Need traditional BIOS update for Qosmio F30-111

I would like to get the traditional BIOS update like described in BIOS update FAQ. I don't have windows installed for updating it. (and I don't want to install it)
Can someone supply it? 3.90 version.
Thanks

Hello
if you do not want to install windows and you need to run the bios update windows software , then you can try this method
Instructions
1. download the BIOS
2. Unzip to root of USB flash drive (formatted as FAT32) {"P0041v390.exe" is inside "bios-20080505133719.zip" v3.90}
3. Unplug the USB flash drive and power down.
4. Insert the 32 bit Vista DVD and boot from it (you are not actually going to end up installing it or doing anything, this just gets you to the 32 bit WinPE environment)
5. Click through until you get to the screen with the activate online checkbox and uncheck it.
6. Connect the USB flash key to the computer
7. Press Shift-F10 to open a command prompt
8. Change to the correct drive for the USB flash drive
9. type "P0041v390.exe" {or what ever} and press enter
10. after the flash is complete, before letting the machine restart, EJECT the DVD. (remember, nothing was installed and nothing really happened except you had access to a 32 bit WinPE environment which you needed to flash the BIOS).
{color:#ff0000}I did not try this method , try it and tell me
{color}
good luck ;)
Message was edited by: ADMIN

Similar Messages

  • Need a bios update for p7-1443

    p7-1443
    My machine came with win 8 64bit
    I added a nvidia 570gtx graphic card to use instead of the onboard intel vga
    After win 8.1 update i have the watermark: Windows 8.1 RTM (build 9600): SecureBoot isn't configured correctly
    Is their a bios update available?
    I dont see one on hp downloads

    Vickenp, welcome to the forum.
    No, there is no BIOS update available at this time.  I have seen other threads with the same problem.  I will monitor those to see if an answer to your problem is given.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Need a bios update for the MSI g45 gaming boot issue

    When i first start my system, I noticed that the board doesn't boot up correctly even if we set the main boot to be the hard disk. The system boot in the EUFI section not the hard disk. I had to use boot override function to choose the hard disk then the system will boot normaly to the hard disk. 

    This is a user to user forum. For any UEFI/BIOS modifications, MSI Technical needs to be informed. There are no UEFI/BIOS engineers here;
    https://forum-en.msi.com/index.php?topic=107326.0  >> How To Contact MSI <<
    In the boot sub-section, disable the devices you don't want to boot in the BBS properties, then set the boot order to nothing but the HDD with the OS on it. If this doesn't resolve it, then the alternate workaround is exactly what you did with the Override.

  • Need longer TV-cable for Qosmio F30-147

    With the laptop I got a scart-cable for TV. Its working perfect, but it is a bit short. I´d need it to be at least 3 meters.
    Since I could neither find one at the local computer store, nor on the Toshiba HP, I wonder if someone here knows where to buy/order it.
    Regards

    Hello
    It is not known to me that Toshiba offer cables with different length. I recommend you to contact your local dealer or TV specialist. They have nice solutions for this. I am pretty sure they can offer you a kind of extension cable.

  • Got the 6870 twin Frozr do I need a bios update?

    I returned my Gtx 560 and got the 6870 twin frozr oc. I like it much better. Do I need a bios update for this card? I'm assuming I have the stock version...
    Thanks

    no, vbios update is need in rare cases only

  • Raid Drivers for Linux - Qosmio F30-111

    Good morning
    I have a Qosmio F30-111 and i need the drivers for the Raid controller for Linux. Can anyone help me.
    I have RAID-0 and the notebook doesn't boot. It shows the logo of XP and them reboots. So i need to boot from cd or pendrive to acess or repair the raid partition.
    Thank you
    Antonio Jose

    Sorry to say but I don't have more knowledge about this matter.
    So can you help me !!!!
    Means give me some information about this product.
    I will gonna very happy if you Help Me!!!
    Thanks in advance

  • Need systemboard Qosmio F30-111

    Hello,
    I need a new systemboard for a Qosmio F30-111?(PQF30E-00Z00QDU). The videocard is defective. I live in the Netherlands and it is impossible to find a new systemboard. Can somebody help me to find one or companies who can fix it like they do in the UK. In the UK you have a company who can fix it without replacing the mainboard (http://www.laptoprepair1.co.uk/laptop-vga-video-repair.html) but they only repair it for citizens in the UK only.
    Thanks in advance,
    Charles

    Wait a moment buddy. This is international forum and here are so many people from different countries all over the world. Why should someone from South Africa or Columbia search such company for you?
    You know your language and use Google to find this. Nederland is small country and it is possible that such company does not exist. Maybe you will have more luck in Germany.
    Ok, at the end I hope someone will have time to search it for you.
    Good luck!

