Need to UPgrade Flash Memory ?

If Cisco 3845 has following 2 Flash Memory,
-31360K bytes of ATA System CompactFlash (Read/Write) <------- 32MB Internal CompactFlash Memory  installed
-31360K bytes of ATA Slot0 CompactFlash (Read/Write)  <--------- 32MB External CompactFlash Memory  installed
Can I install IOS which require Flash Memory 64MB on 32MB Flash ×2 ?
or Should I upgrade to Compact Flash 64MB from either 32MB ?

Are you sure this is not a 3700 router because I don't recall the 3800 having an internal and external CF.
I'd recommend you upgrade to a bigger CF.  The 3700 and 3800 will support CF up to 2Gb.  Format the CF first before loading anything into it.

Similar Messages

  • How do I get out of kernel panic?  kernel panic upon boot.  I did that hard drive cleanup and reinstalled Lion.  What about memory?  Anyone think I need to upgrade my memory?  I have 8gig.

    I get kernel paic upon boot.  I did that hard drive cleanup and reinstalled Lion.  What about memory?  Anyone think I need to upgrade my memory?  I have 8 G of upgraded RAM. (20 inch iMac core 2 duo)

    If you're able to boot, launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
    If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Safe mode is slower than normal, and some things won’t work at all.
    Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.

  • Upgrading flash memory

    I am going to upgrade flash memory in a 2621 router.
    To install the new IOS version I will have to use the tftpdnld right?
    TIA

    Xmodem is usually very slow unless you increase the baud rate to atleast 19200 bps. Make sure you set the TFTPDNLD parameters (5 of them) properly. Use this link for tftpdnld.
    http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a008015bf9e.shtml

  • Games won't load due to "Need to upgrade flash player" which should be updated already in chrome

    My flash player is 11.7.700.203  Adobe says it should be 11.7.700.225  Chrome is supposed to update automatically and when i try to play games like candy crush is won't load and says I need to grade my flash player. I need help bad.

    Assuming you are on Windows, do you see Version 27.0.1453.110 m when you go to the About Google Chrome menu item?

  • Whenever I try to go into facebook on home puter it says I need to upgrade flash player.

    I updated it from the adobe website but no joy. I think its a nasty (virus, malware) but av, etc couldn't find it.Anybody else had this problem?

    What OS?
    What browser?

  • After Effects Needing .0002GB more of memory,  Help!

    I am currently careting an informational video for my company in After Effects CC. The video is roughly 4 minutes long but I am breaking it down into smaller projects. The only I am currently working on it about a minute long and is basically just a slide show of products we use. For the slideshow I am using Idustrial Revolution: CoverFlux. I keep trying to preview it but it gets to about 3 seconds and tells me " AE cannot allocate .0002GB of memory to render the current frame.". I have tryed to add More RAM to AE giving it the max it will let me (6.5 GB), I have cleared any Cache, etc and it still will not allow me to render it. Is there any way to give it more memory or do I just need to upgrade the memory of my computer? I have a 27in iMac with 8GB of memory and room for 2 more memory slots saying " each slot accepts a 1600 MHz DDR3 memory module. " If I upgrade to more memory will that help me? Or using an external hard drive?

    > I'm using the most up to date AE in the could.
    Please give the exact version number.
    > One of your program developers was playing around withthose settings he said and it wasn't helping render any more than roughly 5 additional frames.
    Who?
    Are you meaning to say that you are already in communication with Adobe Technical Support? If so, then you should just continue with that, not here on the forum.

  • Please Help! I tried to upgrade Flash Player, but have older computer

    Please Help! -- I tried to upgrade FLASH PLAYER, but I have an older MAC laptop OS X 10.4 = Version 4.1.3 (4533.19.4). 
    I need to UPGRADE Flash Player; however it's not available -- Recently, I cannot watch some videos or access particular websites.
    I'm a teacher, and CAN'T AFFORD to buy  a new computer at this time.
    > Can Adobe Corp. please help by offering an expanded range of UPGRADE support ??

