Need Transport route for two systems(Urgent)

Hi All,
I have configured everthing like configuring domain controller and added to to domain controller.
Now i need to do below steps
I have Development (client) and Quality(client) in same system and Production as separate server.
I want to configure transport route from Development client to Quality client and from Quality client to Production Server.
Development Server SID is DEV ( Dev Client 100 and Quality Client 140) and Production Server SID is PRD
Transport route must be configured like below:
DEV( Dev client 100) -> DEV (QAS client 140) -> PRD
We are struck with this
Best Regards,
Pratyusha

Hi Pratyusha,
As far as configuring Development and Quality systems concern, in one system is not suggested. I think you are aware of this.
However, I need some more information on your question like the operating systems which you are using in DEV/QAS and in PRD.
First, configure the Domain Controller in either DEV/QAS or PRD.
Irrespective of the OS, you need to maintain IP address along with the host name and fully qualified domain in the etc/hosts file.
for example DEV/QAS system ip address is 172.16.23.14 and host name is abc007, then you need to make an entry in etc/hosts file at the OS level as follows.
172.16.23.14 abc007 abc007.yourcompany.com
where in abc007.yourcompany.com is the fully qualified domain name.
Once you done this in both, DEV/QAS and PRD, systems, then configure 3 system landscape from STMS tcode in the other system which is not a Domain controller.
I hope this is helpful. Getin touch if you have any more questions or doubts.
Regards,
Satish.
Edited by: Satish Arram on Jul 31, 2008 2:06 PM

Similar Messages

Transport target for business system not found in System Landscape Director

Folks,
We have new installed new PI 7.1 system and importing interfaces from the OLD XI 3.0 system in to new PID 7.1 system.
We are getting following error when we try to import an interfaces in to new PID system:
Import failed because of business system transfer object
Communication component XID_FileSystem: Obligatory
transport target for business system XID_FileSystem not found in
System Landscape Directory
We are yet to install PIQ system.
All the interfaces in the old XID system have transport target of XIQ system. I removed the transport taget for the interface, but transport target is still showing in the Business system under transport target head.
How can we overcome this issue as we will not have PIQ system atleast for two weeks.
Thanks in advance,
Regards
Chandu

Hi,
You need to maintain Transport Groups and target for business systems while SLD transports between your XI system and PI 7.1
Illustrated with DEv & PRD here.
Procedure:
1) Call Integration Builder screen on DEV Server with http://hostname:J2ee Port/rep
2) Call SLD (System Landscape Directory) Component from the Integration builder
Save all the Following .zip files on the Local Desktop
3) Select the Software Component & say Export that you want to Export from DEV
Server to Production server and which is going to use in the IR of XI
4) Also Select the Product of the above SWC and say Export
5) Select the Technical Systems (TS of XI & TS of the SAP R/3) and say Export
6) Select the Business System(s) & say Export; those are associated with above Exported
Technical systems.
In Production Server
1) Logon to the SLD of the Production Server.
2) Create a Technical System and Business system which points to the Production SAP R/3
3) Go to Administration TAB in the main page of SLD
4) Select the Import option to Import the SWC , PRD, TS,& BS which we Exported Earlier in DEV Server
5) Click on Browse and select the .zip files that is to Import into Production Server,
Which were stored on the local desktop at the time of DEV Server Export
And say Import Selected File Option
By this we exported and imported the SLD Objects
Now we have to create transport groups and transport targets in the Production server of SLD
Creation of Transport Groups
Edit GroupsGroup1) Select the Business systems
2) Click on New Group and give the name of the group as DEV_group & select the
Corresponding Development serveru2019s integration Server
3) Similar way create another group for Production serveru2019s business system as
PRD_group and select the Production serveru2019s integration Server
Creation of transport targets
This is to Define which business systems in two different groups correspond to each other
1) Select each Business system in the SLD and select transport TAB---click on
Add/Change Target and select its corresponding target business system.
For Example:
If you select the business system of Production XI server means
In the target you have to select group as DEVGROUP and the business system of Development XI server.
Like this do the same for other business systems also
Ex:
BS_PRD_Integration Server----
BS_DEV_Inetration Server
How to create Transport Groups & transport Targets
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Regards
Seshagiri

