Need Upgrade process document and PPT on Upgrade

Hello all,
I need an upgrade process document and PPT for presentation on upgrade.
I need really good stuff for presentation.
Thanks in advance. ofcourse points will be rewarded
Thanks.

>
Johnny_martins00 wrote:
> I've searched allready, but none of the related topic satisfied my question. All of them talked about the functionalities of both the tcode but none of them, that i've founded, said what's was the order of the process.
>
This was what you had asked in your earlier post ?
does any one knows a good manual or how to related to this transactions?

Similar Messages

PO invoice through IDOC --Need Standard Process code and Message Type

Hi All,
could any one send me SAP Standard Message type and SAP Standard process code for posting Vendor PO invoice.
Thanks
Raghu

Hello,
Standard Message type: INVOIC, Process Code: INVL, IDOC type INVOIC02.
Thanks,
Venu

Process Chain and e-mail configuration

We have configured a process chain e-mail message recipient by keying in the full recipient e-mail address in the message screen. This works successfully.
However, we would prefer to use the SAP User ID in the process chain message configuration. (The sap User Id would contain the external e-mail id)
Why: Because we do not want to have to reconfigure the process chain every time a user or an e-mail changes. We would like to use a generic user in the process chain configuration, and then only change the generic user e-mail when changes occur.
When trying to use the sap user id in the process chain no mail message is received.
We would like to seek input from folks in this forum who may have worked with a similar scenario and have developed a solution, or could provide suggestions on how to make this work.
Thanks in Advance

Barbara,
          Mine all work fine on WLS or Jserve, maybe you should include a code snippet??
          Barbara Singer wrote:
          > Hello:
          >
          > We have some simple servlets that need to process forms and bundle this
          > information up in a SMTP message. This is very basic stuff but we can not
          > seem to get this to work with WebLogic AppServer 4.51. I've built the
          > sample servlet /examples/servlets/MailServlet and this does not work either.
          > It also throws now exception. I can see it connect to the SMTP server ans
          > send the information but nothing comes through.
          >
          > I also read in your documentation that /utils/sendMail will be a deprecated
          > method in a future release. Is it still supported in 4.51?
          >
          > Any input, sample examples working, etc. is welcome.
          >
          > /bas
          Russell Castagnaro
          Chief Mentor
          SyncTank Solutions
          http://www.synctank.com
          Earth is the cradle of mankind; one does not remain in the cradle forever
          -Tsiolkovsky

Follow-up document and Status profile

Dear experts,
In CRM, I can create a follow-up quotation from a service process by using the Create Follow-up button.
I'd like to be able to create a follow-up quotation only for specific statuses in the service process document and to be unable to create a quotation as a follow-up document for the others statuses.
Can I configure the status profile (user status and transaction control) in order to achieve this result? Any help would be greatly appreciated.
Thanks in advance,
Stephanie

Hi,
Is there a way to block the creation of a follow-up document for a specific status?
For example, if status = A or B, i can create a quotation as follow-up document and if status = C, I can't.
Is it possible via customizing or is it an enhancement?
Thanks for your help,
Stephanie

Process dimensions and Applications after Restore

We are using BPC 7.0MS. We need to process dimensions and Applications after the database restore in case of any Optimization failures. It takes around 3 hours for us to do this process. Can we skip the BPC process by taking backup of Database and SSAS and restoring them in case of any failures?
Thanks
Raj

Hi Raj,
you can try but remeber that after the restore you must execute a "modifiy application" for all your applications so maybe you'll not gain time.
Kind regards
Roberto
Edited by: Roberto Vidotti on Dec 12, 2011 3:33 PM

I have currently 4.9 pages and I tried to open a document and I get a message that I have to purchase an upgrade of $19.99 is this correct?

I have currently 4.9 pages and I tried to open a document and I get a message that I have to purchase an upgrade of $19.99 is this correct?