    Unfortunately, if you're running OS 10.4, odds are that your Mac is a PowerPC model (-About This Mac will let you know for certain), and the newest version that will run on your system is Flash Player 10.1.102.64 and 9.0.289.0 (126 MB)
    That's a direct link to the download, you can right click (or control+click) and save it to your downloads folder. Expand it with Stuffit Expander and run the 10.102.64 installer.
    That's the best that can be hoped for because if your Mac is PowerPC, and I suspect it is, even Apple no longer supports it since September of 2009. The next OS X version (10.5) won't run the latest Player either. You'd need an Intel Mac with 10.6.3 or newer to use Flash Player 11.8.800.94.
    PowerMax does have some really good deals on "pre owned" Macs. I've bought three from them myself over the years.

  • Notice from websites that I need to upgrade my browser: I have a macbook pro, version 10.6.8 What do I need to do here?t

    I've started receiving alerts from websites like Pandora , et al that might browser needs to be updated. What to do? Does this require a new version of Safari? If so is there anything else I need to be doing or installing for compatibility?
    Model Name: MacBook Pro
      Model Identifier: MacBookPro5,5
      Processor Name: Intel Core 2 Duo
      Processor Speed: 2.26 GHz
      Number Of Processors: 1
      Total Number Of Cores: 2
      L2 Cache: 3 MB
      Memory: 2 GB
    Thanks

    You would need to upgrade the memory before you can do anything else, you are using shared video, some features of Yosemite will not be supported, and at over 5 years old would be pushing it.
    An SSD upgrade along with more RAM would help, might buy you time, or would be better spent on a newer MacBook Air or something else instead.
    http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3
    Apple Special Refurbished cost a lot more but a Core i5 would help along with more memory and modern SSD.
    http://store.apple.com/us/product/FGX92LL/A/Refurbished-133-inch-MacBook-Pro-28G Hz-Dual-core-Intel-i5-with-Retina-Display
    http://store.apple.com/us/product/G0P02LL/A/refurbished-133-inch-macbook-air-17g hz-dual-core-intel-core-i7

  • I have a macbook 4.1 with osx10.6.8 and just added memory (2gig) so I could sync my new Ipome and Ipad.  and Ipad. Now I'm told I need to upgrade my operating system. The apple store gave me conflicting instructions. Any suggestions? Thanks

    I have a macbook 4.1 with osx10.6.8 and just added memory (2gig) so I could sync my new IPhone and Ipad. Now I'm told at the apple store that I need to upgrade my operationg system. They said they couldn't help and gave me conflicting advice about what to do. Any ideas? Thanks you!