  • Need help finding a BIOS flash tool and BIOS updates for HP Compaq nc8230 running Windows 7

    I put together this laptop. It didnt come with a hardrive, and basically I installed everything from the ground up.
    It is an HP Compaq nc8230, IDE Hard drive, Windows 7 32 bit. The BIOS on it is the original one. I've searched far and wide, but to no avail, it seems there's zero support for this model anymore.
          Basically it was never intended to go beyond Vista, back in 2004 when this model was introduced.
       The reason I am searching for some kind of BIOS update, whether it is BIOS or SMBios is to get the ACPI driver to recognize the primary laptop battery. This is crucial: it only sees both as the travel battery. Other than that, all else is fine.

    Hi:
    Here is the latest BIOS update for your notebook.
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
    You cannot use the windows based flash because you installed windows 7, so I provided the link to the DOS based flash.
    You need to use a USB floppy drive for this update.
    Oh, and the card reader won't work unless you install this updated driver which is not on your PC's support and driver page.
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
    Also, here is the link to your PC's support and driver page...
    http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=321957&prodSeries...

  • Need USB drivers for Qosmio F30-112

    plz.... I need USB driver for Qosmio F30-112
    coz USB does not work properly

    Hi mate,
    your description is really, really short. Could you please describe more detailed WHY ITS NOT WORKING and what you have attached at your USB-ports.
    I ask it, because USB under XP/Vista does not need any drivers. By the way ,which operating system is installed on your machine?
    Greetings

  • Satellite A200-23U - Need Bios update for XP

    Hi!
    Where I can find BIOS update for this notebook for Windows XP?
    Thanks.

    > Is it possible install other similar BIOS for XP from the Toshiba American driver page? Are there some forecasts for appearance of BIOS XP update on the Toshiba European driver page?
    I would not recommend installing different BIOS updates from different notebook series on the Satellite A200-23U.
    The point is that a wrong BIOS or not compatible BIOS can damage the ROM module or the motherboard!!!
    I would not risk this!!!
    Fact is that you should update the BIOS only with the version which was designed and published especially for your notebook model.

  • Need BIOS update for Tecra A4-SP619

    I have a Tecra A4-SP619 and i need a Bios Update. Where I find this?
    Thanks

    _One additional info:_
    You should know that the BIOS update is always risky.
    The wrong BIOS or wrong BIOS update procedure can damage the board or the ROM module.
    Yes its true dude. The BIOS upgrade is not an easy thing like a graphic card driver update. BIOS update should be done as a last resort.
    and please read more info before you will continue the BIOS update.
    best regards

  • BIOS Update for Tecra 8000 without Floppy Disk

    I searched in this forum for a solution to update the BIOS without a floppy drive. The only one i found was this thread [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=66966&tstart=0] , but there is no .iso file for the tecra 8000 series.
    is there any solution to get the new bios installed on my tecra 8000 without any floppy drive ?

    I have checked Toshiba BIOS download page on http://www.toshiba.eu/innovation/download_bios.jsp and TRAD BIOS version is offered. This old Tecra is maybe 10 years old and at this time Toshiba has offered traditional BIOS update only.
    Win versions are offered later with newer Tecra 9000/9100.
    Sorry.
    Maybe stupid question now but why do you need BIOS update?

  • There are two BIOS Updates for Satellite A210 2.00-WIN & 2.30-WIN

    In 2010 there are two BIOS Updates for Satellite A210 2.00-WIN & 2.30-WIN
    In archive: http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp
    They compatible for Satellite A210-1AO, Part Number: PSAELE-03Q009G3 (BIOS version/date TOSHIBA V2.0, 2008.06.10)?

