Need ugent help with APC and ICW

We are upgrading our Inventory and Engineering Applications to 11.5.9 to implement APC. I needed some help with the Item Creation Workflow that is shipped with APC. If someone has extensive experience with this, please send me an email-id to which I can send my questions. Any help is greately appreciated.

thanks for the response. It is a USR ring.
On the sonet ring we have 8 ONS 15454 boxes. They have 1 central site and 7 remote sites. Mojority of the Circuits go from the central site to the remote sites. Only a few circuits (STS) go from a so called remote site to a remote site. Also, we have 6500 hooked up behind every ONS box that does the routing. Is this an optinal design??

Similar Messages

I need some help with AVI and IDX files please.

Hello there,
I've just been given a hard drive with a load of media on it that I need to work with in FCP.
There's a folder with many .AVI clips, and each clip has an accompanying directory file with the extension .IDX
The format of the AVI files is DV, 720x576, 48kHz.
For the life of me, I can't get FCP to accept the media. Log and Transfer won't accept them, and if i bring in the AVI files in on their own using File>Import>Files... I get a message saying:
Media Performance Warning
It is highly recommended that you either recapture the media or use the Media manager to create new copies of the files to improve their performance for multi-stream playback.
I can click 'OK' for this message and the media will appear in the browser, but If I place one of these AVI files on a new conformed sequence, the audio needs rendering. (Sequence settings correspond to media settings)
I tried just changing the wrapper from AVI to MOV, thinking I could fool FCP into accepting them, but I get the same rejection.
I thought the audio and video signals might be muxed, so I tried MPEG Streamclip to sort that out, but even MPEG Streamclip doesn't accept the media, saying : File open error: Can't find video or audio tracks.
Could anybody advise me on how to get the most out of these media files please?
Thanks in advance.
James.
Message was edited by: James M.
Message was edited by: James M.

yes. I tried transcoding in QT, but they still come in with the same audio rendering required. I'm a bit loath to convert them all though, as there are 1400 clips.
It's not a huge problem, as they do play in FCP, but I'd like to sort out the audio rendering. I don't understand why it needs rendering as the media and sequence audio settings match, and it's not some weird format or anything, it's bog standard 48kHz stereo.

Need Urgent Help with Apache and PHP

I have been struggling with apache and php for a week now and I finally broke down to post a message.
I have apache 1.3 running on my mac mini g4 with 10.4.9 and I installed sql. I went to the entropy website and downloaded php5 to install without knowing I already had php4 on the machine. I installed 5 but could not get it to work. I then went back to httpd.conf and tried to install php4 by uncommenting out the loadmodule and addmodule lines. I restarted apache but php still did not work. I tested the phpinfo.php script but all I got was the script in Safari and not the actual page. At the moment, I have php4 and php5 on my machine but can't get either one to work. I am sure there is an easy fix but I don't know it. Please help.

The problem is not terribly complicated, but Apache will not start with the entropy file in the folder
/etc/httpd/users/
Let me experiment on you. Rename the entropy file and then try to start Apache. To do this, open Terminal and paste this command:
<pre>sudo mv /etc/httpd/users/+entropy.conf /etc/httpd/users/+entropy<pre>
Now check the Apache configuration:
<pre>apachectl configtest<pre>
If it says "Syntax OK", start Apache:
<pre>sudo apachectl start<pre>
Since we only disabled the entropy file, you should be able to enable PHP5 with some more advanced configuring.

Need some help with Firefox and userChrome.css

As you can see there is some space underneath the tabs. I used the addon 'Classic theme restorer' to hide the adressbar, but unfortnanly it left some space underneath the tabs. I've been trying to fix it with userChrome.css myself, but I really dont know what am I'm doing.
Does anyone know how to remove it?

