Need update for Safari 1.3.2 for iMac G5 running Version 10.3.9

I have a newer version of Safari on my powerbook at home that I like, and wanted to upgrade to a newer version of Safari at my work computer too. There doesn't appear to be an ability to "update" or "Check for updates" on my current version of Safari.
I'm current using Safari 1.3.2 (v312.6) on my G5 with Version 10.3.9 .
If you can advise, please let me know. Thank you!

You have the most current release for your OS. To use a newer version would require you update to Tiger or Leopard OS.

Similar Messages

I have a laptop mac 3 years old i did not pay the extend warranty plan, so know i can't update the iPhone 5 because thai do not accepted a update for iTunes the new version what i have to do call to apple or make repair

i have a laptop mac 3 years old i did not pay the extend warranty plan, so know i can't update the iPhone 5 because thai do not accepted a update for iTunes the new version what i have to do call to apple or make repair

You need to be running Mac OS X 10.6.8 or newer to sync the iPhone 5; this may require buying a Mac OS X 10.6 DVD from the online Apple Store. OS upgrades aren't covered by the warranty.
(77198)

HT5429 When would an update for the "apple"'s version of maps come out? This is ridiculous.

When would an update for the "apple"'s version of maps come out? This is ridiculous.

Nobody knows until apple announces it.

I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).

I need to know which update(s) I can apply to help stabalize the system.

Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

Is there available for iMac OS X version 10.4.11 700 MHz Power PC G4 a wireless keyboard and mouse combo?

Is there a wireless keyboard and mouse combo anywhere available for iMac OS X version 10.4.11 700 MHz Power PC?

All the keyboards I'm finding require built-in Bluetooth, something G3 iMacs don't have. So you'd need to start with a Bluetooth USB adaptor like this:
http://eshop.macsales.com/item/IOGear/GBU321/
Its specs says it works with Mac OS 10.3.9 or newer. The you should ba able to add a wireless board and/or mouse IF you find one that has support for a Mac OS level older than 10.5 or an Intel processor. Most current boards require 10.5.8, and Intel processor, or both.
The cost for all this could easily be 4-5X the used market value of a G3 iMac so please think this through carefully. A long USB extension cable might be a better option fo such an old computer.

My Muse says it needs update but the adobe installer says i have the latest version ( I don't) what to do?

My Muse says it needs update but the adobe installer says i have the latex version ( I don't) what to do?

CC desktop lists applications as "Up to Date" when they are not
-http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html
-and added step https://forums.adobe.com/thread/1529654

Plug-in site says Shockway Flash vulnerable, needs updating. I did but says I already have new version. Still shows as vulnerable. Currently have version 11.0.1.152 . Update is for 10.3.183.11. Why is it still showing up being vulnerable?

Up above pretty much sums it up for me. Mozzilla Plug-in Site shows that Shockwave Flash is vulnerable and needs updating, when I click on it, it takes me to Adobe Flash Player and the version it wants me to update to is 10.3.183.11. But when I did that it stopped halfway through and told me that I do have an updated version installed and wouldn't complete. But when I went back to the plug-in page, it still shows Shockwave as being vulnerable and needing updated. Does anyone know why this is? I even double checked and went under Troubleshooting and it shows what I have installed and went to the plug-in section and it shows Shockwave as having version 11.0.1.152. But the version that it's telling me to update too is 10.3.183.11, so that would explain why when I tried to update it said I had the current version. But still shows me as being vulnerable. Thanks for any help you can give me.

Thanks again but when I went there I don't see the correct version to click on. Everything there just explains what it is and now I see something called IE after it some say 32-bit and 64-bit. I have know idea what those are.
I just usually go to my Mozilla plug-in site and update and never worry about what version it is because the system knows. You can tell I'm not a 'techy' person.
But apparently it's Adobe that's dropped the ball. I went back to their site and went to the new version and when you go directly there to download it pops up with the old version that's been telling me to update too which is 10.3.183.11. I tried going directly to support there but it ends up referring me to this type of support. Apparently if you want to call support up you have to pay to get actual tech support from them. In this case you shouldn't because they have it defaulting to the wrong update. I went to other sites as well but am afraid of downloading the wrong version. Actually, the site you sent me too showed someone else that did the same thing from there and it downloaded the wrong version too. So am hesitant to do it from there.
Guess I'll just hope that since I do have version 11.0.1.152 that it will work fine until they fix the update page.
Debbie

First of all i was told i needed updates for ipod,so i did this,and it wiped all my music off,but it still won't connect to my wi fi ?

I have an ipod touch and i wanted to get online while i was roaming,so i joined BT openzone which allows you to use other peoples wi fi,but ever since i joined i can't connect with my ipod,so went to the apple store and asked them,they said i needed updates,i got the updates which wiped my music off and it still won't connect,what do i do.

