Need to use Select List value as column name

I want to have a WHERE ? IS BETWEEN ? AND ? clause.
I am using the PL/SQL Query returning a SQL Query as a report. This uses bind variables for items I had set on my form..... If I hardcode something like:
'WHERE STARTDATE IS BETWEEN '||
'TO_DATE(:P1_START,''dd-MON-YYYY HH24:MI'') AND '||
'TO_DATE(:P2_END,''dd-MON-YYYY HH24:MI'')';
I have no problem, but I have 2 date columns, STARTDATE and ENDDATE, and would like to use the value in a select list and not have to hardcode "STARTDATE" in there. I have not been able to do this, does anyone know how to use a bind variable as a column name? From reading some posts I think it might not be possible.

Heather,
You're on the right track, just glue in the column name so that it becomes part of the returned query string from the function (...'WHERE '||:COLNAME||' IS BETWEEN '|| ...).
Note that the bind variable is not part of the returned query string, but the column name obtained from the bind variable when the function executes does become part of the query string.
Scott

Similar Messages

Using select list value as column name in SQL

Folks,
Thanks in advance for any help with this
I have a select list with two values (Instance and Username) created by
STATIC2:Username;USERNAME,Instance;INSTANCE
I am trying to pass the value of this (:P2_SELECT) and use it as a column name in a SQL query as below
select USERNAME,
INSTANCE
from table_name
where :P2_SELECT like '%'||:P2_TEXTSEARCH||'%'
When I substitue the :P2_SELECT for one of the values (either instance or username) this works fine
I suspect it is due to how Application Express interprets the value of :P2_SELECT
Any help would be much appreciated!
Gareth

Thanks Munky that worked a treat!
The next hurdle I have now is that because I have changed the region type to "PL/SQL Function(returning SQL Query)" there is no longer the option to add sorting to the columns as I have had to change the Source option to "Use Generic Column Names (parse query at runtime only)"
I will have a scout around and see how I can get around this
Gareth

Using Select List value for building report

I have an interactive report form. I have a "After Header" (LOAD) process that run sql commands that will populate a table with the data that the report needs for a given week.
I have a Select List item that is run as a "Before Header" that gets a list of dates from a table. The dates only contain the first day of the week for the past two years. It is called "WEEK_OF" table and the column is called "WEEK_OF_DATE".
The default value for the Select List is the first day of the current week. And then all of the first day of the week from the WEEK_OF table.
I would like the LOAD process to use the value in the Select List. So at start up I would like the List to show the current week and report to begin with data from the current week.
So I have tried to use the variable :WEEK_OF_DATE (Item name) as the beginning date for the report. However :WEEK_OF_DATE is null.
Also, after I have the report displayed, I would like to select a new date from the list and have the report automatically refresh with that new data.
Any Ideas what I am doing wrong?

Hi Lyle,
When setting a default value for a select list that is to be used to filter a report, I have found it best to do that using a computation, conditional on the item being NULL and running Before Header. If other computations rely on this value, then it should have the lowest sequence number to ensure that the value is available for those.
Andy

Refresh PL/SQL Report Region (not Page) using Select List value

Hi,
I've got a report region based on a 'PL/SQL function body returning a SQL query'which gets generated on selecting a value from a Select list item, The Select List action is 'Redirect and Set value' but this causes the whole page to refresh rather than just the report region. I've tried to refresh the report only using a dynamic action on the Select List item (Action now reset to 'None') but now the report is not appearing on choosing from the List. Can anyone suggest a solution that will allow me to refresh this report without refreshing the page? I am using APEX 4.2.2 and the report syntax is as follows:
DECLARE
v_statement VARCHAR2(500);
BEGIN
SELECT query_text
    INTO v_statement
   FROM sql_queries
   WHERE query_id = :P2_QUERY ;
   RETURN v_statement ;
END ;
where P2_QUERY is Select List Item,
regards,
Kevin.

KevinFitz wrote:
The report region being displayed is conditional on P2_QUERY item being NOT NULL. I assume the region not appearing is because the Action for the Select List Item is set to None and so P2_QUERY is always NULL.
No, the region is not appearing because it is conditional on P2_QUERY being NOT NULL. This means that the report region never exists on the page shown in the browser, so it can't be dynamically refreshed. (Dynamic refresh doesn't evaluate region conditions, and it only re-renders the report content, not the entire region.)
Remove the condition on the report region, check the refresh is working, then reconsider exactly what the requirements here are. If you want the region to appear only when P2_QUERY has a value, and you want it to be refreshed without submitting and re-rendering the page, then the region needs to be hidden rather than conditionally rendered, and shown via a dynamic action when P2_QUERY gets a value.
I tried adding an additional Set Value True Action for the DA event but got an error as listed above,
All irrelevant if Page Items to Submit on the region is used properly.

