Need to use hyperlink with tracking code in Edge project, not working

I have been using test URL's inserted on invisible "hot spot" elements in my edge animate project that have been opening fine in the browser. Now I need to update those URLs with tracking syntax, but when I change it in Edge (replace the URL in the actions panel for that element) and then run the animation in the browser, the link will not open.
Any thoughts or suggestions?

Never mind, the URL itself had quotation marks that needed to be removed; once that was done the URL's opened properly.

Similar Messages

  • What's with Tracked Packet & Paypal Labels - still not working properly?

    This is probably an old refrain, but honestly, how many months/years has it been since Tracked Packet was added to Paypal labelling, and it seems it's still not working 100% correctly.  Case in point: I rarely use TP, but when I tried to change my listing's shipping type from Small Packet to TP yesterday while preparing a label, I got an error message saying the information was incorrect and I couldn't complete the process with TP.  I used the back button, tried inputting the details again, still no go.  Finally, I decided to back out completely, return to the Paypal transaction page and start all over.  This time I was able to get the label done.  So it seems that if any other shipping type is input first, you can't change your mind and switch to TP during the process. This has never been a problem with Expedited Parcel or with Xpresspost -- you can input the details, check pricing, then return and change the shipping type as many times as desired.  I'm wondering if the problem is me and/or my browser (again??), or does anyone else experience this annoying glitch?  BTW, Tracked Packet is an air service, right?  If not, I may be in trouble.  I ask this because I see the estimated delivery time is from 4 to 15 days -- quite a spread for TP U.S.A.

    Tracked Packet has always done the error since it was introduced. If another shipping option is used when you go to PayPal shipping from eBay, switching to Tracked Packet does not reset the form from the service that you came into. You cannot see anything but the form has not been reset. To get around this is simple.  You need to reset the form. A trick to do this is to go to the Service Type entry box, select "Select Type" as the service and click "Continue" at the bottom of the page. This will generate an error message at the top saying to "Please enter a valid service type."  This resets the form to the starter defaults and now you can select the Tracked Packet service. All the information that was entered will not be lost. I posted this solution way back when this "glitch" was first mentioned years ago when Tracked Packet was introduced. It was sent to kalvin at the time but he left eBay and it was never fixed. It is hard to get things fixed on eBay.ca Canada but it seems impossible to get anything fixed on PayPal shipping for Canada Post shipping issues.

  • HT204380 help. tried for first time to use FaceTime with another iPhone user & it would not work. "FaceTime failed". we are both on wi-fi networks & iTunes accounts are set up correctly.

    help. tried for first time to use FaceTime with another iPhone user & call refused to connect. Call would dial, allow us to accept call, then error message "FaceTime failed" would appear & call disconnect. we are both on wi-fi networks, both phones have updated software & both enabled FaceTime with iTunes logged in. don't know what else to do to get FaceTime to connect. Someone please help.

    Thanks Helen for the response. At least you can get some of the contacts to work. Absolutely none of mine will. Feel like my phone is cheating me out something it should do. Think I'm going to just have to dump all the Apple products in general because this phone hasn't worked right since I got it.

  • I need to use agilent34970A with serial cable;but i'm not able to build a routine.

    Hi, i'm learning labview and i'm not able to build a routine to communicate with my Agilent34970A with serial cable only and to use the data. Anyone can help me? thanks. lucky

    Are you using the driver from the LabVIEW Instrument Driver CD or that you downloaded from here? If you are, what problems are you having? Are there error codes generated and what are they? Have you verified that the serial cable is correct and the the comm parameters (baud rate, stop bits, etc.) are the same in the program and the instrument?

  • Hyperlink with tracking applied does not work in PDF

    We use lots of web addresses in our advertising and generally the web addresses automatically convert to hyperlinks when we distill the files and make PDFs. Recently we've had two instances where someone applied tracking or justification to the line of text containing the url to make it spread across the page. When we make our PDF the url is not clickable. Is there anyway around this? We tried actually creating a hyperlink manually in InDesign by using the Hyperlinks panel and entering the address, but that didn't work either.

    Peter,
    We'll look into that. We already do two separate PDFs for print and web, but
    we are distilling both right now. Wouldn't be too much of a problem to
    change to exporting the web version I don't think.
    I did a test, just curious, is there a way to keep it from putting a black
    box around the link on the PDF?
    Thanks for your help! We appreciate it!
    Beth
    From: Peter Spier <[email protected]>
    Reply-To: <[email protected]>
    Date: Fri, 14 May 2010 13:24:04 -0600
    To: Beth Phillips <[email protected]>
    Subject: Hyperlink with tracking applied does not work in PDF
    Distilled PDF uses Postscript which does not support hyperlinks and
    interactivity. To make your hyperlinks in ID you'll need to export and check
    the Include Hyperlinks and Include Interactiviity boxes.
    Your printer doesn't need hyperlinks because they don't work on a printed
    page. The requirements for print and interactive PDF are quite different, and
    you may find you need to make two versions.
    >

  • When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    Hi Brian,
    Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
    Thanks for your help though!
    Pernille

  • My desktop IMac OSX 10.6.8 : IMovie '11: Trying to upload a home movie clip from my Panosonic camera model PV-DV203D. I've had this camera several years, and used it with Windows desktop. Now trying to work with my Mac. I have a USB cable, both ends fit,

    My desktop IMac OSX 10.6.8 : IMovie '11: Trying to upload a home movie clip from my Panosonic camera model PV-DV203D. I've had this camera several years, and used it with Windows desktop. Now trying to work with my Mac. I have a USB cable, both ends fit, but iMovie '11 does not recognize it. Is there a driver fix for this?

