Need to Update SELECTION TEXT and text symbols for report J_1IEWT_CERT.

Hello Experts,
My requirement is need to "Update SELECTION TEXT and text symbols for report J_1IEWT_CERT".
1. As I want to change text sysmbols for 006 to "Run in preview mode". Currently it showing "Type of output". Issue I am facing here is that whenever I deleting aur changing the same it throws an error : "Text symbol 006 is an original text and cannot b
deleted or renamed".  How can I do the same.
2. Secondly I have to add two selection text also i.e. ZFATHER and PREV . And delete two selection text i.e. P_PDF and
P_SCRIPT. In this Tab there is only a Icon of deleting not an Addition button .So How can I add two more selection text.
Above are Manual Activities which is written in note 1486147. We already taken an acess key and it shows in editable mode but
not able to add/deletin/modify selection text and text symbols.
Please provide the solution as it is critical requirement.
Reagrds,
Supriya Bhatt.

Hi Vishal Saxena,
Just go through the screens and do it .
[<li> Link1|http://4.bp.blogspot.com/_O5f8iAlgdNQ/SjoVqL9rnvI/AAAAAAAAEs4/fPG7IG9yGK4/s1600-h/3-716953.JPG]
[<li> Link2|http://1.bp.blogspot.com/_O5f8iAlgdNQ/SjoVp3d9uEI/AAAAAAAAEso/ZxfkeNAiOZQ/s1600-h/1-715669.JPG]
[<li> Link3|http://2.bp.blogspot.com/_O5f8iAlgdNQ/SjoVqIbpNpI/AAAAAAAAEsw/2ntYgX-i1Dc/s1600-h/2-716353.JPG]
Thanks
Venkat.O

Similar Messages

  • What is the difference between Standard text and Text Symbols?

    Hi,
                1.Difference between Standard text and text symbol,?
                2. Which we use Standard symbol?

    Text symbol
    Text symbols are symbols representing text elements. In fact, a text symbol can be defined for every text elements. The reading of the form is easier in the SAPscript editor. The name of the text symbol must not exceed 32 characters and its value 60 characters. The value assignement can be done in two ways:
    - Using the following command: "/: DEFINE &SYMBOL&='TEST_SYMBOLE'"
    - Using a standard text symbol.
    The text symbol value is temporary stored. When the print program finishes the execution, the text symbol does not exist anymore. The text symbol must have a value when it is declared.
    Also check this link,
    http://www.supinfo-projects.com/en/2005/forms_sapscript_en/5/
    Standard text are good, if you are using them in more than one SAPScript, because you have to maintain them only once, and not in every SAPScript.
    It is really good to write rarely changing texts into the SO10 standard texts (for example company name, and address).
    standard text is not always used in scripts. when ever u want to display some data u need to use standard text so that the data gets displayed. Say, u have a large piece of document which needs to be printed at end of script... rather than writing the whole thing in script, we create standard text using SO10 and then use the name along with standard text in script.

  • Selection text and text elements contents not displayed

    I have a language related problem
    I have 2 servers .
    In first server I logged in english language and the selection text and text elements are displayed in English.
    The requirement is I dont want to translate these texts it should be displayed in English only even if I log into SAP with other language.
    So if I log in german I see the texts in English in the first server.
    But this is not the case with second.
    If I log in with English I see the english texts but if I do in german I am not able to see this english text with proper contents .
    Can anybody let me know if there are any settings to be done ? As its working fine in first server but not in second .
    Edited by: Jalpa Shukla on Oct 22, 2008 11:19 AM

    Hello Jalpa Shukla,
    If you want to display the text in english language only better dont use Text-element
    instead of using text element you hard the text in the program then you will display the text in same in English.
    Try in this way, If not past the code i will give the solution

  • I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case som

    I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case someone left me a message. How do I resolve this issue?