Using select list as default value in tabular form.

Hi,
I am using Application Express 4.1.0.00.32. I have two questions that are related.
I have a Select item *'P1_SELECT'* and a tabular form My Items.
Question 1. The My Items tabular form col1 Attributes are set Display As Text Field, and the Tabular Form Attributes are set Default Type = item(application or page item name), Default = P1_SELECT. I have checked the session state value is set on P1_SELECT ie. Fred. What I need to know is, why, when adding a row to the tabular form My Items does col1 not display 'Fred' as the default value from the select item P1_SELECT? I can change col1 of the Tabular form to be Display as Text (save state) and this will work. However that leads me on to:
Question 2. After adding say 3 rows to the form, I then change the select P1_SELECT value to Bob and Bob is now set in session state on the P1_SELECT item, but when I again add row to the form the value Fred is still the value not Bob. It seems that the tabular form keeps the default value as Fred and not Bob. How can I get this to look or work like:
col1_
Fred
Fred
Fred
Bob
Your help is needed.
Thanks.

Howard (DBA in Training) wrote:
Do you submit the page or set the value after changing the selection? If not, the display value seems to be Bob but the working value is still Fred. That's what you are seeing right? In the "Settings" section, what do you have for "Page Action when Value Changed". I've been using "Redirect and Set Value" because I was staying on the same page after the selection.
Additional info which might be helpful (or NOT). ====================
NOTE: I am just a novice's novice with APEX and I had much agony with Select Lists. It was challenging to have the Select List value displayed because there seem to be so many different sources of the Select List value, namely:
1) the current value in the session state
2) the value you can specify in "Source value or expression" in the "Source" section of the Select List item
3) the value you can specify in the "Post Calculation Compution" in the "Source" section of the Select List item
4) the value you can specify in the "Default value" of the "Default" section of the Select List item
[Now, if I've misdescribed any of these, remember, this is from a novice's perspective.]
It's like putting a clock (back) together. Get any of the pieces wrong and it will probably not work right.
I had an addiitonal challenge in that I wanted the same Select List displayed on multiple pages and for the currently selected value (from the former page) to already be set on the new page when it was displayed. What fun!
To see what I did here: http://apex.oracle.com/pls/apex/f?p=43250:101 login Dever/Ima9Dever
Remember, I'm doing many things you will likely not need to do. I iniitalized the Select List for the first time it displayed. I copied the Select List value from old page to new page by storing it in an application item F217_SYS_NIC_NM.
Best wishes,
HowardHi Howard,
You don't have submit the page for just setting one item's session state. you can use a Dynamic Action OR use Page Items to Submit property if available (this is available in various places such as sql region,chart region etc)
In context to this question you don't have to do any of those..just see my example above
Thanks

Alternate select lists on 2 columns and return more than 1 column

Hi,
I try to build 2 alternate select lists and each select list should return more than 1 column
2 Columns PART_ID and PART_SPECIFICATION
Now I build a select list on PART_ID like
select part_id d,part_id r from parts;
The result should be:
Column PART_ID has PART_ID and PART_SPECIFICATION must be text of PART_SPECIFICATION
The other select list based on PART_SPECIFICATION should be like
select part_specification d,part_id r from parts;
Now it should be displayed part_specification in PART_SPECIFICATION and part_id in PART_ID.
This is because one user knows the part_id and another knows only the specification
Please help me
Siegwin

Hi Siegwin,
Check your application Page 7(copy of page 500) using select list instead of plugin, it gives all values.
and works very well,
use ajax process to get Xml data into page items
following are changes
application process: getData
application item : TEMPORARY_APPLICATION_ITEM
create one function in page html header pull_multi_value()
and it call on page item p7_empno on html form element attribute as onchange="pull_multi_value(this.value)";
this may Helps you,
Pars.

CPY-0007: Select list has fewer columns than destination table

hello, I need your help, here is my problem is summarized in my example below
Exemple
SQL> copy from XX/X@BD1 to YY/Y@BD2 insert TABL1(COL1,COL2)-
using select COL1,COL2 from TABL1
Array fetch/bind size is 15. (arraysize is 15)
Will commit when done. (copycommit is 0)
Maximum long size is 80. (long is 80)
CPY-0007: Select list has fewer columns than destination table
DESC TABL 1
COL1, COL2 DESC
thank u.

bahan wrote:
hello, I need your help, here is my problem is summarized in my example below
Exemple
SQL> copy from XX/X@BD1 to YY/Y@BD2 insert TABL1(COL1,COL2)-
using select COL1,COL2 from TABL1
Array fetch/bind size is 15. (arraysize is 15)
Will commit when done. (copycommit is 0)
Maximum long size is 80. (long is 80)
CPY-0007: Select list has fewer columns than destination table
DESC TABL 1
COL1, COL2 DESC
thank u.
00007,0, "Select list has fewer columns than destination table\n"
// *Cause: On an APPEND operation or INSERT (when the table
//          exists), the number of columns in the SELECT
//          command is less than the number of columns in the
//          destination table.
// *Action: Re-specify the COPY command, making sure that the
//          number of columns being selected agrees with the
//          number in the destination table.

