Need UK plug clip for Power Up adapter

I have a Nokia JBL Power Up speaker which comes with a 18v 2a power adapter. But I only have the adapter clip for the USA mains pins, and need one for the UK.
Does anyone know where I can obtain the UK pin adapter, or if anyone has one spare (e.g. non-UK users that got the UK pins with their adapter) could sell me it?
Many thanks!

Seem to sell a lot of these: http://www.ebay.co.uk/itm/18V-Mains-AC-DC-Adaptor-Power-Supply-Charger-UK-Plug-JBL-Stage-Speaker-/11...
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

I have firefox and I went to download my movies on a website and it won't download them because I need IE plug-in for Firefox for the 5.0 version need help on this one.

I have a new computer and it has firefox on it of the 5.0 version and I went back to go download my movies from Blockbuster.com and I couldn't download them because I needed a IE plug-in for Firefox and the 5.0 does not work with it I need to go back and find if I can get a download of 4.0 version of firefox so I can get the IE plug-in for Firefox so I can download my movies.

- Try going to Setings>Store and sign out of the account and then sign back in.
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears

Nano G6 needs reveiver plug-in for wearing polar wearlink+nike+?

Only what i want is to checking heart-rate while working out.
If i buy a "Polar WearlinkNike" transmitter for checking heart rate when workout at gym.
Do i also need to buy the receiver(of nike+ipod SportKit) to plug into the dock connector on iPod nano G6 or G5??
PS.
I don't want and it doesn't need the nike+apple wireless sensor(the red&white round-shape one) in my shoes. (i don't wear Nike at all)

You do need to plug in the receiver in the 6G Nano iPod to use the Polar Wearlink+.
I just bought the iPod Nano (6th G, touch nano) and I coupled the Polar HRM Wearlink + in the Nike+ iPod settings. It was actually a non brainer. Plug the receiver in, let the iPod link with the HRM, and done. Same with the sensor in my Nike+ shoe.
Both of them work. I'm so glad to have this come together. The Polar Wearlink+ is cheaper then buying the whole Polar package (with watch etc). Of course, the iPod costs you also 159€, but then you can beam your workouts to the Nike+ website, which is very nice to follow your workouts. When you did the workout, what you did at the moment (run your longest, run the most calories etc).
Now that I tested it just by walking around and have a little run for a few meters, I cannot wait to get it to work.

The latest firefox 33.0 doesn't display the tamper data plug-in. I need the plug-in for research purposes

I had to use the tamper data plug-in for my assignment in Software security course. The plug-in has installed correctly but it is not being displayed. Am I doing it any wrong or else is there a problem with the new firefox?

Have you been using the Tamper Data extension in an earlier version of Firefox?
Is the problem that there is no visible way to call up or configure Tamper Data? I don't use this extension myself, but generally speaking, you could check the following locations:
(1) Tools menu
To display the classic menu bar temporarily, tap the Alt key. To make it persistent, after tapping Alt, use View > Toolbars > Menu Bar
(2) Developer Tools menu - in case it now integrates here
* "3-bar" menu button > Developer
* menu bar: Tools > Web Developer
(3) Unused buttons - in case it has a button that just isn't on any toolbar
Use the Customize feature to check the available buttons and drag to the desired location. See: [[Customize Firefox controls, buttons and toolbars]].
Can you find a way to run it?

I am trying to listen to a webcast from a conference. I am told I need a plug in for Firefox. I can listen on Explorer nine without a problem. What plugin do I need for 3.6?

I just purchased a new HP computer with windows 7. I installed 3.6. which I use as a default and had no trouble until I tried to listen to a webcast from the BMO metals and mining conference. When I clicked on listen to webcast I got a message tha tadditional plug ins were needed to display all the media on the page. I checked my system and was able to hear the test message, but I could not hear the actual webcast.
There was a box in the message saying click here to fins needed plug ins. When I clicked on it I got a screen saying no plug ins found. I have windows media player installed. There was a space to click on to test sound system, and I heard to message on the test, but when I tried to hear the actual webcast I got the same plug in needed message.
I then tried to listen on Chrome and got the same result. I tried to listen on Explorer and was able to hear the webcast and got no message about plug ins needed.
Is this just a case where they won't accommodate firefox, or is there a plug in or add on that I can install so I can use firefox.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem.
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
It is hard to tell which plugin is needed to play that webcast. You appear to have Flash and WMP and Silverlight. Other popular but less used plugins are RealPlayer and QuickTime.
See:
* [[Popular plugins]]
* http://kb.mozillazine.org/Testing_plugins
You can check the page source to see which MIME type is specified for that content or post a link if that web page can be accessed publicly without authorization.

Final Cut Pro 10.1.3, My Cross Dissolve icon is black, I have tried many option but I cannot get it to function. Do I need another plug in for it to work? Help please.

Hi,
I am trying to do a very basic cross dissolve in final cut pro 10.1.3. One thing I have noticed is that al a lot of my icons in the transitions sections are black. Is this normal? I can' t find much on this. When I drag the transition onto the clip a message comes up saying, 'There is not enough extra media beyond clip egdes', It asks do I want to over lap to create the transition. I say 'Create Transition', but it doesn't. Any thoughts appreciated.

Curiously, this picture I can see :-)
The dialog is quite normal. It just means what it says, namely, there is not enough extra media at the edges of the clips (so called "handles") to be used for the transition, so FCP X needs to shorten some of those clips to create the handles - thus the total length of your timeline will decrease.
But the fact that the transition appears as black in the browser, and that it is not applied, show that there is definitely something wrong.
Since these default transitions are installed as part of the application itself, I believe the best course of action is to delete FCP X (use FCS Remover to completely remove all traces of the application), and then install afresh from the purchases section of the App Store.

