Need to use iSight as full-screen 'webcam' for play - Quickly!

We're doing a production on Internet safety for children, and we need an actor to be shown on large monitors, speaking and interacting with the cast in real time. Is there any way of using the iSight camera for this? iChat needs an account (and shows the OTHER person!) iMovie shows all the clips areas while the camera is on. We need, basically to have just the actor's face showing, so the MacBook is working as a camera. Oh - photobooth also doesn't show full screen till after the camera is off.
Any ideas from you illustrious folk?
I'll try the video forum too.
Thanks, in panicked advance.

Hi again,
I have found this:
http://chrisp.de/monitormode/
Which is fantastic, and does what it says on the tin.
Cheers,
d

Similar Messages

  • How to use the set full screen mode ?

    hai...i' a newbie ..i hav one question ...how to use the set full screen mode for my application..
    i found.
    public void setfullscreenmode (boolean mode)
    but when try in my application it error and other
    canvas.setfullscreenmode(true);
    actually i don't know where i should put this code

    i also found the coding it use like
    setFullScreenMode (true);
    but when i apply it ..it error because cannot resolve the symbol.
    my question is which one i should use; declare the
    public void setFullScreenMode (boolean mode);
    first or use
    setFullScreenMode (true) ;
    or other way ..what i need to do to use setFullScreenMode

  • I selected full screen how do i undo it the tab that i used to make full screen isnt there now

    i selected full screen how do i undo it the tab that i used to make full screen isnt there now

    The F11 key will toggle Full Screen Mode on or off
    *See --> http://kb.mozillazine.org/Netbooks#Full_screen
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • When i open entourage mail my view used to be full screen now its half screen and i have to maximize now how do i fix this

    when i open entourage mail it use to be full screen and now its half screen so now i have to hit the maximize button how do i fix this

    Click on the green button.  Or you adjust from the bottom right to fill the window.   With Mac OS X 10.7 or later, you can adjust from any of the window edges.  Only upgrade to 10.7 or later if you have read this tip:
    https://discussions.apple.com/docs/DOC-6271

  • X6 full screen handwriting for Chinese language do...

    I bought Nokia X6 in Hong Kong 2 months ago, at that time I can use full screen handwriting for Chinese language. But after updating the SW I'm no longer able to use Chinese handwriting input.
    Help me please to offer me some advices on how to solve this problem, thanks in advance.

    I think you need to find a Chinese font that works when you install it into your operating system... not all fonts are created equal, and not all fonts work... I don't use Chinese, so can only suggest using Google to search for a font that works with your Mac

  • Here is how to enable full screen mode for AIR Mac Desktop Apps

    I just discovered that with a very simple native extension method, I can enable full screen mode for AIR Mac Desktop Applications.
    This gets you the full screen icon in the top right, and it works perfectly with no changes to my code. (Obviously only works on Lion and above, since this is a Lion feature)
    Enjoy.
    Here's the code:
        FREObject _EnableFullScreenMode(FREContext ctx, void* functionData, uint32_t argc, FREObject argv[])
            //We should be okay to do this, even on 10.6, according to this post:
            //http://www.cocoabuilder.com/archive/cocoa/311124-implementing-full-screen-for-10-7-but-app-should-also-run-on-10-6.html
            //We can't use [NSApp mainWindow] - didn't appear to work
            //This seems to though:
            NSArray * allWindows = [NSApp windows];
            if (allWindows.count > 0)
                NSWindow *mainWindow = [allWindows  objectAtIndex: 0];
                NSWindowCollectionBehavior behavior = [mainWindow collectionBehavior];
                behavior |= NSWindowCollectionBehaviorFullScreenPrimary;
                [mainWindow setCollectionBehavior:behavior];
            //TODO: Return a boolean instead depending on if we found the main window
            return NULL;

    Press Control + Command + F on your keyboard to enter or exit full screen mode.

  • Full screen picture for contacts

    I have recently upgrade to the iphone 5. I use MS Exchange to sync contacts and email. I want to have full screen picture for caller ID but it only gives me a thumbnail. Any suggestions to get full screen picture for caller ID?

    It used to be that if you assigned the picture while on the phone, it was full screen. I remember reading around iOS 5 I believe that it only allowed for full screen, but I still have a couple that are only thumbnails that have been synced over from contacts in LinkedIn. Try assigning the picture from the phone itself and see if that changes it.

  • Full Screen Wallpaper For Nokia N79

    Hi All,
       How to set Full screen wallpaper for Nokia S60 v3 FP2 Device.Searching for this software since Long time.