Tranferring on "select list" value to another "select list" value

We have a drill through feature in our application where the user clicks on a value on page 1 and is taken to page 2. (e.g. the user drills on EUROPE in the REGION column on page 1 and is taken to page 2 where they see a report by countries in EUROPE.)
We also have identical SELECT LISTS on page 1 and on page 2 for REGION (EUROPE, NORTH AMERICA, ASIA). How do we program our application so that when the user clicks on EUROPE on page 1 and is taken to page 2 the value of EUROPE from the REGION SELECT LIST on page 1 is chosen in the REGION SELECT LIST on page 2?
We tried embedding this in the url for the drill through but the REGION SELECT LIST value on page 2 didn't change.
In the below link shouldn't the value of the REGION SELECT LIST named P2_REGION be assigned the current value of the REGION SELECT LIST called P1_REGION? (in this case 'EUROPE')
Thanks for help on this. John Wisnieff
f?p=&APP_ID.:102:#APP_SESSION#::::P102_PRG1_LINK:#P1CAMP_NAME#,P2_REGION:&P1_REGION

It would be great to get quick reply on this as we have a project due soon. I just need an answer to the below question:
In the below link shouldn't the value of the REGION SELECT LIST named P2_REGION be assigned the current value of the REGION SELECT LIST called P1_REGION? (in this case the value is 'EUROPE')
f?p=&APP_ID.:102:#APP_SESSION#::::P102_PRG1_LINK:#P1CAMP_NAME#,P2_REGION:&P1_REGION

Pass Select list value to URL as a parameter

I am trying to pass the selected value from a select list via a button to a URL.
&P_VALUE=&P_VALUE.
P_VALUE is set to USER SESSION.
It shows as prevous session value. If I show the the session value is not set to the selected value.
If I call a PDF report via a button, it displays the correct value and the session values is correct.
If I select the button for the URL again, is shows the previous value.
When I go back to the form and call select the button again, the correct parameter is passed to the URL.
Any Ideas?
Thanks,
Jerry

If you use substitution at the time, the button gets generated, you don't have the new value - the button is generated with the rest of the page, and then later the user changes value of the select list. You have two choices:
1)Use Select list with submit - and transfer the user to second page using branch (which get's calculated after submit when select list has already the new value)
2)Use Javascript to catch the onChange/onClick event of SelectList, read the current value and do the redirect from JavaScript.

Refresh classic report based on select list value selected

hello,
can anyone please help me out with this issue. I have a parameterized classic report based on a select list and I want to refresh this report whenever the select list value is changed. I am using oracle apex version 3.2. i just want to have a javascript function onchange event for the select list which refreshes my report whenever a value is selected.
My select list item is p1_datastore
select distinct datastore d,datastore r from my_table1 order by 1;
My classic report query is
select * from my_table2 where datastore = :p1_datastore order by last_updated_dt desc;
****************************************************thanks,
orton