You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5/5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
Pages 5.1 sometimes can not open its own files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has not only managed to confuse all its users, but also itself.
Note: Apple has removed over 95 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

I have a mac book pro with Boot Camp that also runs windows. I upgraded to Lion and somehow it crashes the mac side peridoically. I am told I need to "clean" it and reinstall lion using the recovery drive. will that delete the windows partition too??

I have a mac book pro with Boot Camp that also runs windows. I upgraded to Lion and now the mac side crashes/freezes periodically, especially iphoto. I am told by the genius' that I probably need to "clean" it and reinstall lion using the "recovery drive" which resets everything back to default and reinstalls the lion operating system. My question is will this also delete the "windows" partition drive and all that data too. If so that will be a huge pain in the ___ to back up and reinstall boot camp and windows. I want to shoot the lion.

There is no system like Acronis for the Mac platform. You can try using the buiilt in Disk Utility to create an Image of the complete Mac drive but I have found that this does not work very well as on tryiing to restore it gives errors sometimes.
You can use SuperDuper or Carbon Copy Cloner to create a bootable Clone of your system partition. But that is only for the System partition and not the complete drive.
If you use Boot Camp to install Windows on your Mac neither of those two programs will clone the Windows side.
Neither will Disk utility as Mac's can not create or write to a NTFS partition. So some other program is need for that.

I want to upgrade my MacBook Pro 5,2 to Lion, but specs says i need intel core 3 and i have intel core 2, there will be a problem? my computer will run slow? I will need to reinstall my programs again?

I want to upgrade my MacBook Pro 5,2 to Lion, but specs says i need intel core 3 and i have intel core 2, there will be a problem? my computer will run slow? I will need to reinstall my programs again?
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,2
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.8 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          8 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP52.008E.B05
SMC Version (system):          1.42f4
Sudden Motion Sensor:
State:          Enabled

Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.
Application Compatibility
Applications Compatibility (2)

Office Web Apps Issue - "Sorry, something went wrong" message when opening a document (any MS docx,ppt etc) in IE. With Chrome, it pops (Microsoft Office needs your permission) message and on RUN, it opens the document.

When opening any Microsoft documents ( docx, ppt etc) in SharePoint 2013,
Internet Explorer behavior : "Sorry, something went wrong" An unexpected error has occurred message and then nothing happens.
In Chrome : Pops (Microsoft Office needs your permission) message and on clicking RUN, it opens the document.
In Firefox : the documents opens, after asking which application do you want to use to open it.
The feature (Open Documents in Client Applications by Default) is not activate.
Why the MS documents are not working in IE 10?

Hi,
According to your post, my understanding is that you failed to open Microsoft documents in SharePoint 2013.
I recommend to Run the following PowerShell in OWA Server :
Remove-OfficeWebAppsHost # To Remove any restriction
Or
New-OfficeWebAppsHost -Domain <String> # To allow specific domain Name
In addition, you can allow OAuth via HTTP using the following commands:
$config = (Get-SPSecurityTokenServiceConfig)
$config.AllowOAuthOverHttp = $true
$config.Update()
Here are two similar articles for you to take a look at:
http://blogs.msdn.com/b/fabdulwahab/archive/2013/10/30/office-web-apps-with-sharepoint-2013-issues.aspx
http://stevemannspath.blogspot.in/2013/03/sharepoint-2013-office-web-apps-issue.html
Best Regards,
Linda Li
Linda Li
TechNet Community Support

I have a i mac 10.5 Leopard, processor speed 2.66GHz, Memory 4GB, Bus Speed 1.07, Boot ROM 1M91.008D.B.08. This is the problem I need to download adobe flash 14.0 so I can open up an ebook for school, so I need upgrade to a 10.9 and I don't know how

I have tried to down load the upgrade but it come back saying I need maverick 10.9 and that is what I am trying to download.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Just installed Mac OS X 10.8.5 on a Mac Pro 2010 platform. The App Store shows there is an upgrade, so I click the download button. After about 2 hrs the process stops and an Error (102) appears on the screen. Any idea what goes wrong? THX

