Need to use both the ports of PRIME-NCS-APL-K9

Hi all,
I am having NCS prime appliance. In that i have two Ethernet ports. I want to use both the ports for connectivity .
Can anyone please confirm that is it possible to bond these to ports and assign a single ip to these ports.
I wants to have redundancy in case of failure of links.
Thanks in advance ,
Selva

Hi Selva:
This isn't possible today. Whether a physical or virtual NCS/Prime Infrastructure appliance, the two NICs are separate and cannot be etherchanneled, NIC Teamed or combined in any other way with one IP address covering both of them. When both NICs are used, one will be for reaching the GUI for access and the other for sending SNMP traffic over to the managed devices, but most folks use just one.
If you need this functionality, please contact your Cisco SE, Cisco account team or Cisco authorized wireless reseller, and discuss it with them. The sales side of Cisco has procedures in place to accumulate customer inputs like this across all the customers they serve, and to get that input forwarded to the various business units within Cisco for possible inclusion in future releases of Cisco's products.

Similar Messages

How can I split the video port of an older Mac Mini so I can use both the 922-6199 DVI to RCA, S-Video Adapter and a Cinema Display?

How can I split the video port of an older Mac Mini so I can use both the 922-6199 DVI to RCA, S-Video Adapter and a Cinema Display?

Which exact Mini?
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

If you are traveling in Europe, do you need both an adapter AND a voltage regulator to charge the IPad2 and the iphone? Or, the reverse, will it hurt either if I use both the adapter AND the voltage convertor?

If you are traveling in Europe, do you need both an adapter AND a voltage convertoro charge the IPad2 and the iphone? Or, the reverse, will it hurt either if I use both the adapter AND the voltage convertor?

You may only need adapters for the different kind of sockets, depending of the country you want to travel. A voltage converter is not needed.
The Apple power units are multi voltage devices, supporting a range from 110 V to 240 V. as you can see on the labels. O.K. for most of the labels you need a magnifier, but its on them.
Have a pleasnt journey
Lupunus

Use both the DVI & VGA ports on docking station

Is there anyway on the T60 that you can use both the VGA and the DVI ports simultaneously with the laptop LCD (3 monitors). This T60 has the ATI FireGL card.

mbmpcpro, welcome to the forum,
sorry, it's not possible. There are various threads on this subject, here for example.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Using both the display ports on the new mac book pro

Hi, are there some one in Appel that can tell me if its possible to use both the display ports on the new mac book pro to show keynote on? or if its possible to make that possible? i would really like to be able to create a keynote with 5120 x 1600 pixels and get that output on two display ports, so that i can use my hardware to make a keynote with really nice reselution. its for use on a screen size of 18x4 meter.

Connect one display to the Mini-Displayport and the other to a USB port using an adapter like this:
http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/
Or buy a Matrox DualHead2Go DP Edition external video box and connect both displays to that, which in turn connects to the Mini-Displayport on the computer.
There are limitations either way. A USB-connected display will be less responsive than one connected to the MDP, because USB 2 is slow. To use two displays with the Matrox box, I believe the displays must be identical. Read and understand all the caveats about each alternative before making a decision about which way to go.

MBA will not allow me to use both usb ports at the same time.

My MBA will not allow me to use both usb ports at the same time. as soon as i plug the second in the first is disabled. trying to use a modem and printer.

What kind of peripherals are you connecting? Sometimes if an external device is drawing too much power, then it will shut down one of the USB ports. Make a test connecting two usb flash drives, it should work ok.

Using both usb ports the macbook doesn't charge, is that normal?

Hi, as headline says I'm using both the usb ports of my macbook pro 13", with an external HD and an externat audio interface. The macbook is attached to the charger, but it's not charging (i guess it's using the power without charging). The Macbook it's not fully charged.
thank you
Federico

And what happens if you disconnect everything from the USB ports? BTW, your charger will kick in when the battery charge falls below 94%.

