal and bank sites use autocomplete="off" to prevent Firefox from saving and filling in the name and the password.
If a site uses autocomplete="off" then look at this article for a bookmarklet to remove that autocomplete attribute and Firefox will offer to store the name and password.
* http://kb.mozillazine.org/User_name_and_password_not_remembered (bookmarklet)
* http://kb.mozillazine.org/Password_Manager
* http://en.wikipedia.org/wiki/Bookmarklet

Need to understand why I had to remove / re-add the alias

Similar Messages

Maybe you are looking for