can anyone please help me out with this issue.
thanks,
orton

Creating Select List with multiple columns

I want to create a select list with multiple columns. I followed the demo application model described in the by Denes Kubicek (Currently my reference for APEX !!)
The code is as follows:
CREATE OR REPLACE FUNCTION getcrops(p_cropid IN NUMBER)
RETURN VARCHAR2
IS
v_cropid VARCHAR2 (400);
v_fcode VARCHAR2 (400);
v_product VARCHAR2 (400);
v_var VARCHAR2 (400);
v_fname VARCHAR2 (400);
v_acres VARCHAR2 (400);
v_style_start VARCHAR2 (400);
v_style_end VARCHAR2 (400);
v_return VARCHAR2 (400);
BEGIN
FOR c IN (select "CROP"."CROPID" as "CROP ID",
     "CROP"."FIELDCODE" as "FIELD CODE",
     "CARROTPRODUCTLIST"."CARROTPRODUCTNAME" as "PRODUCT",
     "VARIETYLIST"."VARIETYNAME" as "VARIETY",
     "FIELD"."FIELDNAME" as "FIELD NAME",
     "CROP"."SIZEINACRES" as "ACRES"
from     "FIELD" "FIELD",
     "CARROTPRODUCTLIST" "CARROTPRODUCTLIST",
     "VARIETYLIST" "VARIETYLIST",
     "CROP" "CROP"
where "CROP"."CARROTPRODUCTTYPE"="CARROTPRODUCTLIST"."CARROTPRODUCTID"
and     "CROP"."VARIETYID"="VARIETYLIST"."VARIETYLISTID"
and     "CROP"."FIELDID"="FIELD"."FIELDID")
LOOP
v_cropid := TO_CHAR (c.'CROP ID', 'FML999G999G999G999G990');
v_fcode := c.'FIELD CODE';
v_product := c.'PRODUCT';
v_var := c.'VARIETY';
v_fname :=c.'FIELD NAME';
v_acres :=c.'ACRES';
FOR i IN 1 .. 12 - LENGTH (c."CROP ID")
LOOP
v_cropid := v_cropid || ' ';
END LOOP;
FOR i IN 1 .. 12 - LENGTH (c.'FIELD CODE')
LOOP
v_fcode := v_fcode || ' ';
END LOOP;
FOR i IN 1 .. 12 - LENGTH (c.'PRODUCT')
LOOP
v_product := v_product || ' ';
END LOOP;
FOR i IN 1 .. 12 - LENGTH (c.'VARIETY')
LOOP
v_var := v_var || ' ';
END LOOP;
FOR i IN 1 .. 12 - LENGTH (c.'FIELD NAME')
LOOP
v_fname := v_fname || ' ';
END LOOP;
FOR i IN 1 .. 12 - LENGTH (c.'ACRES')
LOOP
v_acres := v_acres || ' ';
END LOOP;
v_return := v_cropid || v_fcode || v_product || v_var || v_fname || v_acres;
END LOOP;
RETURN v_return;
END;
I created this anonymous Pl/SQL function at a application level ..Then I followed up to create a select list with a function inside. However I could not create select list with the command suggested in the demo which is
select getcrops(cropid) d, cropid r from crop;
APEX (2.1) returns a error message. What am I missing ? Should the function be called from somewhere else after creating a regular select list..? Where the functions (Pl/SQL) should be ideally stored for application level access..? and for across application level access ? How can I check the function works good. Help is appreciated.

Still really one column.
If they need to be independent then you've got to have three selection lists.
%

Selection list with multiple columns

How can i create a selection list with multiple columns?

Still really one column.
If they need to be independent then you've got to have three selection lists.
%

Select list with multiple columns

I want to create a select list with multiple column option. What are the options. Any developments in apex 3.0.1 ? Thanks in advance. I tried the tutorials by Kubicek.
I am kind of stuck to see the function entry inside LOV definition returns a error.

Still really one column.
If they need to be independent then you've got to have three selection lists.
%

CPY0007: Select list has fewer columns than destination table

Hi,
I have two table TB in both Database A and Database B. TB in Database A has 100 columns, TB in Database B appended one more column which is nullable. I'm copy TB data from A to B using something like:
insert into TB select * from TB@A where ...
And I got error:
CPY0007: Select list has fewer columns than destination table.
Besides specify the 100 columns plus one new column, any better ways to handle this?
Thanks a lot.

This is kind of dangerous genarally but if you know the additional column is on the end this might work.
insert into TB select a.*, null from TB@A a where ...If this is a regular operation, I would strongly suggest biting the bullet and specifying the column names. Using desc or all_tab_columns and a simple text editor it should take no more than five minutes, which is at least 12 hours less than you have been waiting for a workaround.

How use select list whit ajax?

when I use this code in my application I get this error
XML Parsing Error: junk after document element
<select><option value="1">- All Emps -</option></select><html lang="en-us" xmlns:htmldb="http://htmldb.oracle.com">
--------------------------------------------------------^
code use in application process.
declare
l_counter number;
l_o_name varchar2(2000);
begin
owa_util.mime_header('text/xml', FALSE );
htp.p('Cache-Control: no-cache');
htp.p('Pragma: no-cache');
owa_util.http_header_close;
htp.prn('<select>');
for rec in (select "RANDOMDATA"."CATEGORY" as "CATEGORY",
"RANDOMDATA"."NAME" as "NAME",
"RANDOMDATA"."ID" as "ID"
from "RANDOMDATA" "RANDOMDATA"
where "RANDOMDATA"."CATEGORY" = :TEMPORARY_ITEM)
loop
htp.prn('<option value="' || rec.id || '">' || rec.name || '</option>');
end loop;
htp.prn('</select>');
end;

Hi Andi.
thanks for answering. But my problem dose not solved.
XML Parsing Error: junk after document element
<data><select><option value="1">-rec.name-</option></select></data><html lang="en-us" xmlns:htmldb="http://htmldb.oracle.com">

Need to use Select List value as column name

Similar Messages

Maybe you are looking for