Issue Using both Firewire Ports on 24" iMac

I just got a new 24" iMac with the 3.06 processor. I intend to use it with Pro Tools and other music making software. I have an audio interface that is firewire only and an external hard drive (where I store my audio files) that is both firewire and USB. The problem is that I when I use both firewire ports (800 and 400) at the same time, my Pro Tools starts acting up. And I found one post stating that this was a known issue with the 24". But that was back in May and I thought it would have been resolved by now. Anyway, when I use the USB port on my hard drive instead of the firewire, everything works. Also, on my 17" iMac PPC G5 everything works just fine on there, including using both firewire ports a the same time. Finally, I've got the latest updates on all devices involved. Has anyone experienced this problem or have any knowledge of it? Thanks in advance.

I've got a similar problem. I've got a WD external drive connected via FW800 and an Mbox pro 2 audio interface connected via FW400 to my 24" mid 2007 iMac. They both power on (the mbox gets it's power from the iMac) and are recognised by the iMac. However, the WD drive seems to take dominance at some point during start up. The reason I know this is because I was watching the LED on the Mbox light up as I sent it signal from the guitar and then it suddenly stopped lighting up. I tried daisy chaining the mbox to the WD but outcome was the same. Then tried chaining the WD drive to the Mbox (this meant the WD drive was now down to FW400 speed). It worked!!!.............until the next time I started up the computer. The WD drive wasn't recognised by the iMac.
I'm not impressed with the iMac's inability to deal with devices from both it's ports. Why put them on the machine if they can't handle it?
I bought the WD drive to work at FW800 speed and don't want to have to submit to USB 2.0 if I can help it.
Any suggestions welcome.
Thanks

Aggregate Bandwith of Stacking two Sg500 using both stacking ports?

Is the bandwidth 2Gbps when using both stacking ports to connect just two switches together?

No. If you're using both ports in a two-switch stack, you're using a ring topology and Fast Stack Link Failover will cause the inactive link to be used if the active one fails. Only 1Gb of bandwidth will be available on a single link.
If you want to maximize the bandwidth between the stack members and the switches have close physical proximity, you can use dedicated copper stacking cables (SFP-H10GB-CU1M) to get 5Gb out of each link.

Using both phone ports on linksys rt31p2

i have configured both my phone ports to two different service providers on my linksys rt31p2 box.individually both the ports work fine if i get call on either one line at one time,but if i get call on both the lines at the same time,one line becomes totally dead- meaning no voice on either side and one line functions fine.
if i get call on line 1 and while i am talking i get a ring on line 2, the line 2 will have no voice but i can continue talking on line1 without any problem
pls help what to do?
the QOS for voice upstream is enabled and set to 512 kbps
Message Edited by cheetahzee on 04-16-2009 04:21 PM

My 2 phoneline LED's are not on. When inputtting the following VOIP settings:
Proxyserver: sip.voibuster.com
stun server: stun.voibuster.com
Display and userid: the same as registration
They use port: 5060
I have put also port 5060 in the application and gaming settings.
I have tried actually multiple settings and read through all the setup guides and after 5+ hours I thought to ask on this forum for some advise. Hope you have some?! look forward to hear from you.
Message Edited by jackmin on 05-25-2009 11:11 AM

Using both the output and the internal speakers?

Hello,
Is using both the internal speakers and the output speakers on new iMacs an absolutely-no-way thing or I just haven't found it yet?
It seems I've needed it a lot lately.

Sorry no, Sorry!
Have a look at these other threads:
http://discussions.apple.com/thread.jspa?messageID=2614499&#2614499
http://discussions.apple.com/thread.jspa?messageID=2407649&#2407649
http://discussions.apple.com/thread.jspa?messageID=5325737&#5325737
http://discussions.apple.com/thread.jspa?messageID=4457343&#4457343
Dennis

Do I need to use all the hard drive for time machine or can I partition it

Do I need to use all the hard drive for time machine or can I partition it

You cannot partition a TC disk.
See pondini about mixing data and backups.. but remember this.. the TC has no way to back itself up and TM cannot backup files on the TC. Anything not backed up on the TC will be lost at some future point.
http://pondini.org/TM/TCQ3.html

HT201342 Can is use both the @icloud and @me email addresses?