*For Safari (4.0.2)* I just clicked help>installed_plug-ins and get this:
http://www.easy-share.com/1908259228/Installed Plug-ins.html
*Firefox (3.5.3)* tools>add-ons>extensions: Ad Block plus
and tools>add-ons>Plug-ins: http://yfrog.com/6qnag2j
Message was edited by: Jonnymont
If I just delete these won't it make things worse? like not being able to go to any flash sites at all (majority of internet these days)
Message was edited by: Jonnymont

Need some help with WRT54G2 and Home Network

Ok, I've had the WRT54G for a long time and recently updated to the WRT54G2 but now can't access file and print sharing that's running Windows Vista from Windows XP using wireless.
Here's my set up,
Desktop running Windows Vista connected to router (This is the computer with Folders and Printers)
2-Windows XP Laptops connected wirelessly
All 3 are set on same workgroup can be seen on Windows XP machine when going to, My Network Places, also all can get on the internet.
Any ideas what the problem could be? I'm guessing a setting somewhere but I haven't been able to find it.
Solved!
Go to Solution.

Hey Gary...
I just upgraded my set up to a WRT54GS from an older linksys router that only had A/B. I have two wired desktops and a wireless desktop in my network..all running xp and all sharing files. I had no issues with the file sharing prior to the upgrade but once I changed over the computers could see eachother, access the net but not share files...Chances are it is likely a firewall issues...
Try turning off windows firewall...that might help..
Also depending upon your antivirus there might be settings in there that you would have to change to allow for file sharing.
In my case I did some research and read that if you are running Norton 2009 on the computer that you want to share files from to try uninstalling and reinstalling the program..Had something to do with firewall settings in the program.....I did that and ouila...now all my computers are sharing again...
Message Edited by redlands on 06-07-2009 06:41 AM

Need some help with cfoutput and a tag

hey there,
got meself into some issues with <a> and <cfoutput> tags.
Problem:
myResult = <a href="http://www.mysite.co.uk" rel="nofollow">mysite</a>
<cfoutput>#myResult#</cfoutput> outputs "<a href="http://www.mysite.co.uk" rel="nofollow">mysite</a>" (surprise isn't it?)
now is there any way to output it as html so it would display a link to "mysite"???
cheers,
Simon

thanks!
I've missed the fact that it was xml data. Just added .xmlText at the end and that sorted my problems. However I'll write down cfsavecontent solution for the future reference.
cheers,
Simon

Need some help with WM and gkt configuration

Hello everybody.
I've installed Arch Linux few days ago and currently I'm having a problem with gtk apps. It's the classic problem that they look ugly under fluxbox, my WM. I've tried to put this on ~/.xinitrc:
exec fluxbox
# load this to have gtk2 apps look ok
GSDPID=`pidof gnome-settings-daemon`
if [ "x$GSDPID" == "x" ]; then
gnome-settings-daemon &
fi
or:
# load this to have gtk2 apps look ok
GSDPID=`pidof gnome-settings-daemon`
if [ "x$GSDPID" == "x" ]; then
gnome-settings-daemon &
fi
exec fluxbox
And nothing happened. I'm sure it's an easy issue to solve, but I'm stuck here with this. Thank you for reading and thank you for your help.
EDIT: I still have some time to lose on my laptop so can you recomend me which minimalist WM is better??
Last edited by xlasttrainhomex (2008-10-05 11:49:15)

I highly recommend Openbox. It doesn't provide you a panel like Fluxbox does, so you'll need to find yourself a panel - if you're lost for choice I can recommend tint2 and bmpanel as starters.
Anyway, Openbox has session configurations for both GNOME and KDE, meaning that while GNOME will be sitting under all your applications, will try to manage your desktop, will try to launch panels, etc etc etc, Openbox will be managing your windows, and you can turn off whatever you don't want anyway - I have a highly configured, customized Openbox setup that gives me no indication except in my process listing that I'm using the GNOME session manager: the splash is disabled, Nautilus doesn't try to manage my desktop, I have no GNOME panels, and so on.
-dav7

Need some help with DNG and error parsing the files

Ok, so I found out that I can't open NEF files with CS2 from my Nikon D3100 - unless I upgrade to CS6, or use the DNG converter. I did download the DNG converter that came with the Camera RAW 3.7 (for CS2) in one of Adobe's links, but when I try to convert the NEF files, the DNG converter says "There is an error parsing the file". If it helps, I have Windows 7. Is there a different version of the DNG converter I should be using? Thanks!