    Already Used That one....
    There are lot many options other than that in that.Bit confused with that
    I installed Signed Fullscreen wallpaper .it was installed successfully.But When selecting wallper it is telling "Unable to execute Due to securtiy reasons".Its working in Fp1 devices but not with Fp2
    even with very low end phones Full scrren wallpaper is working.But y not with Nokia?

  • Can't get a full screen display for keynote or movies.

    The deck or movie only displays a smaller section on the center of the screen with a thick black border. It used to display full screen, I don't know when it changed.

    Hi Mary,
    I don't remember those arrows in 10.6, only 10.7 & up!?
    I have 10.6.8, as you do. To make your Safari full screen, make sure you have the left hand side of your safari page moved  all the way to the left.  Then move your cursor to the BOTTOM RIGHT CORNER of the safari page, and simply drag your page towards the lower right hand corner of the screen. NOTE: you will see a series of lines on the bottom right corner of the page, indicating where to place you cursor arrow.
    By wuzradioman here...
    https://discussions.apple.com/thread/4218928?start=0&tstart=0

  • Sometimes when i get out of the full screen option for a microsoft word document i lose my main toolbar (the toolbar with the minimize and escape buttons, etc. etc.)

    Sometimes when i get out of the full screen option for a microsoft word document i lose my main toolbar (the toolbar with the minimize and escape buttons, etc. etc.)??

    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro 
    https://discussions.apple.com/community/mac_os?view=discussions
    http://www.apple.com/support/macbookpro

  • Bring back full screen pictures for incoming calls

    Bring back full screen pictures for incoming calls in the new update !!!!

    Feedback to Apple does not go here, it goes here: www.apple.com/feedback and click on the appropriate link.
    This is a user to user forum.

  • Why have apple taken away the full screen photo for calls?

    Why have apple taken away the full screen photo for calls?

    There is plenty of discussion about this here:
    https://discussions.apple.com/message/25125511#25125511

  • Lots of hang ups when using iPhoto in full screen mode

    Has anyone else got this problem or a solution? I find that iPhoto hangs up or give strange action when in ful screen mode. The other day, for example, I had two iPhoto windows showing, one in full screen and one normal window on the desk top! Another day the system became unresposive and I had to force quit iPhoto to get it back. Another day I had to re-boot the machine entirely. All other full screen apps work fine.
    I am on MacBook black, 2GB memory. OS X Lion fully updated.

    Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
    (On 10.7: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
    (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    What's the plist file?
    For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

  • How to use mac's full screen functionality with Adobe acrobat XI?

    I recently switched to mac, so font have  much experience with this.
    My adobe reader is missing mac's full screen functionality (the two arrows on right that make mac fullscreen).
    so, if i have three pdfs open, i cannot switch between them using the 4 finger swipe..
    Please note that this is different from the adobe functionality (command + L) which allows it to become fullscreen, but it still occupies the desktop and so, i cannot swipe between different pdfs.
    Thank you!

    Nope that is just the way it is with Mac OS X and the way Apple has setup the dual screen system.

  • Using swing in Full screen sxclusive mode

    Hi!
    I have created a game which uses swing components.... I have decieded (because it is much cool, and looks nicer) to convert the game to Full screen mode....
    Mycurrent GUI consists of two JPanel s. One of which I use the paintComponent method to draw the game board to the JPanel. The other JPanel is split into several other parts which contain the details about each player.
    Now, what I want to do is to be able to update the graphics using a BufferStrategy. My question is how would I do this? I tried to create a eperate BufferStrategy for the "Board" JPanel, but I can't as JPanel doesn't support getBufferStrategy(). Then I tried to convert the whole "Board" into Canvas. This I could implemnt but as I rendered the image it was drawn over the second JPanel which is to the right of the "Board"
    I was thinking that maybe I could create a FlipBufferStrategy but it's protected and cannot be instantiated in a JPanel.
    So what I'm basically asking is how do you use swing components in Full Screen Exclusive mode and using active rendering?
    For dukes go to http://forum.java.sun.com/thread.jsp?forum=57&thread=394856&tstart=15&trange=15

    Hi,
    in case you don't already know it, here's Suns very own tutorial on that topic:
    http://java.sun.com/docs/books/tutorial/extra/fullscreen/index.html
    JPanel does not support getBufferStrategy() but JFrame (or any other subclass of Window) does. So you could put your JPanel into a JFrame and gain access to the BufferStrategy that way.
    Keep in mind that there is still a serious bug in createBufferStrategy() that can result in a deadlock. Browse the Bug Database for a workaround, I can't find it now, but I know that it is there.
    Last but not least you could post in the Swing Forum, which would be a more suitable place for a Swing question than the Java3D Forum :)
    Regards
    Fleischer

Maybe you are looking for