Can is use both the @icloud and @me email addresses?

Yes, your previous @me email will continue to function as before.

Problem after upgrade a PRIME-NCS-APL-K9 from version 1.1.0.58 to Prime Infrastructure 1.2

I have upgraded a PRIME-NCS-APL-K9 from version 1.1.0.58 to Prime Infrastructure 1.2
First I have installed the Path "ncs_patch-1.1.0.58-upgrade-pi_1.2.tar.gz" and then the
"PI-upgrade-bundle-1.2.0.103.tar.gz".
after the upgade I have got the Message "Upgrade Successful".
Now when I start the NCS i get the following error message
egghead/admin# ncs start
Starting Network Control System...
Unable to verify hardware.
This may take a few minutes...
Health Monitor is already running.
Failure during Network Control System startup. Check launchout.log for details.
In the launchout.log are this messages:
Starting Health Monitor as a primary
Checking for Port 8082 availability... OK
truststore used is /opt/CSCOlumos/conf/truststore
truststore used is /opt/CSCOlumos/conf/truststore
Starting Health Montior Web Server...
Health Monitor Web Server Started.
Starting Health Monitor Server...
Health Monitor Server Started.
Starting Remoting Service: Reporting Server
Checking for running servers.
00:00 Check complete. No servers running.
Starting Server ...
Starting Remoting Service: Reporting Server
The Report Server startup script is already running waiting for report server to start
Starting Remoting Service: Reporting Server
The Report Server startup script is already running waiting for report server to start
Starting Remoting Service: Reporting Server
The Report Server startup script is already running waiting for report server to start
Starting Remoting Service: Reporting Server
The Report Server startup script is already running waiting for report server to start
have anyone an idea whats wrong?
thank you for your help
Kurt

i have the same problem
NCS/admin# ncs status
Health Monitor Server is starting.
Reporting Server is Starting
Ftp Server is running
Database server is running
Tftp Server is running
Matlab Server is running
NMS Server is stopped.
SAM Daemon is running ...
DA Daemon is running ...
Syslog Daemon is running ...
status
I try it
To get it back up and running do the following from the CLI.
1. Stop the NCS
2. Run 'ncs db reinitdb'
3. Start the NCS
but the status is the same

Can PRIME-NCS-APL-K9 upgraded from 2.0 to 2.2

Dears,
I have Cisco prime infrastructure Appliance "PRIME-NCS-APL-K9 " use this version 2.0.0.0.294 and have the following spec.
Total RAM Memory: 16278820 kB
CPU Core Count: 16
Disk 0: Capacity: 437.90 GB
can i upgrade it from 2.0.0.0.294 to CPI 2.2
Waiting your feedback plz.
Regards,

Users deploying the Prime Infrastructure physical appliance can choose from the Gen 1 or Gen 2 options shown in Table 2. The The Gen 1 and Gen 2 physical appliance capacities match those of the virtual appliance Standard and Professional options, respectively.
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-2/quickstart/guide/cpi_qsg.html#53444
Table 2 Prime Infrastructure Physical Appliance Options
Physical Appliance Options
2.X Option
Gen 1
Gen 2 3
Appliance Image Format
Bare Metal/ISO
Bare Metal/ISO
Equivalent 1.x Option
Physical Appliance
Physical Appliance
Hardware Specifications
CPU (cores/threads)
8 C/16 T
10 C/20 T
Memory
16 GB
64 GB
Disk Capacity
4x300 GB
4x900 GB
RAID Level
RAID 5
RAID 10
Disk I/O Speed
200 MBps
200 MBps

Need to use both the ports of PRIME-NCS-APL-K9

Similar Messages

Maybe you are looking for