How could we possibly know what the problem is? Call your IT guy and ask him what he did.

Again macosx 10.4.6 update for imac intel

as i see im not the only one who has problems with it.. so, i have only a isdn connection (64 kbit) but it works fine.. so.. i couldnt download the update via macosx update service, so i downloaded it on the apple support site, with a download manager, because my provider cuts the connection every 8 hours. i have an imac 1,83ghz intel with 512mb ram etc..
everytime i try to install the update im able to get to the point "choose target volume" but thats it. i cant choose the macintosh HD as target volume, because there is an error message: "you cant install macosX update (intel) on this volume. this volume does not fulfill the qualifications for this update."
i have 123gigs free memory on the hd, the update takes only 436mb it says..
so.. i feel remembered to a meaningless windows error message...
thank you!

Hi Mario, my best guess.
You don't say what version of 10.4 you are on now but if it is 10.4.4 you cannot use the 10.4.6 update, as it is incremental, you need the 10.4.6 Combo Update for Intel.
Hence the message, "this volume does not fulfill the qualifications for this update"?
Best to take a disk to a friend with broadband or an Apple store as sig says.
-mj
[email protected]

How do I find updates for a particular firefox version on this website?

How do I find updates for particular versions of firefox?

However for 3.6.19 it was needed for Windows and Linux users as the 3.6.19 was really for Mac OSX 10.7 Lion users in mind to fix some crash issues caused by certain fonts.

ITunes update for the 11.4 version will not install

I have tried to download & install the latest update for iTunes and it keeps coming up with an error and suggests for me to install them manually. My windows is up to date. I have tried to install them manually but it won't. Any suggestions?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
The unlocker tool mentioned in the notes should be able to help remove all of the old files and folder prior to reinstalling which may get you past the error.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

OS X 10.7.3 WiFi Update for iMacs and Wake from Sleep Problem

http://support.apple.com/kb/DL1501
Apple has released a software update for those suffering from the iMac wake from sleep/wifi connection issue that resulted from updating to 10.7.3. It fixes the problem for me and several others. For those still suffering this issue, download it and see how it works!

To answer my own question it seems a workaround is to wake the iMac up using the power button rather than the keyboard. The WiFi reconnects this way.

No update for LG G2 to version 5.0 and it has been almost four months

I have the LG G2 D800. I haven't done anything to it like root or anything. I am still on version 4.4 and when I ask it to check software updates, it says I am up to date, but the 5.0 update rolled out OTA four months ago. I am concerned that I will not get the update for the stagefright attack bug.

your using the phone on ATT post pay?
Also there is no guarantee that lg will update a 3 year old phone. I look for them to go back 2 years max.

Graphics Firmware update for iMac with with NVIDIA GeForce 7300 or 7600 GT

I am one of the many with an 06 24" iMac that has the graphics card glitch. Downloaded and installed this firmware update today and worked all day with no issues. The update says it is for users that are running Windows 7 in boot camp.
Is this coincidental and the firmware fixed the issue so many of us have with these iMacs with the NVIDIA cards or did I just jinx myself and my problems are bound to return?
Guess I will know soon enough!
http://support.apple.com/kb/DL978

I've seen all sorts graphics problems mentioned. Apple sells millions of Macs per years, so any potential problem is bound to happen to at least a few customers. Assuming that people can read your mind is not a very good way to get responses.
On the other hand, if you describe the problem in detail, people reading the forum and looking for solutions may actually find your post through a keywords search, and your finding about installing the firmware update for Windows 7 may help then too, after confirming their problem is similar to your problem.
But that's up to you...

Need Link for Netweaver 2004S trial version for Windows 03

I want to install Enterprise Portal 6.0. To do this, I intend installing Netweaver 2004S (7.0) as portal comes bundled with this. The instllation will be on a windows server 2003 machine.
I am unable to find a trial version intallation for NW2004S for a windows 2003 server machine (64 bit). I found installations for NW2004S which run on linux machines.
I would appreciate if someone could send me a link for downloading NW2004S trial version either from marketplace or anywhere else. A link to the installation guide would also be helpful. Any suggestions are also very welcome.

Hi,
All corrective software packages, including Support Packages (Stacks) for SAP NetWeaver 7.0 and subsequent versions, as well as all applications which are based on this software (including SAP Business Suite 2005), released after April 2, 2007, will be available exclusively through the Maintenance Optimizer in SAP Solution Manager.
Follow the link below :
https://websmp110.sap-ag.de/solman-mopz
For the installation & master guide follow the link :
https://websmp208.sap-ag.de/instguidesnw
Thanks,
Nitesh Jain

Need update for Safari 1.3.2 for iMac G5 running Version 10.3.9

Similar Messages

Maybe you are looking for