DEV- QAS : Obligatory transport target for business system not found

Hi guys!
I have read all the other threads about this subject, but since I still have no success, I´m feeling obligated to ask you for a help (deadline approaching fast!)
I´m trying to transport a Communication Channel, from DEV environment to QAS. I'm having the 'usual' error:
Import failed because of business system transfer of object Communication Channel * | SIGA | SOAP_SYNC_SENDER: Obligatory transport target for business system SIGA not found in System Landscape Directory
Here were my steps:
Keep in mind that in DEV, everything was up and running: Software Component, Product, Technical System and Business System for this name "SIGA".
1 - In DEV, I created a new Technical System, named "SIGA_QAS", pointing to my QAS server. (Keeping in mind I already had a "SIGA" pointing to my DEV server.)
2 - Still in DEV, I did create two groups: GROUP_DEV and GROUP_QAS, one points to INTEGRATION_SERVER_DX1 (DEV) and the other INTEGRATION_SERVER_QX1 (QAS).
3 - Still in DEV, I created the Business System called "SIGA_QAS" also, pointing to my QAS server.
4 - Still in DEV, I went inside both Business Systems and put: "SIGA_QAS" as TARGET BS of "SIGA" (which automatically puts "SIGA" as SOURCE BS of "SIGA_QAS")
If I look at my QAS SLD, I can see all of these objects already there, since my BASIS team did activate the 'sync' between these two environments. So, I dont need to create anything 'new' in my QAS SLD, all the objects are there, same as DEV SLD.
If I try to EXPORT/IMPORT a simple Communication Channel (using file system or even CTS - I tried both) I get the error mentioned above.
But this is 'wierd' for me, since the error says: "business system SIGA not found in System Landscape Directory", but it is there, in both SLDs.
Am I missing something here?
Thanks!
Ricardo Sancio Lóra
Brazil

Hi,
If you not tried this then try it. Delete the Business System SIGA from Integration Directory in your QAS system and then again import the business system from SLD. Acitvate the changes and then import the CC from Dev to QAS.
Regards,
Sarvesh

Obligatory transport target for business system BS_DEV in SLD

Hi all,
   We are moving receiver detrmination from QA to PRD, there we are getting one error
"com.sap.aii.ibtransportclient.XiTransportException: caused by: ClientServerException exception:Impo
>>>rt failed because of business system transfer of object Receiver Determination   BS_DEV
>>>   *   *: Obligatory transport target for business system BS_DEV not found in Sys
>>>tem Landscape Directory caused by: com.sap.aii.ib.core.transport.api.PostprocessingException: Import
>>>failed because of business system transfer of object Receiver Determination   BS_DEV
*: Obligatory transport target for business system BS_DEV not found in Syste
>>>m Landscape Directory caused by: com.sap.aii.util.hmi.api.HmiMethodFault: caused by: ClientServerEx
>>>ception exception:Import failed because of business system transfer of object Receiver Determination
>>> BS_DEV      *   *:Obligatory transport target for business system WP
>>>C_Dev not found in System Landscape Directory caused by: com.sap.aii.ib.core.transport.api.Postproce
>>>ssingException: Import failed because of businesssystem transfer of object Receiver Determination
>>> BS_DEV     *   *: Obligatory transport target for business system BS_
>>>DEV not found in System Landscape Directory"
I am moving the same object from development to production, i feels ther is some problem in setting transport target.
BS_DEV target system is BS_QA, in development sld
BS_QA source system is BS_DEV anf target system Is BS_PRD in Quality sld
BS_PRD source system is BS_QA, in production.
The above error occurs when we are moving same object which i moved from development to quality to production.
whether i need to take obejct from quality and need to move that one to production, or i can use the same development object to production...?
Regards
Pradeep P N

Hi,
Even I am facing the same problem.
we have given the Transports Target as mentioned, but still facing the same error:
Deployment
Transport request   : DPIK900141
System              : QPI
tp path             : tp
Version and release: 375.30.25 710
CTS Deploy Service - Version 0.92 06.03.2007
========================================================================
Deploy Web service destination = CTSDEPLOY
Directory = /usr/sap/trans/data
SDM Deploy URL =
SLD Deploy URL =
XI Deploy URL = http://sqnpi1.sap.sgroupit:51600
Double-stack system QPI
Deploy for XID
Deploy File = 2f8021d0f9ca11dea81e001a64925608
Start of Web service log
Deploy Service called with following parameters:
CommunicationData-Type:1
CommunicationData-Address:http://sqnpi1.sap.spoolzgroupit:51600/dir
CommunicationData-Host:sqnpi1.sap.sgroupit
CommunicationData-Port:51600
CommunicationData-User:'filled'
CommunicationData-Password:'filled'
Deployable(0)
Deployable-Type:1
Deployable-Id:/usr/sap/trans/data/DPIK900041/2f8021d0f9ca11dea81e001a64925608
com.sap.aii.ibtransportclient.XiTransportException: caused by: ClientServerException exception:Impo
>>>rt failed because of business system transfer of object Receiver Determination   DPI   SI_POS_CH_SN
Returncode:'8'
Deployment
End date and time : 20100105151741
Ended with return code: ===> 8 <===
Can anyone guide to solve it.