    What kind of Mac to you have?  This camera is a tape based DV one that connects best with firewire and I cannot tell if your Mac has firewire.  If your mac *does* have firewire, get a camcorder firewire cable and try again.
    ETA:  Oops, I am pretty sure that all the "desktop iMacs" have firewire, so you should be good to go.  You will probably need a cord that goes from FW800 to your camcorder.

  • HT201210 No matter what i Do it comes up with error code 9 and wil not even find the Iphone 3GS 16GB ....What to do ??

    No matter what i Do it comes up with error code 9 and wil not even find the Iphone 3GS 16GB ....What to do ??
    The Home and Sleep buttom does only promt the Connect to itunes...
    Have closed down anti V and is admin and so on.....
    Regards Martin

    Hello mftoby,
    Error 9 occurs when the device unexpectedly loses its USB connection with iTunes.
    This issue can usually be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    iOS: Troubleshooting USB connection
    http://support.apple.com/kb/TS1286
    iTunes: Troubleshooting security software issues
    http://support.apple.com/kb/TS3125
    Note: For best results and the fastest resolution, it may be best to try the restore on a different computer. This will help isolate if it is an issue with the device or the computer itself.
    Thanks,
    Matt M.

  • HT1212 Brought iPod 4 for Daughter, she put on Passcode and she can't remember it, the ipod is saying "ipod is disabled" connect to itunes. Connented to iTunes come up with need to put passcode. The on/off button does not work, can't turn off and hold hom

    Brought iPod 4 for Daughter, she put on Passcode and she can't remember it, the ipod is saying "ipod is disabled" connect to itunes. Connented to iTunes come up with need to put passcode. The on/off button does not work, can't turn off and hold home button to reset please help.

    Place the iPod in recovery mode using one of these programs and then restore via iTunes:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • I am trying to use livetype with persian alphabet and it doesn't work. what should I do?

    I am trying to use livetype with persian alphabet and it doesn't work. what should I do?

    There is no more LiveType with Motion 5.  You may want to go to the Final Cut Express forum, as that's the only place it's existed for the last few years.

  • The message function on my Ipad just quit working.  I was using it while in Mexico and it just quit.  I have come home and synced my Ipad with Itunes and function still does not work.  How do I get this function to work again?

    The message function on my Ipad just quit working.  I was using it while in Mexico and it just quit.  I have come home and synced my Ipad with Itunes and function still does not work.  How do I get this function to work again?

    When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive.  It would be a few months old so it wouldn't have the complete library on it....any ideas?  I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

  • HT201365 hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me

    hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade etc but none work plz say what i do if u find some solution tham msg me on [email protected]

    First, we're not Apple here (Apple does not participate in this forum).  We're only users like you.
    The previous owner has not given you the correct ID and password for you to use.
    If the iphone has iOS version 7, then read through the following...
    http://support.apple.com/kb/HT5818

  • Hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade

    hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade etc but none work plz say what i do if u find some solution tham msg me on
    iPhone 4S

    oenkz33 wrote:
    this does not help at all for the second owner, after making the first owner id with careless, sorry for my english ...
    Careless? Possible, but unlikely. Most likely the phone was stolen from the first owner. It would be a VERY careless iPhone owner who did not erase their personal information from a phone before selling it, and to do that it is necessary to disable Activation Lock. In most places in the world knowingly using stolen property is a crime, so the fact that the phone doesn't work may be the least of one's risks.

  • Hi my name is Vajra from INDIA, i am using ipod shuffle 3rd generation but it is not working properly due to battery problem, i need to change the battery please guide me how to change the battery or any chance to replace the ipod shuffle 3rd generation ?

    Hi my name is Vajra from INDIA, i am using ipod shuffle 3rd generation but it is not working properly due to battery problem, i need to change the battery please guide me how to change the battery or any chance to replace the ipod shuffle 3rd generation ?

    Seems no one care about us .no one replied till no@!!!!@ strange

  • Is there a way that when using airplay with power point the ATV does not sleep/screen saver frequently

    s there a way that when using airplay with power point the ATV does not sleep/screen saver frequently???

    I have done this for several Titles, using Photoshop and a Layer Mask, that gets "erased," revealing the letters. My Titles were of "handwriting with chalk" on a blackboard, so I could keep the edge of that Layer Mask, looking more like the "chalk." Photoshop also makes it easy to output Layer Comps for each "step" in the handwriting process. IIRC, I did about 5 Frames per Layer Comp on Import, but do not recall if I used an extremely short Cross-Dissolve Transition between those - I intened to do so, but just do not remember if I liked that, or went with just the Still Images? Will try to find that animation, and maybe create a full tutorial of the process. In my case, I also added an SFX of chalk on a chalkboard.
    If you have Photoshop, it's really quite easy to pull off.
    Now, I do not know if Photoshop Elements has Layer Masks yet, which make it so very easy to accomplish. One could do it backward, where the Text Layer gets Erased, and then one would have their full Image as the last in the sequence, and then the next would have a little bit of the Text removed, then a bit more, then a bit more - going backward, until the "writing surface" is clean. One could also do this with a Transparent Background, so that one saw the Video below, and no actual "writing surface" visible.
    Good luck,
    Hunt

Maybe you are looking for