    There are three models of MacBook that comprise the 'macbook 4.1' category, and each of them a little different; however other than 'macbook 4.1' the other thing they have in common is they all are considered Early 2008. Two are white, one black, polycarbonate case, Core2Duo 2.1GHz, 2.4GHz white, 2.4GHz black.
    So if you can determine which one, if any of these, is the model build year and spec you have, that would be handy. Did you tell whoever you spoke to the serial number of your computer, so they'd know by looking up the specs to see what the supported maximum RAM upgrade capacity was, and other minimum requirements to make any upgrade to Mac OS X 10.6.8 at all?
    If you have the serial number you can do a lookup to 'indentify by serial number' online, and use that information to determine if the computer needs even more RAM to take it past the minimum for Snow Leopard 10.6.8 and then get it ready to upgrade (via paid download from App Store, Snow Leopard gets you that far) and see what the next supported OS X full upgrade would be for the hardware limitations on that old MacBook.
    If your MacBook IS a 4.1 build, the highest OS X it could run if it has the 2.4GHz cpu, is Lion 10.7.5. That would be an upgrade from the App store, available to OS X 10.6.8+ computers that access it online. And I kind of doubt how supported a newest iphone etc may be in lion.
    everymac.com has a fair amount of information across many years of Apple computing hardware...
    Here's the three MacBooks that share the 4.1 designation; first shipped with as much as 1GB RAM upgrade and the other two only a 2GB RAM*, (one white/one black color) according to this information...
    • MacBook "Core 2 Duo" 2.1 13" (White-08) 2.1 GHz Core 2 Duo (T8100)   
    • MacBook "Core 2 Duo" 2.4 13" (White-08) 2.4 GHz Core 2 Duo (T8300)  
    • MacBook "Core 2 Duo" 2.4 13" (Black-08) 2.4 GHz Core 2 Duo (T8300)
    ...as seen here: http://www.everymac.com/systems/apple/macbook/index-macbook.html
    *But according to MacTracker (free: download database) http://mactracker.ca
    these MacBooks can use more RAM in aftermarket specs as much as:
    Maximum Memory
    6.0 GB (Actual) 4.0 GB (Apple)
    Memory Slots
    2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
    To get more information use a service such as this...
    •identify by serial number:
    http://www.powerbookmedic.com/identify-mac-serial.php
    The Apple? store or whoever you talked, to may have been as accurate as they could be without further research. Could be you may have a newer or older MacBook, which would change whatever later OS X it could run past 10.6.8. And to go past Snow Leopard, you need to download the last bits for 10.6.x to be able to go and get any later upgrade. The ones that may let a newest iphone or ipad work with it, are past SL10.6.8
    Anyway, as you further verify the model build year and configuration specifications, report back.
    Good luck & happy computing!

  • Need to upgrade memory in ppc mac mini

    Does anyone know of a step by step guide with pictures to installing memory in a ppc mac mini? Need to upgrade to a gig to use some graphics software. Thanks,
    Steve

    In sleep mode (STR) the RAM has to be refreshed to
    keep the memory content, so the more you got the more
    power will be consumed on this.
    Having less ram will therefore benefit battery life
    in sleep mode.
    This is only of concern to portable users of course, and the additional RAM has barely any impact on power demand whether from mains-power or battery. Some admittedly, but not much. Nor would it be all that easy to tell what drain it caused since there are other variables involved with battery drain rates too, such as ambient temperature.
    There is still room for improvement in whatever
    algorithm it is that determines when "inactive"
    memory is released. Paging frequently happens after
    copying large files since all memory is in use and
    "recently" so, even if this use is one where the
    content is NOT likely to be needed again.
    The much hyped idea that "old" inactive memory is
    being released when more is needed I find it
    difficult to confirm, or paging would not be needed.
    Simply caching EVERYTHING does not in my mind count
    as an "intelligent" algorithm..
    As much as this may be valid, there is no way the user is able to change the algorithm - it's part of the operating system. As such, the user can really only take such steps as may be possible to improve the working of the system - one significant such step being adding RAM.
    This can be cleared up by running "repair
    permissions" in DU, since it seems to release much of
    the inactive RAM. It would be much better to have a
    small utility to do this, though, if making the OS
    more intelligent is not an option.
    Running disk utility may be an effective method of resolving memory allocations etc, but it then places the onus on the user to monitor the system and manually activate a process. Part of the appeal of MacOS to many people is that it removes much of the onus users of other operating systems feel is placed on them to keep tuning the system - activities which detract from the use of the system.
    Ultimately, I have to say that I have never found the need to do anything of that sort. I do use MenuMeters (a very neat little app to place system monitoring tools in the menu bar and which uses barely any CPU overhead to do so) to watch the status of my system, but only as an occasional troubleshooting aid when I'm testing software or experimenting with the system. That is about as far as I go with anything other than using the system. Certainly, I've not found any need to perform the sort of tasks that are often being recommended, and even the systems I run 24/7 remain efficient in operation.
    I can say that while my G4 was running off a 5400rpm drive, increasing RAM from 768Mb to 1.5Gb quite dramatically improved performance of both 10.4 and 10.2 but had little benefit in OS9 (all booting from separate drives). The effects were rather less noticeable after swapping out to 7200 drives instead.