Do we need a separate license for using Apps adapter (shippd with SOAsuite)

This message was posted in the adapters forum.
Oracle Applications Adapter Licensing
Reposting here
Oracle Product Licensing is so complex that I need to like to have some guidance from fellow SOA users.
1) Can anybody tell me how is Oracle Application Adapter is licensed?
2) Is it licensed by the server (processor License) on which it's installed ( e.g BPEL Server) ?
3) Or is it licensed by the TARGET DB that this Apps Adapter going to connect ?
I am sure there are people who have bought Apps Adapter and there input would be appreciated.
Regards
Amit

The Oracle Apps Adapter is a seperate license. It is sold per CPU and it depends on the # of CPUs of the SOA/BPEL server -- not the # of CPUs of EBS that you have. Also, not all CPUs are created equal -- some have different multipliers. Your Oracle rep or an Oracle partner (like the one I work for) can help you figure it out.

Does Graphics2D need a plug in for viwing applets that use it?

Hi,
If an applet I write uses Graphics2D objects will people who view it on the internet need to download a plug-in to view the applet (as they do for applets using Swing)?
I am a novice so I would welcome any advice.
Thanks,
John

Yes. Graphics2D was added to the API in the java version 1.2, so you'll need the plugin just like with swing and the collection framework.
Note that people who use netscape 6 wont need the plugin :-)

I need an inlet fan for Power Mac G5

I have a Late 2004 Power Mac G5 that needs an inlet fan any good websites?

Hey Miles, Of course the fans work. Why would I offer a non working fan? Anyway I need some info as to which fan you need. They are all called inlet fans. There is the two in the back the two in the middle that slide out for access to the memory and the one up by the hard drive / optical drive bay. The fans are all off my now dead Power Mac G5 Quad 2.5GHz. This is the PCI-X Quad so the Fans all seem to be the same as the DP PCI-X Macs but not 100% sure. Do you know the part # you need? I'll take a pic and post once I get home from work.

Need a plug-in for CS5 Bridge (on Windows 7)

Hi. I have just replaced a dead hard drive and reinstalled CS5 from discs which went well until I tried to find the Bridge plug-in which reads camera/lens data and allows distortion corrections. Where can I find the right plug-in and how do I go about downloading and installing it? I shoot with a Canon 5D Mk II. Thank you.

You probably are referring to the Adobe Camera Raw (ACR) plug in. This should be automatically installed with your Photoshop CS5 version, it also works via bridge but still s a PS plug in. Be sure to have the latest updates for your PS version. You can open a Raw file in Bridge with the open command and this should open it in the ACR window using PS or use The Open in Camera Raw command to open in ACR hosted by Bridge.
On other files (jpeg and Tiff also can be opened in ACR) just open in PS and use the Filter Lens Correction.
Otherwise provide more details about versions and system.

File Name needs to be same for sFTP Advantco Adapter

Hi Experts,
I am using sFTP adapter provided by Advantco..
We want the same sender file name to be received at the receiver end..we have tried checking ASMA parameter in the receiver adapter. But, still the file name is being appended by message id.
Please suggest.
Thanks,
Sushama

I believed you checked the File Construction Mode option. Didn't you?
It will help others if you post the resolution description also

Need sample video clips for practice using iMovie 08

Can't find example video clips to download Anywhere. Thought would be easy since it's obvious new iMovie users would want. Any help directly appreciated.

Can't find example video clips to download Anywhere. Thought would be easy since it's obvious new iMovie users would want. Any help directly appreciated.
With iMovie 08 opened, select the "Video Tutorials" Help menu option. This will open the iMovie '08 Tutorial web page. Select a video to watch. If you must download a tutorial and have QT Pro, simply "Control-Click" the display area to open the context menu while the tutorial you want is playing. Select the "Save as Source" option, navigate to the folder where you wish to save the file, and press the "Save" button.

Avi file plug in for divx. what plug in do I need?.

I have no sound in avi files and get a message that I need a plug in for divx. what plug in do I need?.

I have both of these applications installed on my apple. Both the player and converter. I used MPEG Streamclip to convert a .mov file recorded on my iphone to an .avi file for playback on an internet website. After the file is converted there is no audio and I get an error message stating:
"You may need an additional video decoder to play this file.
This file contains a track in an unknown format (code ""). You may need to install a QuickTime™ component for this video format in order to play this file."
I purchased the pro version of divx to see if this addressed the issue but it did not. I'm concerned the pro version of flip 4 mac will be the same at $30.00 more dollars. Is MPEG Streamclip the problem?

Asking for power cable - help

I just ran the iPod updater 2006-01-10. The update went fine and at the end it said I need to plug the wall power cable into the iPod to complete the update.
Does anyone know a way around this? I do not have the power cord anymore. The updater did not mention this otherwise I would not have performed the update.
Any help is appreciated.
Thanks!

Have you tried plugging the iPod into your computer, locating your iPod on the desktop, then ejecting the iPod without disconnecting it from the USB connector?
If doing this works, you should see the iPod's screen go blank with a greyed out Apple icon with what looks like a thin curved upslash through it, then you should shortly see a progress bar indicating the iPod is updating.
Hope this works for you.

I need help identifying which Magsafe Power Adapter I need for my Macbook Pro Model A1398, EMC 2673?

I need help identifying which Magsafe Power Adapter I need for my Macbook Pro Model A1398, EMC 2673?

Provided the computer-end fits, you are free to use one with a HIGHER Wattage rating. No damage whatsoever will be done to any component, but it will likely run cooler (but may be slightly heavier).
If you use one with too LOW a Wattage rating, you will not be able to charge and run at the same time, and your computer's top speed (for its most intensive computations) will be limited.

Need UK plug clip for Power Up adapter

Similar Messages

Maybe you are looking for