Need to write a report to show who is using SAP and to what extent

Hi Experts,
I need to write a report which should display who are using SAP and to what extent to forcast future SAP license needs...
and to ensure the compliance by allocating license types correctly.
My report should helpfull to organization to reduce the current license requirements and costs.
Actually my problem is where can i get all these details in SAP, means from which tables.
in which table can we get the sap user ids using mail id...
Thanks in advance........
Ram

Hi gajeramesh ,
Goto transaction 'SU10'
Here you have all the data selection regarding a particular user id, so what you can do is do F1 on any of the fields and see the technical help in that for the table names.
some of the tables are :
                                 1) 'USUSERS'(User: Transfer structure for lists of users),
                                 2) 'USER_ADDR' (Users by address data)
                                 3) 'USUSERALL' (Users with All Data for List Output)
I hope this helps you !!

Similar Messages

Need to create alv report to show pan card number.

Hi,
I need to create alv report to show employee and vendor name , number , Pan card number .This is for hr module.
could any one tell me table and fields for this and how I can relate them with foriegn and primary key.
Regards,
Moderator Message: Do your own work
Edited by: kishan P on Oct 5, 2010 10:38 AM

Yes, but it only has one generic Date column, no start date and end date. I can't use that twice in the prompt. Although I can specify it to be 'between', but I'm not sure I can pass values to both variables like that.
Currently I have used Campaign Start Date and Campaign End Date to enter values in calender format to the variables.

Help needed while exporting crystal reports to HTML file format using java

Help needed while exporting crystal reports to HTML file format using java api(not using crystalviewer).i want to download the
html file of the report
thanks

the ReportExportFormat class does not have HTML format, it has got to be XML. Export to HTML is available from CR Designer only.
Edited by: Aasavari Bhave on Jan 24, 2012 11:37 AM

Summary report to show all the software components and version installed

We are using 64bit Windows 2003 and Hyperion Planning and Essbase in 2 separate servers. I am not sure whether Windows can have a summary report to show all the software components and version installed and show it is 32bit or 64bit version installed?
Thanks!

Refer steps here to delete SC file.:
http://support.apple.com/kb/TS2363
Then proceed to repair your QuickTime. START / CONTROL PANEL / ADD n REMOVE PROGRAMS / highlight QUICKTIME and click CHANGE then REPAIR.

A report which shows the purchase order MM and the linked vendor invoice

Hi All,
I wonder if ther's a SAP standard report which shows the purchase order MM and the linked vendor invoice (the FI document) with the Net due date.
Could anyone help me?
Thanks
G.Rossi

Hi,
ME80FN with PO History View
ME2N with Scope of List "ALLES"

Any standard report to show WBS,settlement, asset no and asset cost/value

Hi All,
Please advice . Is there any standard report to show WBS,settlement, asset no and asset cost/value ? I tried tcode kosrlist_pr but it does not show asset cost/value.. it shows only WBS,settlement and asset no.
Thank you.
Best Regards,
Nies

Dear,
der is no such standard report to show WBS,settlement, asset no and asset cost/value as perv my knowlwdge. so do one thing select one standard report which is more similar to standard report to show WBS,settlement, asset no and asset cost/value but some of like asset no or asset cost or some other values not reflecting in that std report. den u take the Table name and field name of that particular fields which u wann reflect in the report. use the logic of STD TC of SAp which more similar to which u wanna preapre the New TC. tae help of Abaper. tell ur querry and content of ur report . he will definately do it
if ur get my ans reward with points
Regards
Rakesh

SAP Crystal Reports data source connection problem using sap business one

Hi,
I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
I am trying to create a Crystal report but when I try to configure a new connection it does not work.
I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
Our Current SAP related software details are as follows:
OS: Windows Server 2008
SAP B1 Version: SAP B1 9 (902001) Patch 9
SAP Crystal Report Version: 14.0.4.738 RTM
Database: MS SQL Server 2008 R2
I have also added some screenshots of the issues.
Please have a look and let me know if you have any questions or any further clarifications.
I m eagerly waiting for a quick and positive reply.