A simple Google search will find it. For some reason it isn't on the Adobe website. If you upgrade to CS6 you'll find much improvement in your raw conversions.
http://blogs.adobe.com/lightroomjournal/2012/12/camera-raw-7-3-and-dng-converter-7-3-now-a vailable.html

Need urgent help with service and file removal

Hi,
I need a powershell script that would stop a windows service ,wait for 2 mins, delete a particular file from C:\documents&settings and then start the service again.Is this possible ?
Thanks

Thanks for the reply chen. May be i was not clear in my query
I plan this because a particular file of configmgr is corrupt on workstations. So the service has to be stopped first before the deletion. I need to run this on many computers remotely. The import file will have the machines that need the script to be run.
The script has to run all the four steps on the machines based on the import file and export to a file with the results.How can i modify ?
The sequence will be as follows
Stop-Service -Name BITS -Verbose
Start-Sleep -Seconds 120
Remove-Item -Path C:\documents&settings\***** -Force -Verbose
Start-Service -Name BITS -Verbose
Regards
Sd

I need some help with MIDI and accessing samples

I recently purchased Logic Express 9. I'm really happy with it--it's certainly a step up from Garageband--but I'm having trouble connecting my MIDI keyboard. In Garageband, I was able to just plug the keyboard in using a MIDI/USB cable and play software instruments immediately. But in Logic, when I connect the keyboard (a Yamaha PSR-273) into a USB port, it doesn't even register! Right now, the only way for me to play software instruments is through the Capslock keyboard, and I would prefer to play on real keys. How can I connect my keyboard so I can play Logic software instruments?
Also, I read on the Apple website for Logic Express that there are "More than 1000" sampled EXS instruments, including "strings, horns, woodwinds, guitars..." etc. The only EXS instruments that I've been able to find are synthesizers. Where are the other EXS instruments and how can I access and use them?

Make sure that the keyboard is turned on before you launch Logic.
In the system preferences of the computer is it connected?
In the preferences of Logic, does it give you an option in the audio section to use the driver in your keyboard? That should come up if its connected

Need desperate help with iTunes and now to report my issue

Hello,
I have just been cleared out of my £70 gift vouchers i received for Christmas by downloading an buying ingame things for something called "Kingdom Conquest"
I have never seen or heard of this game, I had an email saying it was downloaded onto another device that wasnt mine and i should change my password so i did.
Next thing i see is 2 emails saying i purchased 2 X £30.99 bundles. How do i get this refunded and reported. I am very frustrated about this.
Thank you.

Hi P3DR0X.
Don't worry, this sort of thing is easy to take care of. The iTunes Store can oftentimes refund you for purchases such as these. Just connect to them via https://expresslane.apple.com and ask about it.
Cheers.

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980's and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980’s and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my own folder and file naming conventions. I currently have over 23,000 images of which around 60% are scans going back 75 years. Since I keep a copy of the originals, the storage requirements for over 46,000 images is huge. 180GB plus.
I now have a Macbook Pro and will add an iMac when the new models arrive. For my photos, I want to stay with Photoshop which also gives me the Bridge. The only obvious reason to use iPhoto is to take advantage of Faces and the link to iMovie to make slideshows. What am I missing and is using iPhoto worth the effort?
If I choose to use iPhoto, I am not certain whether I need to load the originals and the edited versions. I suspect that just the latter is sufficient. If I set PhotoShop as my external editor, I presume that iPhoto will keep track of all changes moving forward. However, over 23,000 images in iPhoto makes me twitchy and they are appear hidden within iPhoto. In the past, I have experienced syncing problems with, and database errors in, large databases. If I break up the images into a number of projects, I loose the value of Faces reaching back over time.
Some guidance and insight would be appreciated. I have a number of Faces questions which I will save for later.