    Wifi:  my Cell phone will remember 10 wifi connections.  So delete any you don't use often and your home wifi and try to enter home wifi again.
    if it still won't connect to home wifi, call your internet provider for help.  You may need a newer router or different settings Or upgraded service.   Your phone seeks the best connection and will refuse lesser connections.
    last resort.  Backup the phone.  Do a full reset, then restore as new with the backup.
    if still not fixed, go back to apple and insist on repair or replacement.
    HOWEVER.   voicemail is not a wifi issue, it's a carrier function, which is why the SIM card is a suspect.

  • HT6058 I need to update my iPad and dere is no wifi in range what can I do about it

    I need to update my iPad and dere is no wifi in range

    There are two ways to update - via wifi or connect the iPad to a computer and use iTunes.
    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
    How to Upgrade to iOS 7
    The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
    There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
    To upgrade using Wi-Fi:
    Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
        1.    Go into the iPad's Settings.
        2.    Locate and tap "General" from the menu on the left.
        3.    The second option from the top is "Software Update". Tap this to move into the update settings.
        4.    Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
        5.    Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
    To upgrade using iTunes:
    First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
    You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
    Now you are ready to begin the process:
        1.    If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
        2.    Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
        3.    After canceling the dialog box, iTunes should automatically sync with your iPad.
        4.    If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
        5.    After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
        6.    From the iPad screen, click on the Update button.
        7.    After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
        8.    After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
     Cheers, Tom

  • Standard Texts and Text Modules

    Hi,
    How to include standard texts and text modules in Adobe Print Forms?
    Is there any solution?
    Thanks !

    Hi
    You can call standard text and text modules by the following options :
    Create One Text Window by right clicking the option.  In this general attributes tab select the 'Text Type' as 'Text Module' and it will ask for the Name of the text module.
    Press f 4 help to select the text module.  And enter the language also.
    Thanks

  • Difference between Include Text and Text Modules in Smartform?

    Hello Experts,
    I need to know the differences between Include Text and Text Modules in the Smartform.
    When we create a Text in smartform, the text type can be text element Or Include Text Or Text Module.
    Now i need to know the differences between Include Text and Text Module.
    Thanks and Best Regards,
    Suresh

    Hi Suresh,
    Kindly check the below link for Text Modules.
    [http://help.sap.com/saphelp_nw70/helpdata/EN/24/ccbd2a00c811d4b588006094192fe3/content.htm]
    For Include Text:
    [Include Text|http://help.sap.com/saphelp_nw70/helpdata/en/03/7560efcf0d11d3b565006094192fe3/content.htm]
    Regards,
    -Syed.

  • My iPod touch was stolen and recovered.  I can use my Apple id for this site but the theif changed the Apple id needed to update apps etc and I do not know how to delete his acct. Any help with this will be greatly

    My iPod touch was stolen and recovered.  I can use my Apple id for this site but the theif changed the Apple id needed to update apps etc and I do not know how to delete his acct. Any help with this will be greatly appreciate

    If the thief enabled activation lock on the device, then there is nothing that can be done.  Only the password for the Apple ID that it is locked with can disable activation lock.

  • What is the latest update available for Mac OSX 10.5.8 that will allow me to get the latest update for iTunes.  I really need to update my iPhone and CAN'T!!  GRRRR!!!

    What is the latest update available for Mac OSX 10.5.8 that will allow me to get the latest update for iTunes.  I really need to update my iPhone and CAN'T!!  GRRRR!!!

    Minimally you need Snow Leopard or greater:
    Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion — System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • HT1338 I need to update to Lion and then Mountain Lion, but I need a CD or other means to update as my internet is too slow and I have a GB limit. Is this possible?

    I need to update to Lion and then Mountain Lion, but I need a CD or other means to update as my internet is too slow and I have a GB limit. Is this possible?