Hi,
There is problem with SAP Business One date source.
I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
So, try to use OLEDB.
Regards,
Amrut Sabnis.

Downloaded Mt Lion Yesterday and my Tool bar has disappeared. I can still access the individual tools but cannot see my header. I used 'help' and did what it suggested. slected 'hide tool bar' and then 'show toolbar'. I also restarted etc.

Downloaded Mt Lion Yesterday and my Tool bar has disappeared. I can still access the individual tools but cannot see my header. I used 'help' and did what it suggested. slected 'hide tool bar' and then 'show toolbar'. I also restarted etc.

Good point BDAqua, the Escape key helps get me back to reality in Lion.
While I've only dabbled around a little in Lion since it's release (I upgraded a 10.6 Clone to Lion on one of my FireWire Drives) now I'm currently downloading Mountain Lion (to upgrade a Clone of that Lion Clone) so that now I can continue to move forward in madness.
P.S. Trust me, I'm not laughing.

How can we report on R/3 tables using SAP BO

How can we report on R/3 tables using SAP BO.
Thanks

Hi
you can use the CR Designer and build CR reports that access your R/3 system. Another option is to use the R/3 connector for the Data Federator which is available in the Innovation Center. Still this connector is not a product rather can be used on your own risk.
Regards,
Stratos
PS: Accessing directly the tables of the underlying database(e.g oracle) using universes and Web Intelligence is not recommended. You will not be able to decode all contents of the database tables you are accessing since in some cases R/3 encodes the data before storing them in the actual database tables.

Need to create a report to show values for a particular date range

I have to create a report, out of which I need two columns : << Customer Value Variance and Churn Score Variance >> to show values only for a custom date range, which will be entered via a dashboard prompt.
These generic date columns are not present and cannot be added. I have to make use of Pres variables
What I have currently done is:
1) Created a prompt with 2 different date columns and passing those values into variables vStartDate and vEndDate. (I don't actually need those 2 column which I have selelcted, but I have taken those so that I can prompt the values in calendar format and pass onto the variables)
2) Created report with necessary columns, with 2 extra columns (hidden) as vStart Date Column and vEnd Date Column which take the values from the presentation variables defined in the prompt. I have created these columns as then I can reference these in the two required columns if necessary.
I am already facing error in report after doing this and I am confused how to proceed. Any suggestions?
Thanks.

Yes, but it only has one generic Date column, no start date and end date. I can't use that twice in the prompt. Although I can specify it to be 'between', but I'm not sure I can pass values to both variables like that.
Currently I have used Campaign Start Date and Campaign End Date to enter values in calender format to the variables.

SCCM report to show last logged on user and the Active Directory department attribute of that user.

I need to create an SCCM report to show last logged on user on all machines and the Active Directory department attribute of that last logged on user.

You problem is here.
right
join v_R_User USR on USR.ResourceID
= CS.ResourceID
USR.ResourceID != CS.ResourceID, you need to map the username to the user logon to the PC. By using the user’s department information you will
end up with unreliable results.
Anyways you need to make these changes to your query.
left
join v_R_User USR on USR.Unique_User_Name0
= CS.UserName0
http://www.enhansoft.com/

Report to show the followup sales documents and items

Sales had executed many sales quotations with customers over a period of time.
Now the Sales Staff wanted to know how many sales documents and what/how many sales items are being purchased by the customer with respect to the quotation.
Is there a report that list out the sales documents and items created w/respect to a particular quotation instead of looking at the document flow which is difficult to diagnose.
Thanks

hello, friend.
you can try table VBFA, where you can see sales documents and their subsequent documents.
for a general listing of quotations, use tcode VA25.
regards.

Report is showing dupilcate records in Excel and correct records in PDF.