  • I have a mac mini mid 2011, this device have; 2,3GHz and 2 Gb Memmory.I want to upgrade the memory and i need the list of supported memory modules

    i have a mac mini mid 2011, this device have; 2,3GHz and 2 Gb Memmory.I want to upgrade the memory and i need the list of supported memory modules. i am from turkey.

    Welcome to Apple Support Communities
    The Mid 2011 Mac mini supports 8 GB of memory officially, but you can install up to 16 GB of RAM, so you can use 2, 4 and 8 GB modules. You can buy more RAM from OWC or Crucial.
    If you are looking for memory at a local shop, make sure you buy 1333 MHz DDR3 memory. See > http://support.apple.com/kb/HT4432?viewlocale=en_US&locale=en_US

  • I need to upgrade memory slots on my Mac mid 2010 up to 4 GB module which is currently 2GB with two different 1GB memory  slots.Is it compatible and would like to know about the cost?

    I need to upgrade memory slots on my Mac mid 2010 up to 4 GB module which is currently 2GB with two different 1GB memory  slots.Is it compatible and would like to know about the cost?

    this sub forum is about running windows on macs maybe you should try
    https://discussions.apple.com/community/notebooks/macbook

  • How does one update Flash? I currently cannot watch videos on You Tube, it says I need to upgrade, I have no problem doing this on a PC.

    How does one update Flash? I currently cannot watch videos on You Tube, it says I need to upgrade, I have no problem doing this on a PC.

    If you're not using chrome you can just go to adobe's website (http://get.adobe.com/flashplayer/) and download the newest flash player.  You run the .dmg and then open the application, which updates flash.  With the latest version of flash there should be a preference pane within system preferences to allow you to change settings and check for updates.

  • Videos won't play in Safari. Notice says, "You need to upgrade your Adobe Flash Player to watch this video." I have downloaded it, but no change. All videos play OK in firefox, but I like the controls in Safari better and want to stay with it.

    Videos won't play in Safari. Notice says, "You need to upgrade your Adobe Flash Player to watch this video." I have downloaded it, but no change. All videos play OK in Firefox, but I like the controls in Safari better and want to stay with it.

    Try deleting Flash cookies.
    Flush.app – Flash Cookie Removal Tool For OS X | MacHacks.TV
    If that doesn't help, UNinstall the old Flash plugin first, then reinstall new.
    Troubleshoot Flash Player | Mac OS
    Then restart your Mac.

  • I am unable to see videos on amazon prime because it says I need to upgrade th Flash player ...which

    I am unable to see videos on amazon prime because it says I need to upgrade the Flash player ...which I have done many times, still is not working. I have MAC  os x  10.5.8*
    Can you help me?

    What version of Flash Player do you have installed?
    http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html

Maybe you are looking for

  • Uneven Seam

    The iPhone 3G that I bought Saturday night has a slightly uneven seam along the side with the volume keys. In other words, while running my fingers along the other side feels quite smooth, the side with the volume keys has a noticeable ridge -- the s

  • Exprt sounds in second frame

    is there any way to export sounds in frame# just like the ActionScript setting Export classes in frame# (Flash CS3) Export frame for classes(Flash 8) i need to make a preloader for my SWF. and i have about 100+ sounds to use with AS later so i want i

  • Re:JDBC Communication Channel

    Hi, I am getting the following error in Communication channel of JDBC:                                Error during database connection to the database URL 'jdbc:oracle:thin:@host:port:SID' using the JDBC driver 'oracle.jdbc.driver.OracleDriver': 'com

  • Verry slow transision

    i like to make a slideshow -preferebly in iphoto- with verry slow transisions.show a photo for say one sec. and than fade to the next in say twenty sec. is that possible? does anyone knows an alternative? thanks 1book 12"   Mac OS X (10.4.3)  

  • Bluetooth connectivity with iPhone 6

    Is Apple STILL having an issue with Bluetooth connectivity in cars with the iphone6? I am getting very frustrated as I have had my iPhone since the beginning of October. Does anyone know how I can resolve the issue? I travel a lot and would graciousl