Bridge and Photoshop is a common file-based management system. (Not sure why you'd have used ACDSEE as well as Bridge.) In any event, it's on the way out. You won't be using it in 5 years time.
Up to this the lack of processing power on your computer left no choice but to organise this way. But file based organisation is as sensible as organising a Shoe Warehouse based on the colour of the boxes. It's also ultimately data-destructive.
Modern systems are Database driven. Files are managed, Images imported, virtual versions, lossless processing and unlimited editing are the way forward.
For a Photographer Photoshop is overkill. It's an enormously powerful app, a staple of the Graphic Designers' trade. A Photographer uses maybe 15% to 20% of its capability.
Apps like iPhoto, Lightroom, Aperture are the way forward - for photographers. There's the 20% of Photoshop that shooters actually use, coupled with management and lossless processing. Pop over to the Aperture or Lightroom forums (on the Adobe site) and one comment shows up over and over again... "Since I started using Aperture/ Lightroom I hardly ever use Photoshop any more..." and if there is a job that these apps can do, then the (much) cheaper Elements will do it.
The change is not easy though, especially if you have a long-standing and well thought out filing system of your own. The first thing I would strongly advise is that you experiment before making any decisions. So I would create a Library, import 300 or 400 shots and play. You might as well do this in iPhoto to begin with - though if you’re a serious hobbyist or a Pro then you'll find yourself looking further afield pretty soon. iPhoto is good for the family snapper, taking shots at birthdays and sharing them with friends and family.
Next: If you're going to successfully use these apps you need to make a leap: Your files are not your Photos.
The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
When you process an image in iPhoto the file is never touched, instead your decisions are recorded in the database. When you view the image then the Master is presented with these decisions applied to it. That's why it's lossless. You can also have multiple versions and waste no disk space because they are all just listings in the database.
These apps replace the Finder (File Browser) for managing your Photos. They become the Go-To app for anything to do with your photos. They replace Bridge too as they become a front-end for Photoshop.
So, want to use a photo for something - Export it. Choose the format, size and quality you want and there it is. If you're emailing, uploading to websites then these apps have a "good enough for most things" version called the Preview - this will be missing some metadata.
So it's a big change from a file-based to Photo-based management, from editing files to processing Photos and it's worth thinking it through before you decide.

I've just came on board from Andriod and need massive help with the Contacts application any one out there willing to help the 'noob'?

I had the folks at the store port over all of my contacts from my old
ratty Andriod phone to my new shiny iPhone.
however all 200+ of my contacts sort of "shook" out,
meaning say John Smith, on my old phone,
had in my contacts the following:
John Smith
123 Main St. Anytown, Anystate USA
555-826-4879 home
555-799-4247 cell
[email protected]
johnsmith@facebook
all nice and neat on my andriod but when it ported over
all that information was just scattered all over my contacts sort of like:
john smith, smith john
john smith 123 main st. etc.
johhn smith home 555 etc.
john smith cell 555 etc.
john smith johnsmith@ etc.
etc.
so for all those 200+ contacts in my phone, I've got a zillion of them now...
so I'd like to get this all back in order before I and Siri explode.
I know nothing, and I know even less about outlook and the sort.
But I do know I am in Dire need of help with this... I figured that eveything else
involving iphones and apple in general was supposed to be cake but it seems
like this is the only thing that isn't cake at all... unless, I'm just a right idiot. (which is possible, hence spelling and grammatical issues).

I believe I've tried to sync it with google, but it didn't seem to take
muchless take my calender. it seems to favor my facebook calender
more over my google calender, but Siri seems to be helping me re-write
it...but that's not the game here, it's the contacts. I've tried to export
the cvp (??) list and import it into my iTunes account. However, It only
doubled my issue because it didn't over write my existing contacts.

MOVED: [Athlon64] Need Help with X64 and Promise 20378

This topic has been moved to Operating Systems.
[Athlon64] Need Help with X64 and Promise 20378

I'm moving this the the Administration Forum. It seems more apporpiate there.

Need some help with a Macally enclosure and a spare internal drive

Need some help with a Macally enclousure
Posted: Oct 1, 2010 10:55 AM
Reply Email
Aloha:
I have a Macally PHR-S100SUA enclousure that does not recognise,my WD 1001fals hard drive. It has worked just fine with other internal drives, but not this one?
This is a spare internal drive that I am trying to make an external drive to store back ups for a lot of data. But so far I can not get it recognized by the computer. Maybe I need different drivers?
Any suggestions?
Dan Page

Hi-
Drivers aren't typically needed for external enclosures.
Macally has none listed for that enclosure.
The same is true for the WD drive, internal or external; no drivers.
With the exception of high end PM multi drive enclosures, I can't think of any that use drivers.
How is the external connected?
Have you tried different cables, different ports?
Bad/damaged cables are fairly common.
Have you verified connections inside of the enclosure?

Need ugent help with APC and ICW

Similar Messages

Maybe you are looking for