Hi,
I have a problem, when i run the query of report in toad then count is 24 and same records are coming in PDF, RTF and HTML format but some duplicate records come when same report is run in excel or delimited format.

This is bcoz you don't have all the common fields in your infocubes.
Job is the only filed common in the infocube.
Some Characteristics like project is only available in one Cube, similarly and qualification field is only available in other Cube.
If a Multiprovider is created on top of these two infocubes. Common chars are identified from both cubes; others can be identified only from the respective cubes.
When we build a query on this Multiprovider, keeping a char which is not part of both cubes will create an other line with # or NA values present in that column.
In the query designer create a new selection on the KF.
Inside that, maintain description and drag the keyfigure from left pane to selection pane, drag characteristic "jobu201D into the selection. In the context menu of job, choose u201Cconstant selectionu201D option.
repeat the same for all the KFs.
for more details chk the below link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70dcd7b5-6a3d-2d10-c984-e835e37071a2?quicklink=index&overridelayout=true
Regards
KP

External drive doesn't show volume when used internally (and vv)

I have an early 2011 MBP 17" where I have replaced the optical drive with the 750G hard drive that came with the computer. in the hard drive spot I put in an SSD. Recently I got a 1T 2.5" drive and I want to copy all the files from the internal 750G to the 1T and then put the 1T in the optical drive bay to replace the 750G.
I got everything copied to the 1T drive via USB - i put the drive in a USB 3.0 enclosure that I've used before with this machine. everything copied fine. so i swapped out the 750G for the 1T in the laptop. when I booted up, the drive did now show in the finder. in Disk Utility it shows up as a device and the indented volume is a greyed out and showing a system volume designation (something like disk3d or whatever the OS uses for this [I didn't make note of the specific volume name]). when I put the disk back in the USB enclosure, it worked fine.
So i formatted the 1T in the macbook, interally, and it works fine that way. but when I put the 750G in the external enclosure, thinking I could copy the files that way [external to internal]) - the 750G does the same thing: the device shows up ok in Disk Utility but the volume is grey and shows as an OS volume name. like the 1T I am not able to mount it or do anything other than format it.
So I am at a loss. why can I not copy files to an external drive and put that in the machine internally? this is the way I've done this kind of thing over the years. this is the first time I am doing this with the MBP. what can I do in order to get this to work so I can get all the files on the 750G onto the 1T and work in my MBP?
I know I can leave the 750G in the computer, connect a drive and copy it all over to it. then put the 1T in the computer and copy all the files off the external drive to the 1T. likely this would work. however a) i don't have a large enough external drive to do this with and b) i'd like to understand what is going on here and solve it as i may need to do this in the future.
any ideas?
thanks!

How did you backup your internal hard drive to the external? In order to boot a Macintosh has to be partitioned using the GUID scheme and then formatted as Mac OS extended Journaled. Both operations are performed in Disk Utility. You can clone your drive to to the external using a utility such as Carbon Copy Cloner or Super Duper. I'm not sure what you expect to accomplish without install discs. When you clone a drive you're making an exact copy. You shoud probably look at calling Apple and requesting a set of original discs or purchase a full install of Snow Leopard at http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

HT2513 Is there a way to see who made an appointment and at what time/on what date they made it? Kind of like a date/time stamp for our network calendar?

Is there a way to see who made an appointment and what time/on what date they made it? Kind of like a date/time stamp for our network version of iCal? Everyone has all rights and privledges to everyone else's calendar, and sometimes we need to know who did what to whose.

Christine,
You can also ask in the Typography forum,
http://forums.adobe.com/community/design_development/typography?view=discussions&start=0
The guy running whatfontis is a regular poster there.
And apart from
http://www.whatfontis.com/
there are
http://www.identifont.com/
http://new.myfonts.com/WhatTheFont/
and especially for script,
http://www.bowfinprintworks.com/ScriptIDGuide.html

Need to write a report to show who is using SAP and to what extent

Similar Messages

Maybe you are looking for