Just installed Mac OS X 10.8.5 on a Mac Pro 2010 platform.
The App Store shows there is an upgrade, so I click the download button.
After about 2 hrs the process stops and an Error (102) appears on the screen.
Any idea what goes wrong?
THX

ahstephen wrote:
Thank you for the response.
The upgrade I'm interested is for OS X v.10.8.5...
...The App Store page shows 2 different upgrades:
Mountain Lion (10.8.5) Software Upgrade, and
Yosemite FREE upgrade
If the App Store is showing 10.8.5 as an update, what do you currently have installed? The final update to Mountain Lion was 10.8.5, and since the basic OS installation of Mountain Lion is no longer offered in the App Store, that would suggest you're currently at an earlier version of Mountain Lion - 10.8.x where x=less than 5. If that's the case, I'd suggest getting the 10.8.5 update. There is also a Supplemental Update for 10.8.5 and that may be what the App Store is offering.

I upgraded to Mountain from Snow and find that there is now a problem adding iphoto to the cloud. I have iphoto '08,version 7.1.5. Tried to follow one poster's advice and upgrade to 9.1 but I need 9.0 first and I can't find that. suggestions? thanks!

I upgraded to Mountain from Snow and find that there is now a problem adding iphoto to the cloud. I have iphoto '08,version 7.1.5. Tried to follow one poster's advice and upgrade to 9.1 but I need 9.0 first and I can't find that. suggestions? thanks!

You have to buy iPhoto from the Mac App Store.

Have Firefox 8.0.1 and Mac OS 10.6.8, do I need upgrade to Firefox 9.0.1 ?

Have Firefox 8.0.1 and Mac OS 10.6.8, do I need upgrade to Firefox 9.0.1 ?

Yes you should, you should always keep your browser, plugin and other software up to date, latest version are less buggy, fixed ton of crash, and fix some performance issue, so if you need best result, you should always keep your browser up to date.:)

Tried to use Iphoto and was told I needed upgrade. Try to install upgrade . Upgrade should take an hour if photo library is large. It's now close to three hours and still upgrading. Can't use Iphoto and don't want to stop if still upgrading...3hours??

Tried to use Iphoto and was told I needed upgrade. Try to install upgrade . Upgrade should take an hour if photo library is large. It's now close to three hours and still upgrading. Can't use Iphoto and don't want to stop if still upgrading...3hours??

You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
Once you are using the "Firefox" button ...
Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

Need Clarification On Unicode and Upgrade-ECC6.0

Dear All,
I need some clarification unicode and upgrade . It would be great help if you give your time .
We had 2 code pages - 1100,1401 in 4.6B system. We had languages - FR,EN,ES,PT and PL. The system has been upgraded to ECC6.0 non-unicode now.
Now in I18N->System configuration (RSCPINST), only EN is listed. SPUMG asked for activation of I18N to proceed. When the I18N activation was done, it has knocked out the code page 1401 from TCPDB table.
Is this normal?
But, the code pages 1401 is shown as consistent in SCP transaction.
The system setting has changed to Single code page. Will this affect unicode migration? How did the additonal code page 1401 which was in 4.6B get knocked out
now? How did the languages ES,FR,PT, IT and PL which were in 4.6B get knocked out of RCPINST?
We are manually filling the vocabulary since SPUMG is not showing Scanning tabs. The language key in vocabulary is not completely set. The reprocess logs are not completely green. Will this allow unicode migration now? Can we start unicode migration even with this status.
Regards,
Santosh
Edited by: santosh suryavanshi on Nov 18, 2010 11:11 PM
Edited by: santosh suryavanshi on Nov 18, 2010 11:11 PM

Hi Santosh,
SAP ECC 6.0 is not supported with MDMP. This is the reason for the behaviour in RSCPINST.
The standard way for an upgrade based on start release 4.6B with MDMP would be TU&UC (see SAP note 959698).
Do you follow this procedure ?
Best regards,
Nils Buerckel
SAP AG

Need Upgrade process document and PPT on Upgrade

Similar Messages

Maybe you are looking for