Obligatory transport target for business system SAPR3D not found in System

HI All ,
We have installed New PI 7.1 system and stared migrating the interfaces from XI 3.0 to PI 7.1 . in Devlopement system .
IR object have been successfully deployed but while delopying ID objects got the following error . Obligatory transport target for business system SAPR3D not found in System Landscape Directory.
When I checked with business system transport target was not defined ., Please suggest how to go ahead further .
Thanks ,
Prakash

Hi Ravi,
Please go through below disucssion it is on the same line of your question.
Transport target for business system not found in System Landscape Director

EWA Report not being sent for two systems

Hi Experts,
We are having one issue in EWA Report in solution manager. Searched hard but could not find solution.
Our solution manager is configured to provide EWA for 4 systems- ECC, BW, PI and Solution manager itself.
The configurations are in place to the extend that we are able to view the weekly reports in Solution manager.
Issue is -
1. We are able to recieve mail notification for Solution Manager and ECC but not able to get for BW and PI.
2. The ECC report is coming ok, but Solution manager report is blank.
The places I checked the configuration -
1. SDCCN for all systems.
2. SOLMAN_EWA_ADMIN - all systems active and chcked for EWA
3. Background Jobs for all systems -Maintenance Package, Refresh Session, Earlywatch Alert for Solution Manager
4. Background Jobs related to the task including SM:EXEC SERVICES
Later on I deleted and rescheduled the job SM:EXEC SERVICES to make sure it covers all systems.
Data is visible in Solution Manager but report is not being sent over mail for two systems- BW and PI.
Solution manager report is being sent but empty.
Please suggest.
Regards,
Sabita

Hi,
what is your ST verison? check this note applicable or not
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1496931|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1496931]
and chek the version of your service updated ST_SER too, patch this also solve the issue
refer this [Note 1482818 - Service updates ST-SER 701_2010_1|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=0001482818&nlang=E]
Jansi

Configuring Transport route in Java system

Hi,
Pls let me know the steps to configuring transport routes in Java System.

Hi,
Please look at the following pdf which tells you about CTS+ in portal with only java and non abap objects.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90d3b550-b6fb-2910-0fa5-ece5d61fb9c3
Rakesh

The download is for Windows. I have MAC OS X 10.9.1. I need a download for that system, please.

The download is for Windows. I have MAC OS X 10.9.1. I need a download for that system, please.

are you using the mac (not windows) serial number?
if yes, http://helpx.adobe.com/x-productkb/global/my-serial-number-doesnt-work.html

SAP WEB Dispatcher for Two systems

Hi experts,
i want to configuration SAP web dispatcher for two hosts
web dispatcher has installed on saprate host( host are accessible via public ally) and other host contains two ABAP system are in same host.
i have configure two HTTP ports in the Web Dispatcher profile
icm/server_port_0 = PROT=HTTP, PORT=8888
icm/server_port_1 = PROT=HTTP, PORT=7777
In addition, you define the system assignments, as follows:
wdisp/system_0 = SID=ERP, MSHOST=ms_erp, MSPORT=8082, SRCSRV=*:8888
wdisp/system_1 = SID=CE1, MSHOST=ms_erp, MSPORT=8127, SRCSRV=*:7777
but i want to know how can do the url mapping i want to open WEBGUI for both ABAP systems.
and how can access?
Please suggest.
Regards,

Hi Vivek,
Check the below link, I think it would help you with the configuration.
One Web Dispatcher, Multi Systems with URL Prefixes
And also read the below document for the Mapping of one SAP Webdispatcher to Multiple Systems.
http://help.sap.com/saphelp_nw73ehp1/helpdata/en/b0/ebfa88e9164d26bdf1d21a7ef6fc25/content.htm
Regards,
Sushil

% DB increase differs for two system from the same landscape

Hi all ,
I have done upgrade and then unicode conversion for the two system- sandbox and development from 4.6 C to ECC 6.0 with oracle 10 G and AIX 5.3
On sandbox % db( used db size in DB02 ) increase is 60 to 80 which is as per SAP figures after unicode conversion however on dev it is almost 150 % .
Has anybody faced the same problem before or can you suggest somthing for this tremendous data growth
Also what I have observed is threre are 7 tablespace on sandbox and 8 on Dev with "PSAPSR370" as the additional one on DEV ( PSAPSR3700 is different )
Please help me on this
-Ganesh