    Thanks for your response. I was told, obviously misinformed, that you needed to dl Lion prior to Mountain Lion, so thanks for clarifying that. I cannot dl from the internet as it is too slow and I have limited GB per month. I know, at one point, you could purchase a jumpdrive with Lion for those of us who have this problem or no internet access. I will check into that via Apple or try to borrow internet service from a friend and move my computer there.
    Thanks again.

  • Need to Update Customer Address and Email Adress in AR

    Hi ,
    I am new to AR.
    I need to update Customer name and Email Address in AR. Can you please provide me if there is any API or Interface Exist.
    Also please provide me the steps and the maditory values which we need to provide during the updation.
    Regards
    Suresh P

    Check irep.oracle.com to find out about all available APIs
    Also check
    Oracle Integration Repository Documentation Resources Release 12 (Doc ID 396116.1)
    IREP - Oracle Integration Repository: The Tool To Find Which API Is Supported and How To Use It ... (Doc ID 554986.1)
    Hope this answers your question,
    Sandeep Gandhi

  • Standard Text and Text element

    Hi Everyone,
                      Hope you all doing great.
    What is the difference between SAP Stadard text and Text elements? When and where to use these?
    I have got Terms and condition text for my quote O/P Document, Is it okay if i go with Standard text?
    What is the Text ID i have to use?
    Thank you
    Kris

    Hi
    Difference between  SAP Standard text and Text elements :
    SAP Standard text : The standard texts which have been already created and can be created
    Text Elements :  They are the elements which are available in VOTXN and are assigned while configuring text determination
    Regards
    Srinath

  • I need to update my iTunes and iPod touch,iPad and iPhone but they were set up with a hp laptop that i sold i tried to update my iTunes and apple devices but it tell's me if i update i will lose all media on my devices and to update with the original com

    I need to update my iTunes and iPod touch,iPad and iPhone but they were set up with a hp laptop that i sold i tried to update my iTunes and apple devices but it tell's me if i update i will lose all media on my devices and to update with the original computr

    Go to www.ecamm.com and d/l PhoneView.
    To prevent a sync when plugging in the iPod/iPhone - hold down the 'option' and the 'command' keys when plugging in the iPod/iPhone - key the keys down until the iPod/iPhone is listed under the Devices list in iTunes - this will prevent a sync from taking place.
    With PhoneView you can take the content from the device to the iTunes library.
    MJ

  • I need to update illustrator, flash and after effects and I keep getting the same error 49 over and over

    I need to update illustrator, flash and after effects and I keep getting the same error 49 over and over. Please help thanks!

    Link for Download & Install & Setup & Activation problems may help
    -Chat http://www.adobe.com/support/download-install/supportinfo/
    OR
    -http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
    -http://forums.adobe.com/community/download_install_setup
    -http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
    -http://helpx.adobe.com/x-productkb/global/errors-or-unexpected-behavior-websites.html
    -http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html
    -Server won't connect https://forums.adobe.com/thread/1233088

  • On several of my apps my iPad 2 w/ IOS 4.3.3 said I needed to update the apps and the updates were for ios4.3.3 but now the apps don't work at all after updating.  They just flash on the screen but don't stay displayed.  What is going on?

    On several of my apps my iPad 2 w/ IOS 4.3.3 said I needed to update the apps and the updates were for IOS4.3.3 but when the update was complete the apps would no longer work.  They would just flash when I tapped the screen to bring them up but will stay displayed.  What is the problem?

    I Also have this problem!!
    In my situation, the screen simply started exhibiting the same symptoms a few weeks ago (early February) for no apparent reason.  At first I thought the screen was dead, but discovered the heat solution by accident.  Now I turn it on and keep it from going to sleep until I go to bed.  Thank goodness the battery is still awesome on this thing.
    I bought it new and still has the original screen, I keep it at home (never below 62 degrees).  Coincidentally, this happened a day or two after the expiration of the warranty!!  Any help figuring this one out would be eternally appreciated.
    iPad mini retina Wi-Fi, iOS 8.1.3

Maybe you are looking for