    1. When I press power button notebook and OS start as usual.
    2. When I press power button and after I turn PC to BIOS mode, PC is crashing (shortly).
    3. So, I checked using standard OS tools hard disks for errors (errors was on disk where OS and all software installed. All errors was fixed).
    4. After I started using standard OS tools (Start from: BIOS->System start from CD-Rom with tools on CD) RAM memory test.
    5. On stage Test All Memory PC crashed. (No any dumps/logs left in the system about crashing).
    6. Now I need to do some physical manipulations. Ill have check each memory module. And I don't know how looking my motherboard, what is where on it. Where I can see scheme with details, names and elementary explanations (what is what)?
    Im not sure, but motherboard should be IALAA..?

  • Bios update for my Toshiba satellite c675-s7200 - Helppppppp :/

    I am being told to download the bios update for my laptop so I put in the serial # and it gives me an update but I have read alot about once you upate your bios it wont work so I am really nervous about doing this..here are the problems I have been having..
    1. My laptop was restored back to the factory settings just like it came out of the box.
    2. When I turn on my laptop I have to press f1 to start windows now keep in mind it does not ask me to press any keys I only knew to press f1 because it was stuck on the Toshiba screen showing the f2 and f12 keys so I began pressing them all until i got to windows. None of the function keys work expect f1
    3. Once I get into windows everything runs and works fine. I have gone into my toshbia asst to reset the bios to default but it does nothing so I can not apply it. What do I need to do?
    I have been told that I need to replace my cmos battery but then I have been told that is not the problem the problem is the bios settings need to be changed to the default WELL ok how do I that if it will not let me?
    Helpppppp...

    Hi! It could be your CMOS battery causing this. Shut down your PC. When it starts up and you see F2 and F12 at the bottom of your screen, press F2. Find where it says to set to default on the bottom of the screen. My default is F10. Yours
    may be different. After you set to default , save and exit!
    Dokie!
    I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

  • Compaq Presario SR2129UK bios update for windows 8 pro 32bit

    Hi all.
    I have recently upgraded my operating system from Windows 7 pro to Windows 8 pro. I have alos changed the CPU to a pentium D, The power supply and the graphics card but I am having from with my SD ram and temperature displays.
    I want to upgrade my bios if possible due to all the upgrades, when I looked in this site it doesn't mention windows 8 operating system with my PC? My system info is below.
    Compaq Presario SR2129UK bios update for windows 8 pro 32bit.
    Any help would be appreciated.

    Hi:
    The only BIOS update for your model is for Windows Vista (v5.23).
    There aren't any newer BIOS releases than that one.
    You would need to be running Windows Vista in order to update the BIOS, or you would run a better than 99% chance of completely wrecking your PC.

Maybe you are looking for

  • FPGA_I got an Xilinx error while compilation

    Hello, I have some problems related to cRIO- 9073, Labview and FPGA. In the following OneNote file (in the zip file) there is a detailed description about the problem it´s a Xilinx error. Also i attached the Zip files with the project folders includi

  • Getting Message from Exception

    Hi, I've got an RFC written in Abap that raises an exception with MESSAGE ... RAISING ... The exception name is always the same, however the message ids and numbers are different. A caller written in Abap can simply read the values out of SY-MSGID, S

  • Attachments in and out of forms

    I have a form which I want to gather the attachments off of and render into another form at a later step. I have gotten quite far with this, but have a few issues. The first form submits as PDF and the initial step of the workflow is a processFormSub

  • Standard C Libraries

    I posted this in a different forum, and was referred to this one. Original post: http://discussions.apple.com/thread.jspa?messageID=4124221 Hi, This may or may not be a stupid question, but how can I obtain standard C libraries for Tiger? Specificall

  • Problem in fetching data for Tcode QA03

    Hi, I am working on a report in which i have to pick up the dates for a material i.e. when it is MIGO is done and when it is moved to unrestricted stock. Till now i am fetching up the data from MSEG nad MKPF where i am getting the data w.r.t. movemen