Hi Ganesh,
the database growth depends heavily on the content. Which languages do you have installed in your system and which modules are used by your company?
I think the normal growth should be in a range of zero to 30 percent. The lower end comes from the reorganization effect due to the migration and 30 percent comes due to the fact that most data is normally numeric and numbers are the same with or without Unicode. But in rare situations it could be possible to see much higher values. The reason is, that Oracle, and also DB2, are using UTF-8 encoding if you're running your system as Unicode system. In UTF-8 a two byte Unicode character could be encoded in up to four bytes. That means if your systems contains lots of double byte characters it could grow much more than 30% but it seems unusual to me.
Are you sure that nothing was wrong with your migration?
Best regards
Ralph Ganszky

Satellite L450D - Need Wireless driver for Linux system

Hi,
I have a satellite L450D, with a Realtek RTL8191SE wireless card (windows 7). I use Linux for college and i can't get on the internet when i use linux cause the oporating system dose not find my wireless card.
When i check from command line for wireless cards, it shows that there are non.
I know other people that had this problem and basically i need a driver for it.
Can any one let me know what driver i need or where to get it? I would really appriciate this as i need to use Linux for college.
Thanks

Hi
I googled a little bit and found some tips in the internet.
It seems that there is no Linux driver for Realtek WLan card rtl8191se and rtl8192se.
Bu someone has managed the WLan installation by installing ndiswrapper from synaptic in Ubuntu + GUI. He downloaded the W2K driver net8192se.sys and net8192se.inf.
The W2k driver work but the combination driver W2Kxp or the xp or vista doesnt work.
After that you can use WPA because WEP encryption is not supported

7.1 SLD-LMBD. Advice needed: duplicated entries for SAP systems

Hi Experts,
I've noticed few duplicate entries that appear in SOLMAN 7.1 during the content synchronization from SLD to LMDB and migration from SMSY to LMDB.
For instance:
I already had CRM syetem in Solution Manager: CRD
After the SLD-SMSY-LMDB sync & mirgation new CRM system was created in SOLMAN: CRD00001. and it has absolutely the same setting and parameters as an old one: CRD.
This happens for other systems like: BW, XI, etc..
Any advice please how to avoid such duplications in the SOLMAN systems' landscape?
Thanks & regards,
123

Hi,
This normally happenes if there is some differences in the data in SMSY and SLD.
It may be any header data..Database host name ot any small entry.
Please check the below note:
1507548 - Duplicate SID in Transaction SMSY.
The solution can be, cleanup the duplicate entries manually and update the data properly. check if any thing missing in the SMSY definition.
Hope this helps.
Regards,
Sunny

Using the Log Viewer for two systems on same host

We have two Portal systems installed on the same host server. The log viewer only identifies and displays the log files from one of the systems (A). This is the case even though I started the log viewer while logged on as the <sid>adm for system (B).
In the configuration of the Log Viewer, I do not see an option to have it add another "system" to the local host.
How can I configure the log viewer to display logs from both systems installed on the same host?
Thanks,
Bob

Bob,
with the port you can distinguis between the servers. both portals should have unique ports on the same server.
for you relevant is the P4-port.
these settings work for remote servers:
Name: <SID>
Host name: <hostname of server>
Port: <P4 Port, normally 5<SysNr>04>, you can check this at: http://<host>:<port>/sap/monitoring/SystemInfo under the Dispatcher infos
Connection: J2EE
User: <admin user>
Password: <admin user password>
kr, achim

How to transport Messages between two systems

Dear Expert,
I have a question regarding support message transport. Now I want to transport support messages from one system to another. The source system is Solution Manage 7 EHP1 and target system is something with patch level less than 17. How can I reach the goal in an easiest way? Please guide. Thanks!
Regards,
Fred
Edited by: Fred Zhou on May 10, 2009 5:10 PM

Hello Fred,
May be you can try assigning your support messages to a test plan, that test plan would have been created based on a project.
So while transporting that project, the test plan will get transported(not sure whether the test case status and support messages are getting transported).
Just in case, might help you.
best regds,
Alagammai.

Need common page for two Web applications

Hi,
I got two web applications. I need to have a common point/ page to get access to them. I need to have a jsp or html page with two respective links. Providing this is fine but I need help as to how do handle switching the contexts.
Any alternative solution is also welcome.
Thx.

Does it have to be an Itinerary? This is fairly simple with just an Orchestration.

Need Transport route for two systems(Urgent)

Similar Messages

Maybe you are looking for